bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
14,448 Commits 1 Branch 4 Tags 151 MiB
776d7761d9
Commit Graph

12324 Commits

Author SHA1 Message Date
Scott Lahteine
f2ed18d150 M303 followup 
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
 2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off (#17284) 
M303 D will now toggle activation of PID_DEBUG output.   This allows the debug capability to be built into the firmware, but turned on and off as needed.
 2020-03-24 19:38:09 -05:00
thinkyhead
0aeee64cca [cron] Bump distribution date (2020-03-25) 2020-03-25 00:03:18 +00:00
Roxy-3D
075a86b076
Update LCD timing on Formbot T-Rex 2+ machines 
The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient.   This change gives sufficient margin and the LCD Display is clean again.
 2020-03-24 17:15:03 -05:00
Roxy-3D
5d515c3a2f
Adjust for timing shift on Max7219 displays on AVR's 
Something has shifted.   The previous timing delays on the Max7219 debug displays is too tight without this correction.
I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared.
This corrects the issue and the display results are clean again.
 2020-03-24 17:08:31 -05:00
Scott Lahteine
68face848a Sanity check CONTROLLERFAN_SECS 2020-03-24 16:41:21 -05:00
Scott Lahteine
7455bb09b3
Add SoftwareSerialM for MKS Robin (#17207) 2020-03-24 16:14:30 -05:00
ellensp
41e944da00
Fix Emergency Parser on DUE (#17276) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-03-24 15:14:52 -05:00
MarkMan0
4113481c4e
Fix limits on acceleration editing (#17280) 2020-03-24 15:13:37 -05:00
mkpfalz
3260228009
Sanity-check CORE backlash axes (#17279) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2020-03-24 14:08:55 -05:00
rado79
bef9b9b07e
Delay after homing_backoff for CoreXY sensorless homing (#17273) 2020-03-23 20:32:36 -05:00
thinkyhead
edd6f6c5f2 [cron] Bump distribution date (2020-03-24) 2020-03-24 00:03:08 +00:00
Scott Lahteine
c87d73045b Fix extra M114 output line 
Fixes #17255
 2020-03-23 18:31:26 -05:00
George Fu
e3ebbe25e0
DGUS updates (#17260) 2020-03-23 18:00:22 -05:00
ellensp
cd4060a99c
Add USB serial support to SERIAL_PORT_2 on DUE (#17245) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2020-03-23 17:55:21 -05:00
Scott Lahteine
adb7a88428 Fix an unused var warning 2020-03-23 17:35:43 -05:00
Scott Lahteine
580d314fbe Skip impossible PWM sanity-checks 2020-03-23 17:35:43 -05:00
Scott Lahteine
fe154fa5de Fix CONTROLLER_FAN options compile 2020-03-23 17:35:43 -05:00
RasmusAaen
717c216851
Fix Copymaster Y_MAX pin (#17267) 2020-03-23 17:34:38 -05:00
thinkyhead
27c281eec3 [cron] Bump distribution date (2020-03-23) 2020-03-23 00:03:08 +00:00
Scott Lahteine
e7a9f17371 Tweak serial port descriptions 2020-03-21 23:38:44 -05:00
Scott Lahteine
2460a3dfbb Fix custom version file include 2020-03-21 23:34:19 -05:00
Scott Lahteine
2c325c2a7d Format some pins files 2020-03-21 21:18:46 -05:00
Scott Lahteine
e62b52da99 Use pin/port names for CHITU pins 2020-03-21 21:18:46 -05:00
Scott Lahteine
7988e31f5e whitespace 2020-03-21 21:16:15 -05:00
thinkyhead
29874b21b6 [cron] Bump distribution date (2020-03-22) 2020-03-22 00:03:15 +00:00
Scott Lahteine
04cea864bc
Split up STM32 pins files (#17212) 2020-03-20 23:45:00 -05:00
thinkyhead
3151856e98 [cron] Bump distribution date (2020-03-21) 2020-03-21 00:03:28 +00:00
thinkyhead
1738c13bc2 [cron] Bump distribution date (2020-03-20) 2020-03-20 00:03:07 +00:00
George Fu
71db5c1605
Fix FYSETC mini 12864 init / glitches (#17209) 2020-03-19 14:11:55 -05:00
thinkyhead
