Marlin_Firmware

Author	SHA1	Message	Date
Scott Lahteine	3ce0c5063f	Merge pull request #3183 from thinkyhead/rc_lcm1602_support Also closes #3181.	2016-03-19 19:28:50 -07:00
CoderSquirrel	eda95d8bed	Add support for LCM1602 16x2 I2C LCD adapter	2016-03-19 19:26:44 -07:00
Scott Lahteine	59483221d5	Move stepper DAC to a separate file	2016-03-19 19:24:26 -07:00
Scott Lahteine	5d0570cea0	Make digitalPotWrite depend on HAS_DIGIPOTSS	2016-03-19 19:24:26 -07:00
Scott Lahteine	f96bc03081	Add M907-M910 g-codes support for Printrbot Rev. F	2016-03-19 19:24:26 -07:00
Stephanie	6843b78f99	Add support for Printrboard RevF The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control. The Pins file for the RevF board is included.	2016-03-19 16:43:37 -07:00
Petr Zahradnik	98392782ea	Update Configuration.h	2016-03-19 20:45:13 +01:00
Petr Zahradnik	daa52124b0	Update language_cz.h	2016-03-19 20:43:28 +01:00
Blue-Marlin	3166aed087	Improve the descriptions for THERMAL_PROTECTION	2016-03-19 14:08:59 +01:00
Scott Lahteine	a02ae36ae8	Include M65 "ABC" parameters in EEPROM Addressing #2773	2016-03-19 05:52:20 -07:00
Scott Lahteine	cf7c444aff	Apply unknown_position_error elsewhere	2016-03-19 05:13:40 -07:00
Scott Lahteine	eda5190581	Check for known position in `M48`	2016-03-19 05:13:40 -07:00
Scott Lahteine	68085ca855	Updated M48 friendly for DELTA Partial implementation with reference to MarlinFirmware/Marlin#3011	2016-03-19 05:13:40 -07:00
Scott Lahteine	6a3529247f	"Homing" as a translatable string	2016-03-19 04:41:03 -07:00
Scott Lahteine	c97c2dcaf7	Use const parameters instead of static casting Alternative fix to #3149	2016-03-19 03:36:53 -07:00
Scott Lahteine	38b0082bf2	Additional tweaks to M42 exit conditions	2016-03-19 03:10:18 -07:00
Scott Lahteine	4bbea5124d	Support for multiple PWM fans	2016-03-19 03:10:18 -07:00
Scott Lahteine	637cc03686	Fix M109 so it won't wait for cooling Addressing issue #2767	2016-03-19 03:00:58 -07:00
AnHardt	3f45a1acf9	Check probes only when deployed Aim: Test probes in update_endstops only when activated Changes: Configurations Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message. Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin Add some comments Shift some entries to have related things together. Conditionals.h We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined. SanityCheck.h Add some tests if the probe is connected and if we have defined a probe. stepper.cpp Changes to test the probe only when it is deployed (z_probe_is_active). Test update_endstops() when the probe is deployed. MarlinMain.cpp a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled() b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402 c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions. d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop. To do: In another PR. handle all probes in deploy/stow_z_probe. Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.	2016-03-19 02:00:08 -07:00
Scott Lahteine	4634feaeab	Merge pull request #3012 from thinkyhead/fix_command_injection Use a serial line buffer to prevent queue corruption	2016-03-19 01:43:54 -07:00
Scott Lahteine	9bf87aac6a	Merge pull request #3127 from thinkyhead/rc_core_babystepping Implement BABYSTEPPING for COREXY and COREXZ	2016-03-18 23:25:26 -07:00
Scott Lahteine	4ae03df5c2	Merge pull request #3109 from thinkyhead/rc_host_keepalive Provide feedback to hosts when busy	2016-03-18 23:22:29 -07:00
Scott Lahteine	963a92ceda	Patch idle forevermore	2016-03-18 22:38:35 -07:00
Scott Lahteine	7ec7bb31c4	Send a Busy signal to hosts during long processes, wait for input, etc If Marlin is blocking the serial input or command queue for any length of time (for example more than 2 seconds), it needs to send a message to serial out to inform the host that it is busy. Marlin should only send these messages out when busy, and preferably not when trying to print formatted output.	2016-03-18 22:38:35 -07:00
esenapaj	8d580ea7e8	follow-up the PR #3114 follow-up the commit `d56c6af24e`	2016-03-19 13:17:34 +09:00
Scott Lahteine	d9e1f22682	BABYSTEPPING requires ULTRA_LCD	2016-03-18 18:22:53 -07:00
Scott Lahteine	e5fd43f343	Implement BABYSTEPPING for COREXY and COREXZ	2016-03-18 18:22:53 -07:00
Scott Lahteine	80277cc9c8	drain_queued_commands_P now returns true if there are more	2016-03-18 17:56:48 -07:00
Scott Lahteine	8fe7420310	Use a separate serial line buffer	2016-03-18 16:46:20 -07:00
Scott Lahteine	7d25c107a8	Merge pull request #3149 from esenapaj/patch-1 suppress warnings	2016-03-18 15:40:14 -07:00
Scott Lahteine	d56c6af24e	Merge pull request #3114 from thinkyhead/rc_reverse_lcd_menu Option to reverse the click-wheel direction in menus	2016-03-18 15:39:29 -07:00
Scott Lahteine	cc291aeb3c	Move definition of "blink" to main ultralcd file	2016-03-17 18:19:05 -07:00
Scott Lahteine	e7e1866589	Merge pull request #3161 from Alex9779/fix_InitialExtruderDirection Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first	2016-03-16 12:58:10 -07:00
Scott Lahteine	57e82cacc9	Merge pull request #3156 from esenapaj/patch-3 Fix CardReader::lsDive()	2016-03-16 12:48:22 -07:00
Alexander Leisentritt	4338813814	save last extruder and set stepper directions too in case the extruder changed fixes MarlinFirmware/Marlin#3144 and MarlinFirmware/Marlin#3083	2016-03-16 20:20:34 +01:00
Scott Lahteine	8f24475e02	Simplify limiting encoderLine in END_MENU	2016-03-16 04:05:41 -07:00
Scott Lahteine	fbef2f5b61	Implement reverse menu direction in ultralcd.cpp	2016-03-16 04:03:49 -07:00
Scott Lahteine	b8b51d8da8	Add the REVERSE_MENU_DIRECTION option	2016-03-16 04:02:40 -07:00
Scott Lahteine	999a76dbdf	Merge pull request #3157 from esenapaj/patch-4 Use variable in lcd_erase_line()	2016-03-16 02:46:42 -07:00
Scott Lahteine	e8fa843c2d	Merge pull request #3164 from epatel/epatel/RCBugFix Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z	2016-03-16 02:40:54 -07:00
Scott Lahteine	fc04b587cf	Merge pull request #3147 from thinkyhead/rc_stringify_macro Promote STRINGIFY to macros.h	2016-03-15 17:37:03 -07:00
Scott Lahteine	d7c6fd5c2f	Merge pull request #3146 from thinkyhead/rc_enabled_true_false Support "true" and "false" in the ENABLED macro	2016-03-15 17:35:55 -07:00
Edward Patel	cb0dbfa3b5	Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z	2016-03-16 01:26:00 +01:00
esenapaj	a15c5d222a	Use variable in lcd_erase_line() lcd_erase_line() is called with argument, but the argument is ignored by lcd_erase_line().	2016-03-16 02:59:06 +09:00
esenapaj	609c0d46d9	Fix CardReader::lsDive() If comparison between signed char(-128 ~ +127) and DIR_NAME_DELETED(uint8_t const 0XE5, it's +229), it makes incorrect result.	2016-03-16 02:47:58 +09:00
Scott Lahteine	2ef49a9d53	Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT Addition to #3140	2016-03-15 03:49:44 -07:00
Scott Lahteine	eb8cf29464	Merge pull request #3151 from hydrocat/RCBugFix Uptades the pt-br translation	2016-03-15 02:46:46 -07:00
Scott Lahteine	6e1bc03d3b	Additional wrapping for #3140	2016-03-15 01:18:58 -07:00
Scott Lahteine	cc9968f893	Patch spacing in #3140	2016-03-15 01:18:58 -07:00
Scott Lahteine	1c384930f3	Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion Wrap macros to prevent bad expansions	2016-03-15 00:25:34 -07:00
VITORIO MIGUEL PRIETO CILIA	de2cca73ac	Uptades the pt-br translation	2016-03-14 21:16:57 -03:00
esenapaj	a4314c4907	Use local variable in recalc_delta_settings() diagonal_rod hadn't been used anywhere.	2016-03-15 06:47:27 +09:00
esenapaj	8de7a6f9b1	suppress warnings	2016-03-15 06:34:02 +09:00
Scott Lahteine	9418b4f2f3	Promote STRINGIFY to macros.h	2016-03-13 23:15:17 -07:00
Scott Lahteine	4b648793f2	Use ENABLED with DISABLE_[INACTIVE_][XYZ]	2016-03-13 22:15:45 -07:00
Scott Lahteine	73a59a4e45	Allow ENABLED(b) to work with "true" and "false"	2016-03-13 22:15:01 -07:00
Blue-Marlin	c73f1b2471	Extend stack_overflow_protection for lcd_move_e and _lcd_level_bed Extend stack_overflow_protection for lcd_move_e() and _lcd_level_bed() with a refined method of 3050.	2016-03-13 13:59:44 +01:00
Scott Lahteine	f4a3efd35e	Merge pull request #3116 from thinkyhead/rc_fix_value_edit_bug Fix value edit click bug	2016-03-13 04:08:43 -07:00
Scott Lahteine	3f5fbbd398	Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography Update the bed topography output done by G29	2016-03-13 03:51:43 -07:00
Scott Lahteine	c16c47954c	Merge pull request #3141 from esenapaj2/RCBugFix follow-up the PR #3131	2016-03-13 03:37:39 -07:00
Scott Lahteine	30c3a21d1f	Merge pull request #3112 from thinkyhead/rc_support_MAX31855	2016-03-13 03:30:48 -07:00
Scott Lahteine	81d759efb6	Merge pull request #3138 from jbrazio/bugfix/m109-r-could-wait-forever	2016-03-13 03:26:34 -07:00
Scott Lahteine	2179f598bf	Merge pull request #3122 from thinkyhead/rc_group_filament_change	2016-03-13 03:25:38 -07:00
Scott Lahteine	62a9b9902d	Merge pull request #3133 from thinkyhead/rc_machine_uuid_in_m115	2016-03-13 03:23:54 -07:00
Scott Lahteine	f928894c38	Merge pull request #3132 from thinkyhead/rc_heating_failed_err	2016-03-13 03:23:14 -07:00
esenapaj2	236a44c83b	follow-up the PR #3131 follow-up the commit `7326d63ce0` update Configration_adv.h of Hephestos2 delete unnecessary spaces	2016-03-13 19:12:39 +09:00
Scott Lahteine	f9ded2a7c4	Wrap macros to prevent bad expansions	2016-03-12 22:38:55 -08:00
jbrazio	a645860431	All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()	2016-03-12 07:16:39 +00:00
jbrazio	1981e53d68	M109 R option if misused could cause a wait-forever situation	2016-03-12 06:24:24 +00:00
Scott Lahteine	7976e29399	Use MACHINE_UUID in M115 Addressing #2879. The M115 report should display `MACHINE_UUID` but it always displays `UUID`.	2016-03-11 05:34:48 -08:00
Scott Lahteine	81aab828e2	Fix a "Heating failed" error Addressing #3085. If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.	2016-03-11 05:07:48 -08:00
Scott Lahteine	0c48eaf3de	Expose motor current in more configs, disable by default	2016-03-11 02:25:36 -08:00
Elijah Snyder	e8b10d2836	Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT	2016-03-11 02:25:36 -08:00
João Brázio	4d4a842cfb	Update the bed topography output done by G29	2016-03-10 13:24:17 +00:00
Scott Lahteine	89838cdb10	Move step macros to stepper_indirection.h	2016-03-10 04:34:55 -08:00
João Brázio	793cd0ae3b	Clean up the code a bit	2016-03-10 11:52:43 +00:00
Scott Lahteine	27f244ba2c	Support MAX31855 as Temperature Sensor -3	2016-03-10 02:49:54 -08:00
Scott Lahteine	ce639b8b03	Group FILAMENT_SENSOR options together	2016-03-10 02:41:37 -08:00
Scott Lahteine	3fd31976c3	Reduce code in stepper.cpp with macros	2016-03-10 01:42:58 -08:00
Scott Lahteine	b45a0c4c60	Fix bugs in edit submenus so they return to origin Expected behavior: After editing a value the menu should return to the previous place with the edited item selected. Actual behavior: Either the top (back) item from the previous screen is selected, or the menu jumps up another level. Solution: Pass the correct arguments to `lcd_goto_menu` on click when editing a value.	2016-03-09 21:06:56 -08:00
jbrazio	986b508ff7	Print timer now stops when it sees the last extruder temperature being shutdown	2016-03-08 18:11:02 +00:00
AnHardt	fd5414c6ea	Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING rebased corrected spelling changed to #elif for error Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.	2016-03-08 17:50:23 +01:00
Scott Lahteine	b7928a000a	Merge pull request #3108 from AnHardt/M110+ M110 and M29 rework	2016-03-08 03:54:07 -08:00
Scott Lahteine	5cba0b4187	Merge pull request #3111 from thinkyhead/rc_drop_old_condition Drop obsolete test for leading "N"	2016-03-08 03:07:25 -08:00
Scott Lahteine	302d1bfbc4	Drop obsolete test for leading "N"	2016-03-08 02:25:11 -08:00
AnHardt	37b857e8ec	M110 ang M29 rework Add 'ok' output for G29 actually closing the file. Handle M110 when received without linenumber/checksumm.	2016-03-07 22:27:01 +01:00
esenapaj2	29e09c7c3e	update example configurations update old comments update or delete deprecated definitions complement forgotten updates adjust spacing some cosmetic changes	2016-03-07 22:03:33 +09:00
Scott Lahteine	fac85f6fa1	Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements Bugfix: G28 was lifting Z-axis multiple times	2016-03-07 03:52:00 -08:00
jbrazio	642e3699ce	Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero	2016-03-07 03:49:11 +00:00
