bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Drop the Z_MIN_PROBE_ENDSTOP option (#13276)

Browse Source
This commit is contained in:
Scott Lahteine
2019-03-01 00:27:45 -06:00
committed by GitHub
parent 9a6b90f47d
commit 99d0022fae
101 changed files with 487 additions and 770 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Marlin/src/config/examples/Geeetech/A10M/Configuration.h
View File

@ -747,11 +747,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/**
* Z_MIN_PROBE_ENDSTOP
* Z_MIN_PROBE_PIN
*
* Enable this option for a probe connected to any pin except Z-Min.
* (By default Marlin assumes the Z-Max endstop pin.)
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
* Define this pin if the probe is not connected to Z_MIN_PIN.
* If not defined the default pin for the selected MOTHERBOARD
* will be used. Most of the time the default is what you want.
*
* - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors.
@ -761,11 +761,8 @@
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/
//#define Z_MIN_PROBE_ENDSTOP
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/**
* Probe Type