14daf1ee5e [cron] Bump distribution date (2020-03-19) 2020-03-19 00:03:40 +00:00
InsanityAutomation
84dec5da10
Add M42 M, improve M43 (#17173) 2020-03-18 16:12:51 -05:00
Scott Lahteine
de45ac41ad Implement CONTROLLER_FAN_USE_Z_ONLY 
Followup to #17149
 2020-03-18 14:36:40 -05:00
Erkan Colak
83eec683c9
New Controller Fan options and M710 gcode (#17149) 2020-03-18 13:41:12 -05:00
Scott Lahteine
abea6d5787 Tweak some lambdas 2020-03-18 10:33:15 -05:00
thinkyhead
252178fe62 [cron] Bump distribution date (2020-03-18) 2020-03-18 00:04:28 +00:00
RasmusAaen
c768605bde
Add Copymaster3D board (#17188) 2020-03-17 15:25:10 -05:00
Joe Prints
1f5824247f
More decimal places for babystep / Z probe offset (#17195) 2020-03-17 15:12:52 -05:00
Scott Lahteine
e8205af6fb Apply HAS_TMC_UART to pins files 2020-03-17 15:06:01 -05:00
Karl Andersson
e5dcab8fd2
ARMED support for TMC UART, probe temp (#17186) 2020-03-17 15:05:12 -05:00
ellensp
40922c7da7
Fix MKS SBASE 1.6 E1 heater pin (#17191) 2020-03-17 14:51:57 -05:00
thinkyhead
c1672220fd [cron] Bump distribution date (2020-03-17) 2020-03-17 00:04:33 +00:00
Scott Lahteine
f6e80d576d
Fix Z_MIN_PROBE_PIN on SKR 1.4 (#17187) 2020-03-16 17:49:33 -05:00
Scott Lahteine
b14c933171
LPC1768 EEPROM fallback to flash, add overrides (#17184) 2020-03-16 15:59:05 -05:00
Pascal de Bruijn
2fc0df1b39
Shorter LCD remaining time to prevent overlap (#17181) 2020-03-16 14:11:55 -05:00
thinkyhead
a662079cbc [cron] Bump distribution date (2020-03-16) 2020-03-16 00:04:45 +00:00
InsanityAutomation
775a4294fc
Configurable SLOWDOWN divisor (#17171) 2020-03-15 18:29:18 -05:00
Giuliano Zaro
3b987dfcec
Fix G34 Z lower, extra "BLTOUCH" debug line (#17175) 2020-03-15 18:23:24 -05:00
Scott Lahteine
c39873759f Fix Z after ABL Bilinear G29 with fade 
Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>
 2020-03-15 18:18:38 -05:00
Karl Andersson
85187290a7
Fix incorrect type on ubl_storage_slot (#17170) 2020-03-15 18:03:10 -05:00
Scott Lahteine
695e014075 Do later mounting of LCD-based SD 2020-03-14 19:24:35 -05:00
Scott Lahteine
090a90a036 Add EEPROM_BOOT_SILENT option 2020-03-14 19:24:35 -05:00
Scott Lahteine
095a1123c1 Add a global machine state 2020-03-14 19:24:35 -05:00
Scott Lahteine
41ffe9851d Fix LCD progress bar 
Fixes #17162
 2020-03-14 19:24:33 -05:00
thinkyhead
5c1970a229 [cron] Bump distribution date (2020-03-15) 2020-03-15 00:04:39 +00:00
Roxy-3D
9f85165101
Allow Tool Offset adjustments to have another digit of precision 
Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy.
This is not enough.    So the edit menu is switched to float52 to fix the issue.
 2020-03-14 18:12:29 -05:00
Scott Lahteine
8b2d55e345 Config version 020005 2020-03-13 23:22:46 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate (#17122) 2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros (#17159) 2020-03-13 23:18:16 -05:00
Scott Lahteine
a96be32fae Fix G26 corrupted position 2020-03-13 19:27:02 -05:00
thinkyhead
983a8cee45 [cron] Bump distribution date (2020-03-14) 2020-03-14 00:04:00 +00:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI (#17156) 2020-03-13 16:29:29 -05:00
Scott Lahteine
ad980a72f7 M0 Q preserve status 2020-03-13 14:42:42 -05:00
Scott Lahteine
7ec45f4382 Fix end of short (auto0.g) prints 2020-03-13 13:59:17 -05:00
Scott Lahteine
81b0548518 Fix Emergency Parser stuck state 2020-03-13 13:59:17 -05:00
Erkan Colak
aa32c47fb5
Shorten German BLTouch menu item names (#17151) 2020-03-13 12:34:03 -05:00
nick-diel
7070ea0b49
Add OnPidTuning event to Malyan LCD (#17143) 
All ExtUI LCDs need to keep up with ExtUI API changes.
