Scott Lahteine
2fde60da12
Changes for parity with 1.1.x
2017-12-06 21:50:54 -06:00
Scott Lahteine
6040d4080e
Cleanup stepper ISR. Allow cleaning for endstops.
2017-12-06 21:23:37 -06:00
Scott Lahteine
a4e1d83599
Fix M503 S parameter
2017-12-06 21:23:37 -06:00
Scott Lahteine
a3b098b4be
Whitespace clean
2017-12-06 14:02:44 -06:00
AnHardt
a993c5227d
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
2017-12-06 14:13:05 +01:00
Mateusz Krawczuk
5320906b0b
Update TEMP_BED_PIN in MIGHTYBOARD_REVE
...
Pin K7 number in fastio1280.h is 69, but it's also ADC15 pin.
To get correct value from ADC reading it should be set as 15.
2017-12-06 12:07:20 +01:00
Scott Lahteine
aeb5c623c1
Show "Level Bed Corners" with UBL too
...
Addressing #8676
2017-12-05 21:58:43 -06:00
Scott Lahteine
5fbb2f121e
Remove skew warning that could crash the planner
2017-12-05 20:27:20 -06:00
Richard Wackerbarth
c1184552ac
Change K1 to required option PID_K1
2017-12-05 19:59:59 -06:00
revilor
9e3fbcf35c
fix for #8669 ( #8679 )
...
* fix for #8669
* Update G28.cpp
2017-12-05 19:40:36 -06:00
Scott Lahteine
d8b444c144
Cleanup constextpr in planner.cpp
2017-12-05 18:55:57 -06:00
Scott Lahteine
a2372cfab5
Fix SKEW_CORRECTION without leveling
2017-12-05 18:48:34 -06:00
Scott Lahteine
4d3c3d0b73
Some ST7920 parity with 1.1.x
...
Possibly more should be brought over? Discussion at #8471
2017-12-05 02:22:36 -06:00
Scott Lahteine
3748c28924
Fix MBL G29 without LCD
...
Addressing https://github.com/MarlinFirmware/Marlin/pull/8575#discussion_r154536617
2017-12-05 01:57:45 -06:00
Scott Lahteine
772298257b
Creality pins spacing, MINIPANEL CS pin
2017-12-05 01:57:45 -06:00
Scott Lahteine
b27bc67271
Set initial endstops state
2017-12-05 01:10:31 -06:00
Scott Lahteine
b6ba32ce75
Support for RAMPS Plus (3DYMY)
2017-12-05 00:42:21 -06:00
Scott Lahteine
53694ebaa1
Folllwup to planner splitting
2017-12-04 18:55:23 -06:00
Scott Lahteine
37fff608b0
Merge pull request #8652 from fiveangle/bf2_usbcon_xonxoff
...
[2.0.x] SERIAL_XON_XOFF not supported on USB-native AVR devices
2017-12-04 16:46:18 -06:00
Scott Lahteine
4b612f590c
Split first move to planner for better chaining
2017-12-04 15:27:47 -06:00
Unknown
91b63f6d69
SERIAL_XON_XOFF not supported on USB-native AVR devices
...
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
2017-12-04 03:57:01 -08:00
Bob-the-Kuhn
57fac33a74
add explanations
...
1) add explanations as to why software SPIs are selected
2) remove unused flag/option
2017-12-03 20:32:22 -06:00
Bob-the-Kuhn
bb23286383
add README & modify spi_pins.h
...
still trying to fix file name
2017-12-03 20:00:56 -06:00
Scott Lahteine
dd8febca1a
Revert "Merge pull request #8611 from thinkyhead/bf2_planner_split_first"
...
This reverts commit 824980e70eaa7efb96bf
2017-12-03 17:50:19 -06:00
Bob-the-Kuhn
fb44f8e50f
Merge pull request #8616 from hg42/bugfix-2.0.x
...
[2.0.x][LPC1768][FIX] NUM_DIGITAL_PINS was negative, fixes PWM, arduino io functions, M42, M43, M226, probably also Servo, some LCD, soft spi, SoftwareSerial, ... may be others
2017-12-03 14:48:00 -06:00
Bob-the-Kuhn
4c5356f77a
Merge pull request #8622 from hg42/implement-LPC1768-GET_TIMER
...
[2.0.x][LPC1768][fix] Implement GET_TIMER and other GET_xxx, fixes PWM
2017-12-03 14:46:22 -06:00
Harald Gutsche
f5b4e1ef4f
as a workaround enable PWM for any pin, see PR #8622
2017-12-03 20:37:02 +01:00
Scott Lahteine
6e944a413c
Merge pull request #8607 from benlye/patch-1
...
[2.0.x] Fix M49 so that it does not hang the terminal console
2017-12-03 03:41:33 -06:00
Scott Lahteine
967522b95e
Merge pull request #8615 from dot-bob/Duplicator_6-2.0.x
...
[2.0.x] Example configurations for Wanhao Duplicator 6
2017-12-03 03:37:48 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp
2017-12-03 03:34:56 -06:00
Scott Lahteine
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff
...
[2.0.x] Report SERIAL_XON_XOFF in M115
2017-12-03 02:18:50 -06:00
Scott Lahteine
da9f140829
Merge pull request #8637 from thinkyhead/bf2_ubl_uses_LSL
...
[2.0.x] Use custom segment length for UBL Cartesian
2017-12-03 01:57:49 -06:00
Scott Lahteine
3a97de52ef
Split first move to planner for better chaining
...
Address #8573 , #8595
2017-12-03 01:27:14 -06:00
Scott Lahteine
24437de591
Use custom segment length for UBL Cartesian
2017-12-03 00:10:54 -06:00
Unknown
4c5ffd2349
[2.0.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
2017-12-02 21:08:06 -08:00
Scott Lahteine
aa7efb96bf
Bring configurations up to date
2017-12-02 21:50:51 -06:00
Scott Lahteine
63a91cd37a
Fix a homing comment
2017-12-02 21:02:37 -06:00
Scott Lahteine
8056120195
Rename inverse_mm_s => inverse_secs
2017-12-02 20:28:09 -06:00
Scott Lahteine
23557f8e77
Remove obsolete de_float
2017-12-02 20:23:10 -06:00
Jonathan Barchi
05f8e98c4a
Fix for issue #8629 - mismatch between number of stored and loaded dummy items on non-delta machines. ( #8631 )
2017-12-02 19:04:58 -06:00
Roxy-3D
48fb4e0932
Get Bi-Linear to work with G26
...
More corrections to make that happen...
2017-12-02 14:14:24 -06:00
Roxy-3D
0850b38b45
Get Bi-Linear working with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
2017-12-02 14:10:30 -06:00
Scott Lahteine
000b3b3117
Comment/cleanup of motion code
2017-12-02 01:09:55 -06:00
Scott Lahteine
046a1ad331
Merge pull request #8625 from tcm0116/2.0.x-G33
...
[2.0.x] Fix missing return values in G33_auto_tune
2017-12-02 00:51:19 -06:00
Thomas Moore
b35c3b5eb8
Fix missing return values in G33_auto_tune
2017-12-01 21:29:16 -06:00
Scott Lahteine
45c2388a58
Apply const to thermal_runaway_protection args
2017-12-01 19:42:44 -06:00
Scott Lahteine
0154e3480c
New feature: BED_SKEW_CORRECTION
2017-12-01 19:39:49 -06:00
Scott Lahteine
082ab8fcab
Add SKEW_CORRECTION to example configs
2017-12-01 19:22:27 -06:00
Unknown
d1f11e9c10
fix missing GET_TIMER (used by PWM for Ex_AUTO_FAN)
2017-12-01 22:28:55 +01:00
Harald Gutsche
dd1b503f64
fix NUM_DIGITAL_PINS being negative for more than 127 digital pins
2017-12-01 07:39:46 +01:00
dot-bob
bd45d0363d
Add default configurations for the Wanhao Duplicator 6.
