bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Drop the Z_MIN_PROBE_ENDSTOP option (#13276)

Browse Source
This commit is contained in:
Scott Lahteine 2019-03-01 00:27:45 -06:00 committed by GitHub
parent 9a6b90f47d
commit 99d0022fae
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
101 changed files with 487 additions and 770 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
Marlin/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/default/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration.h
View File

@ -770,11 +770,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -784,11 +784,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View File

@ -784,11 +784,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -798,11 +798,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Anet/A2/Configuration.h
View File

@ -764,11 +764,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Anet/A2plus/Configuration.h
View File

@ -764,11 +764,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Anet/A6/Configuration.h
View File

@ -811,11 +811,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -825,11 +825,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Anet/A8/Configuration.h
View File

@ -777,11 +777,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -791,11 +791,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/AnyCubic/i3/Configuration.h
View File

@ -774,11 +774,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -788,11 +788,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/ArmEd/Configuration.h
View File

@ -765,11 +765,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -779,11 +779,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@ -764,11 +764,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View File

@ -764,11 +764,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View File

@ -752,11 +752,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -766,11 +766,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View File

@ -765,11 +765,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -779,11 +779,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View File

@ -752,11 +752,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -766,11 +766,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Cartesio/Configuration.h
View File

@ -763,11 +763,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -777,11 +777,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View File

@ -774,11 +774,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -788,11 +788,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/CR-10_5S/Configuration.h
View File

@ -765,11 +765,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -779,11 +779,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View File

@ -783,11 +783,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -797,11 +797,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View File

@ -774,11 +774,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -788,11 +788,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View File

@ -768,11 +768,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -782,11 +782,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
View File

@ -768,11 +768,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -782,11 +782,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View File

@ -774,11 +774,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -788,11 +788,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Einstart-S/Configuration.h
View File

@ -776,11 +776,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -790,11 +790,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Felix/Configuration.h
View File

@ -746,11 +746,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -760,11 +760,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View File

@ -746,11 +746,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -760,11 +760,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration.h
View File

@ -756,11 +756,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -770,11 +770,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View File

@ -770,11 +770,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -784,11 +784,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Formbot/Raptor/Configuration.h
View File

@ -847,11 +847,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -861,11 +861,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
View File

@ -793,11 +793,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -807,11 +807,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
View File

@ -780,11 +780,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -794,11 +794,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/A10M/Configuration.h
View File

@ -747,11 +747,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -761,11 +761,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/A20M/Configuration.h
View File

@ -747,11 +747,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -761,11 +761,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View File

@ -779,11 +779,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -793,11 +793,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
View File

@ -771,11 +771,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -785,11 +785,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View File

@ -779,11 +779,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -793,11 +793,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
#define Z_MIN_PROBE_PIN 32 #define Z_MIN_PROBE_PIN 32
/** /**

13
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View File

@ -779,11 +779,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -793,11 +793,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View File

@ -768,11 +768,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -782,11 +782,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View File

@ -776,11 +776,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -790,11 +790,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/MakerParts/Configuration.h
View File

@ -784,11 +784,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -798,11 +798,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Malyan/M150/Configuration.h
View File

@ -784,11 +784,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -798,11 +798,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Malyan/M200/Configuration.h
View File

@ -763,11 +763,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -777,11 +777,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View File

@ -768,11 +768,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -782,11 +782,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View File

@ -768,11 +768,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -782,11 +782,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Mks/Robin/Configuration.h
View File

@ -765,11 +765,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -779,11 +779,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Printrbot/PrintrboardG2/Configuration.h
View File

@ -772,11 +772,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -786,11 +786,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/RapideLite/RL200/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View File

@ -804,11 +804,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -818,11 +818,8 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/RigidBot/Configuration.h
View File

@ -762,11 +762,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -776,11 +776,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/SCARA/Configuration.h
View File

@ -777,11 +777,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -791,11 +791,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/STM32F10/Configuration.h
View File

@ -766,11 +766,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -780,11 +780,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/STM32F4/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Sanguinololu/Configuration.h
View File

@ -795,11 +795,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -809,11 +809,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/TheBorg/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/TinyBoy2/Configuration.h
View File

@ -815,11 +815,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -829,11 +829,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Tronxy/X3A/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View File

@ -763,11 +763,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -777,11 +777,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View File

@ -775,11 +775,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -789,11 +789,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/VORONDesign/Configuration.h
View File

@ -773,11 +773,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -787,11 +787,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View File

