🎨 Misc. cleanup, comments

This commit is contained in:
Scott Lahteine 2022-01-06 05:07:47 -06:00 committed by Scott Lahteine
parent 2690bb1bc2
commit d7b7b570c7
10 changed files with 45 additions and 53 deletions

View File

@ -390,7 +390,7 @@
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
#endif
#if EITHER(AUTO_POWER_CONTROL, POWER_OFF_WAIT_FOR_COOLDOWN)
#if EITHER(AUTO_POWER_CONTROL, POWER_OFF_WAIT_FOR_COOLDOWN)
//#define AUTO_POWER_E_TEMP 50 // (°C) PSU on if any extruder is over this temperature
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) PSU on if the chamber is over this temperature
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) PSU on if the cooler is over this temperature

View File

@ -194,11 +194,11 @@ void EasythreedUI::printButton() {
print_key_flag = PF_START;
return; // Bail out
}
card.ls(); // List all files to serial output
const uint16_t filecnt = card.countFilesInWorkDir(); // Count printable files in cwd
if (filecnt == 0) return; // None are printable?
card.selectFileByIndex(filecnt); // Select the last file according to current sort options
card.openAndPrintFile(card.filename); // Start printing it
card.ls(); // List all files to serial output
const uint16_t filecnt = card.countFilesInWorkDir(); // Count printable files in cwd
if (filecnt == 0) return; // None are printable?
card.selectFileByIndex(filecnt); // Select the last file according to current sort options
card.openAndPrintFile(card.filename); // Start printing it
break;
}
case PF_PAUSE: { // Pause printing (not currently firing)

View File

@ -36,7 +36,7 @@ class Power {
static void init();
static void power_on();
static void power_off();
#if EITHER(POWER_OFF_TIMER, POWER_OFF_WAIT_FOR_COOLDOWN)
#if ENABLED(POWER_OFF_TIMER)
static millis_t power_off_time;

View File

@ -290,6 +290,9 @@ G29_TYPE GcodeSuite::G29() {
ry = RAW_Y_POSITION(parser.linearval('Y', NAN));
int8_t i = parser.byteval('I', -1), j = parser.byteval('J', -1);
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
if (!isnan(rx) && !isnan(ry)) {
// Get nearest i / j from rx / ry
i = (rx - bilinear_start.x + 0.5 * abl.gridSpacing.x) / abl.gridSpacing.x;
@ -297,6 +300,9 @@ G29_TYPE GcodeSuite::G29() {
LIMIT(i, 0, (GRID_MAX_POINTS_X) - 1);
LIMIT(j, 0, (GRID_MAX_POINTS_Y) - 1);
}
#pragma GCC diagnostic pop
if (WITHIN(i, 0, (GRID_MAX_POINTS_X) - 1) && WITHIN(j, 0, (GRID_MAX_POINTS_Y) - 1)) {
set_bed_leveling_enabled(false);
z_values[i][j] = rz;

View File

@ -2762,7 +2762,10 @@ void HMI_Prepare() {
#endif
#if HAS_HOTEND || HAS_HEATED_BED
case PREPARE_CASE_COOL: thermalManager.cooldown(); break;
case PREPARE_CASE_COOL:
thermalManager.cooldown();
ui.reset_status();
break;
#endif
case PREPARE_CASE_LANG:

View File

@ -79,7 +79,7 @@ uint8_t TouchButtons::read_buttons() {
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
const calibrationState state = touch_calibration.get_calibration_state();
if (state >= CALIBRATION_TOP_LEFT && state <= CALIBRATION_BOTTOM_RIGHT) {
if (WITHIN(state, CALIBRATION_TOP_LEFT, CALIBRATION_BOTTOM_RIGHT)) {
if (touch_calibration.handleTouch(x, y)) ui.refresh();
return 0;
}

View File

@ -593,9 +593,6 @@ void _O2 Endstops::report_states() {
} // Endstops::report_states
// The following routines are called from an ISR context. It could be the temperature ISR, the
// endstop ISR or the Stepper ISR.
#if HAS_DELTA_SENSORLESS_PROBING
#define __ENDSTOP(AXIS, ...) AXIS ##_MAX
#define _ENDSTOP_PIN(AXIS, ...) AXIS ##_MAX_PIN
@ -607,13 +604,18 @@ void _O2 Endstops::report_states() {
#endif
#define _ENDSTOP(AXIS, MINMAX) __ENDSTOP(AXIS, MINMAX)
// Check endstops - Could be called from Temperature ISR!
/**
* Called from interrupt context by the Endstop ISR or Stepper ISR!
* Read endstops to get their current states, register hits for all
* axes moving in the direction of their endstops, and abort moves.
*/
void Endstops::update() {
#if !ENDSTOP_NOISE_THRESHOLD
if (!abort_enabled()) return;
#if !ENDSTOP_NOISE_THRESHOLD // If not debouncing...
if (!abort_enabled()) return; // ...and not enabled, exit.
#endif
// Macros to update / copy the live_state
#define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
#define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT))
@ -1107,6 +1109,7 @@ void Endstops::update() {
#if ENABLED(SPI_ENDSTOPS)
// Called from idle() to read Trinamic stall states
bool Endstops::tmc_spi_homing_check() {
bool hit = false;
#if X_SPI_SENSORLESS

