bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Improve max temp / target

Browse Source
This commit is contained in:
Scott Lahteine 2021-03-19 16:34:10 -05:00 committed by Scott Lahteine
parent ff729744e5
commit 976403d10d
15 changed files with 47 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/Configuration.h
View File

@ -484,6 +484,7 @@
*/
#define HOTEND_OVERSHOOT 15 // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
#define BED_OVERSHOOT 10 // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
#define COOLER_OVERSHOOT 2 // (°C) Forbid temperatures closer than OVERSHOOT
//===========================================================================
//============================= PID Settings ================================

2
Marlin/src/gcode/host/M360.cpp
View File

@ -177,7 +177,7 @@ void GcodeSuite::M360() {
config_line_e(e, PSTR("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(e)]);
config_line_e(e, PSTR("Acceleration"), planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(e)]);
config_line_e(e, PSTR("Diameter"), TERN(NO_VOLUMETRICS, DEFAULT_NOMINAL_FILAMENT_DIA, planner.filament_size[e]));
config_line_e(e, PSTR("MaxTemp"), thermalManager.heater_maxtemp[e]);
config_line_e(e, PSTR("MaxTemp"), thermalManager.hotend_maxtemp[e]);
}
#endif
}

6
Marlin/src/gcode/parser.h
View File

@ -390,15 +390,13 @@ public:
}
}
#define TEMP_UNIT(N) parser.to_temp_units(N)
#else // !TEMPERATURE_UNITS_SUPPORT
static inline float to_temp_units(int16_t c) { return (float)c; }
static inline float value_celsius() { return value_float(); }
static inline float value_celsius_diff() { return value_float(); }
#define TEMP_UNIT(N) (N)
#endif // !TEMPERATURE_UNITS_SUPPORT
static inline feedRate_t value_feedrate() { return MMM_TO_MMS(value_linear_units()); }

12
Marlin/src/inc/Conditionals_post.h
View File

@ -2025,11 +2025,17 @@
#undef PIDTEMPBED
#endif
#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
#define BED_OR_CHAMBER 1
#endif
#if HAS_TEMP_COOLER && PIN_EXISTS(COOLER)
#define HAS_COOLER 1
#ifndef COOLER_OVERSHOOT
#define COOLER_OVERSHOOT 2
#endif
#define COOLER_MIN_TARGET (COOLER_MINTEMP + (COOLER_OVERSHOOT))
#define COOLER_MAX_TARGET (COOLER_MAXTEMP - (COOLER_OVERSHOOT))
#endif
#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
#define BED_OR_CHAMBER 1
#endif
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER
#define HAS_TEMP_SENSOR 1

8
Marlin/src/lcd/dwin/e3v2/dwin.cpp
View File

@ -112,12 +112,6 @@
#define MAX_PRINT_SPEED 999
#define MIN_PRINT_SPEED 10
// Temp limits
#if HAS_HOTEND
#define MAX_E_TEMP (HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT))
#define MIN_E_TEMP HEATER_0_MINTEMP
#endif
#if HAS_HEATED_BED
#define MIN_BED_TEMP BED_MINTEMP
#endif
@ -1357,7 +1351,7 @@ void HMI_Move_Z() {
return;
}
// E_Temp limit
LIMIT(HMI_ValueStruct.E_Temp, MIN_E_TEMP, MAX_E_TEMP);
LIMIT(HMI_ValueStruct.E_Temp, HEATER_0_MINTEMP, thermalManager.hotend_max_target(0));
// E_Temp value
DWIN_Draw_IntValue(true, true, 0, font8x16, Color_White, Select_Color, 3, 216, MBASE(temp_line), HMI_ValueStruct.E_Temp);
}