@ -793,11 +793,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -807,11 +807,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/WASP/PowerWASP/Configuration.h
View File

@ -783,11 +783,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -797,11 +797,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View File

@ -774,11 +774,11 @@
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -788,11 +788,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View File

@ -764,11 +764,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -778,11 +778,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
View File

@ -896,11 +896,11 @@
#endif #endif
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -910,11 +910,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View File

@ -846,11 +846,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -860,11 +860,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled! //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View File

@ -846,11 +846,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -860,11 +860,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled! //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -846,11 +846,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -860,11 +860,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled! //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h
View File

@ -836,11 +836,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -850,11 +850,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View File

@ -851,11 +851,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -865,11 +865,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h
View File

@ -836,11 +836,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -850,11 +850,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h
View File

@ -840,11 +840,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -854,11 +854,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/generic/Configuration.h
View File

@ -836,11 +836,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -850,11 +850,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View File

@ -836,11 +836,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -850,11 +850,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View File

@ -829,11 +829,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -843,11 +843,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View File

@ -839,11 +839,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -853,11 +853,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View File

@ -777,11 +777,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -791,11 +791,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/makibox/Configuration.h
View File

@ -767,11 +767,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -781,11 +781,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View File

@ -766,11 +766,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -780,11 +780,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View File

@ -759,11 +759,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -773,11 +773,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

13
Marlin/src/config/examples/wt150/Configuration.h
View File

@ -769,11 +769,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/** /**
* Z_MIN_PROBE_ENDSTOP * Z_MIN_PROBE_PIN
* *
* Enable this option for a probe connected to any pin except Z-Min. * Define this pin if the probe is not connected to Z_MIN_PIN.
* (By default Marlin assumes the Z-Max endstop pin.) * If not defined the default pin for the selected MOTHERBOARD
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. * will be used. Most of the time the default is what you want.
* *
* - The simplest option is to use a free endstop connector. * - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors. * - Use 5V for powered (usually inductive) sensors.
@ -783,11 +783,8 @@
* - normally-closed switches to GND and D32. * - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32. * - normally-open switches to 5V and D32.
* *
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/** /**
* Probe Type * Probe Type

2
Marlin/src/gcode/config/M43.cpp
View File

@ -126,7 +126,7 @@ inline void servo_probe_test() {
probe_inverting = Z_MIN_ENDSTOP_INVERTING; probe_inverting = Z_MIN_ENDSTOP_INVERTING;
#elif ENABLED(Z_MIN_PROBE_ENDSTOP) #elif USES_Z_MIN_PROBE_ENDSTOP
#define PROBE_TEST_PIN Z_MIN_PROBE_PIN #define PROBE_TEST_PIN Z_MIN_PROBE_PIN
SERIAL_ECHOLNPAIR(". probe uses Z_MIN_PROBE_PIN: ", PROBE_TEST_PIN); SERIAL_ECHOLNPAIR(". probe uses Z_MIN_PROBE_PIN: ", PROBE_TEST_PIN);

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -505,6 +505,7 @@
#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)) #define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
#if HAS_BED_PROBE #if HAS_BED_PROBE
#define USES_Z_MIN_PROBE_ENDSTOP DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#ifndef Z_PROBE_LOW_POINT #ifndef Z_PROBE_LOW_POINT
#define Z_PROBE_LOW_POINT -5 #define Z_PROBE_LOW_POINT -5
#endif #endif
@ -514,7 +515,6 @@
#else #else
// Clear probe pin settings when no probe is selected // Clear probe pin settings when no probe is selected
#undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef Z_MIN_PROBE_ENDSTOP
#endif #endif
#define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)) #define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))

6
Marlin/src/inc/Conditionals_post.h
View File

@ -725,12 +725,12 @@
// Is an endstop plug used for the Z2 endstop or the bed probe? // Is an endstop plug used for the Z2 endstop or the bed probe?
#define IS_Z2_OR_PROBE(A,M) ( \ #define IS_Z2_OR_PROBE(A,M) ( \
(Z_MULTI_ENDSTOPS && Z2_USE_ENDSTOP == _##A##M##_) \ (Z_MULTI_ENDSTOPS && Z2_USE_ENDSTOP == _##A##M##_) \
|| (ENABLED(Z_MIN_PROBE_ENDSTOP) && Z_MIN_PROBE_PIN == A##_##M##_PIN ) ) || (USES_Z_MIN_PROBE_ENDSTOP && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
// Is an endstop plug used for the Z3 endstop or the bed probe? // Is an endstop plug used for the Z3 endstop or the bed probe?
#define IS_Z3_OR_PROBE(A,M) ( \ #define IS_Z3_OR_PROBE(A,M) ( \
(ENABLED(Z_TRIPLE_ENDSTOPS) && Z3_USE_ENDSTOP == _##A##M##_) \ (ENABLED(Z_TRIPLE_ENDSTOPS) && Z3_USE_ENDSTOP == _##A##M##_) \
|| (ENABLED(Z_MIN_PROBE_ENDSTOP) && Z_MIN_PROBE_PIN == A##_##M##_PIN ) ) || (USES_Z_MIN_PROBE_ENDSTOP && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
/** /**
* Set ENDSTOPPULLUPS for active endstop switches * Set ENDSTOPPULLUPS for active endstop switches
@ -894,7 +894,7 @@
#define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX)) #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
#define HAS_Z3_MIN (PIN_EXISTS(Z3_MIN)) #define HAS_Z3_MIN (PIN_EXISTS(Z3_MIN))
#define HAS_Z3_MAX (PIN_EXISTS(Z3_MAX)) #define HAS_Z3_MAX (PIN_EXISTS(Z3_MAX))
#define HAS_Z_MIN_PROBE_PIN (PIN_EXISTS(Z_MIN_PROBE)) #define HAS_Z_MIN_PROBE_PIN (USES_Z_MIN_PROBE_ENDSTOP && PIN_EXISTS(Z_MIN_PROBE))
#define HAS_CALIBRATION_PIN (PIN_EXISTS(CALIBRATION)) #define HAS_CALIBRATION_PIN (PIN_EXISTS(CALIBRATION))
// ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface) // ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)

14
Marlin/src/inc/SanityCheck.h
View File

@ -343,6 +343,8 @@
#error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins." #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
#elif defined(TMC_Z_CALIBRATION) #elif defined(TMC_Z_CALIBRATION)
#error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration." #error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
#elif defined(Z_MIN_PROBE_ENDSTOP)
#error "Z_MIN_PROBE_ENDSTOP is no longer required. Please remove it from Configuration.h."
#endif #endif
#define BOARD_MKS_13 -47 #define BOARD_MKS_13 -47
@ -1018,21 +1020,15 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "SENSORLESS_PROBING requires a TMC2130 driver on Z." #error "SENSORLESS_PROBING requires a TMC2130 driver on Z."
#endif #endif
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if DISABLED(USE_ZMIN_PLUG)
#error "Enable only one option: Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
#elif DISABLED(USE_ZMIN_PLUG)
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled." #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
#elif !HAS_Z_MIN #elif !HAS_Z_MIN
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined." #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
#elif Z_MIN_PROBE_ENDSTOP_INVERTING != Z_MIN_ENDSTOP_INVERTING #elif Z_MIN_PROBE_ENDSTOP_INVERTING != Z_MIN_ENDSTOP_INVERTING
#error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING." #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
#endif #endif
#elif ENABLED(Z_MIN_PROBE_ENDSTOP) #elif !HAS_Z_MIN_PROBE_PIN
#if !HAS_Z_MIN_PROBE_PIN #error "Z_MIN_PROBE_PIN must be defined if Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN is not enabled."
#error "Z_MIN_PROBE_ENDSTOP requires the Z_MIN_PROBE_PIN to be defined."
#endif
#else
#error "You must enable either Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use a probe."
#endif #endif
/** /**

