bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Pins, comment cleanup

Browse Source
This commit is contained in:
Scott Lahteine 2020-12-28 23:10:48 -06:00 committed by Scott Lahteine
parent f539e319f0
commit c3dc74bba0
13 changed files with 62 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/src/inc/Conditionals_LCD.h
View File

@ -833,6 +833,7 @@
#else
// Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef USE_PROBE_FOR_Z_HOMING
#endif
#if Z_HOME_DIR > 0

4
Marlin/src/inc/Conditionals_adv.h
View File

@ -382,6 +382,10 @@
#define POLL_JOG
#endif
#ifndef HOMING_BUMP_MM
#define HOMING_BUMP_MM { 0, 0, 0 }
#endif
/**
* Driver Timings (in nanoseconds)
* NOTE: Driver timing order is longest-to-shortest duration.

2
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View File

@ -189,7 +189,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors

10
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View File

@ -40,7 +40,6 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
//
@ -59,6 +58,11 @@
//
#define SPI_DEVICE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -155,7 +159,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors
@ -200,8 +204,6 @@
#define FIL_RUNOUT_PIN PA4
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH
//#define LED_PIN PB2
//

7
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
View File

@ -56,6 +56,11 @@
#define SPI_DEVICE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -148,8 +153,6 @@
#define FIL_RUNOUT2_PIN PE6
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH support
//#define LED_PIN PB2
//

10
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View File

@ -43,7 +43,6 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
#define DISABLE_DEBUG
//
@ -62,6 +61,11 @@
//
#define SPI_DEVICE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -163,7 +167,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors
@ -218,8 +222,6 @@
#define FIL_RUNOUT2_PIN PE6
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH
//#define LED_PIN PB2
//

2
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
View File

@ -48,7 +48,7 @@
//
// Servos
//
#define SERVO0_PIN PA8 // BLTOUCH
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches

27
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
View File

@ -31,8 +31,11 @@
#define BOARD_INFO_NAME "MKS Robin Nano V3"
// USB Flash Drive support
#define HAS_OTG_USB_HOST_SUPPORT
// Avoid conflict with TIMER_TONE
#define STEP_TIMER 10
#define STEP_TIMER 10
// Use one of these or SDCard-based Emulation will be used
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
@ -42,6 +45,12 @@
//
// Release PB4 (Z_DIR_PIN) from JTAG NRST role
//
//#define DISABLE_DEBUG
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
@ -98,8 +107,8 @@
//
// Software SPI pins for TMC2130 stepper drivers
// This board only supports SW SPI for stepper drivers
//
// This board only support SW SPI for stepper drivers
#if HAS_TMC_SPI
#define TMC_USE_SW_SPI
#endif
@ -179,6 +188,7 @@
#define POWER_LOSS_PIN PW_DET
#define PS_ON_PIN PW_OFF
//
// Enable MKSPWC support
//
@ -186,14 +196,13 @@
//#define KILL_PIN PA2
//#define KILL_PIN_INVERTING true
#define SERVO0_PIN PA8 // Enable BLTOUCH support
//#define LED_PIN PB2
// Random Info
#define USB_SERIAL -1 //Usb Serial
#define WIFI_SERIAL 3 //USART3
#define MKS_WIFI_MODULE_SERIAL 1 //USART1
#define MKS_WIFI_MODULE_SPI 2 //SPI2
#define USB_SERIAL -1 // USB Serial
#define WIFI_SERIAL 3 // USART3
#define MKS_WIFI_MODULE_SERIAL 1 // USART1
#define MKS_WIFI_MODULE_SPI 2 // SPI2
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
@ -331,7 +340,7 @@
//#define MKS_LCD12864B
//#undef SHOW_BOOTSCREEN
#else // !MKS_MINI_12864
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14
#if ENABLED(ULTIPANEL)
@ -346,5 +355,3 @@
#endif // !MKS_MINI_12864
#endif // HAS_SPI_LCD
#define HAS_OTG_USB_HOST_SUPPORT

