Commit Graph

7086 Commits

Author SHA1 Message Date
Scott Lahteine
5b3e49babd Move M108, M112, M410 to cpp 2017-09-21 16:26:56 -05:00
Scott Lahteine
df0432c7c8 Move M155 to cpp, auto-report to Temperature 2017-09-21 16:26:56 -05:00
Scott Lahteine
df031ab100 Move M106_M107 to cpp 2017-09-21 16:26:56 -05:00
Scott Lahteine
99c4b9050a Move M105 to cpp 2017-09-21 16:26:55 -05:00
Scott Lahteine
a41130f854 Temp stat LEDs 2017-09-21 16:26:55 -05:00
Scott Lahteine
2c1eda9e00 Move M75-M78 to cpp 2017-09-21 16:26:55 -05:00
Scott Lahteine
fc52fc72ac Move M48 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
be8d913484 Move M43 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
10fab24e50 Move M42 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
69b664b6fe Move M31 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
a442c34a1a Move SD commands to cpp 2017-09-21 16:26:53 -05:00
Scott Lahteine
be0e4a4ad0 Consolidate pause, apply to M125, M600, M24 2017-09-21 16:26:53 -05:00
Scott Lahteine
adca4a9b79 Move M17 to cpp 2017-09-21 16:26:53 -05:00
Scott Lahteine
33e00b6cd6 Move M3-M5 to cpp 2017-09-21 16:26:53 -05:00
Scott Lahteine
04583d46af Move M0_M1 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
04376975ce Move G92 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
931aa79d85 Move G42 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
84ddae56a8 Move G38 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
b8adae0785 Move G31_G32 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
9db5d21837 Move G30 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
13136376ee Move G27 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
a1ee1628e5 Move G20_G21 to cpp 2017-09-21 16:26:50 -05:00
Scott Lahteine
9b4aa5ea8b Move G17-G19 to cpp 2017-09-21 16:26:50 -05:00
Scott Lahteine
94d9def81c Move G12 to cpp 2017-09-21 16:26:50 -05:00
Scott Lahteine
56f4a43535 Move G5 to cpp 2017-09-21 16:26:50 -05:00
Scott Lahteine
760f29a88e Move G4 to cpp 2017-09-21 16:26:49 -05:00
Scott Lahteine
4007cbfe9e Move G2_G3 to cpp 2017-09-21 16:26:49 -05:00
Scott Lahteine
27f7e3fe6f Hide problem pins in pin debug list 2017-09-21 16:26:49 -05:00
Scott Lahteine
9c21191f74 Rename SPI class to avoid conflict (good?) 2017-09-21 16:26:49 -05:00
Scott Lahteine
51f195e698 Move dwell to gcode 2017-09-21 16:26:48 -05:00
Scott Lahteine
4f1eadf41f FILAMENT_WIDTH_SENSOR feature 2017-09-21 16:26:48 -05:00
Scott Lahteine
d5fe0fb02b Consolidate PrintCounter 2017-09-21 16:26:48 -05:00
Scott Lahteine
551752eac7 Consolidate "bedlevel" code 2017-09-21 16:26:47 -05:00
Scott Lahteine
71aefc2e22 Move heater output to Temperature class 2017-09-21 16:26:47 -05:00
Scott Lahteine
63228fc453 Move volumetric flag to GCodeParser 2017-09-21 16:26:47 -05:00
Scott Lahteine
bf7af95db3 Move flow_percentage to Planner 2017-09-21 16:26:46 -05:00
Scott Lahteine
8dc2838d98 Move host keepalive to GcodeSuite 2017-09-21 16:26:46 -05:00
Scott Lahteine
8fbb833de9 Encapsulate RGB(W) LEDs 2017-09-21 16:26:46 -05:00
Scott Lahteine
a98e9874db FWRETRACT as a feature 2017-09-21 16:26:46 -05:00
Scott Lahteine
722786966a Add gcode.cpp, motion.*, queue.* - Apply to some G-codes. 2017-09-21 16:26:45 -05:00
