Scott Lahteine
77b9a41f1f
Add G-code extensions to example configs
2018-10-06 00:15:35 -05:00
thesfreader
e09c144674
Add CNC-like G-code options
2018-10-06 00:15:27 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM ( #12016 )
2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03
Fix up leading/trailing whitespace
2018-10-05 18:19:59 -05:00
Marcio Teixeira
03fc4d31d0
Makefile support for 32-bit Archim board and new TMC library ( #11997 )
...
* Support new TMC library and 32-bit Archim board
- Added IS_MCU flag
- When IS_MCU flag is 1, AVR compiler will be used
- When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
2018-10-05 16:06:11 -05:00
Scott Lahteine
65b36642f8
Fix Anycubic Kossel config
2018-10-04 20:27:05 -05:00
Scott Lahteine
fc326b3dde
Add USB_FLASH_DRIVE_SUPPORT to examples
...
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
2018-10-04 19:54:12 -05:00
Marcio Teixeira
2067619a26
Add USB_FLASH_DRIVE_SUPPORT
2018-10-04 19:54:12 -05:00
Giuliano Zaro
07fe8d28be
[2.0.x] Partial Italian revert ( #12008 )
...
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
2018-10-04 14:38:54 -05:00
Scott Lahteine
517b4f4cd4
Fix lightweight UI hotends display
2018-10-04 14:37:24 -05:00
Giuliano Zaro
72a750e0eb
[2.0.x] Update Italian language ( #11996 )
2018-10-04 03:03:47 -05:00
Scott Lahteine
bb561baf9e
Tweak some config comments
2018-10-04 02:42:12 -05:00
Nils Hasenbanck
fcf6d127fd
STM32 timer simplification ( #11995 )
...
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
2018-10-03 22:33:24 -05:00
Scott Lahteine
8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status ( #11993 )
2018-10-03 11:56:49 -05:00
Scott Lahteine
c40ea1f0fd
Update EEPROM_VERSION
...
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319
Make MAX_EXTRUDERS always 6
2018-10-03 11:32:19 -05:00
AnoNymous
001f26b642
Template struct simplification for serial ( #11990 )
2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core ( #11750 )
2018-10-03 03:26:07 -05:00
Scott Lahteine
3e58b3a5d4
Followup to #11943
2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34
Migrate to a new TMC library ( #11943 )
2018-10-03 02:48:49 -05:00
brian park
2abf3d258d
Korean language translation support ( #11987 )
2018-10-03 01:53:34 -05:00
Eduardo José Tagle
d6955f25b2
Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes ( #11988 )
2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59
Templatized serial classes ( #11982 )
2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813
Revert header reorg.
2018-10-02 22:09:41 -05:00
Scott Lahteine
d619ba2685
Tweak STM32F4 config
2018-10-02 22:03:00 -05:00
LineF
d777cef837
fixed minimum macro ( #11986 )
2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF ( #11984 )
...
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695
Make DISABLE_INACTIVE_EXTRUDER a simple switch
2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers ( #11983 )
2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc
[2.0.x] Add simultaneous retraction for mixing extruder ( #11941 )
2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b
Tweak some comments
2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1
Ensure MIN/MAX overrides
2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402
Reorganize some enums
2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3
Reduce STM32F4 compile warnings
2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120
Apply MOVE_Z_WHEN_IDLE to example configurations
...
Co-Authored-By: dot-bob <gibben@gmail.com>
2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74
Add option to move Z on double-click when idle
2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e
Clean up softspi.h
2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d
Clean up BABYSTEP options
2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36
Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled ( #11973 )
2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392
Clean up main menu ( #11972 )
2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916
Home before level corners, if needed ( #11976 )
...
…and add a consistent homing screen for all LCD pre-homing.
2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7
Add filament runout sensor menu item ( #11971 )
2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea
Adjust some HAL formatting
2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a
Followup to minmax patch
...
Co-Authored-By: Palatis <palatis@gmail.com>
2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713
Remove trailing spaces, old comment
2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97
Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD ( #11964 )
2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae
Replace MIN# / MAX# with variadic MIN / MAX ( #11960 )
2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478
Tweak vector_3::apply_rotation
2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876
Fix SERIAL_PORT_2 sanity check
2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93
Avoid copies in vector and matrix ( #11959 )
2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649
Fix some whitespace
2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing
...