 2020-03-12 19:48:33 -05:00
Scott Lahteine
59cb1466b7 Fix DUGS / DGUS typo 2020-03-12 19:30:18 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. (#17135) 2020-03-12 19:26:09 -05:00
thinkyhead
8c11ecaf73 [cron] Bump distribution date (2020-03-13) 2020-03-13 00:04:16 +00:00
thinkyhead
1f55986ed2 [cron] Bump distribution date (2020-03-12) 2020-03-12 00:04:11 +00:00
Scott Lahteine
318a16637b Fix M810 macro multiple use 
Fixes #17125
 2020-03-11 17:15:39 -05:00
BigTreeTech
8bad6e11e2
Fix STM32 _WRITE macro parameter (#17121) 2020-03-11 16:42:28 -05:00
Scott Lahteine
112245ee48
More explicit EEPROM types (#17127) 2020-03-11 16:41:18 -05:00
Scott Lahteine
924fa6045c Non-const REMEMBER needed for RESTORE 2020-03-11 15:25:16 -05:00
Daniel Kreuzhofer (@danieldotnet)
f29d6f802f
Revert Anet 1.x envs change (#17120) 2020-03-11 15:08:47 -05:00
George Fu
201c991cfa
Fix and update DGUS displays (#17072) 2020-03-11 03:40:30 -05:00
Jamie
23c5701178
Apply soft limits to joystick jogging (#17114) 2020-03-10 22:59:49 -05:00
Scott Lahteine
eb6c992bfb Announce SD file open 
Requested in #17110
 2020-03-10 22:54:19 -05:00
Gurmeet Athwal
bd44f041e8
M220 print FR percentage (#17101) 2020-03-10 20:13:59 -05:00
Daniel Kreuzhofer (@danieldotnet)
d78fbce827
Fix pio environments for Anet 1.x (#17109) 2020-03-10 20:04:44 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option (#17108) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-03-10 20:00:26 -05:00
Scott Lahteine
e7004550c4
Tweaks to finishSDPrinting (#17082) 2020-03-10 19:42:57 -05:00
thinkyhead
a31b7339cd [cron] Bump distribution date (2020-03-11) 2020-03-11 00:04:19 +00:00
Scott Lahteine
4e3a793f1e Fix broken enqueue_P 2020-03-10 18:28:49 -05:00
Scott Lahteine
9bff67bc74 Always look for PLR file, but more quickly 2020-03-10 17:07:14 -05:00
Vert
8bbcbc528c
Fix Z4 stepper indirection macros (#17107) 2020-03-10 15:57:10 -05:00
Scott Lahteine
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE (#17112) 2020-03-10 15:43:06 -05:00
thinkyhead
8799f8bfdb [cron] Bump distribution date (2020-03-10) 2020-03-10 00:04:08 +00:00
Scott Lahteine
972d1bf5b4 Ensure welcome message 2020-03-09 18:19:37 -05:00
Scott Lahteine
b5530775c9 Add debug logging for setup() 2020-03-09 17:46:49 -05:00
Scott Lahteine
13118dbd8d Additional numtostr functions 2020-03-09 17:46:49 -05:00
Scott Lahteine
0f39386d9b Make BOOTSCREEN_TIMEOUT generally available 2020-03-09 17:46:49 -05:00
Scott Lahteine
7674befa47 DOGM SPI delay is less common 2020-03-09 17:46:49 -05:00
Scott Lahteine
b579f5dc99 Move 'last_pause_state' closer to usage 2020-03-09 17:46:49 -05:00
thinkyhead
7f490c08da [cron] Bump distribution date (2020-03-09) 2020-03-09 00:04:03 +00:00
Scott Lahteine
982197b162
Fixes for Z4 axis, CS pins (#17097) 2020-03-08 16:31:37 -05:00
MangaValk
57f488738b
[ToolChanger] Lock the current tool at power-up (#17093) 2020-03-08 16:13:41 -05:00
Scott Lahteine
b21edce943 More general SD_DETECT_INVERTED override 2020-03-08 14:47:16 -05:00
