bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ Fan tachometer support (#23086, #23180, #23199)

Browse Source 
Co-Authored-By: Scott Lahteine <github@thinkyhead.com>
This commit is contained in:
Giuliano Zaro
2021-11-23 21:01:53 +01:00
committed by Scott Lahteine
parent 884308f964
commit af1d603374
21 changed files with 592 additions and 44 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
Marlin/Configuration_adv.h
View File

@@ -603,6 +603,40 @@
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/**
* Hotend Cooling Fans tachometers
*
* Define one or more tachometer pins to enable fan speed
* monitoring, and reporting of fan speeds with M123.
*
* NOTE: Only works with fans up to 7000 RPM.
*/
//#define FOURWIRES_FANS // Needed with AUTO_FAN when 4-wire PWM fans are installed
//#define E0_FAN_TACHO_PIN -1
//#define E0_FAN_TACHO_PULLUP
//#define E0_FAN_TACHO_PULLDOWN
//#define E1_FAN_TACHO_PIN -1
//#define E1_FAN_TACHO_PULLUP
//#define E1_FAN_TACHO_PULLDOWN
//#define E2_FAN_TACHO_PIN -1
//#define E2_FAN_TACHO_PULLUP
//#define E2_FAN_TACHO_PULLDOWN
//#define E3_FAN_TACHO_PIN -1
//#define E3_FAN_TACHO_PULLUP
//#define E3_FAN_TACHO_PULLDOWN
//#define E4_FAN_TACHO_PIN -1
//#define E4_FAN_TACHO_PULLUP
//#define E4_FAN_TACHO_PULLDOWN
//#define E5_FAN_TACHO_PIN -1
//#define E5_FAN_TACHO_PULLUP
//#define E5_FAN_TACHO_PULLDOWN
//#define E6_FAN_TACHO_PIN -1
//#define E6_FAN_TACHO_PULLUP
//#define E6_FAN_TACHO_PULLDOWN
//#define E7_FAN_TACHO_PIN -1
//#define E7_FAN_TACHO_PULLUP
//#define E7_FAN_TACHO_PULLDOWN
/**
* Part-Cooling Fan Multiplexer
*
@@ -3607,6 +3641,12 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* Auto-report fan speed with M123 S<seconds>
* Requires fans with tachometer pins
*/
//#define AUTO_REPORT_FANS
/**
* Auto-report temperatures with M155 S<seconds>
*/

7
Marlin/src/MarlinCore.cpp
View File

@@ -212,6 +212,10 @@
#include "module/tool_change.h"
#if HAS_FANCHECK
#include "feature/fancheck.h"
#endif
#if ENABLED(USE_CONTROLLER_FAN)
#include "feature/controllerfan.h"
#endif
@@ -832,6 +836,7 @@ void idle(bool no_stepper_sleep/*=false*/) {
#if HAS_AUTO_REPORTING
if (!gcode.autoreport_paused) {
TERN_(AUTO_REPORT_TEMPERATURES, thermalManager.auto_reporter.tick());
TERN_(AUTO_REPORT_FANS, fan_check.auto_reporter.tick());
TERN_(AUTO_REPORT_SD_STATUS, card.auto_reporter.tick());
TERN_(AUTO_REPORT_POSITION, position_auto_reporter.tick());
TERN_(BUFFER_MONITORING, queue.auto_report_buffer_statistics());
@@ -1278,6 +1283,8 @@ void setup() {
SETUP_RUN(controllerFan.setup());
#endif
TERN_(HAS_FANCHECK, fan_check.init());
// UI must be initialized before EEPROM
// (because EEPROM code calls the UI).

1
Marlin/src/core/language.h
View File

@@ -140,6 +140,7 @@
#define STR_RESEND "Resend: "
#define STR_UNKNOWN_COMMAND "Unknown command: \""
#define STR_ACTIVE_EXTRUDER "Active Extruder: "
#define STR_ERR_FANSPEED "Fan speed E"
#define STR_PROBE_OFFSET "Probe Offset"
#define STR_SKEW_MIN "min_skew_factor: "

