7462 Commits

Author	SHA1	Message	Date
Dave Johnson	936dfb965c	Clarify LCD_BED_LEVELING requirements ... LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396	2017-08-01 14:13:54 -07:00
Kai	ffe3013bb5	Fix for #7395 ... Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395	2017-08-01 21:45:41 +02:00
Øystein Krog	e948f77cf9	Fix DUAL_X_CARRIAGE not moving at all ... Axis would only move when homing. Bug introduced in 91841d75c9. Fixes #6956, fixes #7050 and fixes #7291	2017-07-31 18:44:26 +02:00
Scott Lahteine	08b0456d91	Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor ... Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-30 05:41:12 -05:00
teemuatlut	936d00dda8	Implement probing delay for piezo sensors	2017-07-29 21:46:40 -05:00
Scott Lahteine	29eef360d0	Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv ... Fixes for FWRETRACT	2017-07-29 21:20:19 -05:00
Wilfried Chauveau	894608f8a3	Manual Bed Leveling: Goto previous Z height at each probe point	2017-07-29 21:15:37 -05:00
Scott Lahteine	ff06e1a030	Merge pull request #7372 from tcm0116/delta_calib_menu ... Move Delta Calibration menu to the Prepare menu	2017-07-29 21:05:03 -05:00
Thomas Moore	15e009b6ca	Move Delta Calibration menu to the Prepare menu	2017-07-28 08:33:18 -05:00
Scott Lahteine	bfd396c13a	Patch to fix some compiler warnings	2017-07-28 02:27:16 -05:00
Scott Lahteine	48c5f3dddf	Tweak kill action #ifdef	2017-07-27 23:42:01 -05:00
Scott Lahteine	be7a9a07c5	Don't reset grid with G29 Q + PROBE_MANUALLY	2017-07-27 22:47:43 -05:00
Scott Lahteine	dfe670247d	Merge pull request #7363 from marcio-ao/bugfix-1.1.x ... Makefile fixes and U8G support.	2017-07-27 21:31:56 -05:00
Marcio Teixeira	af83c512b8	Added support for U8G.	2017-07-27 07:49:25 -06:00
Scott Lahteine	4eff18854b	Rename options with swap_ prefix	2017-07-27 04:14:29 -05:00
Scott Lahteine	14482d2f2a	Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo	2017-07-27 04:14:29 -05:00
Scott Lahteine	9fc72422e4	Don't let the flow multiplier affect retract/recover length	2017-07-27 04:14:29 -05:00
Scott Lahteine	fee696db5d	Improve retract() for G10/G11/autoretract	2017-07-27 04:14:29 -05:00
Scott Lahteine	423b0f3a1e	Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT	2017-07-27 04:14:29 -05:00
Scott Lahteine	51864fd365	Add bed size as a configuration option	2017-07-26 23:04:54 -05:00
Scott Lahteine	dc7c95e07b	Remove @ section fwretract	2017-07-26 22:46:16 -05:00
Dave Johnson	4718c09c48	Remove extraneous USBCON defines for AT90USB boards ... USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting. more USBCON unification	2017-07-23 16:41:48 -07:00
C. Scott Ananian	890e7a16a9	Add support for Printrbot Neopixel RGBW strip. ... Connected as described at http://printrbot.com/shop/led-strip/ Based on patch by Kelly Anderson <kelly@xilka.com> at http://www.xilka.com/printrbot/marlin/1.1.4/20170707/	2017-07-22 16:07:55 -05:00
Scott Lahteine	a059e95463	Bring Infitary i3 config up to date	2017-07-21 20:49:19 -05:00
Scott Lahteine	d6d6043548	Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin ... MKS 1.3+: Add pin mapping for PS_ON	2017-07-21 20:00:26 -05:00
Alexey Shvetsov	851f9f5399	Update Russian translation - Part 1 ... Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 19:32:37 -05:00
Scott Lahteine	b7a16e4468	Merge pull request #7315 from fixoid/patch-1 ... Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1	2017-07-21 19:10:54 -05:00
Alexey Shvetsov	f38b8c5bf8	MKS 1.3+: Add pin mapping for PS_ON ... This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4). Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>	2017-07-21 18:50:05 -05:00
Scott Lahteine	8a3bc6be4d	Improve FWRETRACT config options and commentary ... Add more details as requested in #7198	2017-07-20 22:57:50 -05:00
Scott Lahteine	b0173ccdb9	Drop extra initializers for vars initialized by EEPROM code	2017-07-20 22:57:49 -05:00
Scott Lahteine	7afafb05b8	Split G10/G11 into separate functions	2017-07-20 02:24:13 -05:00
Scott Lahteine	c45798694f	Add some more requirements to the G-code list	2017-07-20 02:24:13 -05:00
Scott Lahteine	72de280c1e	BARICUDA valve pressure consistently uint8_t	2017-07-20 02:21:40 -05:00
Scott Lahteine	4d98e3f0a7	General cleanup	2017-07-20 02:21:40 -05:00
fixoid	e530c67349	Fixing SWITCHING_EXTRUDER feature	2017-07-19 21:15:26 +03:00
Tannoo	2ad3ca5d8a	Bugfix (#7310)	2017-07-18 22:55:14 -05:00
Roxy-3D	37a6833d7e	Allow the sampled point to be added into the Least Squares Best Fit (#7289) ... Without this... The LSF won't work because none of the sampled points in this code block get added.	2017-07-13 16:33:02 -05:00
C. Scott Ananian	a519b093b9	Fix build by replacing qr_solve by least_squares_fit. (#7285) ... This was broken by 9af67e2446.	2017-07-13 12:02:15 -05:00
Scott Lahteine	0873c667fa	Apply coding standards to recent merges	2017-07-13 00:46:16 -05:00
Scott Lahteine	8c2907d10f	Fix ABL broken by recent change	2017-07-12 22:56:18 -05:00
Roxy-3D	9af67e2446	Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276) ... We can save more and a pile of RAM by eleminating the eqnBVector and EqnAMatrix arrays next.	2017-07-10 19:05:11 -05:00
Scott Lahteine	76e90b93b7	Volatile keyword not needed for parser.seen	2017-07-10 15:38:54 -05:00
Jamie Bainbridge	00e4ced58e	Stay in User Menu after command. Add feedback. ... When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu. This PR modifies Marlin to stay in the User Menu after a command.	2017-07-10 13:47:12 -05:00
Scott Lahteine	1066b17457	Merge pull request #7260 from thinkyhead/bf_G33_update_27 ... Updates to G33 and its LCD code	2017-07-10 13:39:36 -05:00
Tannoo	e927941c06	Bugfix (#7265) ... Fix compile error when UBL is enabled but there is no LCD Panel.	2017-07-08 09:44:50 -05:00
Scott Lahteine	68aea9c01d	Merge pull request #7261 from thinkyhead/bf_configs_by_vendor ... Arrange more example configs by vendor	2017-07-07 15:46:22 -05:00
Tannoo	aaacef9441	Corrections (#7231) ... 20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.	2017-07-07 11:05:08 -05:00
LVD-AC	4bc79ec877	Updates for G33-LCD interface	2017-07-07 05:00:59 -05:00
Scott Lahteine	186580b55f	Arrange example configurations by vendor	2017-07-07 04:48:23 -05:00
Scott Lahteine	6be369f3ea	Add some config names to AUTHOR	2017-07-07 04:46:33 -05:00
Scott Lahteine	7fc31a7940	Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio ... Add support for BQ heated bed kit with Hephestos 2	2017-07-07 04:11:07 -05:00
Scott Lahteine	11e376e920	Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 ... Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-07 03:22:47 -05:00
João Brázio	2065591daf	Add support for BQ heated bed kit with Hephestos 2	2017-07-07 03:10:38 -05:00
essgcee	61be28133d	Support for Creality CR-10 ... Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)	2017-07-06 23:08:10 -05:00
Scott Lahteine	9248a90a4c	Assign -1 to LCD_PINS_D4-7 if not defined	2017-07-06 22:47:51 -05:00
Scott Lahteine	5ef1e5ef60	Tweaks for M43	2017-07-06 21:47:50 -05:00
Scott Lahteine	c7732db99d	Fix: Use of digitalRead, digitalWrite breaks on AT90USB	2017-07-06 21:25:56 -05:00
Scott Lahteine	f713f25fa5	Clean up excess whitespace	2017-07-06 21:24:30 -05:00
Scott Lahteine	fc9ce65095	Add BUSY_WHILE_HEATING for hosts that need it	2017-07-06 16:28:57 -05:00
Scott Lahteine	c6d430670a	Clear SHOW_BOOTSCREEN with no LCD	2017-07-06 14:21:27 -05:00
Scott Lahteine	11c589c3ec	Fix compile issue with G38 ... Fixes #7250	2017-07-06 14:21:27 -05:00
Scott Lahteine	678914be25	Patch M23 to work around Simplify3D bug ... Addressing #7227	2017-07-06 14:00:58 -05:00
LVD-AC	3efe4aeef8	Add PROBE_MANUALLY support to G33	2017-07-04 18:06:54 -05:00
Scott Lahteine	cca1cca3a5	Merge pull request #7237 from thinkyhead/bf_cz_mapper ... UTF-8 mapper for Czech	2017-07-04 16:45:13 -05:00
Scott Lahteine	a2babb532d	Merge pull request #7217 from benlye/add-kill-action ... Add configurable action command to send when printer is killed	2017-07-04 16:44:08 -05:00
Petr Zahradník	8c34233452	UTF-8 mapper for Czech	2017-07-04 15:51:23 -05:00
Dave Johnson	20f6676d63	DISABLE_[XYZ] compatibility check ... DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING	2017-07-03 17:23:53 -07:00
Ben Lye	c28749a567	Add kill action ... Sends pre-defined string as action command when printer is kill.	2017-07-03 23:45:19 +01:00
Scott Lahteine	df87278fce	Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output	2017-07-03 15:59:06 -05:00
Scott Lahteine	4be8d7720e	Fix spelling of "Chinese"	2017-07-03 15:24:49 -05:00
LVD-AC	567941e341	Fix for issues #6997 and #7152 ... Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.	2017-07-03 02:53:49 -05:00
Scott Lahteine	57fff2e95e	Merge pull request #7219 from thinkyhead/bf_update_git_scripts ... Update Marlin+git helper scripts	2017-07-03 01:49:27 -05:00
Scott Lahteine	6a3967ee33	Corrections for probe_pt parameters	2017-07-03 01:34:27 -05:00
Scott Lahteine	534bffa7a9	Correct comment on ABL G29	2017-07-03 01:13:07 -05:00
Scott Lahteine	e1e1a0c344	Provide a default CUSTOM_BOOTSCREEN_TIMEOUT	2017-07-03 01:13:07 -05:00
Scott Lahteine	69297b2d7b	Make all EEPROM optimization options available	2017-07-02 20:47:03 -05:00
Scott Lahteine	d609489b22	Drop setup_homepin	2017-07-02 02:27:09 -05:00
Scott Lahteine	167169e1bf	Sanity check for a real probe with M48	2017-07-02 02:27:09 -05:00
Scott Lahteine	395a9f59ac	Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen ... Use lcd_bootscreen for both	2017-07-02 02:11:07 -05:00
Scott Lahteine	14663efe0d	Merge pull request #7210 from fiveangle/printrboard_revf_cleanup ... Printrboard RevF cleanup	2017-07-02 01:02:26 -05:00
Scott Lahteine	ae5923a3d0	Make lcd_bootscreen common to both	2017-07-02 00:47:36 -05:00
Scott Lahteine	859248433f	Patch for gcode debug	2017-07-02 00:47:35 -05:00
Dave Johnson	09c90c2f6c	Printrboard RevF Cleanup ... -Update Arduino IDE extension descriptions -Set default motor currents if not defined in Configuration_adv.h -Support for MINIPANEL LCD -Support for choosing internal or panel SD	2017-07-01 22:33:39 -07:00
Scott Lahteine	232a10410d	LCD_FOR_MELZI	2017-07-01 22:32:20 -05:00
Scott Lahteine	76c92a1fab	Clean up some trailing spaces	2017-07-01 22:32:20 -05:00
Scott Lahteine	cf96109056	Implement the EEPROM_CHITCHAT option	2017-07-01 21:48:18 -05:00
Scott Lahteine	dcec7178d1	Expose DISABLE_M503 option as a test option	2017-07-01 21:31:28 -05:00
Scott Lahteine	3e78a01262	Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd ... UBL radar map corrections	2017-07-01 20:59:03 -05:00
Tom	1ff7d10c80	Add configuration for Infitary M508 (i3 clone) ... Based on Infitary's own firmware settings.	2017-07-01 20:04:08 -05:00