Scott Lahteine
2a71e4f336 Revert that wack backoff 2020-03-07 23:10:56 -06:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros (#17054) 2020-03-07 22:20:41 -06:00
thinkyhead
5eb6fb1c2f [cron] Bump distribution date (2020-03-08) 2020-03-08 00:04:21 +00:00
Scott Lahteine
20f93404a7 Add / correct comments 2020-03-07 02:16:17 -06:00
Scott Lahteine
3db784f3c7 More pins debugging cleanup 2020-03-07 02:15:05 -06:00
Scott Lahteine
7b9eb233cb Emergency Parser dumb terminal compatibility 2020-03-07 02:15:05 -06:00
Scott Lahteine
c99773bae0 Max7219 suspend/resume 2020-03-07 01:18:26 -06:00
Scott Lahteine
8ff25a9566 Max7219 init last 2020-03-07 00:16:44 -06:00
Scott Lahteine
e9f451bffe Pins debug followup 2020-03-06 21:59:20 -06:00
thinkyhead
3b14158979 [cron] Bump distribution date (2020-03-07) 2020-03-07 00:04:33 +00:00
Scott Lahteine
913de024a9 Change PID dummy value to NAN 
Fixes #17078
 2020-03-06 13:55:27 -06:00
Scott Lahteine
1da49d0ac5 Non-blocking Max7219 test pattern 2020-03-06 13:19:38 -06:00
Scott Lahteine
ca4423ed2a Clean up pins debugging 2020-03-06 13:14:22 -06:00
Scott Lahteine
6cd99e6a77 Add pins to the pins debug list 2020-03-06 13:14:22 -06:00
Scott Lahteine
6d18f715e4 Fix M0/M1 message string 2020-03-06 13:14:22 -06:00
thinkyhead
459a0dae29 [cron] Bump distribution date (2020-03-06) 2020-03-06 00:04:16 +00:00
Scott Lahteine
3a72b0fd41
Update Chinese (TW) language (#17071) 2020-03-05 15:39:49 -06:00
Scott Lahteine
f0248c9ed9
Update Turkish language (#17070) 2020-03-05 15:37:02 -06:00
Scott Lahteine
c0801e900d Define Z_MIN_PROBE_PIN for Cohesion 3D Remix 2020-03-05 15:10:46 -06:00
Scott Lahteine
e3da86fb45 Fix SKR test for ONBOARD SD 2020-03-05 13:37:09 -06:00
Scott Lahteine
0578e9b16e Move SENSORLESS_PROBING to the probes section 
Fixes a bug with HAS_BED_PROBE not being set before use.
 2020-03-05 11:05:11 -06:00
thinkyhead
7e58739a1f [cron] Bump distribution date (2020-03-05) 2020-03-05 00:04:13 +00:00
Scott Lahteine
631addbbb4
SAMD51 SoftwareSerial (#17041) 2020-03-04 13:15:32 -06:00
Scott Lahteine
d4ac78535c
Allow Z_STOP_PIN override on SKR 1.4 (#17063) 2020-03-04 13:12:48 -06:00
Scott Lahteine
70863fbd55 Avoid name conflict with 'UART' 2020-03-04 12:50:58 -06:00
Scott Lahteine
7709261ea9 Move shared code to wait_for_bed_heating 2020-03-04 12:50:57 -06:00
thinkyhead
ab1863ac48 [cron] Bump distribution date (2020-03-04) 2020-03-04 00:04:06 +00:00
Scott Lahteine
72b63e9520 Fix TEMP_PROBE_PIN for SKR 1.4 
Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>
 2020-03-03 14:53:22 -06:00
George Fu
a698bfdc2a
Update FYSETC S6 pins/variants (#17056) 2020-03-03 14:30:09 -06:00
thisiskeithb
efc739a880
Use BED_MAXTEMP for PTC_MAX_BED_TEMP (#17061) 2020-03-03 14:22:28 -06:00
Scott Lahteine
83a60f15ff Fix EEPROM compile errors 2020-03-03 14:21:07 -06:00
Scott Lahteine
c083728e4c General code cleanup 2020-03-03 14:20:37 -06:00
Scott Lahteine
5e28b0f471 Minor EEPROM cleanup 2020-03-02 21:56:21 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option (#17032) 2020-03-02 21:52:53 -06:00