[2.0.x] Add TMC2130 sensorless probing
2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086
Correction for block->mix_steps
...
Fix #11484
2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac
Improve support for JTAG/SWD pins reuse ( #11963 )
...
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656
Apply sensorless changes to example configs
2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044
Add TMC2130 sensorless probing
2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56
Corrections for dylsexic TMC
2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852
Fix Busy State in temperature.cpp
...
Fix #11954
2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8
[2.0.x] Fix compile error ( #11951 )
...
Fix compile error intruduced with M109 modification
2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949
Anycubic Kossel: probe closer to the edge ( #11950 )
2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f
Ensure M109 handles autotemp
2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating ( #11949 )
2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a
Fix a sanity check
2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1
Followup to #11904
2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81
Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS ( #11948 )
2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c
Pause should use ECHOLNPGM
2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b
Tweaks to HAL format and order
2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a
Tweak STM32F7 TMC2660 class
2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35
Reduce Raptor bootscreen by 144 bytes
2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b
Add Formbot Raptor config, fix other Formbot configs ( #11926 )
2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3
[2.0.x] Add pin configuration for Fysetc F6 ( #11932 )
2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a
HAL general support for DISABLE_JTAG option ( #11211 )
...
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date ( #11939 )
2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8
Fix case of T-Rex 3 _Statusscreen.h
2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2
Fix case of T-Rex-3 _Statusscreen.h
2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d
Update some configs
2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c
Workaround for Pronterface M29
2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db
[2.0.x] Anycubic Trigorilla 14 pins tweak ( #11869 )
2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630
Add GT2560 v3 support ( #11914 )
2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e
Stow probe on probing failed ( #11936 )
...
Prevents probe from being left down should probing fail and print job continue
2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101
[2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow ( #11929 )
2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656
[2.0.x] fix possible race condition ( #11923 )
...
Fix some commits done in #11900
2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11
Followup for Endstop Noise Threshold
...
Followup to #11912
2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325
Tweak some config comments
2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold ( #11912 )
2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8
Update config files
2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d
[2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) ( #11900 )
2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568
Followup for 6 extruders
2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115
Add a blank line
2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02
Fixed warning about comparing signed to unsigned ( #11909 )
2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW ( #11905 )
2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8
Move probe extras below probe types
2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f
Update Sublime files
2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69
Support for manually deployed fixed probes ( #11899 )
2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23
Followup for Z_TRIPLE_ENDSTOPS
2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d
[2.0.x] Squelch compiler warnings seen with -Wall ( #11889 )
2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0
Better default values for Mesh Inset
2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514
Fix end stop and Z-probe reporting logic
2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f
Fix servo angles in config-store
2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210
Add MAX7219 reverse units option ( #11860 )
2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8
Remove extra clauses in config-store
2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45
Followup to #11769
2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55
Add custom user menu title ( #11769 )
2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9
Fix parking_extruder_tool_change
...
Fix #11872
2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8
E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 ( #11865 )
2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80
Fix some fan conditionals
2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8
Fix Dual X FRS in M600
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors ( #11861 )
2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f
Fix some trailing whitespace, macros
2018-09-17 17:30:04 -05:00
AnHardt
54bd124665
2.0.x: Fix normalize_mix() ( #11856 )
...
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file
2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development
...
Take it out of the menu until it is tested and working.
2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b
tmc_util fix part 2
...
Followup to 115abf9
2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 ( #11851 )
2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53
Fix syntax error in front of tmc_axes
2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848
IDEX Improvements ( #11848 )
2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4
Tweak indent of Chinese languages
2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb
Followup for 6 extruders
2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a
Code changes supporting up to 6 extruders
2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d
Config changes supporting up to 6 extruders
2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867
RADDS Extension Board V3 support
2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
2018-09-16 21:24:15 -05:00
Scott Lahteine
8323a08642
Clean up some whitespace
2018-09-16 19:44:21 -05:00
Scott Lahteine
6286afd456
Add Triple-Z options to example configs
2018-09-16 00:35:58 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller
bc06406d7d
Fix Anycubic Kossel config (probe crash) ( #11832 )
2018-09-15 23:27:21 -05:00
Scott Lahteine
66f83d33e6
Fix some config comments
2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller
84ed9b5a63
Send "G33 S P1" for Delta Height Calibration ( #11831 )
2018-09-15 20:17:35 -05:00
Scott Lahteine
215eee4fe5
Use 'friend' to access set_directions
2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d
Fix for Stepper::set_directions() compilation error ( #11838 )
2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2
Fix stepper directions after M501/M502
...
