bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
11,370 Commits 1 Branch 4 Tags 151 MiB
4e0c935959
Commit Graph

166 Commits

Author SHA1 Message Date
Scott Lahteine
fb608938f8 Prevent compilation of unused u8g-oriented code 2018-05-14 13:31:04 -05:00
Scott Lahteine
37b15fe4cf Reorder HAL timer header items 2018-05-13 16:50:39 -05:00
Scott Lahteine
99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
etagle
9d98a62699 Followup to HAL optimizations and delays 
- Cleanups, fixes for Due HAL code.
- TC_IER is write-only. Use TC_IMR to test ISR state.
 2018-05-13 00:46:23 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 08:34:04 -05:00
etagle
1b225a2809 DUE: Emergency parser for the USB CDC 2018-05-12 02:12:11 -05:00
Scott Lahteine
0436e16fb2 Apply shorthand Assembler macros 2018-05-08 10:08:54 -05:00
Scott Lahteine
d1b619be52 Standardize some hexadecimals 2018-05-08 09:19:18 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports (#10524) 2018-04-25 20:58:00 -05:00
Chris Pepper
2242b98248 [LPC176x] Emergency Parser Feature (#10516) 2018-04-25 06:44:26 -05:00
Eduardo José Tagle
c1e5ebbc1e [2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502) 
* AVR: Atomic bit set and clear