Scott Lahteine	501f63802a	Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill Add Watchdog timer reset in kill()	2016-03-06 16:21:39 -08:00
Scott Lahteine	1002eb67c8	Update name of st_get_axis_position_mm in stepper.h	2016-03-06 15:46:39 -08:00
Jaroslav Škarvada	d229c58df6	Fixed Makefile to work with Melzi2 boards on arduino-1.6.x - also by default use ${HOME}/Arduino as install directory which may be more sane, especially with arduino packages provided by distributions - bump arduino version to 106 (this seems to be useless) - program firmware through the USB serial which is more comfortable way how to program the firmware - use 57600 programing speed by default which seems to be more reliable with arduino bootloaders (at least with those shipped with the Melzi2 boards) Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>	2016-03-06 20:12:01 +01:00
Jaroslav Škarvada	7dde761aa6	Fix MELZI_MAKR3D to use correct motherboard Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>	2016-03-06 19:33:33 +01:00
Scott Lahteine	eafbc5e0cc	Add AJ4P pins and fix RAMBO pins	2016-03-06 05:52:01 -08:00
Scott Lahteine	cf792fd8d8	Update configurations to use RAMPS 1.4	2016-03-06 05:52:01 -08:00
Scott Lahteine	cacf04f8a7	Base RAMPS-like boards on RAMPS 1.4	2016-03-06 05:52:00 -08:00
Scott Lahteine	50e3482e0a	Handle RAMPS 1.3 as the special case	2016-03-06 05:52:00 -08:00
Scott Lahteine	679be3294f	Rename RAMPS 1.3 pins for RAMPS 1.4	2016-03-06 05:52:00 -08:00
Scott Lahteine	f18d3f451a	Limit LCD move_to_x/y coordinates for deltas Related to MarlinFirmware/MarlinDev#270	2016-03-06 05:52:00 -08:00
Scott Lahteine	988332c67a	Cosmetic tweaks from dev	2016-03-06 05:52:00 -08:00
Scott Lahteine	2690d8568e	DOGLCD width/height in Conditionals.h	2016-03-06 05:51:59 -08:00
Scott Lahteine	614febaaf3	Fix acceleration limits See: https://github.com/Ultimaker/Marlin/pull/7	2016-03-06 05:51:59 -08:00
Scott Lahteine	13ef12ad3f	Fix power calculations As suggested by @max-pau in #3073 - #3074	2016-03-06 05:51:59 -08:00
Scott Lahteine	e2b022cce2	Include #3053	2016-03-06 05:51:59 -08:00
Scott Lahteine	5cba0210f2	Small patch to Z_SAFE_HOMING comment	2016-03-06 05:51:58 -08:00
Scott Lahteine	6165fd41a5	Fix Hephestos 2 and other configs	2016-03-06 05:51:58 -08:00
Scott Lahteine	71718d888a	Fix typos in check_axes_activity	2016-03-06 05:51:58 -08:00
Lukas Abfalterer	83795d3e63	deleted double used comments	2016-03-06 05:51:58 -08:00
jbrazio	143ad74db7	Update PROBE_OFFSET_FROM_EXTRUDER comment section in all example config files.	2016-03-06 05:51:58 -08:00
jbrazio	b0f5ba0232	Update the PROBE_OFFSET_FROM_EXTRUDE comment section This changes have being discussed at MarlinFirmware/Marlin#2849.	2016-03-06 05:51:57 -08:00
jbrazio	02b131b552	Replaced stock BQ PID values with fine tuned ones generated using M303	2016-03-06 05:51:57 -08:00
jbrazio	45dc8a51f3	Added readme file for bqh2 and disabled the SLOWDOWN config flag	2016-03-06 05:51:57 -08:00
Scott Lahteine	6a21180bd4	Implemented BQ ZUM Mega 3D board layout as an override to RAMPS 1.3	2016-03-06 05:51:57 -08:00
jbrazio	b18816fcbf	Fine tuned XYJERK. Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero.	2016-03-06 05:51:57 -08:00
jbrazio	be83036212	Applying suggestions by @thinkyhead at MarlinFirmware/Marlin#3049 . - Remove the forced activation of SDSUPPORT, I guess people may use the ZUM 3D board and not the LCD module. - Fixed the tab issue within boards.h file.	2016-03-06 05:51:56 -08:00
jbrazio	b82d91eca6	Added configuration example for the BQ Hephestos 2 3D printer. Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.	2016-03-06 05:51:56 -08:00
Scott Lahteine	45bcc43e48	Don't override SOURCE_CODE_URL in Default_Version.h - Defining `SOURCE_CODE_URL` in `Default_Version.h` overrides it elsewhere. So don’t define it there. - Also fix up `language.h` so no `#undef` will be needed.	2016-03-06 05:51:56 -08:00
Scott Lahteine	ef68c1910c	Check that the temperature is close to target	2016-03-06 05:51:56 -08:00
Scott Lahteine	ea9fd1200b	Fix M109 so it won't wait for cooling Addressing issue #2767	2016-03-06 05:51:56 -08:00
Scott Lahteine	e4945b30d2	sbi and cbi are deprecated	2016-03-06 05:51:55 -08:00
Scott Lahteine	ff13070b59	Use _BV macros, patch up others	2016-03-06 05:51:55 -08:00
Scott Lahteine	209f5f21e0	Use macros where possible Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros wherever possible.	2016-03-06 05:51:55 -08:00
Scott Lahteine	c8f76bb8aa	Create BITSET/BITCLR macros	2016-03-06 05:51:55 -08:00
Scott Lahteine	adc25db8c4	Merge pull request #3005 from thinkyhead/rcbugfix_eeprom Fix layout descr. in configuration_store.cpp	2016-03-06 00:31:44 -08:00
Scott Lahteine	e7cf85b922	Merge pull request #3013 from thinkyhead/esenapaj-patch-1 Enhanced #3010 - formal Mesh/Manual dependency	2016-03-06 00:30:02 -08:00
Scott Lahteine	6e64895c30	Merge pull request #3001 from AlwaysTinkering/RCBugFix Rc bug fix - Fix for issue #2931	2016-03-06 00:20:29 -08:00
Scott Lahteine	34b8b9f0f5	Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz Add CORE support to st_get_position_mm (and elsewhere)	2016-03-06 00:17:03 -08:00
Scott Lahteine	1e20949afb	Merge pull request #3092 from thinkyhead/rc_2860_printrbot_lcd Fix Printrboard with LCD (redo)	2016-03-06 00:14:29 -08:00
Scott Lahteine	f5972c4d2c	Merge pull request #2994 from AnHardt/Inerrup-save-serial Interrupt safe serial --- Guard against non-atomic variable changes from interrupt routines	2016-03-05 22:25:12 -08:00
Scott Lahteine	3a3d358df9	Fix Printrboard with LCD (redo) Based on #2860 - rebased for RCBugFix	2016-03-05 22:13:00 -08:00
Scott Lahteine	eb85342fd9	Merge pull request #2989 from AnHardt/fix2661 Pre home display - Stepper release	2016-03-05 21:30:17 -08:00
Scott Lahteine	14f3ca1b2e	Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix Apply bed leveling matrix when switching extruders	2016-03-05 21:23:25 -08:00
Scott Lahteine	91fcdc2b99	Merge pull request #3090 from thinkyhead/rc_spelling Various minor spelling corrections	2016-03-05 20:50:34 -08:00
Scott Lahteine	772460a7b8	Various minor spelling corrections Redo of #2939 rebased against RCBugFix	2016-03-05 20:41:15 -08:00
lrpirlet	0fb507a75d	correct raise_z_for_servo	2016-03-05 20:19:53 -08:00
Scott Lahteine	04a0d45c22	Merge pull request #2821 from MarlinFirmware/ReinitializeDisplay Fix status LEDs update when reinitializing the display	2016-03-05 15:31:49 -08:00
Blue-Marlin	b4e5e0f11d	Add Watchdog reset in kill() Add watchdog reset in the kill loop to simplify recovering.	2016-03-04 00:35:18 +01:00
Scott Lahteine	547d35a921	Merge pull request #3067 from Blue-Marlin/ALARM_PIN Remove unused ALARM_PIN	2016-03-02 20:20:26 -08:00
Scott Lahteine	79778d46d9	Merge pull request #3066 from Blue-Marlin/Fix-disable_all_heaters() Fix disable_all_heaters() for MAX6675	2016-03-02 17:35:08 -08:00
Blue-Marlin	a68228bf55	Remove unused ALARM_PIN Remove unused ALARM_PIN from all the Configuration.h's	2016-03-02 14:29:49 +01:00
Scott Lahteine	9eb4aceee4	Merge pull request #2986 from thinkyhead/enable_watchdog Enable USE_WATCHDOG by default	2016-03-02 05:29:42 -08:00
Blue-Marlin	0631541166	Fix disable_all_heaters() for MAX6675	2016-03-02 14:17:23 +01:00
Scott Lahteine	222d13d5ed	Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset Code cleanup in gcode_T	2016-03-02 03:45:40 -08:00
Scott Lahteine	186629aee8	Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix Fix Z_RAISE_AFTER_PROBING for non DELTA printers	2016-03-02 03:14:27 -08:00
Scott Lahteine	a42fb35c56	Merge pull request #3050 from Blue-Marlin/fix-1166 Temporary workaround for stack overflow	2016-03-01 11:33:19 -08:00
jbrazio	67e15aac3d	As pointed out by @Blue-Marlin the previous code would raise the Z axis twice for a servo based probe.	2016-03-01 00:22:48 +00:00
jbrazio	17cc2a9663	Z_RAISE_AFTER_PROBING value was being ignored by Marlin because raise_z_after_probing() was only called if the printer type was set to a DELTA or if the printer had a docking sled for the probe.	2016-02-29 15:48:26 +00:00
Scott Lahteine	252f4a75cd	Merge pull request #3043 from oxivanisher/RCBugFix Example configuration for Kossel XL	2016-02-28 23:57:13 -08:00
Scott Lahteine	fd1243c184	Merge pull request #3052 from thinkyhead/rc_fix_m145_eeprom_output Fix "M145" output in M503 report	2016-02-28 23:43:08 -08:00
Scott Lahteine	0bc648353f	Merge pull request #3031 from tnw513/RCBugFix Fix board type for Hephestos: RAMPS 1.4	2016-02-28 23:23:01 -08:00
AnHardt	f27c2b6b4b	Reimplement #2892 Include #2892 to fix the isHeating symbol in the extruder graphics	2016-02-28 23:20:30 +01:00
AnHardt	615bec2329	Activate warning about possible reduced accuracy by default Renamed `WARN_REDUCED_ACCURACY` to `DISABLE_REDUCED_ACCURACY_WARNING` Changed the condition for blinking from ``` #if ENABLED(WARN_REDUCED_ACCURACY) ``` to ``` #if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) ```	2016-02-28 23:20:21 +01:00
AnHardt	1c889cd303	Refresh previous_cmd_ms during run_z_probe() Refresh previous_cmd_ms during run_z_probe() to prevent: stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME and extrudes for expired EXTRUDER_RUNOUT_SECONDS (https://github.com/MarlinFirmware/MarlinDev/issues/238)	2016-02-28 23:20:12 +01:00
AnHardt	4b02f33e69	Distribute config-changes to the other configurations	2016-02-28 23:20:04 +01:00
AnHardt	be24fdacea	The same changes to the axis-letters now for the char-displays Exactly the same - copy/paste.	2016-02-28 23:19:54 +01:00
AnHardt	5b0f659355	Changes for graphics displays Replaced displaying "---" instead of the value of a coordinate when unhomed or with reduced precision with blinking the coordinate-prefix-character ('X','Y','Z'). For "unhomed" a '?' is shown every second second - until that axis is homed. The value displayed is, as before the "---" where displayed, the relative to the reset position coordinate value. When the axis stepper was disabled, now we can display a hint on that, by showing a blinking ' ' instead of the axis letter, when WARN_REDUCED_ACCURACY is defined. I suppose the code itself is here the better documentation. A '+/-' character is in non of our charsets so i decided for a '?' for now to reduce the work. There is no additional space on the displays one could use to display the information, so replacing something is the only option. As the axis letters are totally redundant with their positions on the display they contain the least information. So my decision was to overwrite them.	2016-02-28 23:19:32 +01:00
AnHardt	32ae9f9ab7	Fix stepper shutdown during waiting for temperatures In the wait loops of M109 M190 idle() is called, what checks stepper_inactive_time against previous_cmd_ms. Because we can be several minutes inside the loop, resetting previous_cmd_ms only outside the loop caused stepper shutdowns. The name of previous_cmd_ms does not really reflect its use. It's set not only when a new command was received or executed but also in many of the movement routines. For that the little extension of using it during the wait will (hopefully) not hurt. # Conflicts: # Marlin/Configuration_adv.h	2016-02-28 16:58:50 +01:00
AnHardt	b6e69e71ce	Make stepper shutdown after inactivity dependent Make stepper shutdown after inactivity dependent on a new set of #defines. DISABLE_INACTIV_X DISABLE_INACTIV_Y DISABLE_INACTIV_Z DISABLE_INACTIV_E And make exemplaric Configuration. Names can be discussed. This makes the disabling of the steppers independent from the DISABLE_? settings witch shut down the steppers immediately.	2016-02-28 16:58:42 +01:00
AnHardt	051325ccd7	Introduce axis_homed Introduce additional variable axis_homed to replace axix_known_position when the coordinate display should indicate the axis is not homed. This is to distinguish between "not homed" and "inexact position possible because stepper was disabled". # Conflicts: # Marlin/ultralcd_implementation_hitachi_HD44780.h solved	2016-02-28 16:58:28 +01:00
AnHardt	e736779d7e	blink for char-lcds Implement and test blinking for char-lcds # Conflicts: # Marlin/ultralcd_implementation_hitachi_HD44780.h solved	2016-02-28 16:58:19 +01:00
Scott Lahteine	7253a1971d	Fix "M145" output in M503 report	2016-02-27 22:28:08 -08:00
Scott Lahteine	d118e3f985	Merge pull request #3044 from thinkyhead/rc_gcode_spaces Fix GCode handling of spaces between command letter and first digit	2016-02-27 22:21:28 -08:00
Scott Lahteine	100271e6ac	minor cleanup in gcode_T	2016-02-27 19:56:56 -08:00