Scott Lahteine	4cb45c10dd	Patch ubl lcd mesh map indentation	2017-07-01 19:47:52 -05:00
Scott Lahteine	abd6ba62b4	Some cleanups for ubl lcd mesh map	2017-07-01 19:47:49 -05:00
Scott Lahteine	f17bae1f70	Changes for ubl_lcd_map_control patch	2017-07-01 19:47:02 -05:00
Tannoo	8e0f3b7eba	UBL radar map corrections	2017-07-01 19:00:44 -05:00
Bob-the-Kuhn	fcceed5be6	intermittent Teensy & G26 compile problem ... =============================================== also an issue with ubl_motion.cpp	2017-07-01 14:41:24 -05:00
Scott Lahteine	30b327d24c	Finish the solution for #7166	2017-06-29 15:17:39 -05:00
Scott Lahteine	6c97c5595c	Add a sanity check for DELTA_AUTO_CALIBRATION	2017-06-29 15:03:19 -05:00
Bob-the-Kuhn	e6e3132f79	make LETTTER_OFF return values that match param indices range	2017-06-29 09:01:58 -05:00
Bob-the-Kuhn	bfbf5f8200	correct value_bool() when FASTER_GCODE_PARSER is enabled ... Also corrected compile issue when DEBUG_GCODE_PARSER and AUTO_BED_LEVELING_UBL are both enabled.	2017-06-28 19:51:08 -05:00
Scott Lahteine	406ef69702	Move Anet A8 config to subfolder	2017-06-28 16:58:57 -05:00
Scott Lahteine	379926961c	Add Anet A6 config, edit Anet A8 config	2017-06-28 16:58:57 -05:00
Scott Lahteine	5b03f23fa2	Bring configurations up to date, fix some comments	2017-06-28 16:41:49 -05:00
Scott Lahteine	e3cedfa0ec	Fix a compiler warning	2017-06-28 16:41:46 -05:00
Scott Lahteine	bb0508b6cf	Fix comment in M115 code	2017-06-28 13:08:33 -05:00
Scott Lahteine	85777a56c6	Add A (action) and E (echo) parameters to M118	2017-06-28 02:07:59 -05:00
Scott Lahteine	d1e8d4cd9d	Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update ... UBL Map Cleanup and LCD display	2017-06-28 01:20:22 -05:00
Scott Lahteine	b492e0878d	Changes to reduce and simplify	2017-06-28 01:10:30 -05:00
Ben Lye	98d362c2da	Adding M118 command to send text to serial ... Allows the user to send text to the serial console in order to communicate with a host - sending debuging information or action commands, for example. Text must begin with '//' and this is added if it is not already present at the beginning of the string.	2017-06-28 00:55:20 -05:00
Tannoo	80abc872f3	Updated to better support the coming "radar"	2017-06-27 22:51:58 -05:00
Tannoo	e90cbf5c16	UBL Map Cleanup	2017-06-27 22:51:58 -05:00
Scott Lahteine	fc140c4962	Followup for I2C_POSITION_ENCODERS	2017-06-27 20:46:40 -05:00
Scott Lahteine	f4246dc8ff	Merge pull request #7165 from thinkyhead/bf_parser_shorthand ... Use parser.seenval, add shorthand functions	2017-06-27 18:57:48 -05:00
Scott Lahteine	bd776df8c1	Optimize seen_axis by moving 'X' to index 24	2017-06-27 18:47:11 -05:00
Scott Lahteine	05449cf6ee	Add shorthand value accessors to gcode.h	2017-06-27 18:39:41 -05:00
Scott Lahteine	12f092c812	Cleanups to gcode.h, use seenval()	2017-06-27 17:57:00 -05:00
Scott Lahteine	941943c167	Apply const, spacing, etc.	2017-06-27 05:23:49 -05:00
Scott Lahteine	5b11b33854	Add support for Průša MK2 Multiplexer	2017-06-27 04:55:30 -05:00
Scott Lahteine	a4a587a897	Fix spelling of Průša	2017-06-27 04:46:46 -05:00
Scott Lahteine	ba1706a265	Fix spacing in gcode.cpp ... Followup to #6940	2017-06-27 04:46:46 -05:00
Scott Lahteine	c2c8aafda2	Merge pull request #7157 from thinkyhead/bf_g33_f_parameter ... G33 F and Height bug fix	2017-06-27 04:36:22 -05:00
Scott Lahteine	627afb29df	Merge pull request #7109 from tnw513/fix-italian ... added missing italian translation	2017-06-27 04:12:30 -05:00
Scott Lahteine	f0f9fb7465	Remove line that does nothing	2017-06-27 04:08:50 -05:00
LVD-AC	99592c8458	Update G33: Add F, fix height bug	2017-06-27 04:02:02 -05:00
Ben Lye	31514f453a	Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug ... Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries to enumerate pins 46 and 47 (which don't exist) because `#ifdef AVR_AT90USB1286_FAMILY ` doesn't work as expected.	2017-06-27 08:04:40 +01:00
Scott Lahteine	134116b874	Merge pull request #7153 from thinkyhead/bf_czech_update ... Updated Czech language	2017-06-26 17:34:15 -05:00
Petr Zahradník	e80958b631	CZ Translate BLTouch and UBL ... Fixup length	2017-06-26 16:15:31 -05:00
Scott Lahteine	fe7e890b09	Fix issues with ADC_KEYPAD ... Fixes #7150	2017-06-26 16:08:31 -05:00
dot-bob	a1632cfa0a	Added option 'H' to G29 P4. ... - Added `H` to set a nozzle height adjustment to surface of the bed. - Updated G29 P4 comments to reflect changes.	2017-06-25 17:14:08 -05:00
Scott Lahteine	e687782875	Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready ... Add Skynet/ANET A10 support	2017-06-25 14:35:22 -05:00
dot-bob	b3c36c98fd	Edit digipot currents via LCD, save to EEPROM	2017-06-25 01:02:36 -05:00
Scott Lahteine	3c7bfe798d	Various cleanups ahead of digipot save	2017-06-24 23:56:24 -05:00
Bob-the-Kuhn	9651d01e1a	Add Skynet/ANET A10 support	2017-06-24 19:07:03 -05:00
Scott Lahteine	eb314373bb	Config spacing & consistency, group custom LCDs	2017-06-24 14:33:40 -05:00
Scott Lahteine	6c45fa7dcc	Apply #elif in LCD conditionals	2017-06-24 13:56:33 -05:00
Scott Lahteine	afbc6e3e2f	Update DELTA/SCARA config comments	2017-06-24 12:47:17 -05:00
Paweł Stawicki	1e47c17b46	Fix: set digipot mcp4018 Vrefmax to 1.666V	2017-06-24 12:35:34 -05:00
Scott Lahteine	80a232419d	CNC workspace planes and 'P' argument for G2/G3	2017-06-23 14:53:03 -05:00
Scott Lahteine	5fb0d401eb	Formatting tweaks	2017-06-23 14:53:02 -05:00
Scott Lahteine	ed04d0b6be	Label DualXMode enums	2017-06-23 14:53:02 -05:00
Scott Lahteine	786cdea124	Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined	2017-06-23 14:53:01 -05:00
Scott Lahteine	ee7163fd3a	Fix pinsDebug compile errors	2017-06-23 14:53:01 -05:00
Scott Lahteine	a9f8e518bf	Fix FILAMENT_WIDTH_SENSOR infinite loop issue ... Addressing #6992 and #5851	2017-06-23 14:53:01 -05:00
Scott Lahteine	254a11b083	Merge pull request #7120 from thinkyhead/bf_sainsmart_link ... Add link to F. Malpartida LiquidCrystal library	2017-06-22 14:04:23 -05:00
Scott Lahteine	aeb6d465a4	Merge pull request #7118 from thinkyhead/bf_french_update ... French update	2017-06-22 13:10:07 -05:00
Bob-the-Kuhn	325f09ea6c	Add link to custom LiquidCrystal library by F. Malpartida	2017-06-22 13:07:08 -05:00
MagoKimbra	d26c8cc5c8	fix_planner_refresh_e_positioning (#7103) ... * fix_planner_refresh_e_positioning * Fix	2017-06-22 12:59:22 -05:00
Gege2B	c7f04fbcc7	French translation	2017-06-22 12:49:23 -05:00
Silvio Didonna	4171520729	added missing italian translation	2017-06-21 11:08:39 +02:00
Bob-the-Kuhn	41bfff14e2	Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping ... Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check	2017-06-20 16:36:22 -05:00
Scott Lahteine	424d0bae8b	Merge pull request #7100 from thinkyhead/bf_HAL_prepare ... Apply maths macros and type changes ahead of HAL	2017-06-20 01:15:23 -05:00
Scott Lahteine	5c59ee4e93	Use current (raw) Z if omitted from G29 WXY or G29 WIJ.	2017-06-20 00:10:52 -05:00
Scott Lahteine	37bc0fce62	Make G29 compatible with M206 Z and G92 Z ... Use the raw position for mesh measurement. Otherwise the `M206` and `M92` Z offsets will get canceled out by bed leveling. The downside is `G29` will not compensate for a poorly set small `M206` fudge value. To elaborate on this issue, imagine you are probing with a Z home offset of -0.1, meaning when Z homes, -0.1 is the current position, implying the ideal bed zero for the nozzle is 0.1mm higher than the Z endstop. Ordinarily when printing, Z would raise 0.1mm higher. What happens when we probe is that all points are measured with that -0.1 included. So when bed leveling is enabled the `M206 Z` offset gets exactly canceled out by the bed readings.	2017-06-20 00:09:59 -05:00
Scott Lahteine	6c45d0fd81	Apply maths macros and type changes ahead of HAL	2017-06-19 22:57:42 -05:00
Scott Lahteine	8a51e2960c	Improve the experience of editing steps_per_mm	2017-06-19 22:17:15 -05:00
Scott Lahteine	725d9d9a56	Fix and improve LCD value editing display ... - Fix: When "100.0" changes to "99.0" the LCD shows "199.0" - Use 2 rows if needed on character LCD, (allowing longer labels… Germany, et. al.) - Known issue: A certain length label combined with a certain value drawing function could, for example, display 99.0 on 1 line, but 100.0 on two lines. Workaround would be to pass a nominal value size argument.	2017-06-19 22:17:15 -05:00
Scott Lahteine	499bb85a95	Clean up, put ubl menu itemization closer at hand	2017-06-19 22:17:14 -05:00
Tannoo	90f5f82926	Step-by-Step Menu addition	2017-06-19 20:15:11 -05:00
Scott Lahteine	0c616700f3	Merge pull request #7097 from thinkyhead/bf_dac_percents_fix ... Convert DAC percent to uint8_t	2017-06-19 17:58:55 -05:00
Florian Heilmann	6dcf42f1a7	Add Z Fade Height to M420 output if it is enabled (#7042) ... * Add Z Fade Height to M420 Output Echo the z-fade height when M420 is called, if it is enabled. * Fix Whitespace * Fix Compiler complaint * Missing semi-colon	2017-06-19 17:53:07 -05:00
Bob-the-Kuhn	a1c65fd3d5	convert DAC percent to uint8_t ... ===================== add test to Travis	2017-06-19 17:46:41 -05:00
Scott Lahteine	907cafcbfd	Support for two switching extruders	2017-06-19 17:20:59 -05:00
Ross Allan	cfcd069501	Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0	2017-06-19 14:02:17 -05:00
Scott Lahteine	b8b7ef1902	Merge pull request #7090 from thinkyhead/bf_italian_refix ... Fix Italian language mapper	2017-06-19 09:27:13 -05:00
Scott Lahteine	42f7f9e013	Merge pull request #7060 from bgort/i2cpefix ... I2C Position Encoders Example Configs	2017-06-19 01:08:42 -05:00
Scott Lahteine	0b49bddec2	Fix Italian language mapper	2017-06-19 01:01:40 -05:00
Silvio Didonna	2e26a7c752	Added missing Italian translations	2017-06-18 23:37:48 -05:00
Scott Lahteine	4c3dc8bf07	Remove set_current_to_destination from resume_print ... Addressing #7057	2017-06-18 23:01:13 -05:00
Scott Lahteine	4857a3ba48	Formatting and spelling	2017-06-18 23:01:12 -05:00
Thomas Moore	3d24c329af	M600 fixes	2017-06-18 23:00:56 -05:00
Bob-the-Kuhn	8fb30aaed6	warn user of an invalid combination	2017-06-17 15:04:47 -05:00
Bob-the-Kuhn	6cb9bb27fe	Move lcd_refresh_zprobe_zoffset definition	2017-06-16 21:46:33 -05:00
Scott Lahteine	d4270f15a9	Spacing tweak in setup()	2017-06-16 14:21:05 -05:00
Scott Lahteine	c61c0a9aeb	Fix status message missing "blink"	2017-06-16 14:18:19 -05:00
Scott Lahteine	062131554f	Followup to #7045	2017-06-16 14:18:19 -05:00
Jim Brown	3d043976f7	Add option to disallow filament change without homing first	2017-06-16 13:32:17 -05:00
Scott Lahteine	93da4e83f7	One more space on a short status message	2017-06-16 12:58:25 -05:00
Scott Lahteine	7c95f762f2	Show LCD bed options even without thermal protection	2017-06-15 15:29:56 -05:00