2017-11-30 23:24:33 -07:00
Scott Lahteine
91fb6231b2
Fix EEPROM V45 header, layout
2017-11-30 22:45:17 -06:00
Roxy-3D
94e6b2976e
Restore correct G26 values for gMax 1.5+ printer
2017-11-30 18:12:17 -06:00
Scott Lahteine
dd3ce40826
Drop Planner::position_float, use int types
2017-11-30 17:43:31 -06:00
Scott Lahteine
ec6ca37ed3
Fix (un)apply_leveling fade bug
2017-11-30 17:25:44 -06:00
Scott Lahteine
a52fec6ac4
Planner class parity with 1.1.x
2017-11-30 15:55:08 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp
...
Fix M49 so that it does not hang the terminal console.
2017-11-30 20:17:44 +00:00
Scott Lahteine
e37dd64548
Apply LEDColor, language fixes
2017-11-29 23:58:12 -06:00
Scott Lahteine
8f90642eea
LED_CONTROL_MENU config changes
2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b
New Feature: LED_CONTROL_MENU
2017-11-29 21:02:55 -06:00
Scott Lahteine
23e45fa3c4
Apply const to some planner vars
2017-11-29 21:02:55 -06:00
Scott Lahteine
7c61bcb058
Apply SEGMENT_LEVELED_MOVES to example configs
2017-11-29 16:57:31 -06:00
Scott Lahteine
ef2531558c
Add an option to segment leveled moves
2017-11-29 16:57:30 -06:00
Scott Lahteine
285b868e9b
Tweak planner code style
2017-11-29 15:22:18 -06:00
Scott Lahteine
1f2acc33bc
Tweaks for check_axes_activity
2017-11-28 18:41:13 -06:00
Vitaliy Sapyanov
7f88334aa3
Done cleanup and removed duplicates in pins_RuRAMPS4D.h ( #8582 )
...
Remove duplicates, with followup fixes
2017-11-28 18:33:12 -06:00
Scott Lahteine
a8aa43ce2d
Merge pull request #8587 from AnHardt/2_Fix_WDTO_during_long_DELTA_moves
...
[2.0.x] Fix WDTO during long delta moves
2017-11-28 17:29:18 -06:00
Scott Lahteine
4793c34c53
Fix M290 boolval bug
...
Fix #8577
2017-11-28 17:21:33 -06:00
Scott Lahteine
16baa48699
Fix #8579
...
Fan speed code fell into a curly brace
2017-11-28 16:12:14 -06:00
AnHardt
02aa93a6ad
Fix Watchdog time out during long lasting DELTA moves
...
During long lasting moves of a delta machine neither the temperatures are maintained nor buttons checked nor ... .
The fix is to call 'manage_heater()' and 'idle()' every now and then in the loop where the move is segmented.
The code is abot the same as in G2_G3 wher we had the same problem with too large circles lasting too long.
Fixing #7510
2017-11-28 17:03:51 +01:00
Scott Lahteine
fadf9eb2d7
Simplify midpos calculation
2017-11-27 14:00:35 -06:00
Scott Lahteine
0880031e8e
Satisfy M702 dependencies
2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7
Followup to #8575
2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f
Make MBL work more like PROBE_MANUALLY
2017-11-27 02:12:29 -06:00
Scott Lahteine
94cb412e45
Allow override of probe bounds
2017-11-26 20:55:27 -06:00
Scott Lahteine
c8718aa111
Spacing, macros in LPC1768_PWM
2017-11-26 20:20:05 -06:00
Scott Lahteine
a67cf78c6b
Clean up whitespace, spacing
2017-11-26 20:18:52 -06:00
Scott Lahteine
f0dd4e3fa0
Bootscreen parity with 1.1.x
2017-11-26 20:07:17 -06:00
Scott Lahteine
b634bfe1b1
Tweak to readDir code
2017-11-26 18:25:00 -06:00
Scott Lahteine
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
2017-11-26 17:36:40 -06:00
Bob-the-Kuhn
7d8b66e207
Merge pull request #8570 from Bob-the-Kuhn/Sbase-PWM
...