View File

@ -2346,13 +2346,9 @@ uint32_t Stepper::block_phase_isr() {
#endif
#endif // LASER_POWER_INLINE
// At this point, we must ensure the movement about to execute isn't
// trying to force the head against a limit switch. If using interrupt-
// driven change detection, and already against a limit then no call to
// the endstop_triggered method will be done and the movement will be
// done against the endstop. So, check the limits here: If the movement
// is against the limits, the block will be marked as to be killed, and
// on the next call to this ISR, will be discarded.
// If the endstop is already pressed, endstop interrupts won't invoke
// endstop_triggered and the move will grind. So check here for a
// triggered endstop, which marks the block for discard on the next ISR.
endstops.update();
#if ENABLED(Z_LATE_ENABLE)

View File

@ -271,9 +271,8 @@ void CardReader::selectByName(SdFile dir, const char * const match) {
* good addition.
*/
void CardReader::printListing(
SdFile parent
SdFile parent, const char * const prepend
OPTARG(LONG_FILENAME_HOST_SUPPORT, const bool includeLongNames/*=false*/)
, const char * const prepend/*=nullptr*/
OPTARG(LONG_FILENAME_HOST_SUPPORT, const char * const prependLong/*=nullptr*/)
) {
dir_t p;
@ -283,61 +282,47 @@ void CardReader::printListing(
size_t lenPrepend = prepend ? strlen(prepend) + 1 : 0;
// Allocate enough stack space for the full path including / separator
char path[lenPrepend + FILENAME_LENGTH];
if (prepend) {
strcpy(path, prepend);
path[lenPrepend - 1] = '/';
}
if (prepend) { strcpy(path, prepend); path[lenPrepend - 1] = '/'; }
char* dosFilename = path + lenPrepend;
createFilename(dosFilename, p);
// Get a new directory object using the full path
// and dive recursively into it.
SdFile child; // child.close() in destructor
if (child.open(&parent, dosFilename, O_READ))
if (child.open(&parent, dosFilename, O_READ)) {
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
if (includeLongNames) {
size_t lenPrependLong = prependLong ? strlen(prependLong) + 1 : 0;
// Allocate enough stack space for the full long path including / separator
char pathLong[lenPrependLong + strlen(longFilename) + 1];
if (prependLong) {
strcpy(pathLong, prependLong);
pathLong[lenPrependLong - 1] = '/';
}
if (prependLong) { strcpy(pathLong, prependLong); pathLong[lenPrependLong - 1] = '/'; }
strcpy(pathLong + lenPrependLong, longFilename);
printListing(child, true, path, pathLong);
printListing(child, path, true, pathLong);
}
else
printListing(child, false, path);
printListing(child, path);
#else
printListing(child, path);
#endif
}
else {
SERIAL_ECHO_MSG(STR_SD_CANT_OPEN_SUBDIR, dosFilename);
return;
}
}
else if (is_dir_or_gcode(p)) {
if (prepend) {
SERIAL_ECHO(prepend);
SERIAL_CHAR('/');
}
if (prepend) { SERIAL_ECHO(prepend); SERIAL_CHAR('/'); }
SERIAL_ECHO(createFilename(filename, p));
SERIAL_CHAR(' ');
SERIAL_ECHO(p.fileSize);
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
if (!includeLongNames)
#endif
SERIAL_ECHOLN(p.fileSize);
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
else {
SERIAL_ECHO(p.fileSize);
if (includeLongNames) {
SERIAL_CHAR(' ');
if (prependLong) {
SERIAL_ECHO(prependLong);
SERIAL_CHAR('/');
}
SERIAL_ECHOLN(longFilename[0] ? longFilename : "???");
if (prependLong) { SERIAL_ECHO(prependLong); SERIAL_CHAR('/'); }
SERIAL_ECHO(longFilename[0] ? longFilename : "???");
}
#endif
SERIAL_EOL();
}
}
}
@ -348,7 +333,7 @@ void CardReader::printListing(
void CardReader::ls(TERN_(LONG_FILENAME_HOST_SUPPORT, bool includeLongNames/*=false*/)) {
if (flag.mounted) {
root.rewind();
printListing(root OPTARG(LONG_FILENAME_HOST_SUPPORT, includeLongNames));
printListing(root, nullptr OPTARG(LONG_FILENAME_HOST_SUPPORT, includeLongNames));
}
}

View File

@ -336,9 +336,8 @@ private:
static void selectByIndex(SdFile dir, const uint8_t index);
static void selectByName(SdFile dir, const char * const match);
static void printListing(
SdFile parent
SdFile parent, const char * const prepend
OPTARG(LONG_FILENAME_HOST_SUPPORT, const bool includeLongNames=false)
, const char * const prepend=nullptr
OPTARG(LONG_FILENAME_HOST_SUPPORT, const char * const prependLong=nullptr)
);