Some ST7920 parity with 1.1.x

Possibly more should be brought over? Discussion at #8471
This commit is contained in:
Scott Lahteine 2017-12-05 02:18:25 -06:00
parent 3748c28924
commit 4d3c3d0b73

View File

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -54,15 +54,15 @@
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_0_NOP
#define CPU_ST7920_DELAY_3 DELAY_1_NOP
#elif (MOTHERBOARD == BOARD_3DRAG) || (MOTHERBOARD == BOARD_K8200) || (MOTHERBOARD == BOARD_K8400)
#elif MB(3DRAG) || MB(K8200) || MB(K8400) || MB(SILVER_GATE)
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_3_NOP
#define CPU_ST7920_DELAY_3 DELAY_0_NOP
#elif (MOTHERBOARD == BOARD_MINIRAMBO)
#elif MB(MINIRAMBO)
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_4_NOP
#define CPU_ST7920_DELAY_3 DELAY_0_NOP
#elif (MOTHERBOARD == BOARD_RAMBO)
#elif MB(RAMBO)
#define CPU_ST7920_DELAY_1 DELAY_0_NOP
#define CPU_ST7920_DELAY_2 DELAY_0_NOP
#define CPU_ST7920_DELAY_3 DELAY_0_NOP
@ -101,7 +101,7 @@ static void ST7920_WRITE_BYTE(uint8_t val) {
#define ST7920_SET_CMD() { ST7920_WRITE_BYTE(0xF8); U8G_DELAY(); }
#define ST7920_SET_DAT() { ST7920_WRITE_BYTE(0xFA); U8G_DELAY(); }
#define ST7920_WRITE_NIBBLES(a) { ST7920_WRITE_BYTE((uint8_t)((a)&0xF0u)); ST7920_WRITE_BYTE((uint8_t)((a)<<4u)); U8G_DELAY(); }
#define ST7920_WRITE_NIBBLES(a) { ST7920_WRITE_BYTE((uint8_t)((a)&0xF0u)); ST7920_WRITE_BYTE((uint8_t)((a)<<4u)); U8G_DELAY(); }
#define ST7920_WRITE_NIBBLES_P(p,l) { for (uint8_t i = l + 1; --i;) { ST7920_WRITE_BYTE(*p&0xF0); ST7920_WRITE_BYTE(*p<<4); p++; } U8G_DELAY(); }
@ -137,10 +137,10 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
ST7920_NCS();
}
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT: {
case U8G_DEV_MSG_STOP: break;
case U8G_DEV_MSG_PAGE_NEXT: {
uint8_t* ptr;
u8g_pb_t* pb = (u8g_pb_t*)(dev->dev_mem);
y = pb->p.page_y0;
@ -161,7 +161,6 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
ST7920_WRITE_NIBBLES_P(ptr, (LCD_PIXEL_WIDTH) / 8); //ptr is incremented inside of macro
y++;
}
ST7920_NCS();
}
break;