Update Slovak language (#18210)

This commit is contained in:
Roman Moravčík 2020-06-08 02:44:04 +02:00 committed by GitHub
parent 2840e3a8f9
commit 941d72fd8d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -266,6 +266,10 @@ namespace Language_sk {
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Vyp");
PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("PID kalibrácia");
PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("PID kalibrácia *");
PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT("PID kal. dokončená");
PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Auto-kal. zlyhala. Zlý extrúder.");
PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT("Auto-kal. zlyhala. Príliš vysoká tepl.");
PROGMEM Language_Str MSG_PID_TIMEOUT = _UxGT("Auto-kal. zlyhala! Čas vypršal.");
PROGMEM Language_Str MSG_SELECT = _UxGT("Vybrať");
PROGMEM Language_Str MSG_SELECT_E = _UxGT("Vybrať *");
PROGMEM Language_Str MSG_ACC = _UxGT("Zrýchlenie");
@ -291,6 +295,8 @@ namespace Language_sk {
PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *");
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retrakt");
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-prejazd");
PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Max. frekvencia");
PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Min. posun");
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Kroky/mm");
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("krokov/mm");
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("krokov/mm");
@ -315,7 +321,7 @@ namespace Language_sk {
PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("Chyba: EEPROM CRC");
PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("Chyba: EEPROM Index");
PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT("Chyba: Verzia EEPROM");
PROGMEM Language_Str MSG_SETTINGS_STORED = _UxGT("Nastav. uložené");
PROGMEM Language_Str MSG_SETTINGS_STORED = _UxGT("Nastavenie uložené");
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("Aktualizovať z SD");
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("Reštart. tlačiar.");
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Obnoviť");
@ -328,6 +334,7 @@ namespace Language_sk {
PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("Zastaviť");
PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("Tlačiť");
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("Vynulovať");
PROGMEM Language_Str MSG_BUTTON_IGNORE = _UxGT("Ignorovať");
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("Zrušiť");
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("Hotovo");
PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("Naspäť");
@ -361,11 +368,22 @@ namespace Language_sk {
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V");
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("AutoRetr.");
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("Dĺžka výmeny");
PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA = _UxGT("Vymeniť naviac");
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("Dĺžka vytlačenia");
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("Výmena nástroja");
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Zdvihnúť Z");
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD = _UxGT("Primárna rýchl.");
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD = _UxGT("Rýchl. retrakcie");
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Primárna rýchl.");
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Rýchl. retrakcie");
PROGMEM Language_Str MSG_FILAMENT_PARK_ENABLED = _UxGT("Parkovať hlavu");
PROGMEM Language_Str MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Rýchl. obnovenia");
PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("Rýchlosť vent.");
PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_TIME = _UxGT("Doba fúkania");
PROGMEM Language_Str MSG_TOOL_MIGRATION_ON = _UxGT("Auto-Zap");
PROGMEM Language_Str MSG_TOOL_MIGRATION_OFF = _UxGT("Auto-Vyp");
PROGMEM Language_Str MSG_TOOL_MIGRATION = _UxGT("Výmena nástroja");
PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO = _UxGT("Auto-výmena");
PROGMEM Language_Str MSG_TOOL_MIGRATION_END = _UxGT("Posl. extruder");
PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP = _UxGT("Vymeniť za *");
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Vymeniť filament");
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Vymeniť filament *");
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Zaviesť filament");
@ -460,6 +478,7 @@ namespace Language_sk {
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("Protokol");
PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("Tepl. ochrana: VYP");
PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("Tepl. ochrana: ZAP");
PROGMEM Language_Str MSG_HOTEND_IDLE_TIMEOUT = _UxGT("Vypr.čas nečinnosti");
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Osvetlenie");
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Jas svetla");
@ -549,6 +568,9 @@ namespace Language_sk {
PROGMEM Language_Str MSG_SNAKE = _UxGT("Had");
PROGMEM Language_Str MSG_MAZE = _UxGT("Bludisko");
PROGMEM Language_Str MSG_BAD_PAGE = _UxGT("Chyb. index stránky");
PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT("Chyb. rých. stránky");
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display