Scott Lahteine
5171e9da93 No more direct G28 calls 2020-03-02 21:01:58 -06:00
thinkyhead
12d05e4835 [cron] Bump distribution date (2020-03-03) 2020-03-03 00:04:10 +00:00
Scott Lahteine
07e22d1d65 Neopixel on LPC uses GPIO toggling 2020-03-02 17:20:01 -06:00
Scott Lahteine
646599d0d9 Finish M900 updates 2020-03-02 17:10:51 -06:00
Scott Lahteine
eb4d5120bf Keep name around for old configs 2020-03-02 16:23:17 -06:00
InsanityAutomation
552f7a91d0
Default on/off for Power Loss Recovery (#17051) 2020-03-02 16:07:53 -06:00
jufimu12
ad4a9eb73a
Fix G34 probing range/error bug (#17052) 2020-03-02 13:35:02 -06:00
Scott Lahteine
5aa528781f Fix ambiguous type 
Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>
 2020-03-02 13:23:07 -06:00
ellensp
af23c0480e
Don't define 'valptr' if unused (#17048) 2020-03-02 13:17:52 -06:00
ellensp
624ab24a5c
Suppress thisItemNr warning (#17049) 2020-03-02 13:14:08 -06:00
Jason Smith
66334820ca
Add TMC micro-steps sanity check (#17044) 
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
 2020-03-02 13:13:04 -06:00
Scott Lahteine
2c4e054e9a Fix fastio pin comment 2020-03-02 13:11:30 -06:00
Scott Lahteine
49c5f614c6 Minor motion style changes 2020-03-02 12:54:18 -06:00
Scott Lahteine
6b5347ee39 Improved M900 2020-03-02 12:05:00 -06:00
Scott Lahteine
b1a50d54e2 HAS_TRINAMIC => HAS_TRINAMIC_CONFIG 2020-03-02 12:04:36 -06:00
Scott Lahteine
736521a3f1 Balance mega tests, shorten some env names 2020-03-01 21:20:22 -06:00
Scott Lahteine
870a1f753a Fix undefined STATUS_CHAMBER_WIDTH 2020-03-01 21:19:50 -06:00
Jason Smith
cc822bf70f
Fix some 8 extruders issues, GTR build (#17043) 2020-03-01 21:19:02 -06:00
Jason Smith
5da6819277
Fix build issues with REPRAPWORLD_KEYPAD (#17038) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2020-03-01 19:54:22 -06:00
Scott Lahteine
362c9ae79a Clean up use of extra_xyjerk 2020-03-01 19:23:48 -06:00
thinkyhead
ac93df43cd [cron] Bump distribution date (2020-03-02) 2020-03-02 00:04:18 +00:00
ellensp
4b256a6fa8
Revert FYSETC Mini encoder change (#17040) 
Reverting #17010
 2020-03-01 17:59:00 -06:00
Jason Smith
4a3fcd0bf9
Fix three extruder with auto-fan build (#17035) 2020-03-01 17:37:16 -06:00
Scott Lahteine
edd1b76a9a Fix set_current_from_steppers_for_axis(E_AXIS) bug 2020-03-01 14:36:21 -06:00
Scott Lahteine
c4db8e49a7 XYZ_CHAR macro 2020-03-01 14:36:06 -06:00
Scott Lahteine
3473b21710 Move millis_t includes 2020-03-01 09:50:53 -06:00
Scott Lahteine
5e9a10dbae Use PSTR for common labels 2020-03-01 08:39:47 -06:00
thinkyhead
1d609d2bbd [cron] Bump distribution date (2020-03-01) 2020-03-01 00:04:02 +00:00
Vert
6c9ca1bec2
Clarify GT2560 common pins (#17021) 2020-02-29 04:35:10 -06:00
Scott Lahteine
730804289c
Catch more LPC1768 pin conflicts (#17019) 2020-02-29 04:14:40 -06:00
ManuelMcLure
39c34e4992
Use ADC resolution in AD595/8495 calculation (#17018) 
Fixes thermocouple reading on LP1768 (which uses 12-bit resolution).
