Extend RGB LED support, adding Printer Events

This commit is contained in:
Scott Lahteine 2017-04-04 16:26:30 -05:00
parent c7063eb55c
commit e7746ffee4
26 changed files with 812 additions and 47 deletions

View File

@ -386,5 +386,6 @@
#define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)) #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
#define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER)) #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
#define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED))
#endif //CONDITIONALS_LCD_H #endif //CONDITIONALS_LCD_H

View File

@ -1514,7 +1514,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1522,6 +1538,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -945,6 +945,31 @@ void servo_init() {
#endif #endif
#if HAS_COLOR_LEDS
void set_led_color(const uint8_t r, const uint8_t g, const uint8_t b) {
#if ENABLED(BLINKM)
// This variant uses i2c to send the RGB components to the device.
SendColors(r, g, b);
#else
// This variant uses 3 separate pins for the RGB components.
// If the pins can do PWM then their intensity will be set.
digitalWrite(RGB_LED_R_PIN, r ? HIGH : LOW);
digitalWrite(RGB_LED_G_PIN, g ? HIGH : LOW);
digitalWrite(RGB_LED_B_PIN, b ? HIGH : LOW);
analogWrite(RGB_LED_R_PIN, r);
analogWrite(RGB_LED_G_PIN, g);
analogWrite(RGB_LED_B_PIN, b);
#endif
}
#endif // HAS_COLOR_LEDS
void gcode_line_error(const char* err, bool doFlush = true) { void gcode_line_error(const char* err, bool doFlush = true) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
serialprintPGM(err); serialprintPGM(err);
@ -1129,6 +1154,19 @@ inline void get_serial_commands() {
if (card_eof) { if (card_eof) {
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
card.printingHasFinished(); card.printingHasFinished();
#if ENABLED(PRINTER_EVENT_LEDS)
LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS);
set_led_color(0, 255, 0);
#if HAS_RESUME_CONTINUE
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
while (wait_for_user) idle();
KEEPALIVE_STATE(IN_HANDLER);
#else
safe_delay(1000);
#endif
set_led_color(0, 0, 0);
#endif
card.checkautostart(true); card.checkautostart(true);
} }
else if (n == -1) { else if (n == -1) {
@ -6084,6 +6122,11 @@ inline void gcode_M109() {
KEEPALIVE_STATE(NOT_BUSY); KEEPALIVE_STATE(NOT_BUSY);
#if ENABLED(PRINTER_EVENT_LEDS)
const float start_temp = thermalManager.degHotend(target_extruder);
uint8_t old_blue = 0;
#endif
do { do {
// Target temperature might be changed during the loop // Target temperature might be changed during the loop
if (target_temp != thermalManager.degTargetHotend(target_extruder)) { if (target_temp != thermalManager.degTargetHotend(target_extruder)) {
@ -6117,6 +6160,14 @@ inline void gcode_M109() {
const float temp = thermalManager.degHotend(target_extruder); const float temp = thermalManager.degHotend(target_extruder);
#if ENABLED(PRINTER_EVENT_LEDS)
// Gradually change LED strip from violet to red as nozzle heats up
if (!wants_to_cool) {
const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0);
if (blue != old_blue) set_led_color(255, 0, (old_blue = blue));
}
#endif
#if TEMP_RESIDENCY_TIME > 0 #if TEMP_RESIDENCY_TIME > 0
const float temp_diff = fabs(target_temp - temp); const float temp_diff = fabs(target_temp - temp);
@ -6145,7 +6196,12 @@ inline void gcode_M109() {
} while (wait_for_heatup && TEMP_CONDITIONS); } while (wait_for_heatup && TEMP_CONDITIONS);
if (wait_for_heatup) LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); if (wait_for_heatup) {
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
#if ENABLED(PRINTER_EVENT_LEDS)
set_led_color(255, 255, 255); // Set LEDs ALL WHITE
#endif
}
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
} }
@ -6195,6 +6251,11 @@ inline void gcode_M109() {
target_extruder = active_extruder; // for print_heaterstates target_extruder = active_extruder; // for print_heaterstates
#if ENABLED(PRINTER_EVENT_LEDS)
const float start_temp = thermalManager.degBed();
uint8_t old_red = 255;
#endif
do { do {
// Target temperature might be changed during the loop // Target temperature might be changed during the loop
if (target_temp != thermalManager.degTargetBed()) { if (target_temp != thermalManager.degTargetBed()) {
@ -6228,6 +6289,15 @@ inline void gcode_M109() {
const float temp = thermalManager.degBed(); const float temp = thermalManager.degBed();
#if ENABLED(PRINTER_EVENT_LEDS)
// Gradually change LED strip from blue to violet as bed heats up
if (!wants_to_cool) {
const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255);
if (red != old_red) set_led_color((old_red = red), 0, 255);
}
}
#endif
#if TEMP_BED_RESIDENCY_TIME > 0 #if TEMP_BED_RESIDENCY_TIME > 0
const float temp_diff = fabs(target_temp - temp); const float temp_diff = fabs(target_temp - temp);
@ -6771,28 +6841,7 @@ inline void gcode_M121() { endstops.enable_globally(false); }
#endif // PARK_HEAD_ON_PAUSE #endif // PARK_HEAD_ON_PAUSE
#if ENABLED(BLINKM) || ENABLED(RGB_LED) #if HAS_COLOR_LEDS
void set_led_color(const uint8_t r, const uint8_t g, const uint8_t b) {
#if ENABLED(BLINKM)
// This variant uses i2c to send the RGB components to the device.
SendColors(r, g, b);
#else
// This variant uses 3 separate pins for the RGB components.
// If the pins can do PWM then their intensity will be set.
digitalWrite(RGB_LED_R_PIN, r ? HIGH : LOW);
digitalWrite(RGB_LED_G_PIN, g ? HIGH : LOW);
digitalWrite(RGB_LED_B_PIN, b ? HIGH : LOW);
analogWrite(RGB_LED_R_PIN, r);
analogWrite(RGB_LED_G_PIN, g);
analogWrite(RGB_LED_B_PIN, b);
#endif
}
/** /**
* M150: Set Status LED Color - Use R-U-B for R-G-B * M150: Set Status LED Color - Use R-U-B for R-G-B
@ -9388,7 +9437,7 @@ void process_next_command() {
break; break;
#endif #endif
#if ENABLED(BLINKM) || ENABLED(RGB_LED) #if HAS_COLOR_LEDS
case 150: // M150: Set Status LED Color case 150: // M150: Set Status LED Color
gcode_M150(); gcode_M150();