Blue-Marlin	fd9e94e5a4	Fix crashes when the Z axis is moved via LCD Fix crashes when the Z axis is moved via LCD by calling `plan_buffer_line` only when there is enough room in the planner buffer, to avoid endless recursion. A brief description about what went wrong is in #1166	2016-02-28 00:59:47 +01:00
Scott Lahteine	8dccd5a7ea	Merge pull request #3018 from CONSULitAS/RCBugFix_K8200_backinsync K8200: sample config back in sync	2016-02-27 05:22:12 -08:00
Scott Lahteine	6a4f06d35d	Fix GCode handling of spaces between command letter and first digit	2016-02-26 18:42:59 -08:00
Marc Urben	68eae2b5a8	added kossel xl example configuration	2016-02-27 01:48:45 +01:00
Silvio Didonna	eb5817675d	Fix board type: RAMPS 1.4	2016-02-25 15:52:41 +01:00
AnHardt	cb88fdd242	Protect MarlinSerial against interrupts Protect MarlinSerial against interrupts by shielding the CRITICAL_SECTIONs Now with a test if RX_BUFFER_SIZE is in the required range. Code in peek() and read() is now optimized for readability and showing the similarity between the two. Maybe a bit overprotected in checkRx() and store_char(), but now some days without detected errors from this source.	2016-02-24 17:18:12 +01:00
AnHardt	dc0f41868e	Make rx tail/head atomic	2016-02-24 15:51:34 +01:00
CONSULitAS	ea8409ad5d	Fix: current_command_args contains command @thinkyhead Hi Scott, your code from a0f362c@thinkyhead is great, but you forgot to skip the command. Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`. see also https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f 6f8e3c2f17ecc770 lines 941, 2851 and so on Greetings and welcome back Jochen	2016-02-24 09:35:04 +01:00
Scott Lahteine	9a3408e58f	Merge pull request #3024 from thinkyhead/rc_remove_steps_mm_e Remove obsolete STEPS_MM_E setting	2016-02-23 23:37:09 -08:00
Scott Lahteine	1093c780c8	Remove obsolete STEPS_MM_E setting	2016-02-23 01:11:58 -08:00
CONSULitAS	a4fe6a45ae	K8200: sample config back in sync * Configuration.h: * updated header comment * new UUID feature used * sync to default config * typos fixed * changes better documented * reflect change in SDSUPPORT feature * Configuration_adv.h * updated header comment * thermal protection tuned to work with K8200 * homing tuned * sync to default config * typos fixed * changes better documented * reflect change in LCD features * use long filenames * use Watchdog * use Babystepping * use Auto Filament Change	2016-02-21 16:06:25 +01:00
Scott Lahteine	c2e5c6c12c	Nest Manual Bed Leveling options This formalizes the dependency of MANUAL_BED_LEVELING on MESH_BED_LEVELING	2016-02-20 20:35:10 -08:00
Scott Lahteine	042a6a0a37	Extend existing MESH_BED_LEVELING test	2016-02-20 20:35:10 -08:00
esenapaj	08b3147791	sanity check for MANUAL_BED_LEVELING	2016-02-20 20:35:10 -08:00
Scott Lahteine	9f8e6dce20	Merge pull request #2942 from esenapaj/esenapaj-patch-2 more suitable display format for delta printer	2016-02-18 17:59:35 -08:00
Scott Lahteine	e1beaf61eb	Merge pull request #2985 from AnHardt/adv-ok Repair N in ADVANCED_OK	2016-02-18 17:06:26 -08:00
esenapaj	34cde1b77c	Merge pull request #14 from MarlinFirmware/RCBugFix Rc bug fix	2016-02-19 09:19:23 +09:00
Scott Lahteine	f00ca3fd89	Fix layout descr. in configuration_store.cpp	2016-02-17 19:44:04 -08:00
Scott Lahteine	0c9db67273	Merge pull request #2983 from AnHardt/ok-echo Replace the "ok" in M280, M301, M304, M851 with output not including …	2016-02-17 19:09:41 -08:00
Scott Lahteine	fbfbc5e330	Enable USE_WATCHDOG by default	2016-02-17 17:14:57 -08:00
Scott Lahteine	d4e7c2d694	Merge pull request #2976 from thinkyhead/drop_configurator Drop the experimental Configurator	2016-02-17 17:08:08 -08:00
Scott Lahteine	9df0e0e0cc	Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed Sanity-check deprecated options replaced by SPI_SPEED	2016-02-17 17:07:58 -08:00
Scott Lahteine	3e2473e695	Merge pull request #2988 from thinkyhead/z2_more_extruders Use next open E connector for Y2/Z2	2016-02-17 17:07:07 -08:00
Scott Lahteine	8eaba020fb	Merge pull request #2973 from thinkyhead/fix_splash_url Remove references to marlinfirmware.org	2016-02-17 17:05:06 -08:00
Scott Lahteine	438a87eba8	Sanity check deprecated SDSLOW, SDEXTRASLOW	2016-02-17 14:54:10 -08:00
Scott Lahteine	b19b272172	Update configurations with SPI_SPEED - Include aligned comment about new SDSUPPORT behavior	2016-02-17 14:54:09 -08:00
Scott Lahteine	7f30f85602	Merge pull request #2987 from thinkyhead/gcode_allow_no_initial_space Fix handling of spaces in GCode	2016-02-17 14:51:19 -08:00
Scott Lahteine	b81d3b83cf	Drop the experimental Configurator Development moved to https://github.com/thinkyhead/MarlinConfigurator	2016-02-17 14:49:37 -08:00
Scott Lahteine	be691b51f1	Remove references to marlinfirmware.org The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.	2016-02-17 14:41:46 -08:00
Scott Lahteine	f3f58bd619	Merge pull request #2992 from thinkyhead/rc_rename_fpos_t Rename fpos_t to avoid libc conflict	2016-02-17 14:40:33 -08:00
Scott Lahteine	83ffc9eb4f	Show raw steps in M114 This is a proposed change. This section of M114 output is a debug extension according to RepRap wiki.	2016-02-15 15:59:24 -08:00
Scott Lahteine	373e8a1ad4	Fixes for COREXY and COREXZ coordinates	2016-02-15 15:59:24 -08:00
unknown	31656e68bc	Fix for homing X and Y before raising Z when Z_SAFE_HOMING is set.	2016-02-15 15:53:40 -06:00
unknown	8ea55323d8	Fix for not raising Z before homing X and Y	2016-02-15 14:52:04 -06:00
Scott Lahteine	b83e472bd3	Rename fpos_t to avoid libc conflict	2016-02-10 20:49:25 -08:00
Scott Lahteine	68457ee903	For Dual Y/Z use the next available extruder pins	2016-02-09 21:59:09 -08:00
Scott Lahteine	711e5db19a	Tweak comment in process_next_command	2016-02-09 18:16:35 -08:00
Scott Lahteine	400e9329be	Allow spaces after a code letter	2016-02-09 18:03:13 -08:00
Scott Lahteine	cdcb80f3c5	Allow no-space after initial command Addresses issue #2715	2016-02-09 18:00:35 -08:00
AnHardt	6f473f7fc6	Repair N in ADVANCED_OK Send the correct line number. If no N was in the command - non't send an N.	2016-02-09 19:23:26 +01:00
AnHardt	efbd705eda	Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" to avoid senting two "ok"s for a single g-code. Doing the same for M105 would break the input filters of the hosts. For M105 the other "ok" is omitted.	2016-02-09 13:36:03 +01:00
Scott Lahteine	8e66028d25	Apply the ABL rotation matrix to the extruder offset.	2016-02-08 14:22:18 -08:00
esenapaj	ab5aa3fc92	Merge pull request #5 from MarlinFirmware/RCBugFix Rc bug fix	2016-02-08 05:42:11 +09:00
esenapaj	27d918d836	Merge pull request #4 from MarlinFirmware/RCBugFix Rc bug fix	2016-02-08 05:35:32 +09:00
Scott Lahteine	159ff94afd	Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977	2016-02-07 08:02:11 -06:00
Ruwan J Egoda Gamage	1270fbfd38	Using SET_INPUT instead of pinMode	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	b58083b0fa	Getting rid of SDEXTRASLOW, SDSLOW variables.	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	1833049b8a	reusing millis()	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	1b7c443628	Adding SDULTRASLOW variable. Instead of changing SDEXTRASLOW variable to a slower speed, the new SDULTRASLOW is used for rigidbot panel.	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	6f9e9c0e4f	Cleaning up, getting rid of the fake encoder count variable.	2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage	becbfe1065	Fixing Rigidbot LCD Panel Support	2016-02-07 07:58:52 -06:00
esenapaj	4882a7eded	more suitable display format for delta printer	2016-01-29 18:38:25 +09:00
esenapaj	d7272e3f36	Merge pull request #3 from MarlinFirmware/RCBugFix Rc bug fix	2016-01-29 05:43:22 +09:00
Scott Lahteine	62bad1b60f	Merge pull request #2848 from japzi/RCBugFix Fixing Rigidbot LCD Panel Support	2016-01-26 17:30:12 -08:00
esenapaj	59d345a3dd	Update Configuration.h	2016-01-22 07:27:11 -06:00
esenapaj	b8f0c8a4c7	Update Configuration.h	2016-01-22 07:27:11 -06:00
esenapaj	df0d599c79	Update Configuration.h	2016-01-22 07:27:11 -06:00
esenapaj	a366697649	Update Configuration.h	2016-01-22 07:27:11 -06:00
Richard Wackerbarth	7c94c83765	Repair formula mangled by PR#1319 in Jan 2015	2016-01-15 10:06:27 -06:00
Naruto-kyun	2932602643	Update stepper.cpp Forgot Z2_MIN_PIN	2016-01-15 16:50:43 +01:00
Ruwan J Egoda Gamage	06555febdd	Using SET_INPUT instead of pinMode	2015-12-24 12:12:25 -05:00
esenapaj	8d2aa2368d	Update Configuration_adv.h	2015-12-23 08:16:36 +09:00
esenapaj	0de5fcad0a	Update Configuration_adv.h	2015-12-23 08:16:06 +09:00
esenapaj	1403b9acc0	Update Configuration_adv.h	2015-12-23 08:15:20 +09:00
esenapaj	5cf1c38ea1	Update Configuration_adv.h	2015-12-23 08:12:54 +09:00
esenapaj	04ab61bf40	Update Configuration_adv.h	2015-12-23 08:12:28 +09:00
esenapaj	39c62fbd6f	Update Configuration_adv.h	2015-12-23 08:12:04 +09:00
esenapaj	efcb769003	Update Configuration_adv.h	2015-12-23 08:09:57 +09:00
esenapaj	992fbb831d	Update Configuration_adv.h	2015-12-23 08:08:45 +09:00
esenapaj	5ee6fe6385	Update Configuration_adv.h	2015-12-23 08:07:12 +09:00
esenapaj	056daf00fc	Update Configuration_adv.h	2015-12-23 08:06:15 +09:00
esenapaj	71aafb79a0	Update Configuration_adv.h	2015-12-23 08:03:54 +09:00
Ruwan J Egoda Gamage	2c9e0415c7	Getting rid of SDEXTRASLOW, SDSLOW variables.	2015-12-13 23:23:01 -05:00
Ruwan J Egoda Gamage	a64bcd53e9	reusing millis()	2015-12-13 22:06:03 -05:00
Ruwan J Egoda Gamage	e6cc232184	Adding SDULTRASLOW variable. Instead of changing SDEXTRASLOW variable to a slower speed, the new SDULTRASLOW is used for rigidbot panel.	2015-12-13 15:47:10 -05:00
Ruwan J Egoda Gamage	83c4131ba3	Cleaning up, getting rid of the fake encoder count variable.	2015-12-13 15:28:40 -05:00
Ruwan J Egoda Gamage	5eeea2f611	Fixing Rigidbot LCD Panel Support	2015-12-13 15:28:40 -05:00
Richard Wackerbarth	f6950acb8e	Residual unused variable — Backport	2015-12-10 19:48:08 -06:00
Richard Wackerbarth	7a670e3911	Improve planner & stepper PR #263	2015-12-10 07:24:37 -06:00
Richard Wackerbarth	58658c9279	Call the probe pin a probe pin and not a min endstop	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	0fa3bac8ee	If unused, just don’t define it.	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	3b2973da6a	Prepare Ramps for user redefinition	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	1635613c25	Backport cosmetic	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	0b429461d5	Back port Cosmetic changes	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	0cebe85e65	Clean up spacing and duplicate entries • Removing trailing whitespace • Adjusting indention for better readability • Removing duplicated entries	2015-12-10 07:20:52 -06:00
Richard Wackerbarth	e7b40bbe98	Change link to U8glib source	2015-12-10 06:33:29 -06:00
Richard Wackerbarth	e2da2b4105	Back port language translation	2015-12-10 06:31:41 -06:00
Richard Wackerbarth	4f314afaf0	Allow Thermistor #12 to be used on hotends also //100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) Caveat Emptor —- I’m not sure that this really makes sense, but why keep someone from using it?	2015-12-10 06:31:31 -06:00
Scott Lahteine	60d5658da8	Revert nozzle_bed_fan_menu_items For some reason that I cannot determine, using a sub-function causes the Tune sub-menu to act strangely, yet replacing the function call with its code content works perfectly.	2015-12-09 20:33:52 -06:00
AnHardt	57da1b8497	Host parseble output for M109, M190 and M303 Make the output of M105 more similar to Repetier. Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()` Use `print_heaterstates()` in M019, M190 and M303	2015-12-07 15:37:53 -06:00
AnHardt	fcceb98191	Unglobalize no_wait_for_cooling	2015-12-07 15:34:26 -06:00
Wurstnase	78a347a01a	change nx, ny, nz and ne from float to long st_set_position takes long ```void st_set_position(const long& x, const long& y, const long& z, const long& e)```	2015-12-07 08:22:44 -06:00
Wurstnase	6d691aceee	change dx, dy, dz and de from float to long anything is long, we don't need float there	2015-12-07 08:22:24 -06:00
Richard Wackerbarth	6bfcb74c25	The probe stowing coordinates have changed	2015-12-05 19:31:59 -06:00
Wurstnase	0fbfb22506	Renaming delta speeds (PR2824) dx -> dsx dy -> dsy dz -> dsz de -> dse	2015-12-04 07:55:45 -06:00
AnHardt	8d1eeff021	Fix status LEDs update when reinitializing the display Fix status LEDs update when reinitializing the display By using the regular update function during init. Fixing #2683	2015-12-03 07:18:35 -06:00
