bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ Update/extend Quiet Probing (#22205)

Browse Source
This commit is contained in:
cr20-123 2021-06-26 14:17:18 -04:00 committed by Scott Lahteine
parent 0fbd8c52bb
commit b1bcb387fa
4 changed files with 20 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/Configuration.h
View File

@ -1248,7 +1248,8 @@
//#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude)
#endif
//#define PROBING_FANS_OFF // Turn fans off when probing
//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
//#define PROBING_ESTEPPERS_OFF // Turn all extruder steppers off when probing
//#define PROBING_STEPPERS_OFF // Turn all steppers off (unless needed to hold position) when probing (including extruders)
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
// Require minimum nozzle and/or bed temperature for probing

19
Marlin/src/inc/Conditionals_post.h
View File

@ -3099,6 +3099,7 @@
#endif
#else
#undef NOZZLE_TO_PROBE_OFFSET
#undef PROBING_STEPPERS_OFF
#endif
/**
@ -3141,18 +3142,26 @@
/**
* Heater, Fan, and Probe interactions
*/
#if FAN_COUNT == 0
#undef PROBING_FANS_OFF
#if !HAS_FAN
#undef ADAPTIVE_FAN_SLOWING
#undef NO_FAN_SLOWING_IN_PID_TUNING
#endif
#if HAS_BED_PROBE && (EITHER(PROBING_HEATERS_OFF, PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0)
#define HAS_QUIET_PROBING 1
#if !BOTH(HAS_BED_PROBE, HAS_FAN)
#undef PROBING_FANS_OFF
#endif
#if !BOTH(HAS_BED_PROBE, HAS_EXTRUDERS)
#undef PROBING_ESTEPPERS_OFF
#endif
#if BOTH(PROBING_STEPPERS_OFF, PROBING_ESTEPPERS_OFF)
#undef PROBING_ESTEPPERS_OFF
#warning "PROBING_STEPPERS_OFF includes PROBING_ESTEPPERS_OFF. Disabling PROBING_ESTEPPERS_OFF."
#endif
#if EITHER(ADVANCED_PAUSE_FEATURE, PROBING_HEATERS_OFF)
#define HEATER_IDLE_HANDLER 1
#endif
#if HAS_BED_PROBE && (ANY(PROBING_HEATERS_OFF, PROBING_STEPPERS_OFF, PROBING_ESTEPPERS_OFF, PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0)
#define HAS_QUIET_PROBING 1
#endif
/**
* Advanced Pause - Filament Change

3
Marlin/src/module/probe.cpp
View File

@ -245,6 +245,7 @@ xyz_pos_t Probe::offset; // Initialized by settings.load()
void Probe::set_probing_paused(const bool dopause) {
TERN_(PROBING_HEATERS_OFF, thermalManager.pause_heaters(dopause));
TERN_(PROBING_FANS_OFF, thermalManager.set_fans_paused(dopause));
TERN_(PROBING_ESTEPPERS_OFF, if (dopause) disable_e_steppers());
#if ENABLED(PROBING_STEPPERS_OFF)
IF_DISABLED(DELTA, static uint8_t old_trusted);
if (dopause) {
@ -253,7 +254,7 @@ xyz_pos_t Probe::offset; // Initialized by settings.load()
DISABLE_AXIS_X();
DISABLE_AXIS_Y();
#endif
disable_e_steppers();
IF_DISABLED(PROBING_ESTEPPERS_OFF, disable_e_steppers());
}
else {
#if DISABLED(DELTA)

4
buildroot/tests/rambo
View File

@ -114,10 +114,10 @@ opt_set MOTHERBOARD BOARD_RAMBO \
FAN_MIN_PWM 50 FAN_KICKSTART_TIME 100 \
XY_FREQUENCY_LIMIT 15
opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \
BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM \
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE FILAMENT_WIDTH_SENSOR PROBE_OFFSET_WIZARD \
FIX_MOUNTED_PROBE PROBING_ESTEPPERS_OFF AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE PROBE_OFFSET_WIZARD \
Z_SAFE_HOMING SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT \