Commit Graph

9707 Commits

Author SHA1 Message Date
Scott Lahteine
c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4 Fix fan kickstart 2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8 Tweak fan kickstart / speed code 2017-11-23 15:20:35 -06:00
Scott Lahteine
8602461da8
Merge pull request #8523 from GMagician/2.0-Tool-change-bad-behaviour-fix
[2.0.x] Tool change bad behaviour fix
2017-11-22 21:29:33 -06:00
GMagician
118ac61e59 [2.0.x] Tool change bad behaviour fix
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
[2.0.x] Add BIQU BQ111-A4 board
2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b Tweak char_mode init 2017-11-22 19:12:08 -06:00
Scott Lahteine
7533ccfa83
Merge pull request #8527 from thinkyhead/bf2_lcd_init_charset
[2.0.x] Fix up LCD init / charset
2017-11-22 19:06:29 -06:00
Scott Lahteine
9406c87a97 Fix up LCD init / charset 2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2 Add BIQU BQ111-A4 board 2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8 #ifndef => #if !PIN_EXISTS 2017-11-22 16:28:52 -06:00
Scott Lahteine
001ce7a2fd
Merge pull request #8521 from teemuatlut/Ultratronics
[2.0.x] Add support for Ultratronics Pro v1.0 and fix compiling for Due HAL
2017-11-22 16:18:59 -06:00
Scott Lahteine
c613a1ed38 Fix indentation, stepper.h dependency, etc. 2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771 Board definitions for Ultratronics Pro v1.0 2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
0c95262b9e
Merge pull request #8518 from Bob-the-Kuhn/temp-test-servo-2
[2.0.x] LP1768 - fix PWMs
2017-11-21 21:54:25 -06:00
Bob-the-Kuhn
9dad534f02 fixed 2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen
Followup to 13a3fb1acc
2017-11-21 18:23:39 -06:00
Scott Lahteine
8d0a45f5d4
Merge pull request #8512 from thinkyhead/bf2_debouncer
[2.0.x] General code clean/comment
2017-11-21 17:46:20 -06:00
Scott Lahteine
56c02b7f59 Shift register buttons question
Can LCD shift registers keep up with faster MCUs?
2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935 General cosmetic LCD 2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea Patch for !!TEST (was _BV once?) 2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62 Tweak M42 var 2017-11-21 16:12:08 -06:00
Scott Lahteine
cf2c5266ed
Merge pull request #8514 from MateuszKrawczuk/patch-1
Remove pin count check for MIGHTYBOARD_REVE
2017-11-21 15:44:59 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b Patch Max7219_LED_Set input args 2017-11-20 21:15:15 -06:00
Scott Lahteine
63e135732c
Merge pull request #8495 from GMagician/Tool-change-fix
[2.0.x] tool change bad behaviours
2017-11-20 20:36:46 -06:00
GMagician
a61127a421 [2.0.x] tool change bad behaviours
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Scott Lahteine
5cfdb76186
Merge pull request #8425 from Vynt-1/bugfix-2.0.x
Update pins_RuRAMPS
2017-11-20 16:18:16 -06:00
Vitaliy Sapyanov
e2724c68ab Update pins_RURAMPS4D.h
Add and bugfix pins
2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
[2.0.x] Updates to Anet A8 configurations
2017-11-20 15:12:30 -06:00
Scott Lahteine
586c1e4e73
Merge pull request #8484 from Bob-the-Kuhn/P1.02-P1.20
2.0.x LPC1768 - M42 compatibility with Repetier Host
2017-11-20 15:03:00 -06:00
Scott Lahteine
37a8d0b809
Merge pull request #8464 from tcm0116/2.0.x-pio_lib_deps
[2.0.x] Update PlatformIO lib_deps
2017-11-20 15:02:27 -06:00
Scott Lahteine
3066655727 Try port*100+pin, fix config dependency 2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80 Cosmetic tweaks 2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116 Fix P2_04, P2_05 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a M42 P1.20 fix 2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
5060195e8a
Merge pull request #8502 from fiveangle/bf_sync_tempurature_h
[2.0.x] Fix Temperature::setPwmFrequency() prototype to match source
2017-11-20 10:36:24 -06:00
Unknown
33912fa7e8 Update Temperature::setPwmFrequency prototype to match source
Introduced with #8446
2017-11-20 01:50:41 -08:00
Scott Lahteine
5a52cf6a71
Merge pull request #8499 from thinkyhead/bf2_workaround_sq
[2.0.x] Dependency adjustments (e.g., sq macro)
2017-11-19 16:08:09 -06:00
Scott Lahteine
b9327a4d16 Misc. general cleanup 2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f Fix sq/min/max macros after platform headers 2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd 32-bit unless… 2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe Remove enum.h include of MarlinConfig.h 2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d Dependency adjustments 2017-11-19 15:43:38 -06:00
Scott Lahteine
550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Scott Lahteine
81bc428b48 Don't compile custom u8g without DOGLCD 2017-11-19 13:58:38 -06:00
Scott Lahteine
3af7fc07e7
Merge pull request #8446 from Bob-the-Kuhn/LPC1768-PWM-rewrite
2.0.x FAST_PWM_FAN updates & make LPC1768 PWM use fewer CPU cycles
2017-11-18 07:07:30 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02 Display filwidth ratio in terms of E mm 2017-11-18 07:01:49 -06:00