Weedo 62A Tina2 / Monoprice Cadet (#23817)

This commit is contained in:
Julien Staub 2022-03-01 23:42:20 +01:00 committed by Scott Lahteine
parent 0337602bbe
commit 9b17699b9b
4 changed files with 110 additions and 0 deletions

View File

@ -164,6 +164,7 @@
#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
#define BOARD_GT2560_V4_A20 1328 // Geeetech GT2560 Rev B for A20(M/T/D)
#define BOARD_PROTONEER_CNC_SHIELD_V3 1329 // Mega controller & Protoneer CNC Shield V3.00
#define BOARD_WEEDO_62A 1330 // WEEDO 62A board (TINA2, Monoprice Cadet, etc.)
//
// ATmega1281, ATmega2561

View File

@ -51,6 +51,7 @@
#define SERVO0_PIN 3
#define SERVO1_PIN 4
#define SERVO2_PIN 5
//
// Limit Switches
//

View File

@ -0,0 +1,106 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Based on WEEDO 62A pin configuration
* Copyright (c) 2019 WEEDO3D Perron
*/
#pragma once
#include "env_validate.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "WEEDO 62A"
#endif
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 40
#define Y_MAX_PIN 41
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Steppers
//
#define X_STEP_PIN 26
#define X_DIR_PIN 28
#define X_ENABLE_PIN 24
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define E0_STEP_PIN 54
#define E0_DIR_PIN 55
#define E0_ENABLE_PIN 38
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
//
// Heaters / Fans
//
#define HEATER_0_PIN 10 // EXTRUDER 1
#define HEATER_BED_PIN 8 // BED
#define FAN_PIN 4 // IO pin. Buffer needed
//
// Misc. Functions
//
#define PS_ON_PIN 12
#define LED_PIN 13
//
// SD Support
//
#if ENABLED(SDSUPPORT)
#define SDSS 53
#define SD_DETECT_PIN 49
#endif
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#define BEEPER_PIN 37
#define DOGLCD_A0 27
#define DOGLCD_CS 29
#define LCD_RESET_PIN 25
#define LCD_CONTRAST_INIT 255
#define BTN_EN1 33
#define BTN_EN2 31
#define BTN_ENC 35
#endif

View File

@ -287,6 +287,8 @@
#include "mega/pins_MALYAN_M180.h" // ATmega2560 env:mega2560
#elif MB(PROTONEER_CNC_SHIELD_V3)
#include "mega/pins_PROTONEER_CNC_SHIELD_V3.h"// ATmega2560 env:mega2560
#elif MB(WEEDO_62A)
#include "mega/pins_WEEDO_62A.h" // ATmega2560 env:mega2560
//
// ATmega1281, ATmega2561