Richard Wackerbarth	5a54204f72	Marlin 1.1.0 Release Candidate 3 - 01 December 2015	2015-12-01 07:24:45 -06:00
AnHardt	bb4efcf603	Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined by alternate definition for the callback macros	2015-12-01 07:21:52 -06:00
AnHardt	96d0d04b8f	Update LCD buttons less frequently Move slow_buttons_update into the LCD_UPDATE_INTERVAL block lcd_implementation_read_slow_buttons() will then be executed ~10 times a second.	2015-11-30 05:44:32 -06:00
Richard Wackerbarth	e293ea57f0	Unbalanced brackets in setPwmFrequency This is a back port of the correct in issue #248	2015-11-30 05:44:32 -06:00
AnHardt	c956b52c4a	Babystep Multiplier Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by @RicardoGA Restore the Babystep Multiplicator functionality and now it's available for X/Y/Z	2015-11-30 05:43:10 -06:00
Richard Wackerbarth	956418c674	Kc is also a multi-PID parameter	2015-11-23 06:08:01 -06:00
AnHardt	33addc52a1	Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747) For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA configurations. This PR comments the feature out, where it is commented in by default.	2015-11-13 07:33:33 -06:00
AnHardt	8da2e98985	Split RAMPS 1.3 an 1.4 (PR#2741) because of hardware differences on the SERVO0_PIN	2015-11-13 07:13:48 -06:00
AnHardt	be7167ed97	Change XY formatting on LCD (PR#2740) According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.	2015-11-13 06:46:11 -06:00
Luis Correia	e7099ea597	Fix Portuguese (Portugal) strings (PR#2700) Align strings with release	2015-11-12 00:08:42 -06:00
Scott Lahteine	754b13d8fe	Patch issue #2315	2015-11-12 00:03:22 -06:00
Scott Lahteine	dbd4c17096	Init Kp, Ki, Kd to 0	2015-11-12 00:03:22 -06:00
Scott Lahteine	644c376e84	Use binary OR with endstop bits	2015-11-12 00:03:22 -06:00
Scott Lahteine	54a39d8c1a	Use a ternary in qr_solve.cpp	2015-11-12 00:03:22 -06:00
Scott Lahteine	17c23bbaf3	Shorten gcode_M221 yet function the same	2015-11-12 00:03:22 -06:00
Scott Lahteine	c0e791dbe9	Only look for "N" line number as first parameter	2015-11-12 00:03:22 -06:00
Scott Lahteine	b4af4441c5	Clean up watchdog impl.	2015-11-12 00:03:22 -06:00
Scott Lahteine	8f16563bbd	Use "defined" with LCD_PIN_BL and LCD_PIN_RESET	2015-11-12 00:03:22 -06:00
Scott Lahteine	6fa7e24af3	Use "UNUSED" to squash compiler warnings	2015-11-12 00:03:22 -06:00
Scott Lahteine	d5b7c595ae	Use static locals in utf_mapper.h	2015-11-12 00:03:21 -06:00
Scott Lahteine	9bdab4f3a8	Clean up "else" and other spacing	2015-11-12 00:03:21 -06:00
Scott Lahteine	9b23490f01	Clean up spacing in configs	2015-11-12 00:03:21 -06:00
esenapaj	c6c37abd41	Update language_kana.h	2015-11-12 00:00:51 -06:00
esenapaj	c24045475a	Update language_kana_utf8.h	2015-11-12 00:00:32 -06:00
Richard Wackerbarth	25d636c9e0	Compiler issues (PR#2696)	2015-11-11 23:52:11 -06:00
AnHardt	47401ec97b	MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined. Originaly by @12dstring	2015-10-08 10:45:11 -05:00
Scott Lahteine	ba6a243197	DEBUG message has no parameter (PR#2671)	2015-10-03 22:03:03 -05:00
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting	2015-10-03 22:02:45 -05:00
Rafa Couto	b5fb7075b9	Galician (gl) language.	2015-09-30 14:46:01 -05:00
Richard Wackerbarth	7b4bdc0203	DUAL_X_CARRIAGE motor enabling As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.	2015-09-30 04:31:19 -05:00
Richard Wackerbarth	91b5156b3e	Marlin 1.1.0 Release Candidate 2 - 29 September 2015	2015-09-29 20:28:41 -05:00
Richard Wackerbarth	03f0edb57e	Fix high LCD status screen update frequency (PR#2655)	2015-09-28 11:07:33 -05:00
KiteLab	0ad25c6665	Hint for changed behaviour of SDSUPPORT	2015-09-28 11:07:33 -05:00
Richard Wackerbarth	e01f5e1ef7	Cleanup	2015-09-17 10:44:23 -05:00
Mike Cochrane	5e36b64635	SDEXTRASLOW for some SD card readers (PR#176) Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL	2015-09-14 07:58:08 -05:00
Scott Lahteine	5d65a36dee	Give lcd_sd_status an UNKNOWN state (PR#180)	2015-09-14 06:32:27 -05:00
fmalpartida	0f149ea0c6	LCD home button causes repeated homing (PR#175) Fix: increased debounce delay.	2015-09-14 06:31:49 -05:00
Scott Lahteine	b825567e0f	Drop www. from marlinfirmware.org (PR#175)	2015-09-14 06:28:53 -05:00
Scott Lahteine	db27e67580	Apply PID_ADD_EXTRUSION_RATE to extras	2015-09-12 07:53:20 -05:00
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	2015-09-12 07:53:20 -05:00
Scott Lahteine	cffb2d457e	Cleanup file formatting	2015-09-12 07:48:27 -05:00
Scott Lahteine	7ac7ddbf20	Show nozzles, heaters, and extruders numbered 1-4	2015-09-12 07:40:18 -05:00
Scott Lahteine	5bc480fee8	Fix Move E menu items	2015-09-12 07:33:49 -05:00
Scott Lahteine	fc882c34a3	Init lcd_sd_status as false to force lcd_update test Replaces #145 which is way out of date	2015-09-12 07:32:20 -05:00
Scott Lahteine	e27dd5c22d	Conditionalize functions that rely on SDSUPPORT	2015-09-12 07:30:09 -05:00
Scott Lahteine	fabf3ae4a0	Add final Z raise after Delta probe	2015-09-12 07:23:24 -05:00
Petr Zahradnik	8c768a76a2	Create language_cz.h Czech language translation.	2015-09-12 07:18:05 -05:00
Petr Zahradnik	5b9010965d	Update language.h Added comment for Czech language (associated with file language_cz.h).	2015-09-11 04:43:54 +02:00
Scott Lahteine	89fb778684	Fix up probe pin define and test	2015-09-10 10:54:03 -05:00
Scott Lahteine	558665cd90	Constrain Tune > Nozzle/Flow menu items	2015-09-10 08:47:11 -05:00
Scott Lahteine	9f462f0cf5	Hack to address stuttering caused by ISR not finishing in time (PR #138) When the ISR does not finish in time, the timer will wrap in the computation of the next interrupt time. This hack replaces the correct (past) time with a time not far in the future.	2015-09-10 08:26:17 -05:00
Scott Lahteine	8b3d63c423	Unify Delta XYZ homing rates As noted in #130 allen key probe stow rate is based on homing rates, but homing rates were left out of most delta configs. This unifies the XYZ homing rates and applies the unified rates to allen key movements.	2015-09-08 13:11:55 -05:00
Scott Lahteine	7c72b57313	Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128) As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.	2015-09-08 13:11:55 -05:00
Scott Lahteine	f690b82343	Remove extra MAX_FREQ_TIME define (PR#148)	2015-09-08 13:11:12 -05:00
Scott Lahteine	a4c78ae786	Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z	2015-09-07 09:41:06 -05:00
Scott Lahteine	a39fadf876	Update kossel-pro example config (again?)	2015-09-07 09:41:06 -05:00
Scott Lahteine	34e0a8d848	Move Y2 and Z2 pins defines to pins.h	2015-09-07 09:41:06 -05:00
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	2015-09-07 09:41:05 -05:00
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	2015-09-07 09:41:05 -05:00
Scott Lahteine	f7f6b5faae	Fix lcd_move_e compile error (PR#143) Fix a compile error introduced in #98	2015-09-07 09:36:05 -05:00
Scott Lahteine	2b30e8ac99	Conditionals for ULTIPANEL without SDSUPPORT	2015-09-06 02:04:49 -05:00
Scott Lahteine	7c7a4051fe	Disable SDSUPPORT by default As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`, `PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible to disable `SDSUPPORT` on these controllers and then disables it by default. Users of these controllers will now need to enable `SDSUPPORT` in their configurations as others currently do.	2015-09-06 02:04:49 -05:00
Eric Kuzmenko	b23d765991	Added Extrude From Multiple Extruders from LCD feature	2015-09-05 05:33:18 -05:00
Christian Lefrançois	8347a9d6e4	Fix HOMING_BUMP_DIVISOR for deltas configuration * Re-bump speed divisor should be the same for delta printer.	2015-09-03 09:26:28 -05:00
Scott Lahteine	703df2cb6c	Fix error message for probe region sanity check	2015-09-03 03:27:47 -05:00
Shane Francis	4c8330c15c	Trim Adjustments for Delta Configurations	2015-09-03 01:05:33 -05:00
Scott Lahteine	962120d1d2	Fix spacing in some conditional blocks	2015-08-27 20:59:09 -05:00
Richard Wackerbarth	20b4772155	Create DEBUG_LEVELING_FEATURE	2015-08-27 20:52:08 -05:00
Scott Lahteine	194f98ff95	Debug messages for homing and leveling	2015-08-27 20:52:08 -05:00
Richard Wackerbarth	6292d9e815	Rename ENABLE_AUTO_BED_LEVELING With the introduction of the #if ENABLED(…) reads better than	2015-08-27 20:52:08 -05:00
Richard Marko	91fd66ffba	add Lulzbot TAZ4 example configuration (PR#104)	2015-08-27 08:36:43 -05:00
Wurstnase	7a275773ee	remove colon in utf_mapper.h (PR#106)	2015-08-27 07:15:23 -05:00
Chris Bruner	6b4b6fa315	update for newest version of U8glib_Arduino	2015-08-26 19:52:59 -05:00
Christian Lefrançois	9897a9147c	Update ABL comments (PR#95) * Updates the auto bed leveling comments ONLY. * Renames "Z probe" word usage in //comments and #errors properly.	2015-08-26 05:51:38 -05:00
Christian Lefrançois	a7822e3ff7	Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91) * Fix a couple of renames omission and macro expansion errors.	2015-08-20 06:04:46 -05:00
Richard Wackerbarth	ad90e851b3	Use a small unsigned integer type	2015-08-16 06:56:47 -05:00
Richard Wackerbarth	29b456ae07	Suppress some compiler warnings	2015-08-16 06:56:47 -05:00
Scott Lahteine	23d742bf06	Don't free the stack array plane_equation_coefficients (PR#83)	2015-08-16 06:53:24 -05:00
Scott Lahteine	e3b1e08777	Patch G30 to use raise_z_for_servo (PR#73)	2015-08-15 21:47:04 -05:00
Scott Lahteine	a1eb90d5c0	Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET	2015-08-12 21:26:32 -05:00
Scott Lahteine	91122277f4	Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes	2015-08-12 21:26:25 -05:00
AnHardt	5707a2c3d5	indexindexIntoAB is only vald for !DELTA	2015-08-11 17:32:11 -05:00
AnHardt	d8860f9ad9	Alway end at the same point Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION] Regardles the evennes of auto_bed_leveling_grid_points.	2015-08-11 17:32:11 -05:00
AnHardt	4ca8f4a9a7	Always zigzag Use the shortest way between probing-points.	2015-08-11 17:32:11 -05:00
AnHardt	3d23424121	Add array indexIntoAB[xx][yy] and use it.	2015-08-11 17:32:11 -05:00
AnHardt	e2d69f66b2	Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.	2015-08-11 14:41:36 -05:00
AnHardt	6a6e863a47	Resolve #2581 by adding a missed ';' (PR#67)	2015-08-10 12:51:59 -05:00
RicardoGA	e09ff79635	Update pins_RAMPS_13.h (PR#64) Now all ramps configuration can enable Filament sensor not only EEB	2015-08-10 05:53:01 -05:00
Fourmi	e6aed7bb4e	Update thermistortables for Hisens Thermistor (PR#2588)	2015-08-09 18:11:14 -05:00
Richard Wackerbarth	9d8cc24abf	Continue from the line following the M999 (PR#60) If the printer is going to accept the M999, then it should continue from that line number.	2015-08-08 08:08:02 -05:00
wurstnase	f3ab1dba54	Z babystepping for coreXY (PR#47) only X and Y were not implemented	2015-08-04 20:10:09 -05:00
Richard Wackerbarth	35afea1c0e	Restore test PR#2572 Changed this because of faulty Boolean Logic NOT(A OR (NOT B) OR (NOT C)) != (NOT A) AND ((NOT B) OR C)) Besides, the compiler should be smart enough to optimize this without help from the programmer	2015-08-04 15:22:56 -05:00
Scott Lahteine	6af75f4b5d	Squish down deprecated tests in sanity check	2015-08-03 16:04:48 -05:00
Scott Lahteine	edeb58288e	Use PIN_EXISTS in sanity check	2015-08-03 16:04:48 -05:00
Scott Lahteine	c30b7693e0	Clean up RUMBA pins conditions	2015-08-03 16:04:48 -05:00
Scott Lahteine	46453905d6	Apply remaining ENABLED/DISABLED conditionals	2015-08-03 16:04:48 -05:00
Richard Wackerbarth	b227d8c128	Supply a VERSION in a short form for displays The long descriptor will still be available in M115	2015-08-03 08:21:09 -05:00
Richard Wackerbarth	cd7828a928	This will be the 1.1.0 Release rather than 1.0.3	2015-08-03 08:08:38 -05:00
Richard Wackerbarth	4e2f5618c1	Pick up Default_version when needed	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	329acc852e	Canonize Option flag USE_AUTOMATIC_VERSION	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	5a11d32a85	Move deprecation test to SanityCheck.h	2015-08-03 08:08:37 -05:00
Richard Wackerbarth	7bb7a52940	Bring config up-to-date	2015-08-03 07:35:33 -05:00
AnHardt	244ea2014a	Boot-screen for text-displays improvements Centred the logo for 16x4 and 20 x4. Moved version to the bottom line Code shrink to 704 bytes.	2015-08-03 07:13:00 -05:00
AnHardt	80f2a20842	Enable bootscreen in all Configurations	2015-08-03 07:13:00 -05:00
AnHardt	2684d061ed	Scroll too long strings on bootscreen	2015-08-03 07:13:00 -05:00