Scott Lahteine	92eb55f246	Reject generous donation of trailing whitespace	2017-06-15 15:25:24 -05:00
Scott Lahteine	428be27893	Formatting adjustments	2017-06-15 15:25:24 -05:00
Scott Lahteine	8d5a37fb3d	Support for a 5th stepper in stepper code	2017-06-15 15:25:23 -05:00
Scott Lahteine	7769a22064	Tweaks to temperature code	2017-06-15 15:25:23 -05:00
Scott Lahteine	d9da126776	Cleanups for UBL / ultralcd.cpp	2017-06-15 15:22:36 -05:00
Scott Lahteine	499d5c3b24	Fix scrolling lcd message for DOGM	2017-06-15 15:07:39 -05:00
Scott Lahteine	7164fd499e	Tweak to G33 P error	2017-06-15 14:43:40 -05:00
Scott Lahteine	c10d763d98	Simpler prepare move conditions	2017-06-15 14:43:40 -05:00
Scott Lahteine	4ebff8eaa5	Drop fastio timer cruft	2017-06-15 14:43:40 -05:00
Scott Lahteine	09bc34f4dc	Allow arbitrarily long retraction	2017-06-15 14:43:30 -05:00
Scott Lahteine	4414825e0d	Merge pull request #7038 from thinkyhead/bf_PCA9632 ... PCA9632 PWM color LED support	2017-06-15 14:41:24 -05:00
Bob-the-Kuhn	9dda022705	fix compile errors ... ================================ Changed to conditional compile for AT90USB issue	2017-06-15 13:18:14 -05:00
Bob-the-Kuhn	b3338ccb01	Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs ... SD card soft SPI - allow all CPU families to use it	2017-06-15 01:03:39 -05:00
Brian	40bb0cbf7a	example configurations, etc.	2017-06-14 18:04:28 -04:00
Jim Brown	26d20ebcfc	Don't allow filament change without homing first (#7054)	2017-06-13 17:11:37 -05:00
Roxy-3D	824f71d503	LCD Panel Interactive Mesh Editing (#7045) ... Original Mesh Bed Leveling replacement put at top of UBL Menu Options to help facilitate the removal of the Original Mesh Bed Leveling. Radar display (and control) of the UBL Interactive Mesh Editing.	2017-06-12 18:26:49 -05:00
Scott Lahteine	445227c807	Fix missing LCD_STR_REFRESH	2017-06-12 01:28:52 -05:00
Scott Lahteine	699aa35df6	Code cleanup for G33	2017-06-12 01:25:40 -05:00
dot-bob	0bc66bf22c	PCA9632 PWM color LED support ... Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.	2017-06-12 01:09:24 -05:00
Luc Van Daele	896dfa0577	G33 eccentric probe fixes (#6850) ... * excentric probe config fix * undo last commit * eccentric probe fix * oops * !stow after each probe * deploy/stow fix * E parameter + bit of cleanup * comment * LCD menu fix	2017-06-12 01:07:19 -05:00
Thomas Moore	e47029199e	Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000) ... * Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF * Add HEATER_IDLE_HANDLER conditional	2017-06-12 00:22:31 -05:00
Scott Lahteine	8326c1c279	Merge pull request #7005 from Diederikvanderpant/bugfix-1.1.x ... added shift register pins for reprapworld keypad v1.1	2017-06-11 23:12:11 -05:00
Scott Lahteine	07f8da36d2	CL-260 configs	2017-06-11 19:40:13 -05:00
Scott Lahteine	dce665a083	Merge pull request #7025 from magnuspub/patch-1 ... Mod in language_it.h	2017-06-11 19:09:46 -05:00
Scott Lahteine	7b09ab6bda	Merge pull request #7033 from Bob-the-Kuhn/pinsDebug-&-dac_mcp4728-fixes ... Fix pinsDebug problem & add capability to display more than 70 pins	2017-06-11 19:09:09 -05:00
Scott Lahteine	5bdb4bbc5e	Merge pull request #7030 from thinkyhead/bf_circular_scroll ... Circular scrolling of the status message	2017-06-11 19:07:38 -05:00
Federico	772275ab0c	Create language_it.h	2017-06-11 10:37:34 +02:00
Bob-the-Kuhn	11e28f389e	fix pinsDebug.h error, add capability to display more than 70 pins.	2017-06-10 22:01:15 -05:00
Scott Lahteine	21217d53df	Circular scrolling of the status message	2017-06-10 20:56:00 -05:00
Scott Lahteine	da8e946efb	Reduce size of heater state print code	2017-06-10 20:26:17 -05:00
Scott Lahteine	dde8bb7c8b	Fix extrude_min_temp compiler warning	2017-06-10 20:07:36 -05:00
Scott Lahteine	83263076dc	Merge pull request #7014 from fiveangle/fix_get-set_DrvPct_declarations ... fix get/setDrvPct declarations	2017-06-10 19:06:50 -05:00
Scott Lahteine	57a51fd5db	Tweak some else clauses	2017-06-10 16:40:10 -05:00
Scott Lahteine	fc89de6d8b	Followup to German language update	2017-06-10 16:27:39 -05:00
Federico	92011e3d8c	Create language_it.h	2017-06-10 21:50:14 +02:00
Dave Johnson	7864b133a8	Fix get/setDrvPct declarations	2017-06-09 20:21:28 -07:00
Scott Lahteine	0b6b7c9c7e	Merge pull request #7013 from thinkyhead/bf_german_update ... Update language_de.h	2017-06-09 21:41:19 -05:00
Scott Lahteine	f17a3c2474	Merge pull request #6889 from thinkyhead/bf_at90usb_mapping ... Unify all AVR90USB pin mappings	2017-06-09 21:00:13 -05:00
Kai	5a72b6818e	update language_de.h ... Following #6990 some more translations and some grammar fixes	2017-06-09 19:45:09 -05:00
Scott Lahteine	4cc5444144	Merge pull request #7008 from Bob-the-Kuhn/Z_MIN_PROBE_ENDSTOP-and-Z_MAX_PIN ... Can't use "#define Z_MIN_PROBE_PIN Z_MAX_PIN" in configuration.h	2017-06-09 19:42:56 -05:00
Scott Lahteine	51bc50214a	Save 8 bytes of SRAM	2017-06-09 19:20:16 -05:00
Scott Lahteine	748bf32388	Unify AVR90USB: pinsDebug changes	2017-06-09 19:20:16 -05:00
Scott Lahteine	5426fc1735	Unify AVR90USB: Pins cleanup	2017-06-09 18:48:12 -05:00
Scott Lahteine	87d8223251	Unify AVR90USB: Pins remap to Arduino	2017-06-09 18:48:12 -05:00
Scott Lahteine	b378deaf89	Unify AVR90USB: fastio changes	2017-06-09 18:21:57 -05:00
Scott Lahteine	e94f79ccea	Patch some serial macros	2017-06-09 17:17:23 -05:00
Scott Lahteine	d91710e9aa	Followup for UBL translated strings	2017-06-09 16:59:26 -05:00
Scott Lahteine	761df686bd	Minor cleanup in gcode.h	2017-06-09 16:59:26 -05:00
Thomas Moore	897bc2ac1f	Updates for ensure_safe_temperature (#6963) ... * Updates for ensure_safe_temperature * M600 fixes	2017-06-09 15:19:08 -05:00
Bob-the-Kuhn	1c107b3949	delete problem line	2017-06-09 11:53:36 -05:00
Diederik van der Pant	5b270417ed	added shift register pins for reprapworld keypad v1.1 ... I recently upgraded my Marlin to V1.1.x and decided to publish my fix to make marlin compile properly when #define board megatronics 2 in combination with #define reprapworld keypad v1.1. It was previously described in the comments of a closed pull request. MarlinFirmware#472. All the buttons on the keypad are now operational.	2017-06-09 14:17:47 +02:00
bgort	2f55870edb	[New Feature] I2C position encoder support (#6946) ... * [New Feature] I2C position encoder support I plan to continue improving/cleaning this up, as there areas that need work. * let the cleanups begin. * progress * more progress * comments, rename files, etc. * clean * Cleanups per thinkyhead * a few more cleanups * cleanups, bugfixes, etc. * remove unnecessary passes_test(), additional cleanups/optimizations * cleanups * misc. * Fix up I2CPEM.init() and a few other things. * organize, fix, rename, etc. * more optimization * a few more tweaks	2017-06-09 08:06:23 -04:00
Bob-the-Kuhn	28d72f48f1	change to DWORD	2017-06-08 16:15:02 -05:00
Bob-the-Kuhn	8d1d9040b6	add static	2017-06-08 14:59:21 -05:00
Bob-the-Kuhn	a17ffe1ece	Merge pull request #6985 from Kaibob2/patch-1 ... Fix for #6980 (case_light compile problem when EXTENDED_CAPABILITIES_REPORT is enabled)	2017-06-08 11:18:56 -05:00
Tannoo	731c8e6372	Translatable Strings for ubl_G29 (#6990)	2017-06-08 10:09:39 -05:00
Kai	abb6b8ad54	update language_de.h (#6986) ... There was quite a lot to translate this time. I'm not absolutely confident with the whole UBL stuff and it's a PITA to translate. I don't use any kind of levelling myself as i just have a perfectly level cast aluminium plate as bed. So maybe someone who really uses it might take a closer look at it after it's merged.	2017-06-08 10:04:52 -05:00
Kai	c2eff60d3f	Fix for #6980 ... Line 7830 prevented successfull compilation when #define CASE_LIGHT_ENABLE is uncommented	2017-06-08 09:19:04 +02:00
Scott Lahteine	1419126721	Merge pull request #6965 from thinkyhead/bf_save_more_sram ... Use createChar_P to save SRAM in bootscreen	2017-06-07 17:34:19 -05:00
Scott Lahteine	a453be7357	Merge pull request #6973 from bgort/autoreportT ... Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 17:33:40 -05:00
Scott Lahteine	1d615e0a67	Merge pull request #6976 from Tannoo/Leveling_in_About_Printer ... Leveling type in About Printer	2017-06-07 17:26:21 -05:00
Scott Lahteine	707707d71a	Fix LCD status message padding	2017-06-07 16:07:38 -05:00
Scott Lahteine	e556ab1dff	Find three-point leveling points on Delta	2017-06-07 16:07:38 -05:00
Scott Lahteine	a27b08e6af	Various code style tweaks	2017-06-07 16:07:38 -05:00
Scott Lahteine	dac29e0f75	Cleaner failure of UBL without EEPROM	2017-06-07 16:07:38 -05:00
Scott Lahteine	9128d9ab45	Improve sanity checks with static_assert, organize	2017-06-07 16:07:38 -05:00
Scott Lahteine	6bb05c4543	Save 20b in smart_fill_mesh with PROGMEM	2017-06-07 16:07:38 -05:00
Scott Lahteine	b7dc4d9973	Save 92b PROGMEM, 14b SRAM with extruder auto fan	2017-06-07 16:07:38 -05:00
Scott Lahteine	c9e3caf928	Save lots of PROGMEM, ~20b SRAM with DIGIPOT_I2C	2017-06-07 16:07:38 -05:00
Scott Lahteine	4134a6b526	Save 88b PROGMEM, 48 bytes SRAM in settings.reset	2017-06-07 16:07:38 -05:00
Scott Lahteine	36cc03a9b4	Save 224b PROGMEM, 48b SRAM in get_homing_bump_feedrate	2017-06-07 16:07:38 -05:00
Scott Lahteine	2a41f0ff84	Save 28b PROGMEM in ultralcd.cpp (line_to_current)	2017-06-07 16:07:38 -05:00
Scott Lahteine	e6d10f6ddd	Spend 48b PROGMEM to save 16b SRAM ... ...by moving `homing_feedrate_mm_s` to PROGMEM.	2017-06-07 16:07:38 -05:00
Scott Lahteine	97e13a30ba	Save over 100 bytes SRAM in pin_is_protected	2017-06-07 16:07:38 -05:00
Scott Lahteine	45c74406cf	Recover 32 bytes of SRAM in Marlin bootscreen code	2017-06-07 16:07:38 -05:00
Scott Lahteine	e1c5a43247	Cleanup stepper current control config options	2017-06-07 16:07:38 -05:00
Scott Lahteine	efc198f952	Spacing, const, comments	2017-06-07 16:07:38 -05:00
Scott Lahteine	4406fba994	Fixes #6975	2017-06-07 11:14:30 -05:00
Scott Lahteine	d28f5d8a78	Fix: z_endstop_adj is never initialized	2017-06-07 10:29:56 -05:00
Scott Lahteine	5d5ff36446	Fix a compile error with _lcd_set_z_fade_height	2017-06-07 10:29:56 -05:00
Tannoo	b88957e0d4	Leveling type in About Printer ... Show the Leveling system in use on the About Printer screen.	2017-06-07 06:28:33 -06:00
Brian	dd071a4a65	Enable AUTO_REPORT_TEMPERATURES by default	2017-06-07 02:52:35 -04:00
bgort	8db1197c9b	Enable extended capabilities report by default (#6969) ... Ref #5139	2017-06-07 02:36:34 -04:00
bgort	82e662fc69	Remove requirement for LCD when UBL is used. (#6971) ... * Remove requirement for LCD when UBL is used. * fix previous oversights * further refinement - error messages for P2 & P4 * require R on G26 when not using LCD; default to all points	2017-06-07 02:24:36 -04:00
Tannoo	2c2b991b59	UBL Manual Build Menu Option (#6972) ... One click option to manually build UBL mesh.	2017-06-06 22:14:18 -05:00