207
Marlin/src/feature/fancheck.cpp Normal file
View File

@@ -0,0 +1,207 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* fancheck.cpp - fan tachometer check
*/
#include "../inc/MarlinConfig.h"
#if HAS_FANCHECK
#include "fancheck.h"
#include "../module/temperature.h"
#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255 && DISABLED(FOURWIRES_FANS)
bool FanCheck::measuring = false;
#endif
bool FanCheck::tacho_state[TACHO_COUNT];
uint16_t FanCheck::edge_counter[TACHO_COUNT];
uint8_t FanCheck::rps[TACHO_COUNT];
FanCheck::TachoError FanCheck::error = FanCheck::TachoError::NONE;
bool FanCheck::enabled;
void FanCheck::init() {
#define _TACHINIT(N) TERN(E##N##_FAN_TACHO_PULLUP, SET_INPUT_PULLUP, TERN(E##N##_FAN_TACHO_PULLDOWN, SET_INPUT_PULLDOWN, SET_INPUT))(E##N##_FAN_TACHO_PIN)
#if HAS_E0_FAN_TACHO
_TACHINIT(0);
#endif
#if HAS_E1_FAN_TACHO
_TACHINIT(1);
#endif
#if HAS_E2_FAN_TACHO
_TACHINIT(2);
#endif
#if HAS_E3_FAN_TACHO
_TACHINIT(3);
#endif
#if HAS_E4_FAN_TACHO
_TACHINIT(4);
#endif
#if HAS_E5_FAN_TACHO
_TACHINIT(5);
#endif
#if HAS_E6_FAN_TACHO
_TACHINIT(6);
#endif
#if HAS_E7_FAN_TACHO
_TACHINIT(7);
#endif
}
void FanCheck::update_tachometers() {
bool status;
#define _TACHO_CASE(N) case N: status = READ(E##N##_FAN_TACHO_PIN); break;
LOOP_L_N(f, TACHO_COUNT) {
switch (f) {
#if HAS_E0_FAN_TACHO
_TACHO_CASE(0)
#endif
#if HAS_E1_FAN_TACHO
_TACHO_CASE(1)
#endif
#if HAS_E2_FAN_TACHO
_TACHO_CASE(2)
#endif
#if HAS_E3_FAN_TACHO
_TACHO_CASE(3)
#endif
#if HAS_E4_FAN_TACHO
_TACHO_CASE(4)
#endif
#if HAS_E5_FAN_TACHO
_TACHO_CASE(5)
#endif
#if HAS_E6_FAN_TACHO
_TACHO_CASE(6)
#endif
#if HAS_E7_FAN_TACHO
_TACHO_CASE(7)
#endif
default: continue;
}
if (status != tacho_state[f]) {
if (measuring) ++edge_counter[f];
tacho_state[f] = status;
}
}
}
void FanCheck::compute_speed(uint16_t elapsedTime) {
static uint8_t errors_count[TACHO_COUNT];
static uint8_t fan_reported_errors_msk = 0;
uint8_t fan_error_msk = 0;
LOOP_L_N(f, TACHO_COUNT) {
switch (f) {
TERN_(HAS_E0_FAN_TACHO, case 0:)
TERN_(HAS_E1_FAN_TACHO, case 1:)
TERN_(HAS_E2_FAN_TACHO, case 2:)
TERN_(HAS_E3_FAN_TACHO, case 3:)
TERN_(HAS_E4_FAN_TACHO, case 4:)
TERN_(HAS_E5_FAN_TACHO, case 5:)
TERN_(HAS_E6_FAN_TACHO, case 6:)
TERN_(HAS_E7_FAN_TACHO, case 7:)
// Compute fan speed
rps[f] = edge_counter[f] * float(250) / elapsedTime;
edge_counter[f] = 0;
// Check fan speed
constexpr int8_t max_extruder_fan_errors = TERN(HAS_PWMFANCHECK, 10000, 5000) / Temperature::fan_update_interval_ms;
if (rps[f] >= 20 || TERN0(HAS_AUTO_FAN, thermalManager.autofan_speed[f] == 0))
errors_count[f] = 0;
else if (errors_count[f] < max_extruder_fan_errors)
++errors_count[f];
else if (enabled)
SBI(fan_error_msk, f);
break;
}
}
// Drop the error when all fans are ok
if (!fan_error_msk && error == TachoError::REPORTED) error = TachoError::FIXED;
if (error == TachoError::FIXED && !printJobOngoing() && !printingIsPaused()) {
error = TachoError::NONE; // if the issue has been fixed while the printer is idle, reenable immediately
ui.reset_alert_level();
}
if (fan_error_msk & ~fan_reported_errors_msk) {
// Handle new faults only
LOOP_L_N(f, TACHO_COUNT) if (TEST(fan_error_msk, f)) report_speed_error(f);
}
fan_reported_errors_msk = fan_error_msk;
}
void FanCheck::report_speed_error(uint8_t fan) {
if (printJobOngoing()) {
if (error == TachoError::NONE) {
if (thermalManager.degTargetHotend(fan) != 0) {
kill(GET_TEXT_F(MSG_FAN_SPEED_FAULT));
error = TachoError::REPORTED;
}
else
error = TachoError::DETECTED; // Plans error for next processed command
}
}
else if (!printingIsPaused()) {
thermalManager.setTargetHotend(0, fan); // Always disable heating
if (error == TachoError::NONE) error = TachoError::REPORTED;
}
SERIAL_ERROR_MSG(STR_ERR_FANSPEED, fan);
LCD_ALERTMESSAGE(MSG_FAN_SPEED_FAULT);
}
void FanCheck::print_fan_states() {
LOOP_L_N(s, 2) {
LOOP_L_N(f, TACHO_COUNT) {
switch (f) {
TERN_(HAS_E0_FAN_TACHO, case 0:)
TERN_(HAS_E1_FAN_TACHO, case 1:)
TERN_(HAS_E2_FAN_TACHO, case 2:)
TERN_(HAS_E3_FAN_TACHO, case 3:)
TERN_(HAS_E4_FAN_TACHO, case 4:)
TERN_(HAS_E5_FAN_TACHO, case 5:)
TERN_(HAS_E6_FAN_TACHO, case 6:)
TERN_(HAS_E7_FAN_TACHO, case 7:)
SERIAL_ECHOPGM("E", f);
if (s == 0)
SERIAL_ECHOPGM(":", 60 * rps[f], " RPM ");
else
SERIAL_ECHOPGM("@:", TERN(HAS_AUTO_FAN, thermalManager.autofan_speed[f], 255), " ");
break;
}
}
}
SERIAL_EOL();
}
#if ENABLED(AUTO_REPORT_FANS)
AutoReporter<FanCheck::AutoReportFan> FanCheck::auto_reporter;
void FanCheck::AutoReportFan::report() { print_fan_states(); }
#endif
#endif // HAS_FANCHECK