AnHardt	4f46df5dab	Make bootscreen configurable for the graphic displays Saves about 473 byte of progmem and 28 bytes of RAM.	2015-08-03 07:13:00 -05:00
AnHardt	09571b7753	Boot-screen for the character displays Uses about 488 byte of progmem and 32 byte of RAM. For that configurable.	2015-08-03 07:13:00 -05:00
Richard Wackerbarth	866efc14fe	Add Danish translations	2015-08-03 07:06:17 -05:00
Scott Lahteine	267f3479d7	Adjust spacing in pins_RAMPS_13.h	2015-08-02 23:26:58 -05:00
Scott Lahteine	56702e7bb9	Define servo pins just like other pins	2015-08-02 23:26:58 -05:00
Richard Wackerbarth	4b9d5cd352	Use lowercase names for serial instances	2015-08-02 23:01:39 -05:00
Scott Lahteine	1e2deff4fd	Rename BTENABLED to BLUETOOTH - For some reason it’s easy to forget what BT stands for, but it doesn’t need an abbreviation.	2015-08-02 22:56:50 -05:00
Scott Lahteine	68055a5959	Include RIGIDBOT_PANEL in Conditionals	2015-08-02 22:26:41 -05:00
George Djabarov	f8ed3a835d	Added comment with the RigidBot Big bed size	2015-08-02 22:13:37 -05:00
George Djabarov	7deae6b6be	Updated RigidBot example configuration - The default serial baud rate of 115200 - The regular RigitBot bed size 254mm/248mm/254mm - Single stock extruder - Stock termistors for extruder and hotbed - Stock Min X/Y/Z stops. Max stops not connected - Stock 32 teth tooleys (stock axis steps) - No auto bed leveling - No screen	2015-08-02 22:13:37 -05:00
Scott Lahteine	5418faa1f9	Add sanity checks for old names	2015-08-02 22:09:08 -05:00
Scott Lahteine	f03e063750	Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro.	2015-08-02 22:09:08 -05:00
Scott Lahteine	270c766de2	SDCARDDETECT -> SD_DETECT, added docs - `SD_DETECT_PIN` replaces `SDCARDDETECT` - `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED` - Revise the description of `SD_DETECT_INVERTED` - Add a note about the override of `SD_DETECT_INVERTED` in `Conditionals.h`	2015-08-02 21:59:41 -05:00
Scott Lahteine	496fc28dc3	Tweaks to pins comments	2015-08-02 21:34:13 -05:00
Scott Lahteine	8d3b74cc6e	Rename SDCARDDETECT to SDCARDDETECT_PIN - Rename the pin so it can be tested with `PIN_EXISTS` - Fix some incorrect tests for `SDCARDDETECT`	2015-08-02 21:34:13 -05:00
Scott Lahteine	0f5ada8cbd	Group the fail case in one negation (PR#2572)	2015-08-01 18:55:50 -05:00
AnHardt	7ddf1cda1d	Improve condition for SERVO_LEVELING (PR#2570)	2015-07-31 22:41:34 -05:00
Richard Wackerbarth	f32048b8f5	In for a penny, in for a pound	2015-07-31 17:13:53 -05:00
Scott Lahteine	e944f960de	Add a sanity check for old name "BEEPER"	2015-07-31 17:13:53 -05:00
Scott Lahteine	8ebf0b92be	Spacing adjustments in some pins files	2015-07-31 17:13:53 -05:00
Scott Lahteine	94a796c8cc	Rename BEEPER to BEEPER_PIN For consistency with other pins, allowing use of `PIN_EXISTS` macro.	2015-07-31 17:13:53 -05:00
Richard Wackerbarth	b217474eab	Compiler Complaints about concatenated tokens (PR#2566)	2015-07-31 17:08:44 -05:00
Scott Lahteine	2460f82d8b	Make proper distinction between BEEPER and HAS_BUZZER	2015-07-31 01:24:33 -05:00
Scott Lahteine	58cfcd4239	Overridable Options - Part 5 Apply `ENABLED` / `DISABLED` macros to files needing only a small number of changes.	2015-07-31 01:24:20 -05:00
Scott Lahteine	5e834352a9	Overridable Options - Part 11 (PR#2563) Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.	2015-07-31 01:07:04 -05:00
Scott Lahteine	bf6eb93c61	Overridable Options - Part 10 (PR#2562) Apply `ENABLED` / `DISABLED` macros to planner files.	2015-07-31 01:06:29 -05:00
Scott Lahteine	51e89a269c	Overridable Options - Part 9 (PR#2561) Apply `ENABLED` / `DISABLED` macros to temperature-related files.	2015-07-31 01:05:55 -05:00
Scott Lahteine	c35fb88094	Overridable Options - Part 8 (PR#2560) Apply `ENABLED` / `DISABLED` macros to stepper-related files.	2015-07-31 01:05:22 -05:00
Scott Lahteine	0d8989fc14	Overridable Options - Part 7 (PR#2559) Apply `ENABLED` / `DISABLED` macros to LCD-related files.	2015-07-31 01:04:37 -05:00
Scott Lahteine	b4abb0ae7f	Apply ENABLED / DISABLED to Marlin core files (PR#2558)	2015-07-31 01:03:58 -05:00
Scott Lahteine	c0d7ea3e7e	Overridable Options - Part 4 (PR#2556) Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.	2015-07-31 00:44:53 -05:00
Scott Lahteine	4b40964064	Overridable Options - Part 3 (PR#2555) Apply `ENABLED` / `DISABLED` macros to language-related files.	2015-07-31 00:19:13 -05:00
Scott Lahteine	32683b282b	Include configurator copies of configs	2015-07-31 00:03:36 -05:00
Scott Lahteine	37d1879386	Apply overridables to Configuration files	2015-07-31 00:03:36 -05:00
Scott Lahteine	9d151bb61b	servo_endstop_angles -> servo_endstop_angle	2015-07-30 23:35:57 -05:00
Scott Lahteine	9334479aeb	Minor cleanup of Conditionals.h	2015-07-30 23:35:57 -05:00
Scott Lahteine	1f63293624	servo_endstops -> servo_endstop_id	2015-07-30 23:35:57 -05:00
Scott Lahteine	edaaead7e0	Fix comment about SERVO_ENDSTOP_ANGLES	2015-07-30 23:35:57 -05:00
Scott Lahteine	ed4a6371ad	Add HAS_SERVO_ENDSTOPS to simplify conditonals	2015-07-30 23:35:57 -05:00
Scott Lahteine	70be61d416	Reset filament_size with a loop	2015-07-30 23:31:58 -05:00
Scott Lahteine	ae9274be05	Fix minor compiler warnings in for loops	2015-07-30 23:31:58 -05:00
Scott Lahteine	c7c8cfed6f	Complete M200 output with M503 - The contents of EEPROM include filament diameters even with Volumetric disabled. This change makes `M503` display the full volumetric settings so that playing back the output of `M503 S0` will fully restore them.	2015-07-30 23:31:58 -05:00
Scott Lahteine	4a58e447a1	Add array size to servo_endstop_angles (PR#2553)	2015-07-30 23:27:38 -05:00
Andrew Lenharth	a0ae9e30df	don't pass integer by reference, inefficient. (PR#2547)	2015-07-30 17:51:12 -05:00
AnHardt	d03f037a92	Get rid of malloc() and free() (PR#2549) Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free(). Saves about 656 bytes of progmem (library-code) and 22 bytes for static variables. Should use exactly the same amount of stack as it did before on the heap.	2015-07-30 17:50:31 -05:00
Scott Lahteine	3b2b2313ff	Combine if block related to SERVO_ENDSTOPS	2015-07-30 16:39:05 -05:00
Scott Lahteine	0af2a80e06	Make SERVO_ENDSTOP_ANGLES 2-dimensional	2015-07-30 16:38:56 -05:00
Richard Wackerbarth	525d0dc239	Configurator is out-of-date AGAIN (PR#2550)	2015-07-30 16:36:01 -05:00
Richard Marko	dd22cbbfb8	makefile: add buzzer.cpp (PR#2479)	2015-07-30 07:56:44 -05:00
Scott Lahteine	9f48798ffd	Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542)	2015-07-30 07:55:29 -05:00
Richard Wackerbarth	ae00fad75b	Rename as M100	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	a401d738df	There is an echo in here	2015-07-27 20:31:59 -05:00
Richard Wackerbarth	ed7d45e8f5	Memory watcher	2015-07-27 20:31:59 -05:00
AnHardt	d17f7ebc8a	Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535) instead of 1000. Else we get errors with times over 32 seconds.	2015-07-27 20:30:53 -05:00
Scott Lahteine	bea6739774	Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527)	2015-07-27 20:24:33 -05:00
Scott Lahteine	81bba7ed88	More sanity checking for extruder requirements (PR#2531)	2015-07-27 10:14:43 -05:00
AnHardt	87a97f3724	Fix conditions for display strings	2015-07-26 20:41:21 -05:00
AnHardt	aaccea0260	Shift some display only strings from language.h to lenguage_en.h and translate them to German.	2015-07-26 20:41:15 -05:00
Scott Lahteine	e4c01f1c7e	Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)	2015-07-26 20:40:27 -05:00
Scott Lahteine	ab6f1fdf8b	Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) As suggested in #2521 - Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is also required. - Add a note that endstops must be enabled for the feature to have any effect	2015-07-26 20:36:37 -05:00
Richard Marko	1183c10a2e	makefile: drop -q -q (much quiet) from avrdude flags Annoying when trying to figure out if uploading actually does something.	2015-07-26 20:31:31 -05:00
Richard Marko	0e064357f4	makefile: use /etc/avrdude/avrdude.conf on linux No need to look for arduino specific avrdude configuration as distributions ship their own avrdude.conf file that is compatible with arduino.	2015-07-26 20:31:31 -05:00
Scott Lahteine	bcb7d5a149	Improve sanitycheck for TEMP_SENSOR_1	2015-07-25 21:17:36 -05:00
Scott Lahteine	5b24f59401	Add sanity checks for temp sensors	2015-07-25 21:17:36 -05:00
AnHardt	fd0e81b0c7	Distinguish between BUZZER and SPEAKER (PR#2513) A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC. A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC. There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer. To make these board able to handle a speaker * replace the PWM based tone()-function again with a on-delay-off-delay loop. Hopefully the last time I touch the beeper code.	2015-07-24 22:10:04 -05:00
Scott Lahteine	e2957df05c	Shorthand for do_blocking_move_to	2015-07-24 22:07:41 -05:00
Scott Lahteine	819c5b9b50	Adjust comment on Z adjustment	2015-07-24 22:07:41 -05:00
Scott Lahteine	5a7356b6fc	Patch for G29 final Z position Include all the necessary pieces to get the final Z position after probing the bed, and add commentary about other possible changes.	2015-07-24 22:07:41 -05:00
AnHardt	088e09e052	Add forgotten Marlin_main.cpp	2015-07-24 22:04:49 -05:00
AnHardt	8b876241bd	Some more servo code tweaks Just set up the pin. Don't move to a random position. Simplify servo::move() * servo::move() does not need the pin parameter - The pin is set during servo_init() with attach(). * servo::move() does not need a return value. SERVO_LEVELING is the wrong condition to deactivate the servos. Remove some temporary (Servo *) variables. SanityCheck for the servo indexes.	2015-07-24 22:04:49 -05:00
Scott Lahteine	b116c096bd	Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) Updates to `set_homing_bump_feedrate`: - Move the string into Program Memory, reduce length by 31 bytes - Use an auto to get the divisor, adjust it on error - Set feedrate once, at the end	2015-07-24 22:00:25 -05:00
Scott Lahteine	f7e7862588	Better Sanguinololu & Graphical Controller (PR#2504) - Change suggested at https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553 266	2015-07-23 23:47:07 -05:00
Scott Lahteine	a1154d4a20	Enable Y and sanity-check CoreXZ (PR#2509)	2015-07-23 23:46:27 -05:00
Scott Lahteine	932f1c109e	Move servos to the top in pins_MEGACONTROLLER.h	2015-07-23 22:51:41 -05:00
Scott Lahteine	90f8ddfc1e	Apply MINIPANEL to other configs	2015-07-23 22:51:41 -05:00
AndySze	00dbf69b6d	add MINIPANEL defines	2015-07-23 22:51:40 -05:00
AndySze	8ac5e56934	fixed some format problems and cleaned code	2015-07-23 22:51:40 -05:00
AndySze	eef595aa64	add makerlab mega controller pin configs	2015-07-23 22:51:40 -05:00
AnHardt	4e14e152fa	Add Travis tests for CORXY and COREXZ	2015-07-23 19:52:48 -05:00
AnHardt	27d7d2ccab	Correct bracketing for COREXY-XZ	2015-07-23 19:52:21 -05:00
Scott Lahteine	469843427d	Reduce code in gcode_M81 (PR#2497)	2015-07-23 08:14:00 -05:00
Scott Lahteine	c66955aaf9	Mark unchanging arrays as const (PR#2494) The compiler may be able to optimize if it knows an array won’t be changing.	2015-07-22 21:37:37 -05:00
Scott Lahteine	278aa15301	Add COUNT macro and apply	2015-07-22 18:16:05 -05:00
Scott Lahteine	d85861d296	Move macros, add ENABLED/DISABLED, add includes	2015-07-22 18:16:05 -05:00
Scott Lahteine	17960fd2b0	Neaten up pins_MEGATRONICS.h (PR#2493)	2015-07-22 17:23:22 -05:00
Scott Lahteine	aac2b9aa9d	Reduce code in gcode_M84 (PR#2492) `gcode_M84` only needs to call `finishAndDisableSteppers`, which calls all the other functions.	2015-07-22 17:22:01 -05:00
Scott Lahteine	4971fa73f9	Add a sanitycheck error for old servo settings (PR#2491) - Documentation solution for #2476	2015-07-22 16:35:10 -05:00
Scott Lahteine	96ace72ddc	Servos attach/detach based only on servo config Assuming #2470 fixed up the main issue.	2015-07-22 16:34:26 -05:00
Richard Wackerbarth	b80a6a8d31	Correct Kossel Pro Configuration_adv (PR#2473)	2015-07-22 16:32:08 -05:00
Scott Lahteine	000a6fce46	Extract update_endstops from stepper ISR (PR#2474)	2015-07-19 18:33:18 -05:00
Scott Lahteine	e83eac312e	Move plan_arc next to prepare_move	2015-07-19 16:18:46 -05:00
Scott Lahteine	5c5936508d	G2/G3 Arcs for Delta - Update prepare_move_delta to take a target argument - Add Delta support to plan_arc	2015-07-19 16:18:46 -05:00
Scott Lahteine	9f53e2f0c9	Implement COREXZ in stepper.cpp and planner.cpp	2015-07-19 16:17:03 -05:00