Roxy-3D	0dd0033b33	Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964) ... * Save up to 94 bytes of RAM on 20x4 LCD Display machines Moved the custom screen characters out of RAM into Program Memory. With SD-Card support and the Progress Bar enabled, this saves 94 bytes of RAM memory. This was tested using the example_configurations/FolgerTech-i3-2020 files. So a couple small changes to those files snuck into this Pull Request. Probably... We can find similar savings in the Graphics LCD code it we comb through it. And if so... That is the place we really need to save RAM memory! * Tidy up white space and indentation	2017-06-05 17:02:00 -05:00
Bob-the-Kuhn	ba0bd33c38	Removed check for 2560 family	2017-06-04 22:16:27 -05:00
Scott Lahteine	04b07a6ecc	Unused var in Stepper	2017-06-04 17:25:16 -05:00
Scott Lahteine	eb8af486d2	Ensure safe temperature for M600	2017-06-04 17:25:16 -05:00
Scott Lahteine	bfe7fbe5c0	Maintain message scroll rate	2017-06-04 17:25:15 -05:00
Scott Lahteine	6411d65c48	Fix Morgan SCARA S2 calculation	2017-06-04 12:24:09 -05:00
Scott Lahteine	46752588b9	Merge pull request #6948 from Bob-the-Kuhn/redundant_temperature ... fix redefinition errors for redundant_temperature	2017-06-04 12:16:09 -05:00
Scott Lahteine	5938dae200	Merge pull request #6950 from MagoKimbra/fix_g29_3_point ... Fix G29 with 3 point	2017-06-04 12:15:44 -05:00
Scott Lahteine	c5e0f08e35	Merge pull request #6951 from fixoid/patch-4 ... Initializing extruder/nozzle servo when turning on the printer	2017-06-04 12:13:05 -05:00
Scott Lahteine	e4937b0285	Cleanup of spacing and formatting	2017-06-04 11:31:43 -05:00
fixoid	1aab9906e6	Initializing extruder/nozzle servo when when turning on the printer	2017-06-04 16:57:24 +03:00
MagoKimbra	663ff7f92a	Fix G29 with 3 point	2017-06-04 14:39:31 +02:00
oldmcg	9f295581f0	Ubl delta fixes and improvements (#6941) ... * Change all direct changes of ubl.state.active to set_bed_leveling_enabled() which handles apply/unapply leveling to maintain current_position consistency. Fix invalidation of UBL mesh to invalid unreachable mesh points as well (delta corners). Fix UBL_DELTA unapply_leveling logic and when it gets applied, including fade_height changes. Add optional M114 D for detailed position information, disabled from compilation by default (M114_DETAIL). * UBL_DELTA raw and inline kinematics * UBL planner fall through fix * consistent variable names * Cleanup orphaned code and whitespace changes. Use _O2. * compile warnings cleanup * Remove redundant #ifdef condition	2017-06-03 17:11:43 -05:00
Bob-the-Kuhn	c34d7a29a6	fix redefinition errors for redundant_temperature ... Removing redundant_temperature from public section and leaving it in the private section	2017-06-03 16:40:14 -05:00
Bob-the-Kuhn	6a5d3b580d	fix "hex_address not defined" when UBL is enabled	2017-06-03 13:19:55 -05:00
Scott Lahteine	789b2928a8	Tweak scrolling message code	2017-06-02 23:45:53 -05:00
Scott Lahteine	fc7d7f87b4	Init probe test pin with FastIO	2017-06-02 23:45:52 -05:00
Scott Lahteine	0282452cea	Make Parser::seen volatile	2017-06-02 23:45:52 -05:00
Scott Lahteine	9a305a467b	Patch LCD Contrast menu item	2017-06-02 23:45:52 -05:00
Scott Lahteine	90ccac4bcf	Clean up after recent commits	2017-06-02 23:45:52 -05:00
Bob-the-Kuhn	2130f10de8	allow space between parameter and value	2017-06-02 19:57:22 -05:00
Bob-the-Kuhn	ebda4663c3	for discusion	2017-06-02 19:42:43 -05:00
FATALHERMIT	911079104e	Support for ZRIB v2.0 Control Board	2017-06-02 12:05:46 -05:00
Scott Lahteine	65a0212866	Easier override of FILWIDTH_PIN	2017-06-02 12:05:46 -05:00
Scott Lahteine	147d9d76fc	Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards ... Fix case light logic on Azteeg_X3 boards.	2017-06-01 20:14:15 -05:00
guntherv73	4288c4fb4f	Configurations for Malyan M150	2017-06-01 19:26:29 -05:00
Scott Lahteine	1919cb0d1e	Config cleanups	2017-06-01 19:26:16 -05:00
Bob-the-Kuhn	9a9bbfc57c	Fix case light logic on Azteeg_X3 boards.	2017-06-01 12:33:24 -05:00
Thomas Moore	a32f7b329c	Fix heater status display for advanced pause	2017-06-01 12:29:47 -05:00
Scott Lahteine	445865ea03	REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL	2017-05-31 23:48:03 -05:00
Scott Lahteine	4296a8b74e	For status scrolling, pad a short message	2017-05-31 23:48:03 -05:00
Scott Lahteine	4a96433b7e	Simplify counting of printable characters	2017-05-31 23:45:41 -05:00
Scott Lahteine	8d69394ae1	Fix LCD printing of progmem strings	2017-05-31 23:36:57 -05:00
Scott Lahteine	c74d4dede6	Prevent illegal leveling combinations ... Addressing issue #6901	2017-05-31 23:36:57 -05:00
Scott Lahteine	155aa62fb0	Merge pull request #6912 from thinkyhead/bf_better_pulse_delay ... Account for dual XYZ in pulse delay cycles estimate	2017-05-31 22:21:47 -05:00
Scott Lahteine	a5fa586642	Preferred patch to gcode.h	2017-05-31 21:18:16 -05:00
Bob-the-Kuhn	1b41e1f645	another compile error ... only seen if #if ENABLED(TEMPERATURE_UNITS_SUPPORT) ... #if ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)	2017-05-31 13:59:49 -05:00
Bob-the-Kuhn	65bd4c8c94	Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x) ... M355 case light improvements (replaces PR #5685)	2017-05-31 13:33:59 -05:00
Bob-the-Kuhn	9657e7d3ee	copied file changes from PR #5685 ... ============================== Configuration_adv.h changes ============================== add "live" LCD update ============================== P & S version ============================== final (hopefully) tested version ============================== update M115 capabilities print ============================== Menu changes portion of the requested changes ============================== changed USEABLE_HARDWARE_PWM from a function to a series of macros ============================== changes per review	2017-05-31 13:22:38 -05:00
Bob-the-Kuhn	8206bb9bb9	fix compile error ... invalid conversion from 'const char*' to 'char*' [-fpermissive]	2017-05-31 13:17:01 -05:00
Scott Lahteine	df91346188	Account for dual XYZ in pulse delay cycles estimate	2017-05-31 12:23:28 -05:00
Scott Lahteine	7236109f2a	Patch M24 / M125 for delta	2017-05-30 23:07:29 -05:00
Scott Lahteine	be17033762	Fix case light menu toggle	2017-05-30 14:03:45 -05:00
Scott Lahteine	89b93058e3	Merge pull request #6887 from christianh17/PR-sanitycheck ... enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle	2017-05-30 13:43:39 -05:00
Scott Lahteine	05b66234ae	Merge pull request #6895 from thinkyhead/bf_user_commands ... Custom user commands menu	2017-05-30 13:40:50 -05:00
Scott Lahteine	84a0a77c59	Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance ... Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled	2017-05-30 13:37:51 -05:00
Scott Lahteine	266ae8912a	Formatting in _draw_heater_status	2017-05-30 03:32:16 -05:00
Scott Lahteine	6b9ca16f36	Patch lcd_print edge limit code	2017-05-30 03:32:15 -05:00
Tannoo	74d6dee920	User Command (Script) Menu ... The menu (commands / scripts) is configurable in `Configuration_adv.h`. - Added conditionals. - Changed script handling. - Slimmed and working! - Added Status message. - Returning to lcd status screen now! - Example Configs Updated. - Cleanups by @thinkyhead	2017-05-30 02:33:57 -05:00
Scott Lahteine	d9c8072037	Edit PROPORTIONAL_FONT_RATIO comment	2017-05-30 01:29:39 -05:00
Scott Lahteine	46b32e4548	Cleanup LCD interface, add lcd_reset_status	2017-05-29 22:16:13 -05:00
Scott Lahteine	ca99d67ede	Fix UBL "Info screen" menu items	2017-05-29 19:55:26 -05:00
Scott Lahteine	2c7a39bc0e	Fix LCD print aborted message	2017-05-29 19:52:01 -05:00
Scott Lahteine	0f1e8c195d	Draw on LCD after value has changed	2017-05-29 19:42:30 -05:00
Scott Lahteine	51587c4b43	Rename Feedrate to Velocity to match prior naming	2017-05-29 17:54:15 -05:00
Scott Lahteine	9677f3f2f5	Patch up LCD Bed Leveling menu	2017-05-29 17:51:11 -05:00
Scott Lahteine	fc2eaab7f3	Show home option in level bed menu	2017-05-29 17:51:10 -05:00
Scott Lahteine	c6a7adc293	Patch G29 A and Q arguments to bypass setup	2017-05-29 17:51:10 -05:00
Scott Lahteine	4cece2d72e	Use NAN for G29 W omitted parameters	2017-05-29 17:51:10 -05:00
Scott Lahteine	2d71569138	Fix spacing in JSON output	2017-05-29 17:51:10 -05:00
Scott Lahteine	b2d3c8aedd	Have G28 do a refresh of the display	2017-05-29 17:51:10 -05:00
Scott Lahteine	50ab9c2e04	General cleanup of spacing, comments	2017-05-29 15:34:14 -05:00
Scott Lahteine	f1e33afda4	Return to Bed Leveling menu when done	2017-05-29 15:31:02 -05:00
Scott Lahteine	78d8c598e1	Fix lcd_synchronize with message	2017-05-29 15:31:02 -05:00
Scott Lahteine	eb39d6e3e2	Don't draw progress bar until it has 1%	2017-05-29 15:31:01 -05:00
Scott Lahteine	194f8b2f55	Start at Z=0 in manual probing	2017-05-29 15:31:01 -05:00
Scott Lahteine	6f89db11f0	Allow lcd_setstatusPGM to reset the alert level	2017-05-29 15:31:00 -05:00
Scott Lahteine	3fe333143c	Case light as a toggle menu item	2017-05-28 14:32:07 -05:00
Scott Lahteine	d013bddfa8	Merge pull request #6876 from thinkyhead/bf_extend_leveling_menu ... Extend the ABL/MBL Bed Leveling menu	2017-05-28 14:19:02 -05:00
Scott Lahteine	01e7e234c6	Add more options to the Bed Leveling menu	2017-05-28 14:04:28 -05:00
Scott Lahteine	0cbe448edf	Split up Control > Motion submenu	2017-05-28 12:52:24 -05:00
Scott Lahteine	a3645ec921	Reference op with variable name	2017-05-28 11:33:22 -05:00
Scott Lahteine	71367fd518	Scrolling status message option	2017-05-28 11:26:28 -05:00
Scott Lahteine	b0eae68f57	Prevent bed temperature being set too high	2017-05-28 11:11:17 -05:00
Scott Lahteine	493f0b0c62	Fix some compiler warnings	2017-05-28 11:06:33 -05:00
christianh17	f379a326cc	enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle ... When using switching nozzle it should be possible to disable the servo after move. Do it only if you do not need the servo power to keep the position.	2017-05-28 15:33:28 +02:00
Scott Lahteine	33279a1e02	Code style tweak to gcode.h	2017-05-27 19:47:26 -05:00
Ernesto Martinez	ac959b12ee	Updates to language_es.h based on latest updates. (#6871) ... Spanish language updates	2017-05-27 19:08:39 -05:00
Scott Lahteine	55c700d537	Tweak to gcode.h	2017-05-26 22:11:31 -05:00
Bob-the-Kuhn	868e7db4ae	value check was looking at the code	2017-05-26 14:49:42 -05:00
Thomas Moore	fb5e0ffe16	Unify M600 and M125 pause features (#6407) ... * Unify M600 and M125 pause features * Cleanup per thinkyhead's comments * Rename filament_change_menu_response to advanced_pause_menu_response * Include HAS_BED_PROBE in QUIET_PROBING * Update gMax example file * is_idle() is out of scope without the braces * Convert FT-i3-2020 to Advance Pause names... * Allow pause even if not printing	2017-05-26 13:01:02 -05:00
