From e7746ffee4e6cf47b38f5e424cd38ed1ccb88d97 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 4 Apr 2017 16:26:30 -0500 Subject: [PATCH] Extend RGB LED support, adding Printer Events --- Marlin/Conditionals_LCD.h | 1 + Marlin/Configuration.h | 33 ++++++- Marlin/Marlin_main.cpp | 97 ++++++++++++++----- Marlin/SanityCheck.h | 2 + .../Cartesio/Configuration.h | 33 ++++++- .../Felix/Configuration.h | 33 ++++++- .../Felix/DUAL/Configuration.h | 33 ++++++- .../Hephestos/Configuration.h | 33 ++++++- .../Hephestos_2/Configuration.h | 33 ++++++- .../K8200/Configuration.h | 33 ++++++- .../K8400/Configuration.h | 33 ++++++- .../K8400/Dual-head/Configuration.h | 33 ++++++- .../RepRapWorld/Megatronics/Configuration.h | 33 ++++++- .../RigidBot/Configuration.h | 33 ++++++- .../SCARA/Configuration.h | 33 ++++++- .../TAZ4/Configuration.h | 33 ++++++- .../TinyBoy2/Configuration.h | 33 ++++++- .../WITBOX/Configuration.h | 33 ++++++- .../adafruit/ST7565/Configuration.h | 33 ++++++- .../delta/flsun_kossel_mini/Configuration.h | 33 ++++++- .../delta/generic/Configuration.h | 33 ++++++- .../delta/kossel_mini/Configuration.h | 33 ++++++- .../delta/kossel_pro/Configuration.h | 33 ++++++- .../delta/kossel_xl/Configuration.h | 33 ++++++- .../makibox/Configuration.h | 33 ++++++- .../tvrrug/Round2/Configuration.h | 33 ++++++- 26 files changed, 812 insertions(+), 47 deletions(-) diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h index 4b23ea3e9d..356a61bbec 100644 --- a/Marlin/Conditionals_LCD.h +++ b/Marlin/Conditionals_LCD.h @@ -386,5 +386,6 @@ #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)) #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER)) + #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED)) #endif //CONDITIONALS_LCD_H diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e17a2db8a0..4152d7d33e 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1514,7 +1514,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1522,6 +1538,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 7500abac57..64c0bbe368 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -945,6 +945,31 @@ void servo_init() { #endif +#if HAS_COLOR_LEDS + + void set_led_color(const uint8_t r, const uint8_t g, const uint8_t b) { + + #if ENABLED(BLINKM) + + // This variant uses i2c to send the RGB components to the device. + SendColors(r, g, b); + + #else + + // This variant uses 3 separate pins for the RGB components. + // If the pins can do PWM then their intensity will be set. + digitalWrite(RGB_LED_R_PIN, r ? HIGH : LOW); + digitalWrite(RGB_LED_G_PIN, g ? HIGH : LOW); + digitalWrite(RGB_LED_B_PIN, b ? HIGH : LOW); + analogWrite(RGB_LED_R_PIN, r); + analogWrite(RGB_LED_G_PIN, g); + analogWrite(RGB_LED_B_PIN, b); + + #endif + } + +#endif // HAS_COLOR_LEDS + void gcode_line_error(const char* err, bool doFlush = true) { SERIAL_ERROR_START; serialprintPGM(err); @@ -1129,6 +1154,19 @@ inline void get_serial_commands() { if (card_eof) { SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); card.printingHasFinished(); + #if ENABLED(PRINTER_EVENT_LEDS) + LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS); + set_led_color(0, 255, 0); + #if HAS_RESUME_CONTINUE + KEEPALIVE_STATE(PAUSED_FOR_USER); + wait_for_user = true; + while (wait_for_user) idle(); + KEEPALIVE_STATE(IN_HANDLER); + #else + safe_delay(1000); + #endif + set_led_color(0, 0, 0); + #endif card.checkautostart(true); } else if (n == -1) { @@ -6084,6 +6122,11 @@ inline void gcode_M109() { KEEPALIVE_STATE(NOT_BUSY); + #if ENABLED(PRINTER_EVENT_LEDS) + const float start_temp = thermalManager.degHotend(target_extruder); + uint8_t old_blue = 0; + #endif + do { // Target temperature might be changed during the loop if (target_temp != thermalManager.degTargetHotend(target_extruder)) { @@ -6117,6 +6160,14 @@ inline void gcode_M109() { const float temp = thermalManager.degHotend(target_extruder); + #if ENABLED(PRINTER_EVENT_LEDS) + // Gradually change LED strip from violet to red as nozzle heats up + if (!wants_to_cool) { + const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0); + if (blue != old_blue) set_led_color(255, 0, (old_blue = blue)); + } + #endif + #if TEMP_RESIDENCY_TIME > 0 const float temp_diff = fabs(target_temp - temp); @@ -6145,7 +6196,12 @@ inline void gcode_M109() { } while (wait_for_heatup && TEMP_CONDITIONS); - if (wait_for_heatup) LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); + if (wait_for_heatup) { + LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); + #if ENABLED(PRINTER_EVENT_LEDS) + set_led_color(255, 255, 255); // Set LEDs ALL WHITE + #endif + } KEEPALIVE_STATE(IN_HANDLER); } @@ -6195,6 +6251,11 @@ inline void gcode_M109() { target_extruder = active_extruder; // for print_heaterstates + #if ENABLED(PRINTER_EVENT_LEDS) + const float start_temp = thermalManager.degBed(); + uint8_t old_red = 255; + #endif + do { // Target temperature might be changed during the loop if (target_temp != thermalManager.degTargetBed()) { @@ -6228,6 +6289,15 @@ inline void gcode_M109() { const float temp = thermalManager.degBed(); + #if ENABLED(PRINTER_EVENT_LEDS) + // Gradually change LED strip from blue to violet as bed heats up + if (!wants_to_cool) { + const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255); + if (red != old_red) set_led_color((old_red = red), 0, 255); + } + } + #endif + #if TEMP_BED_RESIDENCY_TIME > 0 const float temp_diff = fabs(target_temp - temp); @@ -6771,28 +6841,7 @@ inline void gcode_M121() { endstops.enable_globally(false); } #endif // PARK_HEAD_ON_PAUSE -#if ENABLED(BLINKM) || ENABLED(RGB_LED) - - void set_led_color(const uint8_t r, const uint8_t g, const uint8_t b) { - - #if ENABLED(BLINKM) - - // This variant uses i2c to send the RGB components to the device. - SendColors(r, g, b); - - #else - - // This variant uses 3 separate pins for the RGB components. - // If the pins can do PWM then their intensity will be set. - digitalWrite(RGB_LED_R_PIN, r ? HIGH : LOW); - digitalWrite(RGB_LED_G_PIN, g ? HIGH : LOW); - digitalWrite(RGB_LED_B_PIN, b ? HIGH : LOW); - analogWrite(RGB_LED_R_PIN, r); - analogWrite(RGB_LED_G_PIN, g); - analogWrite(RGB_LED_B_PIN, b); - - #endif - } +#if HAS_COLOR_LEDS /** * M150: Set Status LED Color - Use R-U-B for R-G-B @@ -9388,7 +9437,7 @@ void process_next_command() { break; #endif - #if ENABLED(BLINKM) || ENABLED(RGB_LED) + #if HAS_COLOR_LEDS case 150: // M150: Set Status LED Color gcode_M150(); diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 0a36616d15..3464abe922 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -957,6 +957,8 @@ static_assert(1 >= 0 #elif ENABLED(BLINKM) #error "RGB_LED and BLINKM are currently incompatible (both use M150)." #endif +#elif DISABLED(BLINKM) && ENABLED(PRINTER_EVENT_LEDS) + #error "PRINTER_EVENT_LEDS requires BLINKM or RGB_LED." #endif /** diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 62d6d8170d..9d2bc2a339 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -1513,7 +1513,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1521,6 +1537,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 71b26a7f1e..2b670d4e04 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -1497,7 +1497,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1505,6 +1521,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 59e5faeab2..f5299dea1c 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -1497,7 +1497,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1505,6 +1521,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index fef9f3657a..9b5a049385 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -1505,7 +1505,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1513,6 +1529,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 2d4abfda9a..9af69e5786 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -1508,7 +1508,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1516,6 +1532,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 2bebbd6481..747096f6ba 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1548,7 +1548,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1556,6 +1572,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 0b95474535..89e4334126 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -1514,7 +1514,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1522,6 +1538,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 63c3036e6d..677ee815d4 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -1514,7 +1514,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1522,6 +1538,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index f5e44da8ba..48c9ed6190 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -1514,7 +1514,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1522,6 +1538,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index a7f1bb8f2e..0d35e7a519 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -1515,7 +1515,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1523,6 +1539,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 29352b0dae..fac1e5109f 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -1529,7 +1529,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1537,6 +1553,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 03100e59c2..9b4d171391 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -1534,7 +1534,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1542,6 +1558,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index ce24a344ed..4ac0360691 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -1570,7 +1570,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1578,6 +1594,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 7c69e1b1eb..46dd900e80 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -1505,7 +1505,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1513,6 +1529,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 55fde5dc67..565d6eeffc 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -1514,7 +1514,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1522,6 +1538,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h index 0aeef6f293..add835d340 100644 --- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h @@ -1630,7 +1630,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1638,6 +1654,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 6ea0062ada..2ea7d06bdf 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1616,7 +1616,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1624,6 +1640,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index ebd147e1f1..ddcba6c0d6 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1612,7 +1612,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1620,6 +1636,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 39222a3275..15afad44b0 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1620,7 +1620,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1628,6 +1644,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index f269fe7f4d..d39454e442 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1627,7 +1627,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1635,6 +1651,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 39faa4ce46..1f642c46f2 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -1517,7 +1517,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1525,6 +1541,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 9b90db90b0..e51ddf2c67 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -1510,7 +1510,23 @@ //define BlinkM/CyzRgb Support //#define BLINKM -// Support for an RGB LED using 3 separate pins with optional PWM +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * *** CAUTION *** + * + */ //#define RGB_LED #if ENABLED(RGB_LED) #define RGB_LED_R_PIN 34 @@ -1518,6 +1534,21 @@ #define RGB_LED_B_PIN 35 #endif +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) + #define PRINTER_EVENT_LEDS +#endif + /*********************************************************************\ * R/C SERVO support * Sponsored by TrinityLabs, Reworked by codexmas