Scott Lahteine	fa00e1d97f	Explode conditions common to corexy and cartesian	2015-07-19 16:17:03 -05:00
Scott Lahteine	c7dd5527b4	Add a C_AXIS and Z_HEAD to support COREXZ	2015-07-19 16:17:03 -05:00
Scott Lahteine	129f986ccf	Add COREXZ option to configurations	2015-07-19 16:17:03 -05:00
Scott Lahteine	69b0490b77	Show minimal preheat options in menus (PR#2471)	2015-07-19 16:14:59 -05:00
Scott Lahteine	eacfe132aa	Change the name of servos[] and servo_t	2015-07-19 11:35:48 -07:00
Scott Lahteine	3b23ccd366	Patch servos code for move - Have `Servo::attach` explicitly return -1 if it fails - Check for -1 in `Servo::move` because `servoIndex` might be 0 - Make `attach` / `detach` calls conditional on `SERVO_LEVELING` - Move `SERVO_LEVELING` define to `Conditionals.h`	2015-07-19 11:24:23 -07:00
Richard Wackerbarth	54ddc1d417	Simplify DRY RUN (PR#2358) Elsewhere DRYRUN turns off the heating elements and ignores constraints on them. Here, whenever motion is entered into the planner, if DRY RUN is set, we instantly act as if the E_AXIS is in the desired final position.	2015-07-19 10:15:53 -05:00
Scott Lahteine	944090c19c	Optimize lsDive logic	2015-07-19 10:13:40 -05:00
Scott Lahteine	417706e578	Include space for the terminating nul in lsDive	2015-07-19 10:13:39 -05:00
Scott Lahteine	f3c1a6b19c	Reduce lsDive stack usage to the minimum	2015-07-19 10:13:39 -05:00
Patrick Bogen	fba4e6241b	Specify print format for reporting invalid tmp_extruder (PR#2465)	2015-07-18 16:40:01 -05:00
AnHardt	d15d869267	Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464) to make clear - it's not a question but an order.	2015-07-18 10:27:21 -05:00
Scott Lahteine	f209b755a5	Move the Z probe as far as needed to trigger the switch (PR#2461)	2015-07-16 20:02:44 -05:00
Scott Lahteine	0f1df62389	Fixup comments in code_seen	2015-07-16 16:40:52 -05:00
Scott Lahteine	2945eb6650	Call code_seen only once per parameter	2015-07-16 16:40:52 -05:00
Scott Lahteine	b742af2e2a	Move Y_STOP_PIN for Printrboard with SD (PR#2420)	2015-07-16 16:39:55 -05:00
Scott Lahteine	baa9199973	Define extern delta only for delta	2015-07-16 16:36:30 -05:00
Scott Lahteine	77e80ef367	Require extruders for thermal code	2015-07-16 16:36:30 -05:00
Scott Lahteine	3bde4f4855	Require temp sensor for bed thermal protection	2015-07-16 16:36:30 -05:00
Scott Lahteine	82a3ed2f9a	Cleanup and dev notes in Marlin.h	2015-07-16 16:36:30 -05:00
Scott Lahteine	db23b9b184	Minor tweak to M204 code (PR#2457)	2015-07-16 16:35:13 -05:00
Scott Lahteine	81d42406b7	Move braces in homeaxis to prevent a hanging else (PR#2451)	2015-07-16 10:25:54 -05:00
Scott Lahteine	552a327df8	Fix lsDive filename stack overrun (PR#2449)	2015-07-16 10:23:56 -05:00
AnHardt	a6628f12cc	Eliminate the further use of the pin-parameter	2015-07-15 20:50:58 -05:00
AnHardt	8504992e9f	Remove the additional pin variable in Servo.cpp as sugested by @c-born inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240	2015-07-15 20:50:58 -05:00
AnHardt	ed6598adf5	Corrected Bed Height vs. Bed Topology for verbosity > 3 and cleaned out some tabs. Everything else is a rebased PR#2017 as proposed by @CptanPanic	2015-07-15 19:51:40 -05:00
brian	62302ceb9e	Add calculation of difference between auto-correct bed level plane, and measured topo map.	2015-07-15 19:51:40 -05:00
Scott Lahteine	de25a48dec	Remove PID examples from preconfigured configs	2015-07-15 19:13:53 -05:00
Scott Lahteine	7456710a1f	Update configs formatting	2015-07-15 19:13:47 -05:00
Scott Lahteine	391386dd94	Update configs for new servo deactivation	2015-07-15 19:13:40 -05:00
AnHardt	5243d8b523	Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default	2015-07-15 17:39:43 -05:00
AnHardt	49609f6c14	Activate the new servo.move() function by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp and removing the old configuration in the ABL part of Configuration.h	2015-07-15 17:39:43 -05:00
AnHardt	40b6edcad7	Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY. But it will work on all servo moves, not only the probe servo moves.	2015-07-15 17:39:43 -05:00
AnHardt	2ddb2a2be9	Add Servo::move() to servo.cpp move(pin, angel) - Sequence of attach(pin), write(angel), if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches. As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour, the usual sequence to handle a servo movement is: attach(pin) write(angel) delay(until the servo finished the move) detache() Here a function to handle the complete sequence.	2015-07-15 17:39:43 -05:00
mkile	8a01e5fb7a	Update Russian translation (PR#2443) Slightly updated translation.	2015-07-15 10:35:36 -05:00
Richard Wackerbarth	e83575537a	Compiler defines USBCON for USB devices (PR#2433)	2015-07-15 10:32:11 -05:00
ayberkozgur	7268d46508	Always calculate extruder temperature PID d term (PR#2432)	2015-07-13 13:22:26 -05:00
Scott Lahteine	87a872e103	Use st_get_position_mm where possible (PR#2411)	2015-07-12 22:15:54 -05:00
Scott Lahteine	2e0da8abdc	Allow N to take a negative argument (PR@2402)	2015-07-12 22:14:25 -05:00
Scott Lahteine	447dbd6fa5	Add STEPPER_RESET_PIN support	2015-07-11 16:04:11 -05:00
Scott Lahteine	a0351bdb73	Remove STEPPER_RESET_FIX option	2015-07-11 16:04:11 -05:00
Scott Lahteine	6b1b8cb2b3	Also nullify spaces before the checksum asterisk (PR#2409)	2015-07-10 09:03:07 -05:00
Scott Lahteine	8e61314323	Use RIGIDBOT_PANEL for consistency with online docs	2015-07-09 11:36:46 -05:00
Scott Lahteine	4b204da3c1	Cleanup of pins_RAMPS_13.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	536f86e896	RigidBot CONTROLLERFAN_PIN in Configuration_adv.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	f068e46661	RigidBoard include for pins.h	2015-07-09 11:36:46 -05:00
Scott Lahteine	9ebcae496d	RIGIDBOARD / RIGIDPANEL	2015-07-09 11:36:46 -05:00
Scott Lahteine	c3c605c658	Move note about LiquidTWI2 to Configuration.h (PR#2406)	2015-07-09 05:33:17 -05:00
Scott Lahteine	4e9d658141	Prevent a hanging SERIAL_ECHO_START in M111	2015-07-07 06:59:10 -05:00
Scott Lahteine	bc0fdbe88e	Use SERIAL_EOL in SERIAL_PROTOCOLLN macros	2015-07-07 06:59:10 -05:00
Scott Lahteine	d78ebbc0e9	Remove unused MSG_OK_B and MSG_OK_T	2015-07-07 06:59:10 -05:00
Scott Lahteine	6b494c1535	Use disable_all_heaters in M111	2015-07-07 06:59:10 -05:00
Scott Lahteine	15190d40df	Add extra EOL after M111	2015-07-07 06:59:10 -05:00
AnHardt	0e1cf78f5c	Remove code for testing if probing range is too small (PR#2390) becaue it is over-restrictive and superseeded by the now working tests if the probe-recktangle can be reached. See iss#2366	2015-07-07 06:58:01 -05:00
AnHardt	d421f5250d	Correct the sign of zprobe_zoffset for G29 (PR#@391) Sign flipped with #2167. See also comments https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355 and following.	2015-07-07 06:55:33 -05:00
Scott Lahteine	52fcc743ab	Replace "target" with "destination" in M600 (PR#2374) - Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being used as the index into the `destination[AxisEnum]` array.	2015-07-04 05:55:25 -05:00
Scott Lahteine	a5033c3652	Enable LCD_PIN_RESET if it exists (PR#2375)	2015-07-04 05:53:22 -05:00
AnHardt	23c8c5348f	Z-height fix V2b (PR#2351) here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are replaced with `zprobe_zoffset`.	2015-07-02 20:30:40 -05:00
Todd Swindoll	a111fbbd0a	z-probe offset fix (PR#2361) verified via 1.0.2 tag that compiles by multiple people, credit for the fix goes to paulusjacobus for the initial find and sniffle for the correction so M851 works.	2015-07-02 20:28:07 -05:00
Scott Lahteine	42465ee444	Cleanup of comments & spacing	2015-06-28 08:20:28 -05:00
Scott Lahteine	9682ed455e	Fix comment on M83, add comment to prepare_move	2015-06-28 08:20:19 -05:00
Scott Lahteine	bb44fe17cf	Fix typo in buzzer.h endif (PR#2337)	2015-06-27 06:10:19 -05:00
AnHardt	36746143a1	Correct output of M48 (PR#2336) n_samples is an uint8_t . Got printouts like: 50 of 2 ...	2015-06-27 06:08:40 -05:00
Scott Lahteine	f6ca5a8da8	Allow "M110 N123" without a checksum	2015-06-26 18:13:54 -05:00
Scott Lahteine	aaad65ff5d	Include a comment documenting M110	2015-06-26 18:13:54 -05:00
Scott Lahteine	862c72b030	Put the mandatory test of gcode_N first	2015-06-26 18:13:54 -05:00
Scott Lahteine	30976f9773	Allow M110 to handle a second N argument	2015-06-26 18:13:53 -05:00
Scott Lahteine	d135b15bb8	Init all endstop bits to 0 (PR#2332)	2015-06-26 07:10:22 -05:00
Scott Lahteine	5ccb1c9e7d	Use millis for M600 audio feedback interval	2015-06-25 20:45:03 -05:00
Scott Lahteine	fb16a83b8a	Cleanup M600 documentation comments	2015-06-25 20:45:03 -05:00
Scott Lahteine	97ec224d72	Replace target with destination in M600	2015-06-25 20:45:03 -05:00
Scott Lahteine	4ce9ddbb74	Check the temperature before filament change	2015-06-25 20:45:03 -05:00
Jaime van Kessel	b8b5762e55	Update Ultimaker URL	2015-06-25 09:12:44 -05:00
Jaime van Kessel	d5bfbf5a59	Added correct dutch translation for calibrate.	2015-06-25 09:12:44 -05:00
Scott Lahteine	149c474e55	Updated Russian language (PR#2325) Gleaned from https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664 8976eafd1ae220ae	2015-06-22 23:07:19 -04:00
AnHardt	722829b058	Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) at least the lcd independent part from Marlin_main.cpp.	2015-06-22 22:31:48 -04:00
AnHardt	c461975140	Rename and repair MELZI_1284 (PR#2301) to MELZI_MAKR3D. Fix for #2288 As the normal MELZI also can have a 1284.	2015-06-22 22:30:07 -04:00
schlotzz	1e9cf905c7	Enable ZigZag AutoBedLeveling on Deltas (PR#2273) ZigZag has been disabled by fault due to do_topography_map	2015-06-15 20:26:25 -05:00
Scott Lahteine	ec93383ec8	Add SanityCheck for bed probe position settings (PR#2282)	2015-06-15 20:22:44 -05:00
Scott Lahteine	dc40a5f6e0	Patch up more outdated config lines	2015-06-15 20:20:32 -05:00
Scott Lahteine	98c9111a7d	Update delta configs with latest settings	2015-06-15 20:20:32 -05:00
Scott Lahteine	e6baf8afd9	Fix up allen key settings in delta configs	2015-06-15 20:20:31 -05:00
Scott Lahteine	3b293fc5d1	Move Delta settings lower in delta files	2015-06-15 20:20:31 -05:00
Scott Lahteine	df21857583	Move extruder offset settings next to extruders setting	2015-06-15 20:20:31 -05:00
Scott Lahteine	2dd1859247	Cleanup spaces and comments in configs and conditionals	2015-06-15 20:20:31 -05:00
Scott Lahteine	a274769f4f	Clean up spacing and comments Also clean up some trailing spaces in a few other sources	2015-06-15 20:20:31 -05:00
Scott Lahteine	d3bce05d54	Fix up spacing for filament sensor values	2015-06-15 20:20:31 -05:00
Scott Lahteine	b4b10a57fe	Fix configurator section directives and values lists	2015-06-15 20:20:31 -05:00
Scott Lahteine	bba14dcbe6	Move Z Safe Homing point to the middle of the movement range	2015-06-15 20:20:31 -05:00
Scott Lahteine	318318b02f	Add pins_RAMPS_13_EFB.h to reduce redundancy	2015-06-15 20:17:09 -05:00
Scott Lahteine	346c8b339b	Remove a test from pins_RAMPS_13.h - Add 3 new lines to `pins.h` to remove 2 redundant tests in `pins_RAMPS_13.h`	2015-06-15 20:15:38 -05:00
AnHardt	b93cddfcc9	Add lost MKS_BASE to pins.h (PR#2297)	2015-06-15 10:23:46 -05:00
AnHardt	6ab7b560af	Rework buzzing (PR#2296) by: Moving HAS_LCD_BUZZ macro to Coditionals.h Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd. Removing the ULTRALCD condition. Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd. All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER. To do: Check the conditions for the BEEPER-pin in all pin-files.	2015-06-15 06:13:26 -05:00
Scott Lahteine	29122db2fa	Fix ULTRA_LCD spelling in HAS_LCD_BUZZ	2015-06-15 06:12:34 -05:00
Scott Lahteine	1d94d098bf	Formatting tweaks as part of fixing issue 1497	2015-06-14 19:57:27 -05:00
Scott Lahteine	e602c28ad9	Set auto fan pins to OUTPUT during init Fixes the problem of these pins being left in INPUT state, as described in #1497	2015-06-14 19:57:27 -05:00
Scott Lahteine	90f858aa85	Use translated strings for axis movement (PR#2280) Suggest we use the translated strings here. They use (except for German) the phrasing “Move X” instead of just the axis letter, but they should fit the available space. The “Extruder” string would be the same, except it will be translated.	2015-06-14 08:16:00 -05:00
Scott Lahteine	e2a4a83586	Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )	2015-06-12 22:39:35 -05:00
Scott Lahteine	6b1b3adaf0	Consistent punctuation in SanityCheck errors (PR#2283)	2015-06-12 09:31:02 -05:00