Scott Lahteine	b3a97b5013	Patch up LCD level bed menus	2017-05-25 23:53:31 -05:00
Scott Lahteine	78af2b1444	Fix PROBE_MANUALLY via G-code	2017-05-25 23:53:31 -05:00
Scott Lahteine	082da23391	One fewer EOL in M503 output	2017-05-25 23:53:31 -05:00
Scott Lahteine	b15e531464	Fix screen change on character display	2017-05-25 15:29:14 -05:00
Thomas Moore	44e657766e	Add incompatibility error to Sanity Check for MIXING_EXTRUDER and LIN_ADVANCE	2017-05-25 08:06:27 -05:00
Scott Lahteine	735405b2a4	Merge pull request #6848 from thinkyhead/bf_scara_M665 ... Add M665 for SCARA	2017-05-24 20:51:51 -05:00
Scott Lahteine	ffa901f373	Merge pull request #6839 from thinkyhead/bf_day_ending_in_y ... UBL ultralcd.cpp patches	2017-05-24 17:55:44 -05:00
Scott Lahteine	361cbba113	Use M665 to set SCARA angle offsets	2017-05-24 17:49:24 -05:00
Scott Lahteine	5ed63a5724	Apply const in prepare_kinematic_move_to	2017-05-24 17:49:24 -05:00
Scott Lahteine	5cbe0244c5	Fixes for spindle/laser and SCARA probe bounds	2017-05-24 17:49:23 -05:00
Scott Lahteine	1f52c9f5df	Neater Megatronics 3 pins	2017-05-24 17:49:23 -05:00
Scott Lahteine	af81cb4cbb	Patch for M503 output	2017-05-24 17:49:09 -05:00
Scott Lahteine	1d167a6874	Some cleanup, fixes for ultralcd.cpp UBL code ... - Free up 30 bytes of SRAM in UBL LCD code - Fix BUILD_ABS_MESH temperature - Fix UBL indentation in ultralcd.cpp - UBL vars lowercase, "convert to positive" sensibly	2017-05-24 01:10:42 -05:00
Scott Lahteine	f4028fe088	New GCode Parser - Implementation	2017-05-23 14:15:10 -05:00
Scott Lahteine	002a06c507	New GCode Parser - Configuration	2017-05-23 14:15:07 -05:00
Scott Lahteine	ad915b667e	One more mesh_index_to_npos update ... Followup to #6827	2017-05-23 13:02:50 -05:00
Scott Lahteine	2881f0a48d	Fix, extend G42 with P (probe) parameter ... - Also fix handling of SCARA and misuse of `codenum`.	2017-05-23 04:55:42 -05:00
Scott Lahteine	d252d1b6a2	Merge pull request #6831 from thinkyhead/bf_move_g7 ... Move G7 to G42	2017-05-23 03:02:57 -05:00
Brian	82ca6248e2	Move G7 to G42 ... See: #6777	2017-05-22 23:21:35 -05:00
Scott Lahteine	26ffa558a3	Use redraw flag for both types of LCD	2017-05-22 18:34:54 -05:00
Scott Lahteine	3ff7515527	Merge pull request #6817 from cbusillo/patch-1 ... missing enable for M605 for duplication mode	2017-05-22 18:07:11 -05:00
Scott Lahteine	34cfbc90cd	Use new attribute macros in more places	2017-05-22 17:38:58 -05:00
Scott Lahteine	85b967657e	Embed G26/G29 in ubl class, with enhancements	2017-05-22 17:38:58 -05:00
Scott Lahteine	c99bd69889	Apply const float & more	2017-05-22 17:38:36 -05:00
Scott Lahteine	ad5638f78c	Cleanup some fastio code	2017-05-22 17:38:36 -05:00
Scott Lahteine	e271521c39	Single user_canceled function in G26	2017-05-22 17:38:36 -05:00
Scott Lahteine	c2ea22da49	Clean up whitespace	2017-05-22 17:38:36 -05:00
Scott Lahteine	ceb62fc7e1	Fixes #6828: M428 bug	2017-05-22 17:34:03 -05:00
oldmcg	48f7652143	UBL G29 -P3.1 smart fill (#6823) ... * UBL G29 -P3.1 mesh fill with distance-weighted least squares fit. * Back to original -O0 on G29 for now.	2017-05-22 12:33:50 -05:00
Scott Lahteine	850203fb3a	Merge pull request #6816 from thinkyhead/bf_lcd_live_editing ... Constrain LCD status message rendering	2017-05-22 11:15:35 -05:00
Roxy-3D	3129260c44	Misc. Clean Up (#6822) ... * Misc. Clean Up Mostly UBL related clean up. - But fixed a bug in the thermistortables. - Made G26 more responsive to user aborts. - Added sanity checks for older name for UBL_MESH_VALIDATION. - Made G29 P4 able to edit invalidated mesh points - Restore a reasonable Fade Height for UBL when creating new state information - Get UBL's Topology Map to look a little bit better - Make sure the user doesn't see a blank screen when doing Mesh Editing. * Huh??? GitHub Desktop screwed up! * get the planner object in scope * Fix out of scope z_fade_height * Travis timed out... I need a change so I can force a new commit and sync.	2017-05-21 22:09:51 -05:00
cbusillo	3b4116e73b	missing enable for M605 for duplication mode ... I believe gcode_M605 will not be called when using DUAL_NOZZLE_DUPLICATION_MODE without this change.	2017-05-21 13:54:20 -04:00
Scott Lahteine	5e8892d6b5	Show Restore Failsafe item with EEPROM off	2017-05-21 12:52:44 -05:00
Scott Lahteine	76af9ac7c5	tweaks	2017-05-21 12:51:58 -05:00
Scott Lahteine	ba5910ab6c	Constrain LCD status message rendering	2017-05-21 12:35:16 -05:00
MagoKimbra	2c309a8f7c	Fix set_lcd_contrast	2017-05-21 19:01:44 +02:00
Scott Lahteine	22dbb2117c	Merge pull request #6812 from thinkyhead/bf_day_ending_in_y ... Cleanup code, organize & document fastio pin mappings	2017-05-21 11:39:04 -05:00
Roxy-3D	364f8fb613	Update Configuration.h files to better names (#6814) ... Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)	2017-05-21 11:10:22 -05:00
Scott Lahteine	d7fda2fe49	Formatting, const in G33	2017-05-21 10:40:05 -05:00
Scott Lahteine	1519b0e7c1	Split up fastio.h, document pin mappings	2017-05-21 10:33:27 -05:00
Scott Lahteine	49599caade	General cleanup to utf_mapper.h	2017-05-21 10:33:27 -05:00
Scott Lahteine	02f15f6775	UBL-related cleanup, spacing, standards ... Reference: #6804	2017-05-21 10:33:26 -05:00
Scott Lahteine	52e20aeab3	Pins-related cleanup, formatting	2017-05-21 07:18:03 -05:00
Scott Lahteine	ea906e4da7	Merge pull request #6810 from thinkyhead/bf_lcd_live_editing ... Add "live editing" option to LCD menus	2017-05-21 06:11:52 -05:00
Scott Lahteine	11fc9564c9	Add live editing option to LCD menu	2017-05-21 05:29:46 -05:00
Scott Lahteine	8a0a5cfccc	Temp-related cosmetic changes	2017-05-21 04:49:25 -05:00
Scott Lahteine	b29dbbd5e4	Use uint16_t for temps	2017-05-21 04:48:53 -05:00
Scott Lahteine	ebcd1aaf88	Access hotend/bed temperatures as float	2017-05-21 04:46:31 -05:00
Scott Lahteine	6ce2b1ff4a	G33 evolutionary changes	2017-05-20 19:23:39 -05:00
Scott Lahteine	3c061a9f9a	UBL tabs, whitespace, spelling, etc.	2017-05-19 14:16:50 -05:00
Scott Lahteine	75badae2f8	Disable PROBE_MANUALLY for UBL ... Plus some other UBL tweaks.	2017-05-19 07:13:18 -05:00
Scott Lahteine	94a4af1d7f	Merge pull request #6773 from thinkyhead/bf_lcd_patch_e5 ... Patch LCD code for 5th extruder	2017-05-18 15:26:55 -05:00
Brian	01f452c37c	Tweak Azteeg X3 PRO _pins.h so Viki2 will work for those without a case light. ... - add comment explaining that the Panucatt Viki2 wiring diagram uses pin 44	2017-05-18 13:00:13 -04:00
Brian	e09b4ce4a5	Add checking	2017-05-17 19:46:16 -04:00
Brian	13599a73c7	Add G7 gcode command to move between UBL mesh points ... - can be augmented in the future to enable for other leveling systems Quite simple, but did not want to modify `G1` as the additional checking would slow it down. Tested & working.	2017-05-17 19:05:36 -04:00
Brian	43c24f0027	Fix recent regressions, &c. ... - fix broken `M421` due to less-than-careful optimization - add HOME_AFTER_DEACTIVATE define to advanced config so not everyone has to rehome after steppers are deactivated - misc. cleanups (remove unused label, unused variables)	2017-05-17 17:21:46 -04:00
Scott Lahteine	3843a5151a	Patch LCD code for 5th extruder, EEPROM reset	2017-05-17 15:33:51 -05:00
Scott Lahteine	6c064bb7d6	Some probe_pt error-handling	2017-05-17 15:33:51 -05:00
Brian	3370329751	Fix broken EEPROM save/load	2017-05-17 12:41:27 -04:00
Scott Lahteine	f0fe26c411	Ensure Arduino.h and configs are included for serial.cpp	2017-05-17 05:07:35 -05:00
Scott Lahteine	ffb5353294	Merge pull request #6738 from thinkyhead/bf_config_crc_rebase ... Implement CRC16, develop mesh allocation table	2017-05-17 04:44:00 -05:00
Scott Lahteine	e806e6419a	Merge pull request #6768 from thinkyhead/rc_spindle_m3_m5 ... Spindle / Laser support	2017-05-17 04:39:32 -05:00
Scott Lahteine	d6f49c6626	Merge pull request #6752 from jdelahayes/bugfix-1.1.x ... Update french language	2017-05-17 04:32:28 -05:00
Scott Lahteine	55a87da036	SPINDLE/LASER implementation	2017-05-17 04:26:15 -05:00
Scott Lahteine	ffe0e2d19a	SPINDLE/LASER pins changes	2017-05-17 04:23:06 -05:00
Scott Lahteine	99c4900a98	SPINDLE/LASER config changes	2017-05-17 04:23:06 -05:00
Scott Lahteine	a3abfeac47	Mark strings needing translation	2017-05-17 03:49:33 -05:00
Scott Lahteine	7f4e4b1212	UBL name/state methods	2017-05-17 03:49:32 -05:00
Brian	7852369987	Implement CRC16, develop mesh allocation table ... - Add crc16 utility function - Implement CRC16 for config store, remove old checksum, increment layout version - Move UBL mesh store/load to MarlinSettings; increment UBL_VERSION - Begin to lay out MAT structure, prototype functions, etc. - Rename ubl.state.eeprom_storage_slot to .storage_slot - Misc. optimization - Cleanup/standardize/improve some messages This is a work in progress!	2017-05-17 03:49:19 -05:00
Scott Lahteine	00d358d92d	Fix a PROBE_MANUALLY bug in ultralcd.cpp	2017-05-17 03:49:19 -05:00
fixoid	c2321b1cdd	Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER	2017-05-16 19:25:17 -05:00
Scott Lahteine	238fb53617	Patch home_all_axes to ignore G28 XYZ parameters	2017-05-16 16:18:38 -05:00
Scott Lahteine	6b6630e11b	Clean up trailing whitespace and tabs	2017-05-16 16:06:18 -05:00
Roxy-3D	d30e478f97	Fix incorrectly optimized find_closest_mesh_point_of_type() function (#6761)	2017-05-16 15:24:24 -05:00
oldmcg	5a9e52a3e0	Use COPY_XYZE macro to copy exactly 4 elements (#6758) ... Fix undefined DELTA_PROBEABLE_RADIUS for UBL_DELTA	2017-05-16 11:47:51 -05:00
Roxy-3D	8606644343	M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary (#6757) ... * Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined. * Check if the specified G29 command requires homing	2017-05-16 11:23:50 -05:00
Tannoo	0cd398c25d	UBL Menu Updates (#6751) ... Things should be pretty stable for a while. But it wouldn't surprise me if the Delta people have a need for a few special commands.	2017-05-16 08:45:31 -05:00
Johann Delahayes	a5737cba7c	Update french language	2017-05-16 12:27:42 +02:00
Scott Lahteine	0fef9a2983	Remove "ubl." prefix from calls within ubl method	2017-05-16 01:19:45 -05:00
Scott Lahteine	14a4257c7b	UBL tabs, whitespace, spelling, etc.	2017-05-16 01:19:45 -05:00
Scott Lahteine	56e2e331ed	UBL G29: replace 'O' with 'T' ... Since we already used 'T' for `G29` Topology Report in the past, and since 'T' is available…	2017-05-16 01:18:41 -05:00
Scott Lahteine	091f94a6bf	Fix up M421 and some comments	2017-05-16 01:14:03 -05:00
Scott Lahteine	4ec4ecff1a	Reduce find_closest_mesh_point_of_type a little	2017-05-16 01:14:03 -05:00
Scott Lahteine	f1a1c6873e	Patch lcd_implementation_status_screen compiler warning	2017-05-16 00:59:50 -05:00