The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
 2018-04-24 13:45:43 -05:00
Eduardo José Tagle
0c428a66d9 Proper AVR preemptive interrupt handling (#10496) 
Also simplify logic on all ARM-based interrupts. Now, it is REQUIRED to properly configure interrupt priority. USART should have highest priority, followed by Stepper, and then all others.
 2018-04-23 22:05:07 -05:00
Chris Pepper
cc6d41e1d3 Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00
Scott Lahteine
9ff4e9e1e6 Patch _IS_HW_SPI so defined() works 2018-04-07 23:29:00 -05:00
Bob-the-Kuhn
acda4ecb20 Fix DUE Trinamic SW/HW SPI sanity check (#10336) 2018-04-06 22:22:30 -05:00
Bob-the-Kuhn
902c885782 Switch to TMC2130 compatible hardware SPI & misc (#10299) 2018-04-04 20:13:27 -05:00
Scott Lahteine
93305a2d5e Fix some spellings 2018-04-02 03:03:37 -05:00
Scott Lahteine
889fd5f71f Backtrace minor cleanup 2018-03-31 18:59:36 -05:00
Eduardo José Tagle
749f19e502 [2.0.x] Move backtrace to a shared location (#10237) 
- And implement the `backtrace()` function call
 2018-03-28 14:13:20 -04:00
etagle
8934a2c49b Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements 2018-03-27 04:30:38 -03:00
etagle
328edea03a Several fixes to the backtracer. Tested ant it works 2018-03-26 03:42:54 -03:00
ejtagle
9a24c0ae3f Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent 2018-03-25 00:52:04 -03:00
Bob-the-Kuhn
f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x 
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
 2018-03-24 13:32:34 -05:00
Bob-the-Kuhn
509227fd80 change to mode 0 2018-03-23 09:37:58 -05:00
etagle
c3b23974bd Added detection of case when no unwind tables are available 2018-03-23 05:22:45 -03:00
etagle
b210bdf032 Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags 2018-03-22 03:34:03 -03:00
etagle
c5730cf711 As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port 2018-03-22 03:31:25 -03:00
Eduardo José Tagle
97e8a6ebd9 Various fixes for DUE... (#10152) 
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
 2018-03-21 19:04:45 -05:00
Bob-the-Kuhn
7308ef7809 Add conditional, give DUE SPI a unique name, fix compiler warnings (#10168) 2018-03-20 15:53:21 -05:00
Bob-the-Kuhn
53362b81cc Tone fixes/changes (#10151) 2018-03-19 04:48:06 -05:00
Eduardo José Tagle
bbfbf90797 Fix for DUE - no host support on native USB if SD card not enabled (#10148) 2018-03-18 19:49:51 -05:00
Bob-the-Kuhn
7f1afbfd60 can't type 2018-03-17 13:07:49 -05:00
Bob-the-Kuhn
23760d6c14 add full speed option 2018-03-17 12:56:44 -05:00
Bob-the-Kuhn
cbcd1ed42d full speed 2018-03-17 02:57:18 -05:00
etagle
404fc94705 DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin 2018-03-15 00:56:28 -03:00
Bob-the-Kuhn
c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x 
[2.0.x] DUE - add programming capability to native port
 2018-03-13 22:07:21 -05:00
Scott Lahteine
36452b4d6e Fix filename HAL/DUE/servotimers.h => ServoTimers.h 2018-03-13 01:38:37 -05:00
ejtagle
703c8ac0ef Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs 2018-03-11 15:17:55 -03:00
Scott Lahteine
dd19e74476 Cleanup trailing whitespace 
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
 2018-03-11 10:29:00 -05:00
Bob-the-Kuhn
0d8c15c01f restore PR 9661 files & V1 fix 2018-03-10 22:46:32 -06:00
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 2018-03-10 17:22:20 -06:00
Bob-the-Kuhn
914bb80bde removed SDSS init 
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
 2018-03-09 23:06:11 -06:00
Bob-the-Kuhn
67a17446f2 Fix DUE incompatible enum type specification (#10017) 2018-03-09 02:17:57 -06:00
Bob-the-Kuhn
3c58ca181c [2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 (#10016) 2018-03-09 02:11:28 -06:00
Scott Lahteine
98d48fc731 Followup to HAL_timer_restrain 
Followup to #9985
 2018-03-07 22:18:37 -06:00
Scott Lahteine
ca577c1638 Fix up various spacing, comments, and typos 2018-03-07 21:09:08 -06:00
Scott Lahteine
d45f19d385 Remove Unicode from var name 2018-03-07 19:08:44 -06:00
Chris Pepper
a1a88ebabc HAL function to ensure min stepper interrupt interval (#9985) 2018-03-07 17:53:25 -06:00
Scott Lahteine
2057177184 Make enums into implicit char 2018-03-06 23:39:56 -06:00
Scott Lahteine
649f375494
Fix: M112 calling kill from interrupt (#9923) 
Fix #9906
 2018-03-03 23:14:01 -06:00
Scott Lahteine
cfdcf91df5 Fix compile error with initTone 2018-02-26 01:49:48 -06:00
Scott Lahteine
f2c0ed193d
Add tone support for Due (#9807) 2018-02-25 10:48:14 -06:00
Scott Lahteine
61688233c7 HAL style tweak 2018-02-25 05:00:44 -06:00
Scott Lahteine
90fa423737
Preliminary cleanup of #include structure (#9763) 2018-02-23 00:52:52 -06:00
Scott Lahteine
a810e585db Drop HAL_timer_set_count 2018-02-20 03:10:39 -06:00
Scott Lahteine
0106c3e476 Style tweak in MarlinSerialUSB_Due.h 2018-02-19 06:58:26 -06:00
Scott Lahteine
1bf2b1e475 Use serial macro in sd_mmc_spi_mem.cpp for Due 2018-02-16 17:57:24 -06:00
Scott Lahteine
03d790451f
[2.0.x] HAL timer set/get count => set/get compare (#9581) 
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
 2018-02-10 20:42:00 -06:00
Bob-the-Kuhn
428f164d02 [2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) (#9481) 2018-02-04 16:11:27 -06:00
Scott Lahteine
c46de340b7 Clean up trailing whitespace 2018-02-03 20:05:23 -06:00
Bob-the-Kuhn
a0570ff1eb Fix caselight on Due (#9364) 2018-02-02 04:13:33 -06:00
Bob-the-Kuhn
c6e01ebd52 never mind ... 2018-01-25 22:13:32 -06:00
Bob-the-Kuhn
ab709ccac1 add USEABLE_HARDWARE_PWM & clear up some compiler warnings 2018-01-24 21:42:36 -06:00
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem 2018-01-18 23:00:03 -06:00
Scott Lahteine
ac368f2788 Add STEPPER_ISR_ENABLED() to HALs 
Some also get a `HAL_timer_interrupt_enabled` function.
 2018-01-14 21:07:10 -06:00
Thomas Moore
84de428d30 [2.0.x] Fix compile errors (#9141) 
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
 2018-01-11 21:43:26 -06:00
Scott Lahteine
6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Scott Lahteine
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host 
[2.0.x] Add multi-host support
 2018-01-10 02:38:59 -06:00
teemuatlut
a8c446c3bc [2.0.x]DUE: Fix includes for SDSUPPORT (#9112) 2018-01-10 00:46:34 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Scott Lahteine
51e0f2bee3 Add MarlinSettings::validate() 2018-01-05 14:35:24 -06:00
Scott Lahteine
1c41de16d4 Trailing whitespace clean 2018-01-05 10:11:31 -06:00
Bob-the-Kuhn
4626d04067 as good as i can get it 
minor edits to force new Travis test (last one timed out)