89
Marlin/src/feature/fancheck.h Normal file
View File

@@ -0,0 +1,89 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../inc/MarlinConfig.h"
#if HAS_FANCHECK
#include "../MarlinCore.h"
#include "../lcd/marlinui.h"
#if ENABLED(AUTO_REPORT_FANS)
#include "../libs/autoreport.h"
#endif
#if ENABLED(PARK_HEAD_ON_PAUSE)
#include "../gcode/queue.h"
#endif
/**
* fancheck.h
*/
#define TACHO_COUNT TERN(HAS_E7_FAN_TACHO, 8, TERN(HAS_E6_FAN_TACHO, 7, TERN(HAS_E5_FAN_TACHO, 6, TERN(HAS_E4_FAN_TACHO, 5, TERN(HAS_E3_FAN_TACHO, 4, TERN(HAS_E2_FAN_TACHO, 3, TERN(HAS_E1_FAN_TACHO, 2, 1)))))))
class FanCheck {
private:
enum class TachoError : uint8_t { NONE, DETECTED, REPORTED, FIXED };
#if HAS_PWMFANCHECK
static bool measuring; // For future use (3 wires PWM controlled fans)
#else
static constexpr bool measuring = true;
#endif
static bool tacho_state[TACHO_COUNT];
static uint16_t edge_counter[TACHO_COUNT];
static uint8_t rps[TACHO_COUNT];
static TachoError error;
static inline void report_speed_error(uint8_t fan);
public:
static bool enabled;
static void init();
static void update_tachometers();
static void compute_speed(uint16_t elapsedTime);
static void print_fan_states();
#if HAS_PWMFANCHECK
static inline void toggle_measuring() { measuring = !measuring; }
static inline bool is_measuring() { return measuring; }
#endif
static inline void check_deferred_error() {
if (error == TachoError::DETECTED) {
error = TachoError::REPORTED;
TERN(PARK_HEAD_ON_PAUSE, queue.inject(F("M125")), kill(GET_TEXT_F(MSG_FAN_SPEED_FAULT)));
}
}
#if ENABLED(AUTO_REPORT_FANS)
struct AutoReportFan { static void report(); };
static AutoReporter<AutoReportFan> auto_reporter;
#endif
};
extern FanCheck fan_check;
#endif // HAS_FANCHECK

2
Marlin/src/gcode/control/M999.cpp
View File

@@ -22,7 +22,7 @@
#include "../gcode.h"
#include "../../lcd/marlinui.h" // for lcd_reset_alert_level
#include "../../lcd/marlinui.h" // for ui.reset_alert_level
#include "../../MarlinCore.h" // for marlin_state
#include "../queue.h" // for flush_and_request_resend