moebyusDev	2266c0780d	fixed spanish lang ... It was missing MSG_FILAMENT_CHANGE_HEAT_2 and MSG_FILAMENT_CHANGE_HEATING_2	2017-05-16 00:35:36 -05:00
oldmcg	b213a45efb	UBL_DELTA post merge cleanup (#6705) ... * UBL_DELTA post merge cleanup: fix fade_height, lost during some previous merge fix float cx,cy which are not const move repeated z_cxcy calc line inside loop style fixes and comment fixes/alignment * Update ubl_motion.cpp remove unnecessary parentheses * Update Conditionals_post.h Change name of define to more accurate meaning: UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN which is not and should not be the default for cartesians with UBL.	2017-05-16 00:30:29 -05:00
Roxy-3D	6f86c46fa6	Fix typo that caused scope issues for DELTA (#6750)	2017-05-15 23:13:45 -05:00
Roxy-3D	1fbcbc05f6	UBL no longer flout's the sacred GCode standard (#6745) ... Also clean up ubl_motion.cpp debug info and fix declaration of cx & cy	2017-05-15 16:25:01 -05:00
Scott Lahteine	c262ea92e0	Merge pull request #6733 from abusca/Euskera ... Updated Basque translation	2017-05-15 02:30:11 -05:00
Scott Lahteine	267f77b18b	More constraint on axis_unhomed_error	2017-05-14 16:03:02 -05:00
Aaron Busca	645096b87a	Updated Basque translation ... Updated Basque translation with new strings.	2017-05-14 18:29:50 +02:00
Roxy-3D	40d95a4e23	Update the gMax files to display better with Proportional Fonts (#6727) ... Update the gMax files to display better with Proportional Fonts	2017-05-13 16:33:04 -05:00
Roxy-3D	c06af63f87	G26's default behaviour ought to be the entire mesh (#6726) ... Adding the capability to specify ahead of time how much of the validation pattern to print made it so by default G26 only did one circle and no connecting lines. It is more natural for the unsophisticated user to just do the entire mesh (bed). We default the repetition count to GRID_MAX_POINTS+1 to insure we get every last one of them!	2017-05-13 15:53:44 -05:00
Roxy-3D	15040821e0	Setup FolgerTech-i3-2020 files better for the user (#6724) ... UltiPanel was enabled, but technically, it is a REPRAP_DISCOUNT_SMART_CONTROLLER Either configuration works on the machine. But we want it 'Right'. Setup the Proportional Font spacing so columns line up nicer on PronterFace and Repetier Host.	2017-05-13 15:14:03 -05:00
Scott Lahteine	67c9b1e332	Update M665 comment, fix M665 code_value code.	2017-05-13 05:11:29 -05:00
Scott Lahteine	37399e3cb5	Fix prepare_move_to_destination_cartesian for UBL	2017-05-13 04:13:19 -05:00
Scott Lahteine	a7fb55ea6d	Use GRID_MAX_POINTS. Some formatting	2017-05-12 06:57:19 -05:00
Scott Lahteine	e51b5774db	Merge pull request #6699 from mtowara/patch-1 ... Bugfix PRINTER_EVENT_LEDS	2017-05-12 05:58:25 -05:00
Scott Lahteine	056350d9bf	Merge pull request #6656 from FHeilmann/fix_fwretract_pos_z_move ... Fix FWRetract with positive z-moves during retracted state	2017-05-12 05:56:08 -05:00
Scott Lahteine	0e582bcfb7	Fix #6691 - redundant line in M665	2017-05-12 05:17:38 -05:00
Markus Towara	68ae7c8d7a	Bugfix PRINTER_EVENT_LEDS ... Extra closing curly bracket terminates while loop early if PRINTER_EVENT_LEDS defined	2017-05-12 12:13:23 +02:00
Scott Lahteine	ba29da56e0	Add disclaimer for verboten parameters	2017-05-12 02:34:53 -05:00
Scott Lahteine	0696dda470	Cleanups to UBL_DELTA	2017-05-12 02:34:53 -05:00
Scott Lahteine	cbfca29522	M421 tweaks, just to use const	2017-05-12 01:32:34 -05:00
Scott Lahteine	233f824dd6	Define GRID_MAX_POINTS	2017-05-12 01:32:34 -05:00
Scott Lahteine	b17e2d3dcd	Apply const in Marlin_main.cpp	2017-05-12 01:32:33 -05:00
Scott Lahteine	92fbea2906	Add some GCodes to the header of Marlin_main.cpp	2017-05-12 01:32:33 -05:00
Scott Lahteine	94e90ca26c	Tweak M80/M81 descriptions	2017-05-12 01:32:33 -05:00
Scott Lahteine	ee50dfaaf3	Adjust G26 arguments	2017-05-12 01:32:33 -05:00
Scott Lahteine	b0ba5cae73	Fix a spelling boo	2017-05-12 01:32:33 -05:00
oldmcg	91841d75c9	UBL_DELTA (#6695) ... UBL on Delta's.... Should be close! Should not affect any Cartesian printer.	2017-05-11 22:33:47 -05:00
bgort	445003dbb8	Merge pull request #6694 from bgort/g29p2b ... UBL: Minor improvement to G29 P2	2017-05-11 20:44:43 -04:00
Brian	5a5dba6fc8	UBL: Minor improvement to G29 P2 ... - allow H code value to override probing height - minor cleanups	2017-05-11 18:54:34 -04:00
Brian	ae676490c9	M421: Add 'adjust closest point' capability ... - Split M421 into separate versions for bilinear and ubl - Fix minor issue in G26	2017-05-11 12:10:38 -04:00
Scott Lahteine	9a688d1456	Merge pull request #6682 from thinkyhead/bf_M80_s_arg ... "M80 S" to report the state of the PSU pin	2017-05-10 20:29:01 -05:00
Roxy-3D	b63e82f309	M421 Mesh Point Offset and misc. UBL clean up (#6685) ... * M421 Mesh Point Offset and misc. UBL clean up Allow M421 to accept an offset as well as absolute value for a specified mesh point. And misc. UBL clean up to reduce redundent code. * Better error checking for M421 * Fix M421 Y index bug I just noticed.... We've had a Y index bug for who knows how long?	2017-05-10 18:54:10 -05:00
Pablo Ventura	539e0c2f31	"M80 S" to report the state of the PSU pin	2017-05-10 17:58:58 -05:00
bgort	df42428281	Merge pull request #6665 from bgort/font ... Add proportional font adjustment ratio	2017-05-10 17:30:51 -04:00
Brian	2604742191	Add proportional font adjustment ratio ... - update example configs	2017-05-10 17:19:03 -04:00
bgort	b3407a371b	Merge pull request #6676 from bgort/g26zhop ... G26: Add 0.5mm Z-bump between circles to minimize pattern scraping	2017-05-10 17:12:05 -04:00
bgort	c33d99c5b2	Merge pull request #6680 from bgort/g26repeat ... G26: Add 'Repeat' Option	2017-05-10 17:11:34 -04:00
Bob-the-Kuhn	7325035aac	Merge pull request #6637 from Tannoo/UBL_Menu_System_1.1 ... UBL Menu System 1.1	2017-05-10 15:54:48 -05:00
Brian	f7a201b0d0	G26: Add 'Repeat' Option ... - Allows for specifying number of points to print/validate, using 'R' code like with G29 P4 Rx - Moved the code for Random to 'M' so we could be consistent with G29 P4 - G26 instructions indenting/cleanup	2017-05-10 16:52:08 -04:00
Brian	9c5957fc77	G26: Add 0.5mm Z-bump between circles to minimize pattern scraping	2017-05-10 16:11:59 -04:00
Brian	4da14b14f4	UBL Cleanup/Bugfix ... - Fix bug in ubl_line_to_destination - Improve/fix output of some ubl.h functions	2017-05-10 13:56:17 -04:00
Tannoo	66db6c3acc	UBL Menu System 1.1 ... /** * UBL System submenu * * Prepare * - Unified Bed Leveling * - Activate UBL * - Deactivate UBL * - Mesh Storage * Memory Slot: * Load Bed Mesh * Save Bed Mesh * - Output Map * Map Type: * Output Bed Mesh Host / Output Bed Mesh CSV * - UBL Tools * - Build Mesh * Build PLA Mesh * Build ABS Mesh * - Build Custom Mesh * Hotend Temp: * Bed Temp: * Build Custom Mesh * Info Screen * - Build Cold Mesh * - Fill-in Mesh * Fill-in Mesh * Smart Fill-in * Manual Fill-in * Info Screen * Continue Bed Mesh * Invalidate All * Invalidate Closest * - Validate Mesh * PLA Mesh Validation * ABS Mesh Validation * - Custom Mesh Validation * Hotend Temp: * Bed Temp: * Validate Mesh * Info Screen * - Edit Mesh * Fine Tune All * Fine Tune Closest * - Adjust Mesh Height * Height Amount: * Adjust Mesh Height * Info Screen * - Mesh Leveling * 3-Point Mesh Leveling * - Grid Mesh Leveling * Side points: * Level Mesh * Info Screen * - Output UBL Info */	2017-05-10 12:14:43 -05:00
Brian	3b0127cf8e	Fix compiler complaint related to M100	2017-05-09 21:45:44 -04:00
Scott Lahteine	11104f177b	Apply const in BABYSTEPPING	2017-05-09 12:37:23 -05:00
Scott Lahteine	081bf1f879	Patch #else / #endif comments	2017-05-09 12:37:23 -05:00
Scott Lahteine	a9487c9443	Reduce redundancy in BLTOUCH conditionals	2017-05-09 11:52:24 -05:00
Scott Lahteine	8d961b51cc	Eliminate M100 compiler warnings?	2017-05-09 11:32:15 -05:00
bgort	efb9ce24d9	Merge pull request #6645 from tcm0116/bltouch_config ... Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch	2017-05-09 09:49:16 -04:00
bgort	e2f07917ab	Merge pull request #6644 from tcm0116/bltouch_menu ... Move BLTouch LCD menu from Main to Main/Control	2017-05-09 09:49:02 -04:00
Florian Heilmann	fe96376a73	Fix FWRetract with positive z-moves during retracted state	2017-05-09 13:54:57 +02:00
Scott Lahteine	47cae2929f	Patch platformio.ini to fix build error in DevIoT ... For compatibility with DevIoT, until that can be solved.	2017-05-08 20:27:14 -05:00
Scott Lahteine	911a87e006	Disable SCARA feedrate scaling by default	2017-05-08 14:41:03 -05:00
Scott Lahteine	71396f77d3	Cleanups following recent commits	2017-05-08 14:23:01 -05:00
Scott Lahteine	dca48f0e63	Move platformio.ini back to Marlin folder - it works there	2017-05-08 14:23:01 -05:00
Scott Lahteine	a6dafb058e	Small reduction in error code size	2017-05-08 13:58:09 -05:00
Scott Lahteine	a1e04942a2	Cleanup to software PWM variables	2017-05-08 13:51:45 -05:00
Thomas Moore	a20d0794e6	Automatically define Z_MIN_PROBE_ENDSTOP_INVERTING for BLTouch	2017-05-08 16:28:44 +00:00
Thomas Moore	3279337f47	Move BLTouch LCD menu from Main to Main/Control	2017-05-08 15:21:01 +00:00
Brian	6cb0fa4128	Cleanup previous implementation of new quiet probing ... Saves a few lines of code.	2017-05-08 08:13:46 -04:00
bgort	4b7f8ad9c6	Merge pull request #6610 from bgort/pio-improvements2 ... PlatformIO-related changes	2017-05-08 07:52:42 -04:00
Scott Lahteine	56ca47ab9d	Patch configuration temp units	2017-05-07 21:32:01 -05:00
Scott Lahteine	421dd62800	Adjust spacing of "spaces"	2017-05-07 21:28:54 -05:00
Scott Lahteine	26dba44cd3	Patch redundant lcd settings	2017-05-07 21:28:54 -05:00
Scott Lahteine	34b5041576	Spacing adjustment, ubl_G29	2017-05-07 21:28:54 -05:00
Scott Lahteine	1c4ed8b106	Note 5 extruders in config comments	2017-05-07 21:28:54 -05:00
Scott Lahteine	6e4a5cc8c6	Patch missing const in temp_abs	2017-05-07 21:13:44 -05:00
bgort	d35e2fda10	Merge pull request #6622 from bgort/silentprobing ... Improve BLTOUCH_HEATERS_OFF functionality	2017-05-07 21:33:44 -04:00
Scott Lahteine	6ed52fb765	Adjust spacing in LSF	2017-05-07 19:11:52 -05:00
Roxy-3D	110afff415	More misc UBL fixes and update gMax examples (#6632) ... I think I forgot to Sync before I committed last time. Some UBL changes did not stick. Also, update the gMax configuaration.h file so other than unique numbers and settings, it exactly matches the default configuration.h file.	2017-05-07 19:02:24 -05:00
Roxy-3D	d92fa40c62	misc. UBL fixes (#6631) ... * Restore LSF functionality Some of the typo's persisted... Hopefully this gets them all fixed. * Restore user's expectations of how G28 should behave * Allow Nozzle size control with ornery host programs	2017-05-07 18:23:48 -05:00