16
Marlin/src/module/endstops.cpp
View File

@ -228,7 +228,7 @@ void Endstops::init() {
#endif #endif
#endif #endif
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
#if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE) #if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE)
SET_INPUT_PULLUP(Z_MIN_PROBE_PIN); SET_INPUT_PULLUP(Z_MIN_PROBE_PIN);
#elif ENABLED(ENDSTOPPULLDOWN_ZMIN_PROBE) #elif ENABLED(ENDSTOPPULLDOWN_ZMIN_PROBE)
@ -351,7 +351,7 @@ void Endstops::event_handler() {
ENDSTOP_HIT_TEST_Y(); ENDSTOP_HIT_TEST_Y();
ENDSTOP_HIT_TEST_Z(); ENDSTOP_HIT_TEST_Z();
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
#define P_AXIS Z_AXIS #define P_AXIS Z_AXIS
if (TEST(hit_state, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P'); if (TEST(hit_state, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
#endif #endif
@ -425,7 +425,7 @@ void _O2 Endstops::M119() {
#if HAS_Z3_MAX #if HAS_Z3_MAX
ES_REPORT(Z3_MAX); ES_REPORT(Z3_MAX);
#endif #endif
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
print_es_state(READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING, PSTR(MSG_Z_PROBE)); print_es_state(READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING, PSTR(MSG_Z_PROBE));
#endif #endif
#if HAS_FILAMENT_SENSOR #if HAS_FILAMENT_SENSOR
@ -586,7 +586,7 @@ void Endstops::update() {
#endif #endif
// When closing the gap check the enabled probe // When closing the gap check the enabled probe
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
#endif #endif
@ -606,7 +606,7 @@ void Endstops::update() {
COPY_LIVE_STATE(Z_MAX, Z3_MAX); COPY_LIVE_STATE(Z_MAX, Z3_MAX);
#endif #endif
#endif #endif
#elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN #elif !USES_Z_MIN_PROBE_ENDSTOP || Z_MAX_PIN != Z_MIN_PROBE_PIN
// If this pin isn't the bed probe it's the Z endstop // If this pin isn't the bed probe it's the Z endstop
UPDATE_ENDSTOP_BIT(Z, MAX); UPDATE_ENDSTOP_BIT(Z, MAX);
#endif #endif
@ -736,7 +736,7 @@ void Endstops::update() {
#else #else
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN); if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN);
#elif ENABLED(Z_MIN_PROBE_ENDSTOP) #elif USES_Z_MIN_PROBE_ENDSTOP
if (!z_probe_enabled) PROCESS_ENDSTOP(Z, MIN); if (!z_probe_enabled) PROCESS_ENDSTOP(Z, MIN);
#else #else
PROCESS_ENDSTOP(Z, MIN); PROCESS_ENDSTOP(Z, MIN);
@ -745,7 +745,7 @@ void Endstops::update() {
#endif #endif
// When closing the gap check the enabled probe // When closing the gap check the enabled probe
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN_PROBE); if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN_PROBE);
#endif #endif
} }
@ -755,7 +755,7 @@ void Endstops::update() {
PROCESS_TRIPLE_ENDSTOP(Z, Z2, Z3, MAX); PROCESS_TRIPLE_ENDSTOP(Z, Z2, Z3, MAX);
#elif ENABLED(Z_DUAL_ENDSTOPS) #elif ENABLED(Z_DUAL_ENDSTOPS)
PROCESS_DUAL_ENDSTOP(Z, Z2, MAX); PROCESS_DUAL_ENDSTOP(Z, Z2, MAX);
#elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN #elif !USES_Z_MIN_PROBE_ENDSTOP || Z_MAX_PIN != Z_MIN_PROBE_PIN
// If this pin is not hijacked for the bed probe // If this pin is not hijacked for the bed probe
// then it belongs to the Z endstop // then it belongs to the Z endstop
PROCESS_ENDSTOP(Z, MAX); PROCESS_ENDSTOP(Z, MAX);

2
Marlin/src/module/motion.cpp
View File

@ -1309,7 +1309,7 @@ void set_axis_is_at_home(const AxisEnum axis) {
#elif ENABLED(DEBUG_LEVELING_FEATURE) #elif ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("*** Z HOMED TO ENDSTOP (Z_MIN_PROBE_ENDSTOP) ***"); if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("*** Z HOMED TO ENDSTOP ***");
#endif #endif
} }

4
Marlin/src/module/probe.cpp
View File

@ -450,7 +450,7 @@ bool set_probe_deployed(const bool deploy) {
oldYpos = current_position[Y_AXIS]; oldYpos = current_position[Y_AXIS];
#if ENABLED(PROBE_TRIGGERED_WHEN_STOWED_TEST) #if ENABLED(PROBE_TRIGGERED_WHEN_STOWED_TEST)
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
#define PROBE_STOWED() (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING) #define PROBE_STOWED() (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING)
#else #else
#define PROBE_STOWED() (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING) #define PROBE_STOWED() (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)
@ -497,7 +497,7 @@ bool set_probe_deployed(const bool deploy) {
#endif #endif
#if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
#if ENABLED(Z_MIN_PROBE_ENDSTOP) #if USES_Z_MIN_PROBE_ENDSTOP
#define TEST_PROBE_PIN (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING) #define TEST_PROBE_PIN (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING)
#else #else
#define TEST_PROBE_PIN (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING) #define TEST_PROBE_PIN (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)

Some files were not shown because too many files have changed in this diff Show More