View File

@ -957,6 +957,8 @@ static_assert(1 >= 0
#elif ENABLED(BLINKM) #elif ENABLED(BLINKM)
#error "RGB_LED and BLINKM are currently incompatible (both use M150)." #error "RGB_LED and BLINKM are currently incompatible (both use M150)."
#endif #endif
#elif DISABLED(BLINKM) && ENABLED(PRINTER_EVENT_LEDS)
#error "PRINTER_EVENT_LEDS requires BLINKM or RGB_LED."
#endif #endif
/** /**

View File

@ -1513,7 +1513,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1521,6 +1537,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1497,7 +1497,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1505,6 +1521,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1497,7 +1497,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1505,6 +1521,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1505,7 +1505,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1513,6 +1529,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1508,7 +1508,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1516,6 +1532,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1548,7 +1548,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1556,6 +1572,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1514,7 +1514,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1522,6 +1538,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1514,7 +1514,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1522,6 +1538,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1514,7 +1514,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1522,6 +1538,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1515,7 +1515,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1523,6 +1539,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1529,7 +1529,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1537,6 +1553,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1534,7 +1534,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1542,6 +1558,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1570,7 +1570,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1578,6 +1594,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1505,7 +1505,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1513,6 +1529,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1514,7 +1514,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1522,6 +1538,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1630,7 +1630,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1638,6 +1654,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1616,7 +1616,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1624,6 +1640,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1612,7 +1612,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1620,6 +1636,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1620,7 +1620,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1628,6 +1644,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1627,7 +1627,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1635,6 +1651,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1517,7 +1517,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1525,6 +1541,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas

View File

@ -1510,7 +1510,23 @@
//define BlinkM/CyzRgb Support //define BlinkM/CyzRgb Support
//#define BLINKM //#define BLINKM
// Support for an RGB LED using 3 separate pins with optional PWM /**
* RGB LED / LED Strip Control
*
* Enable support for an RGB LED connected to 5V digital pins, or
* an RGB Strip connected to MOSFETs controlled by digital pins.
*
* Adds the M150 command to set the LED (or LED strip) color.
* If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
* luminance values can be set from 0 to 255.
*
* *** CAUTION ***
* LED Strips require a MOFSET Chip between PWM lines and LEDs,
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* *** CAUTION ***
*
*/
//#define RGB_LED //#define RGB_LED
#if ENABLED(RGB_LED) #if ENABLED(RGB_LED)
#define RGB_LED_R_PIN 34 #define RGB_LED_R_PIN 34
@ -1518,6 +1534,21 @@
#define RGB_LED_B_PIN 35 #define RGB_LED_B_PIN 35
#endif #endif
/**
* Printer Event LEDs
*
* During printing, the LEDs will reflect the printer status:
*
* - Gradually change from blue to violet as the heated bed gets to target temp
* - Gradually change from violet to red as the hotend gets to temperature
* - Change to white to illuminate work surface
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED)
#define PRINTER_EVENT_LEDS
#endif
/*********************************************************************\ /*********************************************************************\
* R/C SERVO support * R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas * Sponsored by TrinityLabs, Reworked by codexmas