10
Marlin/src/gcode/gcode.cpp
View File

@@ -65,6 +65,10 @@ GcodeSuite gcode;
#include "../feature/password/password.h"
#endif
#if HAS_FANCHECK
#include "../feature/fancheck.h"
#endif
#include "../MarlinCore.h" // for idle, kill
// Inactivity shutdown
@@ -296,6 +300,8 @@ void GcodeSuite::dwell(millis_t time) {
* Process the parsed command and dispatch it to its handler
*/
void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
TERN_(HAS_FANCHECK, fan_check.check_deferred_error());
KEEPALIVE_STATE(IN_HANDLER);
/**
@@ -577,6 +583,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 113: M113(); break; // M113: Set Host Keepalive interval
#endif
#if HAS_FANCHECK
case 123: M123(); break; // M123: Report fan states or set fans auto-report interval
#endif
#if HAS_HEATED_BED
case 140: M140(); break; // M140: Set bed temperature
case 190: M190(); break; // M190: Wait for bed temperature to reach target

5
Marlin/src/gcode/gcode.h
View File

@@ -156,6 +156,7 @@
* M121 - Disable endstops detection.
*
* M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
* M123 - Report fan tachometers. (Requires En_FAN_TACHO_PIN) Optionally set auto-report interval. (Requires AUTO_REPORT_FANS)
* M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE)
*
* M126 - Solenoid Air Valve Open. (Requires BARICUDA)
@@ -737,6 +738,10 @@ private:
static void M120();
static void M121();
#if HAS_FANCHECK
static void M123();
#endif
#if ENABLED(PARK_HEAD_ON_PAUSE)
static void M125();
#endif

48
Marlin/src/gcode/temp/M123.cpp Normal file
View File

@@ -0,0 +1,48 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_FANCHECK
#include "../gcode.h"
#include "../../feature/fancheck.h"
/**
* M123: Report fan states -or- set interval for auto-report
*
* S<seconds> : Set auto-report interval
*/
void GcodeSuite::M123() {
#if ENABLED(AUTO_REPORT_FANS)
if (parser.seenval('S')) {
fan_check.auto_reporter.set_interval(parser.value_byte());
return;
}
#endif
fan_check.print_fan_states();
}
#endif // HAS_FANCHECK

34
Marlin/src/inc/Conditionals_post.h
View File

@@ -2510,10 +2510,42 @@
#define AUTO_CHAMBER_IS_E 1
#endif
// Fans check
#if HAS_HOTEND && PIN_EXISTS(E0_FAN_TACHO)
#define HAS_E0_FAN_TACHO 1
#endif
#if HOTENDS > 1 && PIN_EXISTS(E1_FAN_TACHO)
#define HAS_E1_FAN_TACHO 1
#endif
#if HOTENDS > 2 && PIN_EXISTS(E2_FAN_TACHO)
#define HAS_E2_FAN_TACHO 1
#endif
#if HOTENDS > 3 && PIN_EXISTS(E3_FAN_TACHO)
#define HAS_E3_FAN_TACHO 1
#endif
#if HOTENDS > 4 && PIN_EXISTS(E4_FAN_TACHO)
#define HAS_E4_FAN_TACHO 1
#endif
#if HOTENDS > 5 && PIN_EXISTS(E5_FAN_TACHO)
#define HAS_E5_FAN_TACHO 1
#endif
#if HOTENDS > 6 && PIN_EXISTS(E6_FAN_TACHO)
#define HAS_E6_FAN_TACHO 1
#endif
#if HOTENDS > 7 && PIN_EXISTS(E7_FAN_TACHO)
#define HAS_E7_FAN_TACHO 1
#endif
#if ANY(HAS_E0_FAN_TACHO, HAS_E1_FAN_TACHO, HAS_E2_FAN_TACHO, HAS_E3_FAN_TACHO, HAS_E4_FAN_TACHO, HAS_E5_FAN_TACHO, HAS_E6_FAN_TACHO, HAS_E7_FAN_TACHO)
#define HAS_FANCHECK 1
#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255 && DISABLED(FOURWIRES_FANS)
#define HAS_PWMFANCHECK 1
#endif
#endif
#if !HAS_TEMP_SENSOR
#undef AUTO_REPORT_TEMPERATURES
#endif
#if ANY(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS, AUTO_REPORT_POSITION)
#if ANY(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS, AUTO_REPORT_POSITION, AUTO_REPORT_FANS)
#define HAS_AUTO_REPORTING 1
#endif

25
Marlin/src/inc/SanityCheck.h
View File

@@ -2585,6 +2585,31 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#endif
/**
* Fan check
*/
#if HAS_FANCHECK
#if BOTH(E0_FAN_TACHO_PULLUP, E0_FAN_TACHO_PULLDOWN)
#error "Enable only one of E0_FAN_TACHO_PULLUP or E0_FAN_TACHO_PULLDOWN."
#elif BOTH(E1_FAN_TACHO_PULLUP, E1_FAN_TACHO_PULLDOWN)
#error "Enable only one of E1_FAN_TACHO_PULLUP or E1_FAN_TACHO_PULLDOWN."
#elif BOTH(E2_FAN_TACHO_PULLUP, E2_FAN_TACHO_PULLDOWN)
#error "Enable only one of E2_FAN_TACHO_PULLUP or E2_FAN_TACHO_PULLDOWN."
#elif BOTH(E3_FAN_TACHO_PULLUP, E3_FAN_TACHO_PULLDOWN)
#error "Enable only one of E3_FAN_TACHO_PULLUP or E3_FAN_TACHO_PULLDOWN."
#elif BOTH(E4_FAN_TACHO_PULLUP, E4_FAN_TACHO_PULLDOWN)
#error "Enable only one of E4_FAN_TACHO_PULLUP or E4_FAN_TACHO_PULLDOWN."
#elif BOTH(E5_FAN_TACHO_PULLUP, E5_FAN_TACHO_PULLDOWN)
#error "Enable only one of E5_FAN_TACHO_PULLUP or E5_FAN_TACHO_PULLDOWN."
#elif BOTH(E6_FAN_TACHO_PULLUP, E6_FAN_TACHO_PULLDOWN)
#error "Enable only one of E6_FAN_TACHO_PULLUP or E6_FAN_TACHO_PULLDOWN."
#elif BOTH(E7_FAN_TACHO_PULLUP, E7_FAN_TACHO_PULLDOWN)
#error "Enable only one of E7_FAN_TACHO_PULLUP or E7_FAN_TACHO_PULLDOWN."
#endif
#elif ENABLED(AUTO_REPORT_FANS)
#error "AUTO_REPORT_FANS requires one or more fans with a tachometer pin."
#endif
/**
* Make sure only one EEPROM type is enabled
*/

2
Marlin/src/lcd/language/language_en.h
View File

@@ -570,6 +570,7 @@ namespace Language_en {
LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("Runaway Watch: OFF");
LSTR MSG_INFO_RUNAWAY_ON = _UxGT("Runaway Watch: ON");
LSTR MSG_HOTEND_IDLE_TIMEOUT = _UxGT("Hotend Idle Timeout");
LSTR MSG_FAN_SPEED_FAULT = _UxGT("Fan speed fault");
LSTR MSG_CASE_LIGHT = _UxGT("Case Light");
LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Light Brightness");
@@ -613,6 +614,7 @@ namespace Language_en {
LSTR MSG_RUNOUT_SENSOR = _UxGT("Runout Sensor");
LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Runout Dist mm");
LSTR MSG_RUNOUT_ENABLE = _UxGT("Enable Runout");
LSTR MSG_FANCHECK = _UxGT("Fan Tacho Check");
LSTR MSG_KILL_HOMING_FAILED = _UxGT("Homing Failed");
LSTR MSG_LCD_PROBING_FAILED = _UxGT("Probing Failed");

3
Marlin/src/lcd/language/language_it.h
View File

@@ -556,6 +556,7 @@ namespace Language_it {
LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("Controllo fuga: OFF");
LSTR MSG_INFO_RUNAWAY_ON = _UxGT("Controllo fuga: ON");
LSTR MSG_HOTEND_IDLE_TIMEOUT = _UxGT("Timeout inatt.ugello");
LSTR MSG_FAN_SPEED_FAULT = _UxGT("Err.vel.della ventola");
LSTR MSG_CASE_LIGHT = _UxGT("Luci Case");
LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Luminosità Luci");
@@ -597,6 +598,8 @@ namespace Language_it {
LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Ugello: ");
LSTR MSG_RUNOUT_SENSOR = _UxGT("Sens.filo termin."); // Max 17 characters
LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Dist mm filo term.");
LSTR MSG_RUNOUT_ENABLE = _UxGT("Abil.filo termin.");
LSTR MSG_FANCHECK = _UxGT("Verif.tacho vent."); // Max 17 characters
LSTR MSG_KILL_HOMING_FAILED = _UxGT("Home fallito");
LSTR MSG_LCD_PROBING_FAILED = _UxGT("Sondaggio fallito");

4
Marlin/src/lcd/marlinui.cpp
View File

@@ -1566,10 +1566,6 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
TERN_(HAS_LCD_MENU, return_to_status());
}
#if ANY(PARK_HEAD_ON_PAUSE, SDSUPPORT)
#include "../gcode/queue.h"
#endif
void MarlinUI::pause_print() {
#if HAS_LCD_MENU
synchronize(GET_TEXT(MSG_PAUSING));

