Fix HAL/STM32 FastIO for analog pins (#19735)

This commit is contained in:
Serhiy-K 2020-10-17 00:21:21 +03:00 committed by Scott Lahteine
parent 28a9708ddb
commit cc7fbabc96
2 changed files with 9 additions and 11 deletions

View File

@ -51,15 +51,15 @@ void FastIO_init(); // Must be called before using fast io macros
#if defined(STM32F0xx) || defined(STM32F1xx) || defined(STM32F3xx) || defined(STM32L0xx) || defined(STM32L4xx)
#define _WRITE(IO, V) do { \
if (V) FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO])) ; \
else FastIOPortMap[STM_PORT(digitalPin[IO])]->BRR = _BV32(STM_PIN(digitalPin[IO])) ; \
if (V) FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
else FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
}while(0)
#else
#define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO]) + ((V) ? 0 : 16)))
#define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO)) + ((V) ? 0 : 16)))
#endif
#define _READ(IO) bool(READ_BIT(FastIOPortMap[STM_PORT(digitalPin[IO])]->IDR, _BV32(STM_PIN(digitalPin[IO]))))
#define _TOGGLE(IO) (FastIOPortMap[STM_PORT(digitalPin[IO])]->ODR ^= _BV32(STM_PIN(digitalPin[IO])))
#define _READ(IO) bool(READ_BIT(FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->IDR, _BV32(STM_PIN(digitalPinToPinName(IO)))))
#define _TOGGLE(IO) (FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->ODR ^= _BV32(STM_PIN(digitalPinToPinName(IO))))
#define _GET_MODE(IO)
#define _SET_MODE(IO,M) pinMode(IO, M)

View File

@ -51,8 +51,8 @@
* It contains:
* - name of the signal
* - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines.
* EXAMPLE: "#define KILL_PIN PB1" results in Ard_num of 57. 57 is then used as an
* index into digitalPin[] to get the Port_pin number
* EXAMPLE: "#define KILL_PIN PB1" results in Ard_num of 57. 57 is then used as the
* argument to digitalPinToPinName(IO) to get the Port_pin number
* - if it is a digital or analog signal. PWMs are considered digital here.
*
* pin_xref is a structure generated by this header file. It is generated by the
@ -68,8 +68,6 @@
* signal. The Arduino pin number is listed by the M43 I command.
*/
extern const PinName digitalPin[]; // provided by the platform
////////////////////////////////////////////////////////
//
// make a list of the Arduino pin numbers in the Port/Pin order
@ -137,7 +135,7 @@ const XrefInfo pin_xref[] PROGMEM = {
uint8_t get_pin_mode(const pin_t Ard_num) {
uint32_t mode_all = 0;
const PinName dp = digitalPin[Ard_num];
const PinName dp = digitalPinToPinName(Ard_num);
switch (PORT_ALPHA(dp)) {
case 'A' : mode_all = GPIOA->MODER; break;
case 'B' : mode_all = GPIOB->MODER; break;
@ -218,7 +216,7 @@ bool pwm_status(const pin_t Ard_num) {
void pwm_details(const pin_t Ard_num) {
if (pwm_status(Ard_num)) {
uint32_t alt_all = 0;
const PinName dp = digitalPin[Ard_num];
const PinName dp = digitalPinToPinName(Ard_num);
pin_t pin_number = uint8_t(PIN_NUM(dp));
const bool over_7 = pin_number >= 8;
const uint8_t ind = over_7 ? 1 : 0;