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611
Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
2018-09-14 20:00:55 -05:00
Scott Lahteine
f79a5a9dee
Tweak spacing of L6470 options
2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller
c37d3ae97d
[2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel ( #11812 )
2018-09-12 15:37:38 -05:00
HenningJW
4fb2134f00
Fix non-sensical values for Zonestar themistor table ( #11817 )
...
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7
Fix raw_filwidth_value error
2018-09-12 04:31:55 -05:00
Scott Lahteine
1933d5d6fb
Fix SD autostart with no LCD
2018-09-12 03:49:59 -05:00
Roman Moravčík
8bce5370c7
Updated slovak translation ( #11807 )
2018-09-12 03:29:17 -05:00
Giuliano Zaro
64d629ba2a
[2.0.x] Italian language fix ( #11796 )
2018-09-12 03:28:22 -05:00
Scott Lahteine
8584d3697d
Fix servo count define conflict
...
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
2018-09-11 16:20:31 -05:00
Scott Lahteine
06949ae510
Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD
2018-09-10 23:21:37 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr ( #11798 )
...
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971
[2.0.x] Extruder-Distinct Linear Advance K Factors ( #11789 )
2018-09-10 22:37:32 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 ( #11730 )
2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322
Tweak RAMPS_FD_V1 pins
2018-09-10 15:43:03 -05:00
Scott Lahteine
7391e23332
Fix RigidBoard FAN_PIN collision
2018-09-10 05:29:00 -05:00
Scott Lahteine
53b8c3bd66
Add EXTERNAL_CLOSED_LOOP_CONTROLLER to examples
2018-09-10 03:17:17 -05:00
Sam Lane
1b6bc19427
Add external closed loop controller support
2018-09-10 03:17:17 -05:00
Marcio Teixeira
2ebfe90be9
Add custom preheat temp to filament change ( #11475 )
2018-09-10 02:51:46 -05:00
Karl Andersson
69d0ed5791
[2.0.x] Fix ambiguous function call (SERIAL_PROTOCOL_F) when using Arduino_Core_STM32 ( #11747 )
2018-09-10 02:36:06 -05:00
Scott Lahteine
d32c4efc77
Fix some trailing whitespace
2018-09-10 01:26:20 -05:00
Alexander Amelkin
bc1ba998b2
[2.0.x] Fix undefined symbol 'g29_in_progress' ( #11781 )
2018-09-09 22:06:03 -05:00
InsanityAutomation
bad225dc04
Fix mesh leveling compile errors ( #11768 )
2018-09-09 04:19:48 -05:00
Sam Lane
d783400330
Updates to STM32F7 HAL, for completeness ( #11770 )
2018-09-09 03:26:15 -05:00
Scott Lahteine
72af8e0f02
Patch extruder_advance_K edit menu
...
Fix #11776
2018-09-09 03:21:08 -05:00
Sebastianv650
7e8c073fba
Fix extruder stops extruding with LA ( #11758 )
2018-09-09 00:04:14 -05:00
Scott Lahteine
0c01099f17
hop_amount => current_hop
2018-09-08 21:20:37 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 ( #11714 )
2018-09-08 20:41:21 -05:00
Kevin
e25d2ae4a2
[2.0.x] SWITCHING_TOOLHEAD ( #11623 )
2018-09-08 01:43:24 -05:00
Alexander Amelkin
f417408df1
[STM32F1] Fix HAL for new PlatformIO ( #11749 )
2018-09-07 18:15:32 -05:00
Roxy-3D
3d7f2c1fde
Fix directory name to be consistent ( #11745 )
2018-09-06 14:10:40 -05:00
Roxy-3D
a9c98a0e47
Create _Bootscreen.h
2018-09-06 10:24:03 -05:00
Roxy-3D
9f85d3a9cb
Create _statusscreen.h
2018-09-06 10:23:20 -05:00
Roxy-3D
e2e7b1d705
Break out support of the T-Rex 3
2018-09-06 10:20:20 -05:00
Roxy-3D
67996c2b66
Break out support for the T-Rex 3
2018-09-06 10:19:05 -05:00
Roxy-3D
9c8d9d282f
Break out support for Formbot T-Rex3 from previous versions
2018-09-06 09:49:04 -05:00
Roxy-3D
e3aac59637
Create pins_FORMBOT_TREX3.h
2018-09-06 09:46:23 -05:00
Roxy-3D
f580247581
Create pins_FORMBOT_TREX2.h
2018-09-06 09:45:29 -05:00
Roxy-3D
073857646b
seperate the T-Rex2 and T-Rex3 support
2018-09-06 09:43:43 -05:00
Roxy-3D
fe4fc2883b
Add support for Formbot T-Rex3
2018-09-06 09:41:59 -05:00
Scott Lahteine
2a61c9a939
Various fixups to configs, spacing, etc.