6
Marlin/src/lcd/extui/ui_api.cpp
View File

@ -924,7 +924,7 @@ namespace ExtUI {
enableHeater(heater);
switch (heater) {
#if HAS_HEATED_CHAMBER
case CHAMBER: thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAXTEMP - 10))); break;
case CHAMBER: thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAX_TARGET))); break;
#endif
#if HAS_COOLER
case COOLER: thermalManager.setTargetCooler(LROUND(constrain(value, 0, COOLER_MAXTEMP))); break;
@ -935,7 +935,7 @@ namespace ExtUI {
default: {
#if HAS_HOTEND
const int16_t e = heater - H0;
thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.hotend_max_target(e))), e);
#endif
} break;
}
@ -949,7 +949,7 @@ namespace ExtUI {
#if HAS_HOTEND
const int16_t e = extruder - E0;
enableHeater(extruder);
thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.hotend_max_target(e))), e);
#endif
}

2
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -315,7 +315,7 @@ void menu_backlash();
#if ENABLED(PID_AUTOTUNE_MENU)
#define HOTEND_PID_EDIT_MENU_ITEMS(N) \
_HOTEND_PID_EDIT_MENU_ITEMS(N); \
EDIT_ITEM_FAST_N(int3, N, MSG_PID_AUTOTUNE_E, &autotune_temp[N], 150, thermalManager.heater_maxtemp[N] - HOTEND_OVERSHOOT, []{ _lcd_autotune(heater_id_t(MenuItemBase::itemIndex)); });
EDIT_ITEM_FAST_N(int3, N, MSG_PID_AUTOTUNE_E, &autotune_temp[N], 150, thermalManager.hotend_max_target(N), []{ _lcd_autotune(heater_id_t(MenuItemBase::itemIndex)); });
#else
#define HOTEND_PID_EDIT_MENU_ITEMS(N) _HOTEND_PID_EDIT_MENU_ITEMS(N);
#endif

2
Marlin/src/lcd/menu/menu_filament.cpp
View File

@ -95,7 +95,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
ACTION_ITEM_N_S(m, ui.get_preheat_label(m), MSG_PREHEAT_M, _change_filament_with_preset);
#endif
EDIT_ITEM_FAST_N(int3, extruder, MSG_PREHEAT_CUSTOM, &thermalManager.temp_hotend[extruder].target,
EXTRUDE_MINTEMP, thermalManager.heater_maxtemp[extruder] - HOTEND_OVERSHOOT,
EXTRUDE_MINTEMP, thermalManager.hotend_max_target(extruder),
_change_filament_with_custom
);
END_MENU();

16
Marlin/src/lcd/menu/menu_temperature.cpp
View File

@ -47,11 +47,11 @@
// "Temperature" submenu items
//
void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb) {
void Temperature::lcd_preheat(const uint8_t e, const int8_t indh, const int8_t indb) {
UNUSED(e); UNUSED(indh); UNUSED(indb);
#if HAS_HOTEND
if (indh >= 0 && ui.material_preset[indh].hotend_temp > 0)
setTargetHotend(_MIN(thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, ui.material_preset[indh].hotend_temp), e);
setTargetHotend(_MIN(thermalManager.hotend_max_target(e), ui.material_preset[indh].hotend_temp), e);
#endif
#if HAS_HEATED_BED
if (indb >= 0 && ui.material_preset[indb].bed_temp > 0) setTargetBed(ui.material_preset[indb].bed_temp);
@ -70,7 +70,7 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
void do_preheat_end_m() { _preheat_end(editable.int8, 0); }
#endif
#if HAS_HEATED_BED
inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(-1, -1, m); }
inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(0, -1, m); }
#endif
#if HAS_COOLER
inline void _precool_laser(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); }
@ -163,15 +163,15 @@ void menu_temperature() {
// Nozzle [1-5]:
//
#if HOTENDS == 1
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(0); });
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, thermalManager.hotend_max_target(0), []{ thermalManager.start_watching_hotend(0); });
#elif HAS_MULTI_HOTEND
HOTEND_LOOP()
EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.heater_maxtemp[e] - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.hotend_max_target(e), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
#endif
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
LOOP_S_L_N(e, 1, EXTRUDERS)
EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.heater_maxtemp[0] - (HOTEND_OVERSHOOT));
EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.hotend_max_target(0));
#endif
//
@ -185,7 +185,7 @@ void menu_temperature() {
// Chamber:
//
#if HAS_HEATED_CHAMBER
EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAX_TARGET, thermalManager.start_watching_chamber);
#endif
//
@ -194,7 +194,7 @@ void menu_temperature() {
#if HAS_COOLER
editable.state = cooler.is_enabled();
EDIT_ITEM(bool, MSG_COOLER(TOGGLE), &cooler.state, []{ if (editable.state) cooler.disable(); else cooler.enable(); });
EDIT_ITEM_FAST(int3, MSG_COOLER, &thermalManager.temp_cooler.target, COOLER_MINTEMP + 2, COOLER_MAXTEMP - 2, thermalManager.start_watching_cooler);
EDIT_ITEM_FAST(int3, MSG_COOLER, &thermalManager.temp_cooler.target, COOLER_MIN_TARGET, COOLER_MAX_TARGET, thermalManager.start_watching_cooler);
#endif
//