[2.0.x] MKS Sbase - add servo pin definitions and add directly controlled PWM
2017-11-26 09:36:18 -06:00
Bob-the-Kuhn
59b32c25b5
MKS Sbase changes
2017-11-26 07:47:06 -06:00
Scott Lahteine
f90c075d1f
SD Menu patches
2017-11-26 01:14:18 -06:00
Scott Lahteine
9b64be0bc5
Fixes for leveling sub-menus
2017-11-26 00:05:36 -06:00
Scott Lahteine
25674da90c
Tweaks to do_blocking_move
2017-11-25 23:31:16 -06:00
Scott Lahteine
22b897e77d
Show M211 output with workspace offset
2017-11-25 20:48:20 -06:00
Scott Lahteine
d06e29846d
Loosen HAS_BED_PROBE definition
2017-11-25 20:11:21 -06:00
Roxy-3D
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960
Fix G26 error return
2017-11-25 19:53:14 -06:00
Scott Lahteine
9badf5dc0d
Fix Micromake C1 config
2017-11-25 18:41:07 -06:00
Scott Lahteine
7576ad7fc2
Merge pull request #8554 from tcm0116/2.0.x-cleanup
...
[2.0.x] Fix for #8525 and other cleanup
2017-11-25 18:19:54 -06:00
Scott Lahteine
27c5692b13
Syntax tweaks
2017-11-25 18:13:36 -06:00
Scott Lahteine
d18d40e1d6
M290 report on change, P0 to leave Probe Z Offset alone
2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f
[2.0.x] G33 probe error handling
2017-11-25 16:19:10 -06:00
Bob-the-Kuhn
8c69adba8b
Merge pull request #8553 from Bob-the-Kuhn/2.0.x-U8Glib-follow-up
...
[2.0.X] U8Glib follow up
2017-11-25 14:26:32 -06:00
Scott Lahteine
be00e421a7
Patch up M290, M851
2017-11-25 14:11:57 -06:00
Bob-the-Kuhn
fc40d56131
fixed error, updated defaults, added notes
...
Travis fix - only allow ultralcd_st7920_u8glib_rrd_AVR.cpp to compile when ST7920 selected
2017-11-25 12:35:03 -06:00
Roxy-3D
d29cb646e3
Fix erroneous reference to temperature in time calculations
...
Travis is having problems at: https://github.com/MarlinFirmware/Marlin/pull/8560
So... doing a direct commit to get things correct. Bugfix_v1.1.x does not have this bug. Nothing needs to be done to that branch.
2017-11-25 10:40:56 -06:00
Thomas Moore
7bb1721f35
Fix _BV already defined warnings for Teensy
2017-11-24 22:34:39 -06:00
Thomas Moore
5f9592a523
Cleanup narrowing warning in pin_is_protected
2017-11-24 22:15:56 -06:00
Thomas Moore
34eaaab5fb
Fix _BV already defined warnings
2017-11-24 21:59:31 -06:00
Thomas Moore
2ea779e560
Allow bed probe sanity checks to run
2017-11-24 21:59:01 -06:00
Scott Lahteine
d24b1190bd
Don't use Z_MIN_PROBE_ENDSTOP on DELTA
2017-11-24 18:24:22 -06:00
Scott Lahteine
e34c6827ea
Init MIXING virtual tools as switching
2017-11-24 18:02:09 -06:00
Scott Lahteine
a9ecb975b2
Apply LINEAR_UNIT to M503 output for M200
2017-11-24 17:32:48 -06:00
Scott Lahteine
d95ee0f003
Merge pull request #8551 from revilor/bugfix-2.0.x
...
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 17:16:23 -06:00
Scott Lahteine
80ada58818
One fewer function call in probe_pt
2017-11-24 17:10:38 -06:00
oliver
92a0dc552a
MK2_MULTIPLEXER does not require E2/E3 stepper pins
2017-11-24 23:56:39 +01:00
Scott Lahteine
b49acce035
Tweaks for lcd_external_control
2017-11-24 15:53:25 -06:00
Scott Lahteine
1ef1052ae1
Phatter arrows for Z offset overlay
2017-11-24 15:53:25 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 13:11:14 -06:00
Scott Lahteine
01e207213f
Fix MK2_MULTIPLEXER stepper indirection
2017-11-24 12:49:28 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb
Adapt G26 to work for all meshes
2017-11-23 22:31:37 -06:00
Scott Lahteine
5ce7f23afa
Config option G26_MESH_VALIDATION for all meshes
2017-11-23 21:43:23 -06:00
Scott Lahteine
c19eb33408
Move G26 to gcode sub-folder
2017-11-23 21:43:23 -06:00
Scott Lahteine
a03f93bab4
Fix fan kickstart
2017-11-23 21:42:45 -06:00
Scott Lahteine
9e3c41f9e8
Tweak fan kickstart / speed code
2017-11-23 15:20:35 -06:00
GMagician
118ac61e59
[2.0.x] Tool change bad behaviour fix
...