2018-09-06 06:44:31 -05:00
Scott Lahteine
b3efbc6e6e
Add MANUAL_E_MOVES_RELATIVE to more configs
2018-09-06 02:09:14 -05:00
Scott Lahteine
679e4602fe
Add MANUAL_E_MOVES_RELATIVE to examples
2018-09-06 02:00:25 -05:00
Marcio Teixeira
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
2018-09-06 02:00:25 -05:00
Scott Lahteine
d10f29ae2e
Pass segment length in G2-G3
2018-09-06 01:43:27 -05:00
Scott Lahteine
dcfde2317f
Pass segment length in prepare_kinematic_move_to ( #11737 )
2018-09-06 01:40:22 -05:00
Roxy-3D
d5379ee9d6
Fix search for white space in enqueued commands
2018-09-05 16:57:08 -05:00
Roxy-3D
8d5bea073b
Assume one Max7219 unit if not specified
2018-09-05 14:18:13 -05:00
Roxy-3D
9651ceb36b
Correct spelling of #endif
2018-09-05 10:46:08 -05:00
Scott Lahteine
b213a89ef5
Sanity-check NOZZLE_PARK_POINT
2018-09-05 06:18:08 -05:00
Scott Lahteine
86ee74731e
Comment for RADDS + RRDFGSC
2018-09-05 05:45:17 -05:00
Kevin
ae1271b2ae
RADDS: Update Full Graphic Display Pins ( #11731 )
2018-09-05 03:51:54 -05:00
Scott Lahteine
650d4313c4
Bring some configs up to date
2018-09-05 03:49:24 -05:00
AnHardt
530a13ab6c
[2.0.x] SECURITYFIX missing max temp error when PID is used ( #11717 )
2018-09-05 01:41:45 -05:00
Scott Lahteine
12fded46c2
Correct some FR strings
...
Co-Authored-By: pipersw <pipersw@users.noreply.github.com>
2018-09-04 04:00:22 -05:00
Michael Triffon
aefc2f7cf9
Add Anet A2 and A2 Plus Configurations ( #11677 )
2018-09-03 23:38:51 -05:00
scott0122
72fdb6bab3
Fix SWITCHING_NOZZLE zdiff ( #11683 )
2018-09-03 23:24:40 -05:00
Scott Lahteine
8b837dc3ad
No need for last \n in G-code items
2018-09-03 23:23:20 -05:00
Scott Lahteine
d1ceaf5550
[2.0.x] Followup to IDEX changes ( #11707 )
2018-09-03 23:15:31 -05:00
Roxy-3D
d62f4df0b7
Disable LCD Pins used by new Max7219 hook up if in that mode
2018-09-03 09:56:25 -05:00
Roxy-3D
fa772c31bf
Provide more options for Max7219 connection on Formbot
2018-09-03 09:52:36 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x
...
[2.0.x] Editable servo angles
2018-09-03 03:55:38 -05:00
Giuliano Zaro
59e76e5fdf
[2.0.x] Fix planner computation ( #11708 )
...
Fix #11697
2018-09-03 00:29:29 -05:00
Roxy-3D
509ee44611
Boot and status file should not have been added to main directory!
2018-09-02 10:25:36 -05:00
Roxy-3D
f8abe12a9c
Boot and status file should not have been added to main directory!
2018-09-02 10:25:13 -05:00
Roxy-3D
7680b64aa6
IDEX clean up ( #11690 )
2018-09-02 10:18:59 -05:00
teemuatlut
49e107cea9
Restrict SW serial to AVR ( #11696 )
2018-09-01 15:24:44 -05:00