Update u8g_com_HAL_DUE_st7920_sw_spi.cpp

initial power up display garbage gone
 2018-01-03 22:46:31 -06:00
Bob-the-Kuhn
e5b71af8c9 snapshot 
found a few more nasties
 2018-01-03 10:41:23 -06:00
revilor
959a2d2527 Add beginTransaction to HAL SPI (#9019) 2018-01-03 05:12:25 -06:00
Bob-the-Kuhn
adb9ecf3cc copy of PR #8990 2018-01-01 16:11:56 -06:00
etagle
729a9f55fc Improved Sw SPI on DUE HAL a bit more. 
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
 2017-12-30 17:24:38 -06:00
Scott Lahteine
2c4e03d2cf Indentation of a SW SPI file 2017-12-25 09:34:43 -06:00
Scott Lahteine
1a827d5b68 Opening brace tweaks 2017-12-25 09:34:43 -06:00
Bob-the-Kuhn
a142fab155 Enable RRDFGSC on Due 2017-12-25 09:22:14 -06:00
Bob-the-Kuhn
1a948cbd93 Fix SET_OUTPUT glitch - LPC1768 & DUE 2017-12-24 19:25:32 -06:00
etagle
33a6fc70e4 Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC) 2017-12-21 02:42:46 -03:00
etagle
d8a4db72ac Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds) 2017-12-21 02:35:49 -03:00
Scott Lahteine
fc9ee1a4de Fix up serial sanity check 2017-12-19 19:11:43 -06:00
Eduardo José Tagle
ac168a03c8 Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651) 
* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style cleanup (2)

* Style fixes (3)

* Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port

* Improving the Fast IO port access implementation on Arduino DUE

* Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling)

* Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it.

* Fixing the case where the serial port selected is the USB device

* Adding configuration for the Makerparts 3D printer (www.makerparts.net)

* Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration

* Fine tuned Maximum acceleration for MakerParts printer

* Style cleanup

* Style changes to u8g_dev_st7920_128_64_sw_spi.cpp

* Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles

* After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working

* Moved comments out of macro, otherwise, token pasting does not properly work sometimes

* Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency

* Update u8g_dev_st7920_128_64_sw_spi.cpp

* Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present
 2017-12-12 17:51:36 -06:00
Scott Lahteine
6149b82119 Allow setting current timer counter 2017-12-10 18:38:53 -06:00
Scott Lahteine
82ef6b5242 Add an option to specify "pulse" timer 2017-12-10 18:38:53 -06:00
Scott Lahteine
b8bc965414 General cleanup HAL timers 2017-12-10 18:38:52 -06:00
Scott Lahteine
de3d3b9cb1 Put FORCE_INLINE before static 2017-12-08 00:46:22 -06:00
Unknown
4c5ffd2349 [2.0.x] Report SERIAL_XON_XOFF in M115 
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
-Update error message conditions
 2017-12-02 21:08:06 -08:00
Thomas Moore
34eaaab5fb Fix _BV already defined warnings 2017-11-24 21:59:31 -06:00
Scott Lahteine
c613a1ed38 Fix indentation, stepper.h dependency, etc. 2017-11-22 14:55:30 -06:00
teemuatlut
f011a32771 Board definitions for Ultratronics Pro v1.0 2017-11-22 14:55:24 -06:00
Scott Lahteine
550f1025f0 Try using <Arduino.h> everywhere 2017-11-19 14:23:02 -06:00
Scott Lahteine
32512332df Apply some formatting 2017-11-18 03:12:30 -06:00
Scott Lahteine
5079a02c90 Add HAL_SERVO_LIB to HAL_Due.h 2017-11-15 02:07:01 -06:00
Scott Lahteine
2246316605 Fix name collision. timer_t => hal_timer_t 2017-11-05 19:31:07 -06:00
GMagician
9e93b7ccbd [2.0.x] removed spaces 
Removed spaces in array declaration
 2017-11-05 20:42:48 +01:00
teemuatlut
70be4d206e [2.0.x] UltiMachine Archim2 (#8190) 
* UltiMachine Archim2 support

* SPI gets included by the library

* Invert TMC2130 diag pin state

* Clean up Archim2 pins

* Update Archim2 config

* FAN2 -> FAN1

* Cleanup

* Add brief Archim installation instructions

* Bring pins into compliance

* Update 1.0 SD Detect pin for 1.1

* Update Configuration.h

* Update pins_ARCHIM2.h
 2017-11-03 04:48:15 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp 
const pfnISR_Handler *isrtab = get_relocated_table_addr();

What compiler do you use? Arduino 1.8.5 can't compile this "const".
 2017-10-31 15:00:06 +01:00