29
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
View File

@ -30,7 +30,7 @@
#define BOARD_INFO_NAME "MKS Robin PRO V2"
// Avoid conflict with TIMER_TONE
#define STEP_TIMER 10
#define STEP_TIMER 10
// Use one of these or SDCard-based Emulation will be used
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
@ -40,12 +40,18 @@
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
//
//#define DISABLE_DEBUG
//
// Note: MKS Robin board is using SPI2 interface.
//
//#define SPI_MODULE 2
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
@ -55,8 +61,6 @@
#define E0_DIAG_PIN PC4
#define E1_DIAG_PIN PE7
//
#define X_STOP_PIN PA15
#define Y_STOP_PIN PA12
#define Z_MIN_PIN PA11
@ -159,7 +163,7 @@
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209
#endif // HAS_TMC_UART
//
// Temperature Sensors
@ -186,19 +190,18 @@
//
// Misc. Functions
//
// #define POWER_LOSS_PIN PA2 // PW_DET
// #define PS_ON_PIN PA3 // PW_OFF
// #define SUICIDE_PIN PB2 // Enable MKSPWC support
// #define KILL_PIN PA2 // Enable MKSPWC support
// #define KILL_PIN_INVERTING true // Enable MKSPWC support
#define SERVO0_PIN PA8 // Enable BLTOUCH support
//#define POWER_LOSS_PIN PA2 // PW_DET
//#define PS_ON_PIN PA3 // PW_OFF
//#define SUICIDE_PIN PB2 // Enable MKSPWC support
//#define KILL_PIN PA2 // Enable MKSPWC support
//#define KILL_PIN_INVERTING true // Enable MKSPWC support
//#define LED_PIN PB2
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
// #define USE_NEW_SPI_API 1
//#define USE_NEW_SPI_API 1
//
// Onboard SD card
@ -243,7 +246,7 @@
//
// LCD / Controller
#define SPI_FLASH
#define HAS_SPI_FLASH 1
#define HAS_SPI_FLASH 1
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#if ENABLED(SPI_FLASH)
@ -316,7 +319,7 @@
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
// #define TFT_DRIVER ST7796
//#define TFT_DRIVER ST7796
#define TFT_BUFFER_SIZE 14400
#elif HAS_SPI_LCD

5
Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h
View File

@ -36,7 +36,7 @@
// Decrease delays and flash wear by spreading writes across the
// 128 kB sector allocated for EEPROM emulation.
// Not yet supported on F7 hardware
// #define FLASH_EEPROM_LEVELING
//#define FLASH_EEPROM_LEVELING
#endif
/**
@ -188,9 +188,6 @@
#define LCD_PINS_RS PF12 // LCD_RS
#define LCD_PINS_ENABLE PD15 // LCD_EN
#define LCD_PINS_D4 PB13 // LCD_D4
// #define LCD_PINS_D5
// #define LCD_PINS_D6
// #define LCD_PINS_D7
#define BTN_EN1 PF13 // BTN_EN1
#define BTN_EN2 PE9 // BTN_EN2

2
buildroot/share/PlatformIO/variants/BIGTREE_GTR_V1/hal_conf_extra.h
View File

@ -44,7 +44,7 @@
#undef HAL_IRDA_MODULE_ENABLED
#undef HAL_SMARTCARD_MODULE_ENABLED
#undef HAL_WWDG_MODULE_ENABLED
#undef HAL_HCD_MODULE_ENABLED
//#undef HAL_HCD_MODULE_ENABLED
#undef HAL_FMPI2C_MODULE_ENABLED
#undef HAL_SPDIFRX_MODULE_ENABLED
#undef HAL_DFSDM_MODULE_ENABLED

2
buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h
View File

@ -44,7 +44,7 @@
#undef HAL_IRDA_MODULE_ENABLED
#undef HAL_SMARTCARD_MODULE_ENABLED
#undef HAL_WWDG_MODULE_ENABLED
#undef HAL_HCD_MODULE_ENABLED
//#undef HAL_HCD_MODULE_ENABLED
#undef HAL_FMPI2C_MODULE_ENABLED
#undef HAL_SPDIFRX_MODULE_ENABLED
#undef HAL_DFSDM_MODULE_ENABLED

5
buildroot/tests/STM32F103VE_longer-tests
View File

@ -11,9 +11,8 @@ opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "CLASSIC_UI U20 config" "$3"
use_example_configs Alfawise/U20
opt_enable BAUD_RATE_GCODE
opt_enable TFT_COLOR_UI
opt_disable TFT_CLASSIC_UI
opt_enable BAUD_RATE_GCODE TFT_COLOR_UI
opt_disable TFT_CLASSIC_UI CUSTOM_STATUS_SCREEN_IMAGE
exec_test $1 $2 "COLOR_UI U20 config" "$3"
use_example_configs Alfawise/U20-bltouch