Brian	faa270071d	Improve BLTOUCH_HEATERS_OFF functionality ... - rename to PROBING_HEATERS_OFF - move heater pausing functionality into thermalManager - add variables, pause(), ispaused(), other functions - add fan pausing functionality -> PROBING_FANS_OFF - add probing_pause() wrapper - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit - example configs	2017-05-07 16:22:08 -04:00
lrpirlet	d66e9efac5	G29 P1 stops reporting Invalid location with this patch	2017-05-07 15:07:26 +02:00
Scott Lahteine	ce507deb9f	Support temperature units in M503	2017-05-06 20:24:51 -05:00
bgort	a59066bca9	Various improvements - mostly UBL-related (#6607) ... UBL Clean up.	2017-05-06 18:59:16 -05:00
Brian	0446dd3ad8	PlatformIO-related changes ... - move platformio.ini out of source directory to be more consistent with 'normal' PlatformIO usage - facilitates IDE integration - add related .gitignores	2017-05-06 06:22:10 -04:00
Scott Lahteine	77769e284f	Edit configuration comments	2017-05-05 13:32:31 -05:00
Scott Lahteine	6876e79d42	Tweak command index increment	2017-05-05 13:32:31 -05:00
Scott Lahteine	7fcb5c1424	Minor fix in K8200 readme	2017-05-05 11:25:11 -05:00
Max Matveev	267f3a03d9	Fixed USE_CONTROLLER_FAN #define usage	2017-05-04 23:38:29 +02:00
bgort	ae7c602031	fix error in M105 output -- use SERIAL_PROTOCOL for ints instead of SERIAL_PROTOCOL_F (#6584) ... also removed wayward 'address of' ampersand in setTargetHotend and setTargetBed parameters	2017-05-04 16:09:45 -05:00
Scott Lahteine	3cd9af2409	bugfix-1.1.x ReadMe, Version, helper scripts	2017-05-04 07:17:10 -05:00
Florian Heilmann	15268770f5	Fix broken fwretract recovery extruder feedrate ... When both lowering and recovery are performed using the same "prepare_move_to_destination()" the extruder recovery feedrate ends up being ignored and, instead, is only capped by either the maximum e-speed or the time it takes to perform the z-lowering. Performing the two moves separately from each other ensures a correct recovery feedrate.	2017-05-04 11:34:28 +02:00
Scott Lahteine	58210c3a19	Merge pull request #6568 from thinkyhead/rc_bilinear_extension ... Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling	2017-05-04 00:46:05 -05:00
Scott Lahteine	da08e11acd	Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling	2017-05-04 00:19:07 -05:00
Scott Lahteine	6834e36871	Merge pull request #6567 from thinkyhead/rc_sdcard_stop ... Shutdown heaters, autotemp on SD Cancel	2017-05-03 23:54:29 -05:00
Scott Lahteine	399efd66ed	Click to resume	2017-05-03 22:26:06 -05:00
Scott Lahteine	1196e3ca59	SDCard print completion can use "M0"	2017-05-03 22:24:03 -05:00
Scott Lahteine	6854f08d22	Shut down autotemp in disable_all_heaters	2017-05-03 20:54:26 -05:00
Thomas Moore	acec237092	Shutdown heaters and fan after canceling a print from the SD card	2017-05-03 20:43:09 -05:00
Scott Lahteine	11b6a3cbb6	Fix regression in least_squares_fit.cpp	2017-05-03 19:21:44 -05:00
Scott Lahteine	e1b85ff67b	Merge pull request #6559 from thinkyhead/rc_more_optimal ... Compact smart_fill_mesh slightly	2017-05-03 19:07:36 -05:00
Scott Lahteine	9890141f7b	M100 tweak	2017-05-03 17:28:09 -05:00
Scott Lahteine	2658cc707a	Treat temperature as integer, when possible	2017-05-03 17:27:25 -05:00
Scott Lahteine	1b2c7ec20a	Make G26 compatible with inches and thermal unit modes	2017-05-03 17:12:48 -05:00
Scott Lahteine	241bdffe65	Dress up Bilinear Leveling code	2017-05-03 17:12:35 -05:00
Scott Lahteine	67ecf06cc4	Patch issue in gcode_M900 ... Noted in #6550	2017-05-03 15:26:00 -05:00
Scott Lahteine	de5e485ed7	Explicit upward angle solution	2017-05-03 01:19:44 -05:00
Scott Lahteine	ecdf68735f	Compact smart_fill_mesh slightly	2017-05-03 01:06:58 -05:00
Scott Lahteine	628391304f	Merge pull request #6552 from thinkyhead/rc_more_ubl_cleanup ... Further cleanup of UBL	2017-05-02 22:46:04 -05:00
Scott Lahteine	902fe76db9	Merge pull request #6556 from thinkyhead/rc_use_controller_fan ... Implement USE_CONTROLLER_FAN as a feature	2017-05-02 22:43:26 -05:00
Scott Lahteine	7ba7474a73	Drop extra parens from address-of operator	2017-05-02 22:22:23 -05:00
Scott Lahteine	0bf5add075	Use UBL_MESH_(MIN|MAX)_[XY] for G29 move limits	2017-05-02 22:22:23 -05:00
Scott Lahteine	b8ba3b7647	Use 'sq' macro where possible	2017-05-02 22:22:23 -05:00
Scott Lahteine	66eba3346b	Remove G29 lcd control debugging	2017-05-02 22:22:23 -05:00
Scott Lahteine	3517154135	Reduce code size, fix bug in smart_fill_mesh	2017-05-02 22:22:23 -05:00
Scott Lahteine	c4e34adcf1	Apply formatting, coding standards to UBL	2017-05-02 22:22:23 -05:00
Scott Lahteine	f4239e62b1	Merge pull request #6557 from thinkyhead/rc_hotend_status_item ... Keep refreshing LCD if hotend status is on-screen	2017-05-02 22:04:21 -05:00
Scott Lahteine	fc857c5b78	Merge pull request #6549 from thinkyhead/rc_bltouch_refix ... Fix BLTOUCH_HEATERS_OFF bug	2017-05-02 21:53:09 -05:00
Thomas Moore	b39f634252	Continuously update LCD when hotend status is displayed in Filament Change screens	2017-05-02 21:49:40 -05:00
Scott Lahteine	2c13922c46	Implement USE_CONTROLLER_FAN as a feature	2017-05-02 20:18:52 -05:00
Scott Lahteine	492bc536bf	Modify debug methods to take PSTR	2017-05-02 17:53:40 -05:00
Bob-the-Kuhn	e5a27d9f36	G29 P2 & P4 bug fixes & improvements	2017-05-02 17:53:40 -05:00
Scott Lahteine	b93be716cf	Remove trailing whitespace	2017-05-02 17:53:40 -05:00
Scott Lahteine	76eca9732d	Fix mis-named language string define in Dutch	2017-05-02 16:08:09 -05:00
Scott Lahteine	806f670092	Merge pull request #6511 from Bob-the-Kuhn/UBL--G26-minor-improvements ... UBL: G26 minor improvements	2017-05-02 16:06:22 -05:00
Scott Lahteine	0803c9d997	Merge pull request #6533 from thinkyhead/rc_autocal_patches ... General cleanup of G33	2017-05-02 16:01:02 -05:00
Brian	ff5fed137f	Fix BLTOUCH_HEATERS_OFF bug	2017-05-02 15:53:52 -05:00
Scott Lahteine	ca1dd739a3	Organize ubl.h defines by the files they serve	2017-05-02 15:47:06 -05:00
Scott Lahteine	0449f69179	Cleanup patch to recent merge	2017-05-02 15:47:06 -05:00
LVD-AC	da2abad636	Various cleanups of G33 ... - update comment section - redefined P5 grid - minor clean to probe radius routine - updated EEPROM version to V37 according remark in #6517	2017-05-02 15:47:06 -05:00
Bob-the-Kuhn	7ce613db0a	Fix Conditionals test for endstop plug used by Z2 or probe.	2017-05-02 15:41:47 -05:00
Scott Lahteine	ef750ae86b	Towards supporting Z2 in Endstops::report_state	2017-05-02 15:39:32 -05:00
Scott Lahteine	c03c623951	Sanity-check Z2 endstop assigned to a nonexistent pin.	2017-05-02 15:39:00 -05:00
Scott Lahteine	70f31b6c76	Throw an error if no E stepper is free for X2, Y2, Z2	2017-05-02 15:13:47 -05:00
Scott Lahteine	ac69eca586	Merge pull request #6538 from bgort/ubl_gridlbls ... Fix, cleanup, prettify `G29 O` output	2017-05-02 14:09:18 -05:00
Scott Lahteine	99b11db1a1	Merge pull request #6537 from thinkyhead/rc_cleanup_sunday ... Various leveling-related patches	2017-05-02 00:59:59 -05:00
Roxy-3D	41e63bbb7c	Fix Horizontal and Vertical UBL optimization bug. (#6540) ... * Fix Horizontal and Vertical optimization bug. And drastically reduce the debug code foot print.... * Yeah Baby! The debug print is going A - OK !	2017-05-01 23:52:33 -05:00
Scott Lahteine	e79b335367	Patches for leveling reactivation in G28 / M48	2017-05-01 17:38:57 -05:00
Brian	92e22c3bf2	Fix, cleanup, prettify G29 O output	2017-05-01 18:19:57 -04:00
Scott Lahteine	7d5cd7e0d7	Tweak set_bed_leveling_enabled	2017-05-01 16:46:52 -05:00
Scott Lahteine	ed81e9b3d3	Adjust leveling conditionals	2017-05-01 16:46:48 -05:00
Scott Lahteine	a64e5659ce	Clean up G26 external references, private vars	2017-05-01 15:17:52 -05:00
Scott Lahteine	2887c20788	Add a function to home all axes (i.e., gcode_G28)	2017-05-01 15:03:37 -05:00
Scott Lahteine	8f895d5e01	Merge pull request #6530 from thinkyhead/rc_cleanups_2 ... Fixes for DUAL_NOZZLE_DUPLICATION_MODE	2017-05-01 12:34:11 -05:00
Scott Lahteine	8002672938	Fixes for DUAL_NOZZLE_DUPLICATION_MODE	2017-05-01 12:20:25 -05:00
Scott Lahteine	f69acde966	Merge pull request #6528 from MarlinFirmware/revert-6416-negative-mesh-fix ... Revert "Fix for Meshpositions if printer has negative endstop positions"	2017-05-01 11:51:13 -05:00
Scott Lahteine	4803a4322e	Revert "Fix for Meshpositions if printer has negative endstop positions"	2017-05-01 11:25:07 -05:00
Scott Lahteine	4f74c416a4	Patch for BLTOUCH_HEATERS_OFF	2017-05-01 11:13:40 -05:00
Scott Lahteine	1823a6ea29	Patch for missing DELTA_HEIGHT	2017-05-01 11:05:35 -05:00
Scott Lahteine	d814e468d2	Fix set_heaters_for_bltouch and usage ... - Only call `set_heaters_for_bltouch` when actually deploying/stowing - Clear `next_emi_protection` when re-enabling heaters	2017-05-01 02:27:52 -05:00
Brian	4e1448e75a	Various fixes for compiler warnings ... add BLTouch-related messages in english and (rusty) french; add missing endstops.h in ultralcd.cpp; fix misc. compiler warnings; fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct	2017-05-01 02:12:40 -05:00
Scott Lahteine	fc9919b749	Merge pull request #6515 from thinkyhead/rc_cleanup_sunday ... Some minor cleanups to code formatting	2017-04-30 22:58:16 -05:00
Scott Lahteine	c12bc51a59	cardreader.cpp spacing tweak	2017-04-30 22:27:47 -05:00
Scott Lahteine	46b714a52f	Cleanup spacing in pinsDebug.h	2017-04-30 22:27:26 -05:00
Scott Lahteine	88141ca717	Remove things that aren't pins from pinsDebug_list.h	2017-04-30 22:24:51 -05:00
Scott Lahteine	ff35b11d08	Resolve compiler complaint about memset volatile *	2017-04-30 22:24:03 -05:00
Scott Lahteine	0b421e97c9	Rename some (unused) OMCA pins	2017-04-30 22:16:44 -05:00
Scott Lahteine	c2c9f01c8e	Patch newly-introduced bug in IS_Z2_OR_PROBE	2017-04-30 20:17:10 -05:00
Scott Lahteine	819df5e06d	Cleanups to pins debugging	2017-04-30 20:17:10 -05:00
Scott Lahteine	42824b0e1f	Use new serial spacing function to save PROGMEM	2017-04-30 20:14:42 -05:00
Scott Lahteine	cd72901fb7	Cleanups to UBL code	2017-04-30 20:14:42 -05:00
Bob-the-Kuhn	ce87c7803e	implement G26 changes per review	2017-04-30 19:05:25 -05:00
jaysonkelly	769817ce5e	Need to define this for Rigidboard V2 ... Motor current defaults need to be defined for Rigidboard	2017-04-30 19:04:27 -05:00
Scott Lahteine	39c6c5621b	Merge pull request #6416 from SkyNet3D/negative-mesh-fix ... Fix for Meshpositions if printer has negative endstop positions	2017-04-30 17:38:41 -05:00
Scott Lahteine	671a44b8aa	Merge pull request #6410 from teemuatlut/LVD-Delta ... Delta auto-calibration updates	2017-04-30 16:39:51 -05:00
Scott Lahteine	5d5c9a040a	Merge pull request #6509 from thinkyhead/rc_config_patches ... Configuration cleanup	2017-04-30 16:10:27 -05:00
Scott Lahteine	d480b6f75a	Enable E1 stepper for DUAL_NOZZLE_DUPLICATION_MODE	2017-04-30 16:01:01 -05:00