 2020-02-28 23:28:17 -06:00
thinkyhead
b946530ef6 [cron] Bump distribution date (2020-02-29) 2020-02-29 00:03:54 +00:00
ellensp
9b145c7c73
Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 (#17010) 2020-02-28 12:26:54 -06:00
jufimu12
ac755fce82
Fix G34 "Decreasing accuracy" bug (#17013) 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
 2020-02-28 11:42:51 -06:00
Scott Lahteine
97e87d8262
Fix G76 reachable test (#17005) 2020-02-27 22:47:44 -06:00
Anders Sahlman
c669420134
Pass along sanity_check for (G33) probing (#17006) 2020-02-27 19:58:35 -06:00
thinkyhead
f8497b8171 [cron] Bump distribution date (2020-02-28) 2020-02-28 00:03:53 +00:00
Scott Lahteine
bfbd976c09 General G76 cleanup 2020-02-27 07:53:24 -06:00
Scott Lahteine
a75a25cd7c Replace direct call to G28(true) 2020-02-27 07:48:34 -06:00
Scott Lahteine
4f55723527 RUMBA has 3 E plugs 2020-02-27 07:48:02 -06:00
Scott Lahteine
77b82d300a Add idle_no_sleep 2020-02-27 06:45:33 -06:00
Scott Lahteine
e5d39063a2 Cleanups for PTC 2020-02-27 06:45:23 -06:00
Scott Lahteine
be62ab2d02 Move reachable test to Probe class 2020-02-27 06:16:33 -06:00
Roman Moravčík
9f8ee31144
Update Slovak language (#17002) 2020-02-27 03:38:46 -06:00
Makoto Schoppert
8164cac797
Fix planner.cpp compile (#16996) 2020-02-27 03:29:44 -06:00
thinkyhead
a80eda41bc [cron] Bump distribution date (2020-02-27) 2020-02-27 00:03:42 +00:00
Scott Lahteine
bafe8d920a Handle print completed LED event in M0 2020-02-26 12:02:54 -06:00
Scott Lahteine
633b716a3a Define DIAG pins for MKS SGen-L 2020-02-26 11:35:07 -06:00
Scott Lahteine
832951ec44
Case-insensitive g-code option (#16932) 2020-02-26 09:23:55 -06:00
Scott Lahteine
18b875dc9f Allow print recovery after parking 2020-02-26 08:16:46 -06:00
Scott Lahteine
6fd7f4fe1b Fix unified status bed temp display 2020-02-26 08:09:57 -06:00
Scott Lahteine
263a7beeb5 More extra travel jerk changes 
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
 2020-02-26 07:24:36 -06:00
Scott Lahteine
6913a4dfa8 Prevent park_point compile error 2020-02-26 07:10:35 -06:00
Scott Lahteine
025c50cc6d
Quick-homing sensorless back-off (#16872) 2020-02-26 06:50:13 -06:00
Scott Lahteine
02cce7d4b4 Add TRAVEL_EXTRA_XYJERK option 
See #16949

Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
 2020-02-26 06:43:07 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination (#16960) 2020-02-26 06:26:54 -06:00
Scott Lahteine
daa32013b1
Sanity check for LPC serial pin conflict (#16981) 2020-02-26 06:26:30 -06:00
Scott Lahteine
ec1b86d9cb Serial strings in macros 2020-02-26 05:38:33 -06:00
Scott Lahteine
cf597e2bb1 Allow weird probe values in G33 2020-02-26 05:33:57 -06:00
ellensp
e76f2ed4cb
Fix Trinamic pulse rate auto-assignment (#16966) 2020-02-26 04:34:21 -06:00
Scott Lahteine
b5c2190b38 String optimize followup 2020-02-26 04:32:40 -06:00
InsanityAutomation
28008aced0
Correct SKR expansion port pins (#16974) 2020-02-26 04:18:34 -06:00
ellensp
70af080813
Add LPC1768 Serial ports for pinsDebug (#16980) 2020-02-26 04:12:53 -06:00
Scott Lahteine
5ebba4b19f More serial strings 2020-02-26 04:11:12 -06:00
InsanityAutomation
cdcd45d651
Set LCD status for EEPROM errors (#16977) 2020-02-26 03:04:02 -06:00
Scott Lahteine
e78f607ef3 Use a STR_ prefix for non-translated strings 2020-02-26 03:02:03 -06:00
Scott Lahteine
6b9a17be16 Language: "failsafe" => "Defaults" 2020-02-26 02:03:47 -06:00