441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
bdd366b97c
Update sensor -5 label
2019-11-21 04:57:57 -06:00
20964ca7dc
Bring configs up to date
2019-11-21 04:48:18 -06:00
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
47e4e5f1db
Update thermocouple comments
2019-11-20 23:51:51 -06:00
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
aa93e1f21a
Update TMC_ADV examples
2019-11-15 02:15:10 -06:00
7e9c846ec3
Modify comment for unlimited E steppers
2019-11-13 01:45:50 -06:00
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
ccf61eca84
Fix diplay elaspsed
2019-10-24 13:48:27 -05:00
0b0b822671
Add note: TMC2209 requires stealthChop for Sensorless Homing ( #15658 )
2019-10-24 11:58:37 -05:00
16ae9ee88b
Update Configuration_adv
2019-10-17 05:37:22 +07:00
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
b2eda1af2f
Fix typo in G34 configuration ( #15572 )
2019-10-15 17:22:13 -05:00
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com >
2019-10-15 12:32:44 -05:00
59378db7de
Eliminate clutter in Formbot T-Rex 3 Configuration.h file
...
The extra clutter was making the Junction Deviation patch script calculate the wrong value.
(The script wasn't smart enough to see the extra lines were commented out and used the wrong values in the calculation.)
All fixed now with a JUNCTION_DEVIATION_MM calculated at .017
2019-10-11 17:11:24 -05:00
c8e348731f
Correct Junction Deviation value for Formbot Raptors
...
Re-apply the formula .4 * V^2 / Default_Acceleration to work correctly in Raptor configuration.h file.
(The problem is there are multiple XJerk and YJerk values declared based on the step sticks used on the printer.)
This change should provide correct values for all setups.
2019-10-11 16:52:47 -05:00
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
a1ad01e4ab
Limit Case Light PWM ( #15459 )
2019-10-05 22:32:50 -05:00
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
178dcd6fd8
SPI chaining with TMCStepper simplified interface ( #15179 )
2019-09-29 05:47:20 -05:00
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
f28f191ebf
Trailing whitespace ( #15403 )
2019-09-28 15:32:37 -05:00
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
9a209012b5
Improve M114_DETAIL comment
2019-09-25 20:29:29 -05:00
149e9b733e
Simplified ExtUI language selection ( #15359 )
2019-09-25 01:25:21 -05:00
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
4ff59d178d
LULZBOT_TOUCH_UI extended character set ( #15301 )
2019-09-24 18:49:40 -05:00
6a312fae80
Add before/after dir change delays ( #15314 )
2019-09-19 23:05:17 -05:00
d277e93f4d
Configurable TOUCH_BUTTONS repeat delays ( #15245 )
2019-09-16 21:32:55 -05:00
843a19102c
Shorten an option description
2019-09-14 16:45:04 -05:00
18821f29d5
LULZBOT_TOUCH_UI: Localization, runtime language selection ( #15249 )
2019-09-14 06:51:49 -05:00
832be5dd36
Cosmetic: Align Z_STEPPER_ALIGN values
2019-09-12 00:02:44 -05:00
1d574b0f6a
Tweak config spaces
2019-09-11 17:32:54 -05:00
3648bce886
Tweak NOZZLE_CLEAN_START_POINT spacing
2019-09-11 01:50:24 -05:00
47d19bab40
Lulzbot ExtUI Western language support ( #15208 )
...
Fix #15134
2019-09-10 20:07:03 -05:00
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
a3052da703
Move manual move to lcd section
2019-09-06 18:24:39 -05:00
94d3153fb6
Remove obsolete TMC_USE_CHAIN
2019-09-06 15:48:08 -05:00
