Move volumetric flag to GCodeParser

This commit is contained in:
Scott Lahteine 2017-09-16 11:41:12 -05:00
parent bf7af95db3
commit 63228fc453
7 changed files with 17 additions and 21 deletions

View File

@ -169,7 +169,6 @@ static float saved_feedrate_mm_s;
int16_t feedrate_percentage = 100, saved_feedrate_percentage;
// Initialized by settings.load()
bool volumetric_enabled;
float filament_size[EXTRUDERS], volumetric_multiplier[EXTRUDERS];
#if HAS_WORKSPACE_OFFSET
@ -3295,7 +3294,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
#endif // FILAMENT_RUNOUT_SENSOR
float calculate_volumetric_multiplier(const float diameter) {
if (!volumetric_enabled || diameter == 0) return 1.0;
if (!parser.volumetric_enabled || diameter == 0) return 1.0;
return 1.0 / (M_PI * sq(diameter * 0.5));
}

View File

@ -186,7 +186,6 @@ extern int16_t feedrate_percentage;
#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01)
extern bool volumetric_enabled;
extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner

View File

@ -37,8 +37,8 @@ void GcodeSuite::M200() {
// setting any extruder filament size disables volumetric on the assumption that
// slicers either generate in extruder values as cubic mm or as as filament feeds
// for all extruders
volumetric_enabled = (parser.value_linear_units() != 0.0);
if (volumetric_enabled) {
parser.volumetric_enabled = (parser.value_linear_units() != 0.0);
if (parser.volumetric_enabled) {
filament_size[target_extruder] = parser.value_linear_units();
// make sure all extruders have some sane value for the filament size
for (uint8_t i = 0; i < COUNT(filament_size); i++)

View File

@ -35,6 +35,8 @@
// Must be declared for allocation and to satisfy the linker
// Zero values need no initialization.
bool GCodeParser::volumetric_enabled;
#if ENABLED(INCH_MODE_SUPPORT)
float GCodeParser::linear_unit_factor, GCodeParser::volumetric_unit_factor;
#endif

View File

@ -33,10 +33,6 @@
//#define DEBUG_GCODE_PARSER
#if ENABLED(INCH_MODE_SUPPORT)
extern bool volumetric_enabled;
#endif
/**
* GCode parser
*
@ -65,6 +61,8 @@ public:
// Global states for GCode-level units features
static bool volumetric_enabled;
#if ENABLED(INCH_MODE_SUPPORT)
static float linear_unit_factor, volumetric_unit_factor;
#endif

View File

@ -3445,9 +3445,9 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM_EDIT(float3, MSG_ADVANCE_K, &planner.extruder_advance_k, 0, 999);
#endif
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, calculate_volumetric_multipliers);
if (volumetric_enabled) {
if (parser.volumetric_enabled) {
#if EXTRUDERS == 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
#else // EXTRUDERS > 1

View File

@ -137,7 +137,7 @@
* 533 M208 R swap_retract_recover_feedrate_mm_s (float)
*
* Volumetric Extrusion: 21 bytes
* 537 M200 D volumetric_enabled (bool)
* 537 M200 D parser.volumetric_enabled (bool)
* 538 M200 T D filament_size (float x5) (T0..3)
*
* HAVE_TMC2130: 20 bytes
@ -185,9 +185,7 @@ MarlinSettings settings;
#include "../core/language.h"
#include "../Marlin.h"
#if ENABLED(INCH_MODE_SUPPORT) || (ENABLED(ULTIPANEL) && ENABLED(TEMPERATURE_UNITS_SUPPORT))
#include "../gcode/parser.h"
#endif
#include "../gcode/parser.h"
#if HAS_BED_PROBE
#include "../module/probe.h"
@ -511,7 +509,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(fwretract.swap_retract_recover_feedrate_mm_s);
#endif
EEPROM_WRITE(volumetric_enabled);
EEPROM_WRITE(parser.volumetric_enabled);
// Save filament sizes
for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
@ -897,7 +895,7 @@ void MarlinSettings::postprocess() {
for (uint8_t q=8; q--;) EEPROM_READ(dummy);
#endif
EEPROM_READ(volumetric_enabled);
EEPROM_READ(parser.volumetric_enabled);
for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
EEPROM_READ(dummy);
@ -1259,7 +1257,7 @@ void MarlinSettings::reset() {
fwretract.reset();
#endif
volumetric_enabled =
parser.volumetric_enabled =
#if ENABLED(VOLUMETRIC_DEFAULT_ON)
true
#else
@ -1350,7 +1348,7 @@ void MarlinSettings::reset() {
CONFIG_ECHO_START;
#if ENABLED(INCH_MODE_SUPPORT)
#define LINEAR_UNIT(N) ((N) / parser.linear_unit_factor)
#define VOLUMETRIC_UNIT(N) ((N) / (volumetric_enabled ? parser.volumetric_unit_factor : parser.linear_unit_factor))
#define VOLUMETRIC_UNIT(N) ((N) / (parser.volumetric_enabled ? parser.volumetric_unit_factor : parser.linear_unit_factor))
SERIAL_ECHOPGM(" G2");
SERIAL_CHAR(parser.linear_unit_factor == 1.0 ? '1' : '0');
SERIAL_ECHOPGM(" ; Units in ");
@ -1387,7 +1385,7 @@ void MarlinSettings::reset() {
if (!forReplay) {
CONFIG_ECHO_START;
SERIAL_ECHOPGM("Filament settings:");
if (volumetric_enabled)
if (parser.volumetric_enabled)
SERIAL_EOL();
else
SERIAL_ECHOLNPGM(" Disabled");
@ -1417,7 +1415,7 @@ void MarlinSettings::reset() {
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
if (!volumetric_enabled) {
if (!parser.volumetric_enabled) {
CONFIG_ECHO_START;
SERIAL_ECHOLNPGM(" M200 D0");
}