6
Marlin/src/lcd/menu/menu_tune.cpp
View File

@ -126,15 +126,15 @@ void menu_tune() {
// Nozzle [1-4]:
//
#if HOTENDS == 1
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - HOTEND_OVERSHOOT, []{ thermalManager.start_watching_hotend(0); });
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, thermalManager.hotend_max_target(0), []{ thermalManager.start_watching_hotend(0); });
#elif HAS_MULTI_HOTEND
HOTEND_LOOP()
EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.hotend_max_target(e), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
#endif
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
LOOP_S_L_N(e, 1, EXTRUDERS)
EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.heater_maxtemp[0] - HOTEND_OVERSHOOT);
EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.hotend_max_target(0));
#endif
//

2
Marlin/src/lcd/menu/menu_ubl.cpp
View File

@ -126,7 +126,7 @@ void _lcd_ubl_custom_mesh() {
START_MENU();
BACK_ITEM(MSG_UBL_BUILD_MESH_MENU);
#if HAS_HOTEND
EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - HOTEND_OVERSHOOT);
EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, thermalManager.hotend_max_target(0));
#endif
#if HAS_HEATED_BED
EDIT_ITEM(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, BED_MAX_TARGET);

10
Marlin/src/lcd/tft/touch.cpp
View File

@ -186,25 +186,25 @@ void Touch::touch(touch_control_t *control) {
ui.clear_lcd();
if (heater >= 0) { // HotEnd
#if HOTENDS == 1
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE), &thermalManager.temp_hotend[0].target, 0, thermalManager.heater_maxtemp[0] - 15, []{ thermalManager.start_watching_hotend(0); });
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE), &thermalManager.temp_hotend[0].target, 0, thermalManager.hotend_max_target(0), []{ thermalManager.start_watching_hotend(0); });
#else
MenuItemBase::itemIndex = heater;
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE_N), &thermalManager.temp_hotend[heater].target, 0, thermalManager.heater_maxtemp[heater] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE_N), &thermalManager.temp_hotend[heater].target, 0, thermalManager.hotend_max_target(heater), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
#endif
}
#if HAS_HEATED_BED
else if (heater == H_BED) {
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_BED), &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed);
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_BED), &thermalManager.temp_bed.target, 0, BED_MAX_TARGET, thermalManager.start_watching_bed);
}
#endif
#if HAS_HEATED_CHAMBER
else if (heater == H_CHAMBER) {
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_CHAMBER), &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_CHAMBER), &thermalManager.temp_chamber.target, 0, CHAMBER_MAX_TARGET, thermalManager.start_watching_chamber);
}
#endif
#if HAS_COOLER
else if (heater == H_COOLER) {
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_COOLER), &thermalManager.temp_cooler.target, 0, COOLER_MAXTEMP - 8, thermalManager.start_watching_cooler);
MenuItem_int3::action((const char *)GET_TEXT_F(MSG_COOLER), &thermalManager.temp_cooler.target, 0, COOLER_MAX_TARGET, thermalManager.start_watching_cooler);
}
#endif