8
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@@ -34,6 +34,10 @@
#include "../../feature/runout.h"
#endif
#if HAS_FANCHECK
#include "../../feature/fancheck.h"
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../feature/powerloss.h"
#endif
@@ -537,6 +541,10 @@ void menu_configuration() {
EDIT_ITEM(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset);
#endif
#if HAS_FANCHECK
EDIT_ITEM(bool, MSG_FANCHECK, &fan_check.enabled);
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
EDIT_ITEM(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed);
#endif

31
Marlin/src/module/settings.cpp
View File

@@ -154,6 +154,10 @@
#include "../libs/buzzer.h"
#endif
#if HAS_FANCHECK
#include "../feature/fancheck.h"
#endif
#if ENABLED(DGUS_LCD_UI_MKS)
#include "../lcd/extui/dgus/DGUSScreenHandler.h"
#include "../lcd/extui/dgus/DGUSDisplayDef.h"
@@ -491,6 +495,13 @@ typedef struct SettingsDataStruct {
bool buzzer_enabled;
#endif
//
// Fan tachometer check
//
#if HAS_FANCHECK
bool fan_check_enabled;
#endif
//
// MKS UI controller
//
@@ -1433,6 +1444,13 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(ui.buzzer_enabled);
#endif
//
// Fan tachometer check
//
#if HAS_FANCHECK
EEPROM_WRITE(fan_check.enabled);
#endif
//
// MKS UI controller
//
@@ -2339,6 +2357,14 @@ void MarlinSettings::postprocess() {
EEPROM_READ(ui.buzzer_enabled);
#endif
//
// Fan tachometer check
//
#if HAS_FANCHECK
_FIELD_TEST(fan_check_enabled);
EEPROM_READ(fan_check.enabled);
#endif
//
// MKS UI controller
//
@@ -3036,6 +3062,11 @@ void MarlinSettings::reset() {
#endif
#endif
//
// Fan tachometer check
//
TERN_(HAS_FANCHECK, fan_check.enabled = true);
//
// MKS UI controller
//