Bob-the-Kuhn	dcde202157	Add startup notice & update host temperatures while waiting ... Right now G26 doesn't send a notice to the host that it's running. It's not until the heaters are at temperature that you know for sure if it's running or not. Added host temperature prints so that someone watching the host interface will see the temperatures change during the warm up period. Updates are sent every 5 seconds.	2017-04-30 15:51:58 -05:00
Scott Lahteine	54751e8557	Put DISTINCT_E_FACTORS adjacent to the affected settings	2017-04-30 15:30:31 -05:00
Scott Lahteine	0dbe4b3e54	Edit configurations to reduce verbosity, arrange logically	2017-04-30 15:30:31 -05:00
Scott Lahteine	0750933bc6	Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop ... Endstop not enabled if pin is zero	2017-04-30 15:09:36 -05:00
bgort	5ace3699b1	Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values (#6507)	2017-04-30 14:59:34 -05:00
Scott Lahteine	d7d4378481	Remove inaccurate version description	2017-04-30 14:57:19 -05:00
Scott Lahteine	f169c04604	Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday ... Various cleanups for recent merges	2017-04-30 14:56:48 -05:00
Scott Lahteine	6d63255ddc	Merge pull request #6508 from bgort/pio_improvements ... PlatformIO-related improvement	2017-04-30 14:53:22 -05:00
LVD-AC	cafc48dff8	little oops	2017-04-30 22:17:49 +03:00
Brian	627730948d	Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically. ... Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.	2017-04-30 15:13:51 -04:00
bgort	5974d8e168	change G26 default nozzle size to 0.4, consistent with instructions (#6506)	2017-04-30 13:23:46 -05:00
LVD-AC	471a321624	leaner code for probe routine	2017-04-30 19:15:16 +03:00
bgort	3c0d5ba0a1	allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505)	2017-04-30 10:22:31 -05:00
Roxy-3D	2509587b5a	Correct over optimization of pre-initialized variables (#6500) ... * Correct over optimization of pre-initialized variables NEAR_ZERO() works most of the time... But it leaves corner cases uncovered. We need to explicitly check if these variables are +/- infinity. * Correct over optimization of pre-initialized variables	2017-04-29 22:01:29 -05:00
LVD-AC	585c00a728	Proposed changes ... This is what I did yesterday: - basicly gave the tests more comprehensive names; put all the declarations at the top; got rid of the magic negative C-value (renamed to P + A, O, T) - "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 : -1)) * delta_calibration_radius" compiles wrong is zig_zag statement is without brackets - DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value to normalize will not compile otherwise) -Wrote 3 dummies to keep EEPROM lenght the same -Reset the configs to the 'original' with autocal + menu disabled (but can be enabled of course)	2017-04-29 18:53:14 +03:00
Scott Lahteine	29fa241617	Initial patches to G33	2017-04-29 15:29:49 +03:00
Scott Lahteine	12ce051b55	Add a function to output spaces to serial	2017-04-29 15:29:49 +03:00
Scott Lahteine	42f4c53254	Starting on G33 rewrite	2017-04-29 15:29:49 +03:00
Scott Lahteine	baf3b91460	DELTA_TOWER_ANGLE_TRIM only needs AB	2017-04-29 15:29:49 +03:00
emartinez167	27cd165adf	Last three Spanish language strings ... Updates as per @thinkyhead request.	2017-04-29 11:33:30 +08:00
Scott Lahteine	2cc9774f34	Apply bltouch_menu ... As proffered in #6252	2017-04-28 18:43:03 -05:00
Scott Lahteine	1a111180de	Clean up set_heaters_for_bltouch	2017-04-28 18:32:39 -05:00
Scott Lahteine	7db805930a	Cleanup configurations	2017-04-28 18:32:39 -05:00
Scott Lahteine	8bf3a3fcdb	Remove inaccurate comments from ubl.h	2017-04-28 18:32:38 -05:00
Scott Lahteine	47557d5a19	Fix up formatting in ubl.h	2017-04-28 18:32:38 -05:00
Scott Lahteine	0a8e09c723	Clean up excess whitespace, comment formatting	2017-04-28 18:32:38 -05:00
Scott Lahteine	a35c681453	Clean up least_squares_fit	2017-04-28 17:33:28 -05:00
Bob-the-Kuhn	40089249c3	add PIN_EXISTS to HAS_xyz_MIN macro	2017-04-28 16:47:59 -05:00
Scott Lahteine	8020069371	Apply coding standards for indentation	2017-04-28 15:43:06 -05:00
Scott Lahteine	dabca83742	Merge pull request #6437 from Kaibob2/patch-1 ... Update language_de.h	2017-04-28 14:47:47 -05:00
Kai	3d0a4c4ea9	Update language_de.h	2017-04-28 21:09:10 +02:00
Silvio	6bf1d50188	Added missing translations (#6458)	2017-04-28 13:49:16 -05:00
Mehmet Sutas	404f767d44	Update language_tr.h (#6463)	2017-04-28 13:48:31 -05:00
Petr Zahradnik	5e701524f8	Update language_cz.h for new translations (#6465) ... * Update language_cz.h for new translations * Correction translate * Revert correction back to hotend	2017-04-28 13:47:43 -05:00
gege2b	0a92ce7a98	Completed french translation (#6475)	2017-04-28 13:46:09 -05:00
Ernesto Martinez	ff4fb42e7d	Add new strings as per recent changes in RCBugFix (#6482) ... Adding missing strings to Spanish language, as per changes recently done to the RCBugFix branch.	2017-04-28 13:45:22 -05:00
paulusjacobus	67d1fc5556	Update language_nl.h (#6478) ... updated the RCbugfix release with additional Dutch translations	2017-04-28 13:42:39 -05:00
benlye	8c6b4537a6	Fix issue in itostr4sign with numbers <100 (#6487) ... The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.	2017-04-28 13:35:11 -05:00
LVD-AC	4ea8d0f89b	Solved "The Travis CI build failed "	2017-04-28 19:55:21 +03:00
LVD-AC	ed6b361e27	cleanup ready to squash	2017-04-28 18:09:18 +03:00
LVD-AC	7a6a1ef583	M666 normalize positive values to <=0 ... M666 + tower radians absolute value	2017-04-28 18:05:24 +03:00
Roxy-3D	4075b95519	Allow BL-Touch users to control heaters during probe event (#6485) ... The Configuration.h file entries for BL-Touch have been updated to: ```cpp //#define BLTOUCH //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event ```	2017-04-28 09:19:55 -05:00
Roxy-3D	6e8ecb908a	Shut down heaters during BL-Touch probe event ... The electro-magnetic interference from the bed and nozzle are affecting the BL-Touch repeatability for some users. This problem can be helped by shutting down the heaters during the actual probe event and then quickly turning them back on. Because this code is messing with the heaters, it is written in a paranoid manner. It only turns the heaters back on if everything is EXACTLY as it expects things to be. The BL-Touch probe must have been put into a deployed state less than 20 seconds prior, or the stow() function will NOT turn the heaters on. This code has been tested and works for both G28 and probing functions.	2017-04-27 18:52:58 -05:00
LVD-AC	d8102aeca8	Cn negative : no tower angle calibration ... Giving a negative number of probe points disables the tower angle correction calibration ('4point' instead of '7point' solution) EEPROM version updated	2017-04-27 21:13:07 +03:00
Roxy-3D	3601f08e87	Better tuned FolgerTech i3-2020 example file	2017-04-27 11:16:38 -05:00
Roxy-3D	a20b7d9581	Better tuned Example file for FolgerTech i3-2020 ... Also setting up Z-Probe on the machine.	2017-04-27 11:16:38 -05:00
Kai	bf2fe46062	Update language_de.h	2017-04-27 10:13:02 +02:00
Kai	11d34be060	Update language_de.h	2017-04-27 10:06:26 +02:00
Scott Lahteine	817ecb9ff4	Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday ... Minor cleanups, work-in-progress	2017-04-26 19:41:52 -05:00
Roxy-3D	22f6e277af	Get example files fully into compliance ... Change to support new name GRID_MAX_POINTS_XY Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME	2017-04-26 16:22:17 -05:00
LVD-AC	a9bc1d30cc	z_offset change ... Avoids to have to recalibrate the delta_height after a z_offset change	2017-04-26 21:57:11 +03:00
Roxy-3D	ec26e23e7e	Add my two 'Nice' machines as example configurations ... These are my two 'Nice' machines. Both are good example machines. The FolgerTech i3-2020 is probably the best value kit on the market right now. And it has developed a 'Cult Following' of hobbiests. I'll always have an up to date Configuration.h file set for it, so it may as well be an example configuration. And the gCreate gMax 1.5+ is the best printer I've ever seen that runs Marlin. For sure, I'll always have up to the minute Configuration.h files for this printer also. I've moved over to using the gMax as my primary development machine for Marlin. So... Besides being a good machine, it is a nice convienience for me to have this Configuration.h file as an 'Example'.	2017-04-26 12:46:12 -05:00
Scott Lahteine	adb8e68592	Fix stuck "Print Aborted" LCD message ... Fixes #6393	2017-04-26 06:24:23 -05:00
Scott Lahteine	096b927102	Minor optimization of FILAMENT_WIDTH_SENSOR	2017-04-26 06:24:23 -05:00
Scott Lahteine	5bdb0b567d	Cosmetic patches	2017-04-26 06:24:23 -05:00
Kai	38ae7f4238	Added more translation strings ... There are some quite tricky ones which are hardly translateable. Maybe @Sebastianv650 can review this	2017-04-26 11:58:11 +02:00
Scott Lahteine	4d96d3eab1	Bootscreen delay after clear, then set chars ... Fixes #6426	2017-04-25 23:37:28 -05:00
Scott Lahteine	5512130d6c	Only set Compare Mode for channel A ... Fixes #6445	2017-04-25 23:14:16 -05:00
Roxy-3D	d467e97679	Smart-Fill and Mesh-Tilting (both 3-point and grid) working! ... Also... The memory corruption issue may be fixed. The GCC compiler was inlining static functions and this caused the G29() stack frame to become much larger than the AVR could handle.	2017-04-25 21:03:41 -05:00
Scott Lahteine	a699967ec8	Merge pull request #6443 from thinkyhead/rc_interrupt_fastio ... Patch fastio.h with Timer 2 interrupt support	2017-04-24 20:09:41 -05:00
Scott Lahteine	2823bf0874	Update fastio.h with special handling for Timer 2	2017-04-24 16:58:22 -05:00
Scott Lahteine	fd535e111a	Fix up XYZ_CONSTS_FROM_CONFIG macro	2017-04-24 14:05:11 -05:00
Kai	03c2f756b9	Update language_de.h	2017-04-24 13:32:16 +02:00
LVD-AC	dcf30a69d6	Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS] ... More consistent with M665 where C-value is allowed as well, then normalized	2017-04-23 14:51:24 +03:00
Brian	f41fb2b635	Numerous UBL-related changes: ... * relocated ubl state to config. store: * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM; * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately; * removed pre_initialized state, saving 64 bytes of SRAM; * removed automatic saving of UBL state after UBL activation/deactivation; * consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM; * minor update to G29 Sx notes/instructions; * renamed mesh load and save parameter to 'slot' from 'm' for clarity;	2017-04-22 18:44:39 -05:00
Brian	f1a4758cef	use progmem instead of sram for mesh_index_to_x/ypos array; ... fix maximum mesh_index_ array size at 16 (15+1);	2017-04-22 18:34:49 -05:00
Scott Lahteine	87d240042a	Optimize number-to-string functions, no-fan display	2017-04-22 16:23:15 -05:00