MagoKimbra	eb81982fcd	Fix error next command in autotune (PR#2274) Now send only temperature for T or B, but not send OK. Host interprets the line to show the right temperature, but not in response to M105 then stop and send commands until it ends the autotune.	2015-06-12 07:10:38 -05:00
AnHardt	55b23c896a	Optimise out_of_range_error() (PR#2265) by avoiding the strncopy()	2015-06-12 02:20:40 -05:00
filipmu	b0860adab6	Fix volumetric multiplier display for filament sensor (PR#2264) The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.	2015-06-12 02:19:27 -05:00
AnHardt	45642b7fe8	Respect DISABLE_AXIS settings (PR#2216) when DEFAULT_STEPPER_DEACTIVE_TIME is over instead of simply turn off all.	2015-06-11 11:35:05 -05:00
wurstnase	c85a486445	make the dual z-endstop optional (PR#2277) it's disabled by default	2015-06-10 15:45:59 -05:00
Scott Lahteine	962b107341	Prevent current_command_args from bypassing nul (PR#2270)	2015-06-09 16:07:10 -05:00
Richard Wackerbarth	06ae832276	Deprecate Support for Arduino IDE < 1.0.5 Note that newer versions of the IDE can still be made to support compilation for the older boards.	2015-06-08 17:15:28 -05:00
Scott Lahteine	ff6081be3a	Parse N[0-9]+[ ]* differently (PR #2263 ) More general solution to skip N[0-9]+[ ]* in the parser as in #2218	2015-06-08 17:06:49 -05:00
Scott Lahteine	aad121864e	Include "Z" in M851 report	2015-06-08 05:09:27 -05:00
Scott Lahteine	96a3fba8ac	Reverse the sign of zprobe_zoffset - When editing on the LCD, minus now means below the nozzle - Stores the opposite sign in EEPROM, so bumped to “V20”	2015-06-08 05:09:27 -05:00
fmalpartida	f92907183c	Updated SAV MkI pin header.	2015-06-08 05:07:11 -05:00
Richard Wackerbarth	58941e543e	ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed #defining something just to define something else doesn’t make sense If you want SDCARDDETECTINVERTED, just define it yourself. If the previous code was intended to define, undefined and then again define the term, that code is improper.	2015-06-06 21:44:59 -05:00
CONSULitAS	788eb6e647	planner.cpp: remove tab planner.cpp: single evil and hidden tab removed ♻️ 😏	2015-06-06 20:13:56 -05:00
CONSULitAS	3a5963c0e7	Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue … * all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping issue * for K8200: uncommented with tested (and working) values	2015-06-06 20:13:56 -05:00
CONSULitAS	e55e65d1e4	planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue … @CONSULitAS planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with macro and linear scaling) @thinkyhead thanks for idea on linear scaling	2015-06-06 20:13:56 -05:00
paclema	8d295547be	* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.	2015-06-06 19:45:45 -05:00
atfield90	6d0e91328d	Renamed Board_megatronics_1 to Board_minitronics	2015-06-06 18:59:04 -05:00
atfield90	c4a2e5ac23	Renamed Pins_megatronics_1 to Pins_minitronics	2015-06-06 18:59:04 -05:00
atfield90	2076906aaa	Renamed Pins_megatronics_1 to Pins_minitronics	2015-06-06 18:59:04 -05:00
tonokip	10733a2bb0	added minirambo pin definitions. V2	2015-06-06 18:37:58 -05:00
Richard Wackerbarth	303d47228e	Define Probe Path in new format	2015-06-06 17:48:27 -05:00
Richard Wackerbarth	ad09d6a60f	3 Step Allen Key Probe	2015-06-06 17:48:27 -05:00
Richard Wackerbarth	8359cdf01d	Check compatibility for Teensy-based processor The instruction say to set a #define in fastio.h However, that value is not included before this test.	2015-06-06 17:24:34 -05:00
Ed Boston	08968c29bb	Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples	2015-06-06 16:40:32 -05:00
Ed Boston	fed18bcc20	Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER Hardware changes has removed the need for this option.	2015-06-06 16:40:32 -05:00
Ed Boston	b94a0e1501	Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED The new define allows the sd card detect to be inverted or not from Configuration.h	2015-06-06 16:40:31 -05:00
Ed Boston	bc205c76a3	SDCARDDETECTINVERTED problems Fixed an error where SDCARDDETECTINVERTED was being defined/undefined improperly	2015-06-06 16:40:31 -05:00
AnHardt	e400fce271	Merge pull request #2221 from MagoKimbra/Dryrun Insert Debug DRYRUN Repetier Host compatible	2015-06-03 12:30:48 +02:00
AnHardt	163a9ff58e	Merge pull request #2230 from AnHardt/psm Fix thermal protection state machine target temp. V2	2015-06-03 09:46:53 +02:00
AnHardt	c3fe6e61ae	Merge pull request #2229 from AnHardt/position-out-of-range Fix out_of_range_error()	2015-06-03 09:46:22 +02:00
MagoKimbra	4db8d2def4	Moved MSG_DEBUG in language.h	2015-06-03 08:18:27 +02:00
AnHardt	b7e9ba7591	Back to 1.0.3 dev - for now	2015-06-03 00:47:11 +02:00
AnHardt	d1f4471000	Merge pull request #2146 from Wackerbarth/Versioning Versioning	2015-06-02 18:31:21 +02:00
AnHardt	b1404a0743	fix thermal protection state machine target temp. V2 If the target temperature is changed then it would always stay in the reset state. Thanks to @tonokip. Replaces #2119	2015-06-02 12:26:21 +02:00
AnHardt	17b0ec84ed	Fix out_of_range_error() For sprintf_P() the first parameter has to be a `char` not `const char`.	2015-06-02 11:50:32 +02:00
AnHardt	35af5ef23e	Merge pull request #2225 from Wurstnase/naming consistency name for multiplier	2015-06-02 10:18:22 +02:00
wurstnase	e7e964432b	consistency name for multiplier replace extruder_multiply with extruder_multiplier like feedrate_multiplier or volumetric_multiplier	2015-06-01 22:33:22 +02:00
AnHardt	d4c6fc5d0a	Merge pull request #2223 from AnHardt/dualz-semicolon Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.	2015-06-01 20:15:55 +02:00
AnHardt	0d9d21d15f	Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.	2015-06-01 19:51:43 +02:00
MagoKimbra	76306f9073	Insert Debug DRYRUN Repetier Host compatible	2015-06-01 18:34:45 +02:00
MagoKimbra	881146bc22	Fix problem Width Cura	2015-06-01 17:25:32 +02:00
fmalpartida	11e3f3375d	Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing Updated LCD wiki location.	2015-05-31 21:20:26 +02:00
Alexey Shvetsov	a8670b66a7	Update ru translation Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2015-05-31 20:09:10 +03:00
fmalpartida	93da52d011	Added support for OLED SSD1306 I2C based LCDs.	2015-05-31 18:53:29 +02:00
Wurstnase	9c09967803	Merge pull request #2149 from Wurstnase/enstop_bits faster compare	2015-05-31 16:02:55 +03:00
wurstnase	0f3f7d6835	clean up double endstops	2015-05-31 14:06:13 +02:00
AnHardt	9d2a980bcf	Merge pull request #2170 from thinkyhead/beep_M600_elsewise Slight size reduction by adding idle()	2015-05-30 12:42:32 +02:00
AnHardt	2728dc0606	Merge pull request #2194 from thinkyhead/reduce_strings Redo "invalid extruder" to save 304 bytes	2015-05-30 11:05:08 +02:00
Scott Lahteine	be5236e839	Reduce setTargetedHotend by removing the switch	2015-05-29 18:03:58 -07:00
Scott Lahteine	06f401e7e5	Redo "invalid extruder" to save 264 bytes - Use `setTargetedHotend` in `M200`, as with other commands that use `T` for the extruder - Synthesize the "invalid extruder" message, obviating several long strings	2015-05-28 22:25:28 -07:00
Scott Lahteine	1a882bcc2e	Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands Ignore unknown commands if they start with G, M, or T	2015-05-28 22:03:48 -07:00
Scott Lahteine	a672872717	Merge pull request #2187 from AnHardt/MAX6675M105 Print active extruder with M105 for MAX6675	2015-05-28 18:12:48 -07:00
Scott Lahteine	9beed830eb	Drop commented code_is_good lines	2015-05-28 17:53:47 -07:00
Scott Lahteine	068d4a1eb2	Ignore unknown commands if they start with G, M, or T	2015-05-28 17:44:09 -07:00
Scott Lahteine	5824f613ff	Merge pull request #2185 from jothan/bed_integral Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…	2015-05-28 16:32:02 -07:00
Scott Lahteine	c5c9d12630	Merge pull request #2183 from AnHardt/displayinit Initialize the display earlier	2015-05-28 16:29:18 -07:00
Scott Lahteine	ef4becc413	Merge pull request #2188 from AnHardt/FtoN Replace MSG_F? with MSG_N?	2015-05-28 16:18:50 -07:00
Scott Lahteine	0564625757	Update M33 for new gcode parser	2015-05-28 14:17:39 -07:00
AnHardt	f18f689c01	Replace MSG_F? with MSG_N? To avoid double definitions. I prefer to read N for Number not for Nozzle.	2015-05-28 20:30:23 +02:00
AnHardt	af7e3f5076	Print active extruder with M105 for MAX6675 Was omitted when T0 is a MAX6675.	2015-05-28 19:03:16 +02:00
Jonathan Bastien-Filiatrault	d46d9d998e	Add maximum bed integral term in example configurations.	2015-05-28 12:51:37 -04:00
Jonathan Bastien-Filiatrault	e86f2342c0	Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX. My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed to reach its intended temperature. The head requires a low maximum power since I run on 24 volts and it has a somewhat low thermal mass.	2015-05-28 11:48:04 -04:00
AnHardt	f0523b5816	Initialize the display earlier to have it ready to display errors during (temperature)-setup.	2015-05-28 16:08:17 +02:00
Scott Lahteine	790c697c19	Fix DEGREES macro	2015-05-28 00:19:48 -07:00
Scott Lahteine	76b4678f99	Merge pull request #2171 from thinkyhead/gcode_110_is_good M110 is a known command	2015-05-26 21:17:58 -07:00
Scott Lahteine	03d5709b09	M110 is a known command - The command parser now displays “unknown command” in more cases. Known commands must be added to the `switch` inside `process_commands` to suppress the error.	2015-05-26 20:31:18 -07:00
Scott Lahteine	d76a01194d	Slight size reduction by adding idle()	2015-05-26 20:08:21 -07:00
Richard Wackerbarth	2deb5a8ac5	Temporary Hack REVERT THIS CHANGE In proper use, we want to force the vendor to update this file to reflect distribution parameters However, until most users have converted to automatic versioning, we “grant them a pass”	2015-05-25 15:54:08 -05:00
Richard Wackerbarth	b5743d6927	Use SOURCE_CODE_URL rather than FIRMWARE_URL	2015-05-25 15:53:34 -05:00
Richard Wackerbarth	5ea139fd79	Revised Versioning mechanism	2015-05-25 15:53:14 -05:00
AnHardt	da246f5cb1	Activate BED_MINTEMP error. And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error(). Includes #2156.	2015-05-25 13:23:19 +02:00
AnHardt	959da98d8e	Call kill() only once when triggered by a temperature error to avoid stack overflow when called from interrupt. Some clean up for calls of disable_all_heaters(). 'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().	2015-05-25 12:44:03 +02:00
Scott Lahteine	68f6f149d0	Reduce code size with out_of_range_error function - Affects code size when automatic bed leveling is enabled	2015-05-24 20:18:02 -07:00
wurstnase	94120740d8	faster compare !(~(ab)&0x3) and ab == 0x3 are equal	2015-05-23 07:55:15 +02:00
Scott Lahteine	c9141e604a	Merge pull request #2145 from thinkyhead/gcode_folding Indentation in process_commands	2015-05-22 18:47:37 -07:00
Scott Lahteine	b55f8718c3	Indent G90/G91, G92	2015-05-22 17:34:08 -07:00
Scott Lahteine	b0d520b109	Indent G30, G31/G32	2015-05-22 17:33:17 -07:00
Scott Lahteine	ffe27a6225	Indent G29	2015-05-22 17:32:46 -07:00
Scott Lahteine	86083badc2	Indent G4, G10/G11, G28	2015-05-22 17:32:27 -07:00
Scott Lahteine	47d7a9cb5e	Indent G2/G3	2015-05-22 17:31:38 -07:00
Scott Lahteine	350f239d84	Indent G0/G1	2015-05-22 17:31:24 -07:00
Scott Lahteine	672b0c1fd3	Cleanup pins in RAMPS_13_EFB boards	2015-05-22 16:20:54 -07:00
Scott Lahteine	15a2351675	No need for +1 on initial seen_pointer	2015-05-22 15:31:30 -07:00
Scott Lahteine	550dd87b2a	Set seen_pointer before calling code_value	2015-05-22 15:11:48 -07:00
Scott Lahteine	38cc0b93c6	Merge pull request #1874 from AnHardt/Bulgarian Introduction of Bulgarian - language_bg.h	2015-05-22 13:59:50 -07:00
Scott Lahteine	04a1622172	Merge pull request #2127 from Wackerbarth/Kossel_Pro Kossel Pro	2015-05-21 18:43:26 -07:00
Scott Lahteine	81c2ca3e10	Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb Witbox and Hephestos are RAMPS EFB	2015-05-21 18:39:02 -07:00
Scott Lahteine	f919a2fed1	Merge pull request #2134 from AnHardt/preheat-all Shift call of start_watching_heater() into setTargetHotend()	2015-05-21 18:36:28 -07:00
Scott Lahteine	063881b5bd	Fix a couple of doubled semicolons	2015-05-21 18:15:29 -07:00
AnHardt	94dff5b36a	Merge pull request #2137 from thinkyhead/tweak_swh Move millis call in start_watching_heater	2015-05-22 02:02:07 +02:00
Scott Lahteine	70d2f48d4e	Merge pull request #2136 from thinkyhead/M303_suppress_error Suppress the line mismatch error after M303	2015-05-21 16:46:30 -07:00