67
Marlin/src/module/temperature.cpp
View File

@@ -298,7 +298,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED);
redundant_info_t Temperature::temp_redundant;
#endif
#if ENABLED(AUTO_POWER_E_FANS)
#if EITHER(AUTO_POWER_E_FANS, HAS_FANCHECK)
uint8_t Temperature::autofan_speed[HOTENDS]; // = { 0 }
#endif
@@ -530,8 +530,9 @@ volatile bool Temperature::raw_temps_ready = false;
millis_t Temperature::preheat_end_time[HOTENDS] = { 0 };
#endif
#if HAS_AUTO_FAN
millis_t Temperature::next_auto_fan_check_ms = 0;
#if HAS_FAN_LOGIC
constexpr millis_t Temperature::fan_update_interval_ms;
millis_t Temperature::fan_update_ms = 0;
#endif
#if ENABLED(FAN_SOFT_PWM)
@@ -618,7 +619,7 @@ volatile bool Temperature::raw_temps_ready = false;
bool heated = false;
#endif
TERN_(HAS_AUTO_FAN, next_auto_fan_check_ms = next_temp_ms + 2500UL);
TERN_(HAS_FAN_LOGIC, fan_update_ms = next_temp_ms + fan_update_interval_ms);
TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_STARTED));
TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_PidTuning(isbed ? PID_BED_START : PID_EXTR_START));
@@ -663,12 +664,7 @@ volatile bool Temperature::raw_temps_ready = false;
ONHEATING(start_temp, current_temp, target);
#endif
#if HAS_AUTO_FAN
if (ELAPSED(ms, next_auto_fan_check_ms)) {
checkExtruderAutoFans();
next_auto_fan_check_ms = ms + 2500UL;
}
#endif
TERN_(HAS_FAN_LOGIC, manage_extruder_fans(ms));
if (heating && current_temp > target && ELAPSED(ms, t2 + 5000UL)) {
heating = false;
@@ -857,6 +853,7 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) {
#define _EFANOVERLAP(A,B) _FANOVERLAP(E##A,B)
#if HAS_AUTO_FAN
#if EXTRUDER_AUTO_FAN_SPEED != 255
#define INIT_E_AUTO_FAN_PIN(P) do{ if (P == FAN1_PIN || P == FAN2_PIN) { SET_PWM(P); SET_FAST_PWM_FREQ(P); } else SET_OUTPUT(P); }while(0)
#else
@@ -870,7 +867,7 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) {
#define CHAMBER_FAN_INDEX HOTENDS
void Temperature::checkExtruderAutoFans() {
void Temperature::update_autofans() {
#define _EFAN(B,A) _EFANOVERLAP(A,B) ? B :
static const uint8_t fanBit[] PROGMEM = {
0
@@ -930,36 +927,43 @@ int16_t Temperature::getHeaterPower(const heater_id_t heater_id) {
break;
#endif
default:
#if ENABLED(AUTO_POWER_E_FANS)
#if EITHER(AUTO_POWER_E_FANS, HAS_FANCHECK)
autofan_speed[realFan] = fan_on ? EXTRUDER_AUTO_FAN_SPEED : 0;
#endif
break;
}
#if BOTH(HAS_FANCHECK, HAS_PWMFANCHECK)
#define _AUTOFAN_SPEED() fan_check.is_measuring() ? 255 : EXTRUDER_AUTO_FAN_SPEED
#else
#define _AUTOFAN_SPEED() EXTRUDER_AUTO_FAN_SPEED
#endif
#define _AUTOFAN_CASE(N) case N: _UPDATE_AUTO_FAN(E##N, fan_on, _AUTOFAN_SPEED()); break
switch (f) {
#if HAS_AUTO_FAN_0
case 0: _UPDATE_AUTO_FAN(E0, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(0);
#endif
#if HAS_AUTO_FAN_1
case 1: _UPDATE_AUTO_FAN(E1, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(1);
#endif
#if HAS_AUTO_FAN_2
case 2: _UPDATE_AUTO_FAN(E2, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(2);
#endif
#if HAS_AUTO_FAN_3
case 3: _UPDATE_AUTO_FAN(E3, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(3);
#endif
#if HAS_AUTO_FAN_4
case 4: _UPDATE_AUTO_FAN(E4, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(4);
#endif
#if HAS_AUTO_FAN_5
case 5: _UPDATE_AUTO_FAN(E5, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(5);
#endif
#if HAS_AUTO_FAN_6
case 6: _UPDATE_AUTO_FAN(E6, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(6);
#endif
#if HAS_AUTO_FAN_7
case 7: _UPDATE_AUTO_FAN(E7, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
_AUTOFAN_CASE(7);
#endif
#if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E
case CHAMBER_FAN_INDEX: _UPDATE_AUTO_FAN(CHAMBER, fan_on, CHAMBER_AUTO_FAN_SPEED); break;
@@ -1391,20 +1395,14 @@ void Temperature::manage_heater() {
_temp_error((heater_id_t)HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET), F(STR_REDUNDANCY), GET_TEXT_F(MSG_ERR_REDUNDANT_TEMP));
#endif
#if HAS_AUTO_FAN
if (ELAPSED(ms, next_auto_fan_check_ms)) { // only need to check fan state very infrequently
checkExtruderAutoFans();
next_auto_fan_check_ms = ms + 2500UL;
}
#endif
// Manage extruder auto fans and/or read fan tachometers
TERN_(HAS_FAN_LOGIC, manage_extruder_fans(ms));
#if ENABLED(FILAMENT_WIDTH_SENSOR)
/**
* Dynamically set the volumetric multiplier based
* on the delayed Filament Width measurement.
*/
filwidth.update_volumetric();
#endif
/**
* Dynamically set the volumetric multiplier based
* on the delayed Filament Width measurement.
*/
TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_volumetric());
#if HAS_HEATED_BED
@@ -3525,6 +3523,9 @@ void Temperature::isr() {
babystep.task();
#endif
// Check fan tachometers
TERN_(HAS_FANCHECK, fan_check.update_tachometers());
// Poll endstops state, if required
endstops.poll();

40
Marlin/src/module/temperature.h
View File

@@ -37,6 +37,10 @@
#include "../libs/autoreport.h"
#endif
#if HAS_FANCHECK
#include "../feature/fancheck.h"
#endif
#ifndef SOFT_PWM_SCALE
#define SOFT_PWM_SCALE 0
#endif
@@ -344,6 +348,10 @@ typedef struct { int16_t raw_min, raw_max; celsius_t mintemp, maxtemp; } temp_ra
#endif
#if HAS_AUTO_FAN || HAS_FANCHECK
#define HAS_FAN_LOGIC 1
#endif
class Temperature {
public:
@@ -372,7 +380,7 @@ class Temperature {
static redundant_info_t temp_redundant;
#endif
#if ENABLED(AUTO_POWER_E_FANS)
#if EITHER(AUTO_POWER_E_FANS, HAS_FANCHECK)
static uint8_t autofan_speed[HOTENDS];
#endif
#if ENABLED(AUTO_POWER_CHAMBER_FAN)
@@ -459,6 +467,10 @@ class Temperature {
static int16_t lpq_len;
#endif
#if HAS_FAN_LOGIC
static constexpr millis_t fan_update_interval_ms = TERN(HAS_PWMFANCHECK, 5000, TERN(HAS_FANCHECK, 1000, 2500));
#endif
private:
#if ENABLED(WATCH_HOTENDS)
@@ -510,8 +522,28 @@ class Temperature {
static millis_t preheat_end_time[HOTENDS];
#endif
#if HAS_AUTO_FAN
static millis_t next_auto_fan_check_ms;
#if HAS_FAN_LOGIC
static millis_t fan_update_ms;
static inline void manage_extruder_fans(millis_t ms) {
if (ELAPSED(ms, fan_update_ms)) { // only need to check fan state very infrequently
const millis_t next_ms = ms + fan_update_interval_ms;
#if HAS_PWMFANCHECK
#define FAN_CHECK_DURATION 100
if (fan_check.is_measuring()) {
fan_check.compute_speed(ms + FAN_CHECK_DURATION - fan_update_ms);
fan_update_ms = next_ms;
}
else
fan_update_ms = ms + FAN_CHECK_DURATION;
fan_check.toggle_measuring();
#else
TERN_(HAS_FANCHECK, fan_check.compute_speed(next_ms - fan_update_ms));
fan_update_ms = next_ms;
#endif
TERN_(HAS_AUTO_FAN, update_autofans()); // Needed as last when HAS_PWMFANCHECK to properly force fan speed
}
}
#endif
#if ENABLED(PROBING_HEATERS_OFF)
@@ -961,7 +993,7 @@ class Temperature {
static int16_t read_max_tc(TERN_(HAS_MULTI_MAX_TC, const uint8_t hindex=0));
#endif
static void checkExtruderAutoFans();
static void update_autofans();
#if HAS_HOTEND
static float get_pid_output_hotend(const uint8_t e);

8
Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h
View File

@@ -188,6 +188,14 @@
#endif
#endif
#ifndef E0_FAN_TACHO_PIN
#ifdef MK3_FAN_PINS
#define E0_FAN_TACHO_PIN PE1 // Fan1
#else
#define E0_FAN_TACHO_PIN PE0 // Fan0
#endif
#endif
/**
* -----------------------------------BTT002 V1.0----------------------------------------
* ------ ------ |

3
ini/features.ini
View File

@@ -108,6 +108,7 @@ CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.
CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
HAS_COOLER|LASER_COOLANT_FLOW_METER = src_filter=+<src/feature/cooler.cpp>
HAS_MOTOR_CURRENT_DAC = src_filter=+<src/feature/dac>
DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
@@ -115,6 +116,7 @@ I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cp
IIC_BL24CXX_EEPROM = src_filter=+<src/libs/BL24CXX.cpp>
HAS_SPI_FLASH = src_filter=+<src/libs/W25Qxx.cpp>
HAS_ETHERNET = src_filter=+<src/feature/ethernet.cpp> +<src/gcode/feature/network/M552-M554.cpp>
HAS_FANCHECK = src_filter=+<src/feature/fancheck.cpp> +<src/gcode/temp/M123.cpp>
HAS_FANMUX = src_filter=+<src/feature/fanmux.cpp>
FILAMENT_WIDTH_SENSOR = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
FWRETRACT = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
@@ -212,7 +214,6 @@ GCODE_REPEAT_MARKERS = src_filter=+<src/feature/repeat.cpp> +<
HAS_EXTRUDERS = src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
HAS_TEMP_PROBE = src_filter=+<src/gcode/temp/M192.cpp>
HAS_COOLER = src_filter=+<src/gcode/temp/M143_M193.cpp>
HAS_COOLER|LASER_COOLANT_FLOW_METER = src_filter=+<src/feature/cooler.cpp>
AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>

2
platformio.ini
View File

@@ -112,6 +112,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/feature/e_parser.cpp>
-<src/feature/encoder_i2c.cpp>
-<src/feature/ethernet.cpp> -<src/gcode/feature/network/M552-M554.cpp>
-<src/feature/fancheck.cpp>
-<src/feature/fanmux.cpp>
-<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
-<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
@@ -229,6 +230,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/gcode/sd/M32.cpp>
-<src/gcode/sd/M808.cpp>
-<src/gcode/temp/M104_M109.cpp>
-<src/gcode/temp/M123.cpp>
-<src/gcode/temp/M155.cpp>
-<src/gcode/temp/M192.cpp>
-<src/gcode/units/G20_G21.cpp>