Scott Lahteine
4231faf779 Initial split-up of G-code handlers by category 2017-09-21 16:26:45 -05:00
Scott Lahteine
e0a189a481 Consolidate Buzzer 2017-09-21 16:26:45 -05:00
Scott Lahteine
bca67a5b79 Main controller updates 2017-09-21 16:26:44 -05:00
Scott Lahteine
142d8aae56 Move debugging to serial.* 2017-09-21 16:26:44 -05:00
Scott Lahteine
a1e2b5da70 Fix LCD_PINS_Dn tests in pinsDebug_list.h 2017-09-21 16:26:44 -05:00
Scott Lahteine
038f82cc38 Fix L6470 init and options 2017-09-21 16:26:43 -05:00
Scott Lahteine
42e2dd9251 Build file updates 2017-09-21 16:26:43 -05:00
Scott Lahteine
614a86a380 SD file updates 2017-09-21 16:26:43 -05:00
Scott Lahteine
82fff87e16 Pins updates 2017-09-21 16:26:43 -05:00
Scott Lahteine
3d8a0ab4b2 Module updates 2017-09-21 16:26:42 -05:00
Scott Lahteine
0fcec02db5 LCD updates 2017-09-21 16:26:42 -05:00
Scott Lahteine
7dd0a46732 Language updates 2017-09-21 16:26:41 -05:00
Scott Lahteine
4a82e95c3e Feature file updates 2017-09-21 16:26:41 -05:00
Scott Lahteine
d7ee81202f Libs updates 2017-09-21 16:26:41 -05:00
Scott Lahteine
34101224c4 Inc updates 2017-09-21 16:26:41 -05:00
Scott Lahteine
f52a31a275 Core updates 2017-09-21 16:26:40 -05:00
Scott Lahteine
479652073b Config updates 2017-09-21 15:52:17 -05:00
Scott Lahteine
54326fb06a HAL updates 2017-09-21 15:52:17 -05:00
Scott Lahteine
7e42c7563c Move build files into place 2017-09-12 14:51:06 -05:00
Scott Lahteine
b66d65f865 Move 'sd' files 2017-09-12 14:51:05 -05:00
Scott Lahteine
0b9a88d6ce Move 'pins' files 2017-09-12 14:51:05 -05:00
Scott Lahteine
2b3b7d5d7f Move 'thermistor' files 2017-09-12 14:51:05 -05:00
Scott Lahteine
0c9231fd04 Move 'module' files 2017-09-12 14:51:05 -05:00
Scott Lahteine
efa578d6b0 Move 'libs' files 2017-09-12 14:51:04 -05:00
Scott Lahteine
cc92e544a5 Move 'lcd' files 2017-09-12 14:51:04 -05:00
Scott Lahteine
5be07b5db2 Move 'inc' files 2017-09-07 07:42:55 -05:00
Scott Lahteine
9ea2ff950a Move 'gcode' files 2017-09-07 07:42:55 -05:00
Scott Lahteine
4e4d16c92e Move 'core' files 2017-09-07 07:42:55 -05:00
Scott Lahteine
fa5f9c2aec Move 'feature' files 2017-09-07 07:42:54 -05:00
Scott Lahteine
f536c4dccb Move configs 2017-09-06 06:28:30 -05:00
Scott Lahteine
48351fd6d5 Move root sources 2017-09-06 06:28:29 -05:00
Scott Lahteine
27cbb939b2 Clean up some HAL code 2017-08-31 18:36:53 -05:00
Christopher Pepper
b29b66feda Temporary fix for odd stepper behaviour with servos 2017-08-31 18:33:07 -05:00
Christopher Pepper
8afe13b1a2 Fix compile issue when watchdog was disabled 2017-08-31 18:33:07 -05:00
Christopher Pepper
b908e38d08 Add needed platform defined gaurds to compile with Arduino IDE
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
2017-08-31 18:33:07 -05:00
Scott Lahteine
a037ddbf7b Other spacing tweaks 2017-08-31 18:33:07 -05:00
Scott Lahteine
2af62a5d8d Apply spacing, const to some HAL code 2017-08-31 18:33:07 -05:00
kfazz
fa9ff6be6e try to fix LIN_ADVANCE for 32bit 2017-08-31 18:33:07 -05:00
kfazz
18f97c4013 add HardwareSerial and SoftwareSerial for Re-ARM.
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
2017-08-31 18:33:07 -05:00
Bob-the-Kuhn
01fb45b4f8 hybrid PWM system
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.

Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control.  The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.

Also added insurance to the servo code in the "disable servo after move"
section.
2017-08-31 18:33:07 -05:00
Tannoo
94dd39b3b7 LCD_UBL_memory_slot_corrections (#7516)
* LCD_UBL_memory_slot_corrections

Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`

* Add a little more safety margin...

* More corrections

Error handling when the EEPROM is not available.
2017-08-31 18:33:07 -05:00
Roxy-3D
8587c4e1ec Minor corrections to 32-bit branch (#7514)
Mostly...  clean up some compile time warnings for the 20x4 LCD Display.
2017-08-31 18:32:09 -05:00
Bob-the-Kuhn
7342d5c07a ST7565 2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
97444391e0 Servo & PWM support for LPC1768 (#7500) 2017-08-31 18:31:43 -05:00
Tannoo
859fa35287 Re-Arm bugfixes (#7495)
* UBL_correction

* RGB Map function
2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
d80877d570 Set pinMode with every digitalWrite (legacy compatibility) 2017-08-31 18:31:07 -05:00
Chris Pepper
9a950e3a5a Update the delay functions and change the default pinmap for character displays (#7434) 2017-08-31 18:31:07 -05:00
Scott Lahteine
105324b85b Match the license headers in other files 2017-08-31 18:31:07 -05:00
Bob-the-Kuhn
69704b93f2 ultralcd.cpp fix compile error - switch to int16_t 2017-08-31 18:31:07 -05:00
Chris Pepper
61c0a10efe Revert "SPI API platform implementation stubs" (#7416)
This reverts commit 2dfa6ca72a2e8d43caf4932ca0d35792f0638917.

Revert "Base HAL SPI Changes"

This reverts commit 2afc521b8b6a81b2281a038f1b99a69f4a008e64.

Revert "Initial HAL SPI API"

This reverts commit 58f7ffe09ab5bc034b6510f5204f8d342138abaa.
2017-08-31 18:31:07 -05:00
Chris Pepper
a5cf3a190c bugfix-2.0.x critical fix (#7401)
* Fix mistake in gitignore file and add in missing core files.

The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder

* Add LiquidCrystal Library and associated headers modified to compile.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
76da81c1de minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board)
Because of the Re-ARM card's pinout there is only one SPI connected to
the RepRap Discount Full Graphic LCD display.  The LCD responds to ANY
SCK transitions no matter if it's enable is inactive.  The result is
garbage (usually bars) on the LCD display whenever there is SD card
activity.

This code minimizes this by only accessing the SD card when changing
directory levels if :
SDCARD_SORT_ALPHA is enabled
SDSORT_USES_RAM is true
SDSORT_CACHE_NAMES is true

The code changes result in file names being pulled from the ALPHA SORT
memory array rather than the SD card.

The code also gives the file count and file index functions their own
variables.  When they shared a common variable the index function
sometimes resulted in the file count being short by 1.

=======================================================================

cardreader.cpp & pins_RAMPS_RE_ARM.h changes

Added another condition to cardreader.cpp to enable getting file names
only from RAM.

pins_RAMPS_RE_ARM.h :
Added comments about the SD card accesses and the LCD display
Combined all versions into this one.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
84a11cfedc HAL compatible pinsDebug & misc
Re-ARM has been tested.  AVR has not been tested.

1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h

2) added pinsDebug.h to the top level directory

3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU

4) Patched sanitycheck to stop throwing false errors.  A long term
solution will be done

5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error

======================================================================

split SanityCheck up, improve pinsDebug system

======================================================================

switch to latest pins_RAMPS_RE_ARM.h
2017-08-31 18:23:44 -05:00
Christopher Pepper
32e759c928 SPI API platform implementation stubs 2017-08-31 18:23:44 -05:00
Christopher Pepper
4183a249b6 Moved CMSIS and other LPC1768 dependencies
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
2017-08-31 18:23:44 -05:00
Christopher Pepper
b55295ad33 Post merge fix
Add macros.h to allow Enabled macro, also need to reference include files directly
2017-08-31 18:23:44 -05:00
Christopher Pepper
c66d1ac651 Debug Pins Support 2017-08-31 18:21:38 -05:00
Christopher Pepper
a31e32969f Base HAL SPI Changes 2017-08-31 18:21:38 -05:00
Christopher Pepper
bcd050f33b Initial HAL SPI API 2017-08-31 18:21:38 -05:00
Christopher Pepper
44b0c186a6 HAL for Re:ARM (LPC1768) architecture 2017-08-31 18:21:38 -05:00