AnHardt	0c0ace2a04	Remove start_watching_heater() fom M104 and M109	2015-05-22 01:44:50 +02:00
Scott Lahteine	00716d0ca0	Small start_watching_heater adjustment	2015-05-21 16:44:49 -07:00
Scott Lahteine	834747deb7	Merge pull request #2135 from Wurstnase/new_endstop_bits new endstop bits	2015-05-21 16:35:54 -07:00
Scott Lahteine	bde9c70d42	Suppress the line mismatch error after M303	2015-05-21 16:27:22 -07:00
Scott Lahteine	50bd7493cc	Merge pull request #2108 from thinkyhead/m33_long_filename_host_support M33 LONG_FILENAME_HOST_SUPPORT	2015-05-21 16:22:47 -07:00
Scott Lahteine	4d11b29959	Merge pull request #2113 from thinkyhead/command_sanitizer Command sanitizer	2015-05-21 16:21:58 -07:00
wurstnase	ff98b8632b	new endstop bits	2015-05-21 23:16:43 +02:00
AnHardt	9b0fa9c309	Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS	2015-05-21 21:07:37 +02:00
AnHardt	bc0764894a	Shift call of start_watching_heater() into setTargetHotend() to warrant watching is set or reset. Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED. Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.	2015-05-21 20:36:11 +02:00
Richard Wackerbarth	b878bc5620	Introducing the Kossel Pro Build Configuration	2015-05-21 11:47:34 -05:00
Richard Wackerbarth	1d8f61ca8a	AT90USB is defined in pins.h	2015-05-21 11:46:54 -05:00
Richard Wackerbarth	735bf2d35f	Describe Custom M Code	2015-05-21 08:06:33 -05:00
Scott Lahteine	f39658c822	M120 and M121 are reversed	2015-05-21 00:17:44 -07:00
Scott Lahteine	6eb4f90ce7	Also synchronize configurator copies of configs	2015-05-20 21:34:00 -07:00
Scott Lahteine	9d1961ebe3	Witbox and Hephestos are just RAMPS_13_EFB	2015-05-20 21:33:23 -07:00
AnHardt	4422365a53	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error	2015-05-20 23:34:39 +02:00
AnHardt	4113762062	Merge pull request #2130 from AnHardt/kill2 Add a string parameter to kill()	2015-05-20 23:32:51 +02:00
AnHardt	89d2ee6f13	Make output on display dependant of ULTRA_LCD	2015-05-20 22:03:16 +02:00
AnHardt	120d4c7a8c	Merge remote-tracking branch 'origin/kill2' into _temp_error	2015-05-20 21:25:32 +02:00
AnHardt	cb6e82dc60	Change from kill() to kill(const char *) in temperature.cpp	2015-05-20 21:22:48 +02:00
AnHardt	9d13942278	Use new kill() with parameter.	2015-05-20 21:18:52 +02:00
AnHardt	6398c5e28d	Merge remote-tracking branch 'origin/kill2' into _temp_error	2015-05-20 21:08:19 +02:00
AnHardt	f4a93ed997	Add a string parameter to kill() Makes the output on the LCD adjustable.	2015-05-20 20:53:48 +02:00
AnHardt	2990c6c45f	Use new kill_() for _temp_error() instead of stop(). We really want to require a reset and no chance to set a new temperature.	2015-05-20 14:03:14 +02:00
AnHardt	9b8c6ed254	Merge pull request #2120 from chris-bo/dogm_config move dogm font selection to configuration_adv.h	2015-05-20 10:11:34 +02:00
AnHardt	06513565e9	Merge pull request #2105 from eboston/Development Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.	2015-05-20 09:56:21 +02:00
Ed Boston	082ed3beed	Propagate Configuration.h changes Updated all the example Configuration.h files for the new display type.	2015-05-19 14:04:57 -07:00
Ed Boston	152b681bb5	Added link to controller github Added the link to the github information about the ELB_FULL_GRAPHIC_CONTROLLER	2015-05-19 04:14:55 -07:00
AnHardt	995b84944b	Merge pull request #1982 from CONSULitAS/Development_Update_language.h language.h: update documentation / URL für K8200	2015-05-19 12:13:35 +02:00
Scott Lahteine	7bc5fd8193	Merge pull request #2123 from AnHardt/Duemilanove Remove Duemilanove	2015-05-18 20:36:05 -07:00
Scott Lahteine	94de1e0d93	Merge pull request #2116 from AnHardt/wording transpire -> expire	2015-05-18 20:34:46 -07:00
AnHardt	4d4fa3607b	Remove Duemilanove No way to fit Marlin into 32K.	2015-05-19 02:46:37 +02:00
AnHardt	e353d27430	Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian	2015-05-18 23:56:53 +02:00
Ed Boston	ca8d1756d5	Define fixes Fixed a couple defines that were not changed or commented out.	2015-05-18 14:23:31 -07:00
CONSULitAS	b96b28b7cc	language.h: update documentation for LANGUAGE_INCLUDE language.h: update documentation for LANGUAGE_INCLUDE @thinkyhead What do you think? I think there should be a warning like this.	2015-05-18 23:11:26 +02:00
Christian Bohn	258bcdefe0	move dogm font selection to configuration_adv.h	2015-05-18 22:54:53 +02:00
AnHardt	7750180c93	transpire -> expire Minor wording correction.	2015-05-18 21:48:10 +02:00
AnHardt	70163dafb9	Use _temp_error() for all errors thrown by different mechanisms Now ending in an endless loop. Tidy up the output format. We now get: ERRORTEXT ", system stopped! Heater_ID: " HEATERID Where ERRORTEXT can be: "Heating failed" "Thermal Runaway" "MAXTEMP triggered" "MINTEMP triggered" and soon "Thermal Jump" HEATERID can be 0, 1, 2 ,3 , "bed" This messages are always followed by the common: "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"	2015-05-18 20:26:25 +02:00
Scott Lahteine	a0f362c735	Simplify & optimize with current_command_args	2015-05-18 07:08:04 -07:00
Scott Lahteine	adc8fcb77f	More parser comments, optimize code_seen, save with goto	2015-05-18 07:08:04 -07:00
Scott Lahteine	c6d8dd19d9	use fetched value	2015-05-18 07:08:04 -07:00
Scott Lahteine	1116e13f5a	Further optimization of command parser	2015-05-18 07:08:03 -07:00
Scott Lahteine	3a4c3ab76e	Pre-sanitize the command before handling - Use a global pointer for the current sanitized command - Pre-sanitize the current command to bypass `N` and nullify `*`, removing the need for handlers to bypass, ignore, or nullify these parts, and reducing overhead for `code_seen`, etc. - Pre-skip leading whitespace. - Only look for G, M, T codes at the start of the command. - Verify that G, M, T codes are followed by command codes.	2015-05-18 07:06:51 -07:00
Ed Boston	a83bf18ee1	More functional seperation Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h. Added U8GLIB_LM6059_AF to define display specific actions. Added reminder to compile in u8glib	2015-05-18 05:37:46 -07:00
AnHardt	97ca1b3f4d	Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE to make it better findable.	2015-05-18 14:15:29 +02:00
Scott Lahteine	0f2c9bacfd	M33 LONG_FILENAME_HOST_SUPPORT	2015-05-17 17:36:32 -07:00
Scott Lahteine	3feaef6526	Have G92 set the nozzle position on Delta and SCARA	2015-05-17 17:08:05 -07:00
Ed Boston	047e688e93	Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER Rename of define to avoid confusion between the controller and the display which had similar names.	2015-05-17 15:23:17 -07:00
Ed Boston	1999ac415c	Formatting Changes Fixes for some code formatting changes and commenting out the ADAFRUIT_ST7565 define that was left defined.	2015-05-17 13:39:24 -07:00
Ed Boston	41f8cdb3a6	ADAFRUIT_ST7565 Added support for new display type	2015-05-17 12:47:41 -07:00
wurstnase	21ff773832	rework out_bits	2015-05-17 14:33:09 +02:00
Scott Lahteine	6c27eaf864	Merge pull request #2101 from thinkyhead/code_style Code style and a dangling "else"	2015-05-17 03:39:08 -07:00
Scott Lahteine	d580a0d186	Use "+=" in plane rotation	2015-05-17 01:51:14 -07:00
Scott Lahteine	2f3a410cb0	Fix a potential hanging "else" bug	2015-05-17 01:50:30 -07:00
Scott Lahteine	b83e3f0905	Combine "Bed X: " strings	2015-05-17 01:49:52 -07:00
Scott Lahteine	7dfb8becdb	Adjust some names and types in Marlin_main.cpp	2015-05-17 01:48:51 -07:00
Scott Lahteine	c966aa26ff	Comments in Marlin_main.cpp	2015-05-17 01:47:53 -07:00
Scott Lahteine	c54a2ea042	Adjust spacing in Marlin_main.cpp and stepper.*	2015-05-17 01:47:02 -07:00
Scott Lahteine	072625ccad	Update headings in Marlin_main.cpp and stepper.cpp	2015-05-17 01:44:53 -07:00
Scott Lahteine	16032f149f	Rename to codenum as a consistency	2015-05-16 23:17:35 -07:00
Scott Lahteine	273a4a253f	Merge pull request #2096 from thinkyhead/cherry_picking3 Hide M117 with no LCD	2015-05-16 21:10:28 -07:00
Scott Lahteine	64825a3d1e	Merge pull request #2095 from thinkyhead/cherry_picking2 Add gcode_line_error to reduce code size	2015-05-16 21:09:15 -07:00
Scott Lahteine	ca79282eaf	Hide M117 with no LCD	2015-05-16 20:59:04 -07:00
Scott Lahteine	ce218cafdb	Add gcode_line_error to reduce code size	2015-05-16 20:54:58 -07:00
Scott Lahteine	46d59784ad	Rename preocess_command to process_next_command	2015-05-16 20:47:40 -07:00
Scott Lahteine	513077c317	Minor change to fan kick	2015-05-16 19:42:28 -07:00
Scott Lahteine	76438195f0	NO_TIMEOUTS and ADVANCED_OK off by default	2015-05-16 02:47:20 -07:00
Scott Lahteine	d2563804c8	Add LF to file errors	2015-05-15 04:37:22 -07:00
Scott Lahteine	e114662cfa	Adjust SdBaseFile spacing	2015-05-15 03:23:49 -07:00
Scott Lahteine	98e91f5253	Allow lsDive to recurse with minimal stack usage	2015-05-15 03:19:07 -07:00
Scott Lahteine	19166a92e4	Merge pull request #2057 from Wurstnase/serial_wait add plan buffer remaining for 'P' and block buffer remaining 'B'	2015-05-14 04:57:08 -07:00
Scott Lahteine	95f5a68006	Merge pull request #2074 from thinkyhead/lcd_xyz_unknown Display unknown XYZ on the LCD as "---"	2015-05-14 04:56:38 -07:00
Scott Lahteine	e97fcafd0e	Merge pull request #2076 from thinkyhead/mendel_inverting Use MSG_OK in M105	2015-05-14 04:54:11 -07:00
Scott Lahteine	0f6cd3640b	Drop extraneous ok_to_send	2015-05-14 04:38:09 -07:00
Scott Lahteine	0ce355d9e7	Use MSG_OK in M105	2015-05-14 03:33:38 -07:00
Scott Lahteine	a366e57385	Merge pull request #2075 from thinkyhead/mendel_inverting Use Mendel default for INVERT_Y_DIR	2015-05-14 03:29:24 -07:00
Scott Lahteine	7b3acfbb6f	Merge pull request #2072 from thinkyhead/better_arc_code Consolidate arc code, remove motion_control.*	2015-05-14 00:27:22 -07:00
Scott Lahteine	78beef2d73	Use Mendel default for INVERT_Y_DIR	2015-05-14 00:25:47 -07:00
Scott Lahteine	1a4a09c26f	Display unknown XYZ on the LCD as "---" - Also show 2 digits past decimal for Z on DOGM	2015-05-13 22:45:58 -07:00
Scott Lahteine	68ce419147	Note on segment size	2015-05-13 19:11:36 -07:00
Scott Lahteine	8b92249f18	Bring arc_offset into auto scope	2015-05-13 19:00:46 -07:00
Scott Lahteine	80807b2d71	Consolidate arc code, remove motion_control.*	2015-05-13 18:52:41 -07:00
Scott Lahteine	f65833931d	Formatting tweaks	2015-05-13 02:02:19 -07:00
Scott Lahteine	fcfd99c1ae	Add comments to lcd_control_temperature_menu	2015-05-12 18:46:16 -07:00
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	2015-05-12 18:30:38 -07:00
Scott Lahteine	6697a8f375	Watch the heater a little longer	2015-05-12 18:22:47 -07:00
Scott Lahteine	5693a6e3c9	Fix heating error message	2015-05-12 18:17:13 -07:00
Scott Lahteine	747fd5801c	Merge pull request #2055 from thinkyhead/thermal_unified Combine thermal runaway and watch-period	2015-05-12 08:04:29 -07:00
Scott Lahteine	6e5572228d	Merge pull request #2064 from thinkyhead/wait_before_g28 Split up prepare_move by type	2015-05-12 07:53:11 -07:00
Scott Lahteine	27ad381e25	Allow fractional seconds in G4 and M0	2015-05-12 07:52:08 -07:00
Scott Lahteine	5146694452	Merge pull request #1884 from shaggythesheep/feature_new_board_ramps_cnc_controller Feature: Add RAMPS CNC Controller Board	2015-05-12 04:31:49 -07:00
Scott Lahteine	b2bd9aae7c	SCARA_SEGMENTS_PER_SECOND	2015-05-12 04:18:15 -07:00
Scott Lahteine	bd20bd5444	Merge pull request #2063 from chris-bo/autobed_sled improve sled handling	2015-05-12 03:29:21 -07:00
Scott Lahteine	9e95ceb3fc	Split up prepare_move by type - For better encapsulation add inlines for each prepare_move type - Move controllerFan vars inside the function as statics - Some formatting cleanup - Rename `ClearToSend` as `ok_to_send`	2015-05-12 02:08:20 -07:00
Scott Lahteine	9ba8cf5fe3	Merge pull request #2061 from thinkyhead/wait_before_g28 Always do st_synchronize() before G28	2015-05-12 02:05:30 -07:00
Scott Lahteine	873f7d6f2a	Check that configs are up-to-date	2015-05-12 01:33:51 -07:00
Christian Bohn	f48599f172	add pin definition to some motherboards	2015-05-12 10:02:23 +02:00
Scott Lahteine	b5200e184c	Remove extra setup_for_endstop_move	2015-05-12 01:01:53 -07:00
Scott Lahteine	8d814de558	Return void in prevent_dangerous_extrude	2015-05-12 00:55:00 -07:00
Scott Lahteine	367e2eb9f4	Global setup_for_endstop_move	2015-05-12 00:51:22 -07:00
Wurstnase	1d5677cc3b	add missing Z-bits	2015-05-12 09:36:19 +02:00
Wurstnase	df12e68e7d	add missing Z_PROBE-bit	2015-05-12 09:33:24 +02:00
Scott Lahteine	fa951f8a0b	Always do st_synchronize() before G28	2015-05-12 00:31:51 -07:00

... 13 14 15 16 17 ...

4012 Commits