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
2017-11-22 20:24:03 -06:00
Scott Lahteine
c35d27f77c
Merge pull request #8299 from tcm0116/2.0.x-BIQU_BQ111-A4
...
[2.0.x] Add BIQU BQ111-A4 board
2017-11-22 19:16:04 -06:00
Scott Lahteine
1685cd193b
Tweak char_mode init
2017-11-22 19:12:08 -06:00
Scott Lahteine
9406c87a97
Fix up LCD init / charset
2017-11-22 18:22:55 -06:00
Thomas Moore
fa577392b2
Add BIQU BQ111-A4 board
2017-11-22 16:34:59 -06:00
Scott Lahteine
c2fc78c3a8
#ifndef => #if !PIN_EXISTS
2017-11-22 16:28:52 -06:00
Scott Lahteine
c613a1ed38
Fix indentation, stepper.h dependency, etc.
2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771
Board definitions for Ultratronics Pro v1.0
2017-11-22 14:55:24 -06:00
Bob-the-Kuhn
9dad534f02
fixed
2017-11-21 21:37:20 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
2017-11-21 18:23:39 -06:00
Scott Lahteine
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
2017-11-21 16:12:40 -06:00
Scott Lahteine
3994d3b935
General cosmetic LCD
2017-11-21 16:12:40 -06:00
Scott Lahteine
617993d0ea
Patch for !!TEST (was _BV once?)
2017-11-21 16:12:08 -06:00
Scott Lahteine
3269d8dd62
Tweak M42 var
2017-11-21 16:12:08 -06:00
Mateusz Krawczuk
bb1a6eea88
Remove pin count check for MIGTHYBOARD_REVE
...
Remove assert and unused code since it is implemented in pinsDebug_plus_70.h
2017-11-21 14:38:02 +01:00
Scott Lahteine
1ce0fb336b
Patch Max7219_LED_Set input args
2017-11-20 21:15:15 -06:00
GMagician
a61127a421
[2.0.x] tool change bad behaviours
...
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Vitaliy Sapyanov
e2724c68ab
Update pins_RURAMPS4D.h
...
Add and bugfix pins
2017-11-20 15:36:13 -06:00
Scott Lahteine
9770062309
Merge pull request #8463 from thinkyhead/bf2_32bit_M42
...
[2.0.x] Updates to Anet A8 configurations
2017-11-20 15:12:30 -06:00
Scott Lahteine
3066655727
Try port*100+pin, fix config dependency
2017-11-20 13:58:23 -06:00
Scott Lahteine
ba8bc7ea80
Cosmetic tweaks
2017-11-20 13:58:02 -06:00
Scott Lahteine
f409147116
Fix P2_04, P2_05
2017-11-20 13:58:02 -06:00
Bob-the-Kuhn
a28ccabe2a
M42 P1.20 fix
2017-11-20 13:58:02 -06:00
Unknown
33912fa7e8
Update Temperature::setPwmFrequency prototype to match source
...
Introduced with #8446
2017-11-20 01:50:41 -08:00
Scott Lahteine
b9327a4d16
Misc. general cleanup
2017-11-19 15:43:39 -06:00
Scott Lahteine
8836623e0f
Fix sq/min/max macros after platform headers
2017-11-19 15:43:39 -06:00
Scott Lahteine
fe4f009fdd
32-bit unless…
2017-11-19 15:43:38 -06:00
Scott Lahteine
25af9decfe
Remove enum.h include of MarlinConfig.h
2017-11-19 15:43:38 -06:00
Scott Lahteine
1d4571b88d
Dependency adjustments
2017-11-19 15:43:38 -06:00