4
Marlin/src/module/settings.cpp
View File

@ -3386,10 +3386,10 @@ void MarlinSettings::reset() {
SERIAL_ECHOLNPAIR_P(
PSTR(" M145 S"), i
#if HAS_HOTEND
, PSTR(" H"), TEMP_UNIT(ui.material_preset[i].hotend_temp)
, PSTR(" H"), parser.to_temp_units(ui.material_preset[i].hotend_temp)
#endif
#if HAS_HEATED_BED
, SP_B_STR, TEMP_UNIT(ui.material_preset[i].bed_temp)
, SP_B_STR, parser.to_temp_units(ui.material_preset[i].bed_temp)
#endif
#if HAS_FAN
, PSTR(" F"), ui.material_preset[i].fan_speed

7
Marlin/src/module/temperature.cpp
View File

@ -253,7 +253,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
#if HAS_HOTEND
hotend_info_t Temperature::temp_hotend[HOTEND_TEMPS]; // = { 0 }
const uint16_t Temperature::heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
const uint16_t Temperature::hotend_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
#endif
#if ENABLED(AUTO_POWER_E_FANS)
@ -267,6 +267,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
#if ENABLED(AUTO_POWER_COOLER_FAN)
uint8_t Temperature::coolerfan_speed; // = 0
#endif
#if HAS_FAN
uint8_t Temperature::fan_speed[FAN_COUNT]; // = { 0 }
@ -552,7 +553,7 @@ volatile bool Temperature::raw_temps_ready = false;
TERN_(HAS_AUTO_FAN, next_auto_fan_check_ms = next_temp_ms + 2500UL);
if (target > GHV(CHAMBER_MAX_TARGET, BED_MAX_TARGET, temp_range[heater_id].maxtemp - HOTEND_OVERSHOOT)) {
if (target > GHV(CHAMBER_MAX_TARGET, BED_MAX_TARGET, temp_range[heater_id].maxtemp - (HOTEND_OVERSHOOT))) {
SERIAL_ECHOLNPGM(STR_PID_TEMP_TOO_HIGH);
TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH));
return;
@ -1512,7 +1513,7 @@ void Temperature::manage_heater() {
if (cooler.is_enabled()) {
flag_cooler_state = true; // used to allow M106 fan control when cooler is disabled
if (temp_cooler.target == 0) temp_cooler.target = COOLER_MINTEMP;
if (temp_cooler.target == 0) temp_cooler.target = COOLER_MIN_TARGET;
if (ELAPSED(ms, next_cooler_check_ms)) {
next_cooler_check_ms = ms + COOLER_CHECK_INTERVAL;
if (temp_cooler.celsius > temp_cooler.target) {

15
Marlin/src/module/temperature.h
View File

@ -323,7 +323,8 @@ class Temperature {
#if HAS_HOTEND
#define HOTEND_TEMPS (HOTENDS + ENABLED(TEMP_SENSOR_1_AS_REDUNDANT))
static hotend_info_t temp_hotend[HOTEND_TEMPS];
static const uint16_t heater_maxtemp[HOTENDS];
static const uint16_t hotend_maxtemp[HOTENDS];
FORCE_INLINE static uint16_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); }
#endif
TERN_(HAS_HEATED_BED, static bed_info_t temp_bed);
TERN_(HAS_TEMP_PROBE, static probe_info_t temp_probe);
@ -639,7 +640,7 @@ class Temperature {
start_preheat_time(ee);
#endif
TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on());
temp_hotend[ee].target = _MIN(celsius, temp_range[ee].maxtemp - HOTEND_OVERSHOOT);
temp_hotend[ee].target = _MIN(celsius, hotend_max_target(ee));
start_watching_hotend(ee);
}
@ -785,13 +786,7 @@ class Temperature {
#if HAS_COOLER
static void setTargetCooler(const int16_t celsius) {
temp_cooler.target =
#ifdef COOLER_MAXTEMP
_MIN(celsius, COOLER_MAXTEMP - 10)
#else
celsius
#endif
;
temp_cooler.target = constrain(celsius, COOLER_MIN_TARGET, COOLER_MAX_TARGET);
start_watching_cooler();
}
#endif
@ -878,7 +873,7 @@ class Temperature {
TERN_(HAS_DISPLAY, static void set_heating_message(const uint8_t e));
#if HAS_LCD_MENU && HAS_TEMPERATURE
static void lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb);
static void lcd_preheat(const uint8_t e, const int8_t indh, const int8_t indb);
#endif
private: