bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

G92, subcodes flag cleanup

Browse Source
This commit is contained in:
Scott Lahteine 2021-02-23 16:08:00 -06:00 committed by Scott Lahteine
parent 1ab1c62f03
commit 8fca59f63b
4 changed files with 52 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

79
Marlin/src/gcode/geometry/G92.cpp
View File

@ -29,77 +29,90 @@
#endif
/**
* G92: Set current position to given X Y Z E
* G92: Set the Current Position to the given X Y Z E values.
*
* Behind the scenes the G92 command may modify the Current Position
* or the Position Shift depending on settings and sub-commands.
*
* Since E has no Workspace Offset, it is always set directly.
*
* Without Workspace Offsets (e.g., with NO_WORKSPACE_OFFSETS):
* G92 : Set NATIVE Current Position to the given X Y Z E.
*
* Using Workspace Offsets (default Marlin behavior):
* G92 : Modify Workspace Offsets so the reported position shows the given X Y Z E.
* G92.1 : Zero XYZ Workspace Offsets (so the reported position = the native position).
*
* With POWER_LOSS_RECOVERY:
* G92.9 : Set NATIVE Current Position to the given X Y Z E.
*/
void GcodeSuite::G92() {
bool sync_E = false, sync_XYZ = false;
bool sync_E = false, sync_XYZE = false;
#if ENABLED(USE_GCODE_SUBCODES)
#if USE_GCODE_SUBCODES
const uint8_t subcode_G92 = parser.subcode;
#else
constexpr uint8_t subcode_G92 = 0;
#endif
switch (subcode_G92) {
default: break;
#if ENABLED(CNC_COORDINATE_SYSTEMS)
case 1: {
// Zero the G92 values and restore current position
#if !IS_SCARA
LOOP_XYZ(i) if (position_shift[i]) {
position_shift[i] = 0;
update_workspace_offset((AxisEnum)i);
}
#endif // Not SCARA
} return;
default: return; // Ignore unknown G92.x
#if ENABLED(CNC_COORDINATE_SYSTEMS) && !IS_SCARA
case 1: // G92.1 - Zero the Workspace Offset
LOOP_XYZ(i) if (position_shift[i]) {
position_shift[i] = 0;
update_workspace_offset((AxisEnum)i);
}
break;
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
case 9: {
case 9: // G92.9 - Set Current Position directly (like Marlin 1.0)
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {
if (i == E_AXIS) sync_E = true; else sync_XYZE = true;
current_position[i] = parser.value_axis_units((AxisEnum)i);
if (i == E_AXIS) sync_E = true; else sync_XYZ = true;
}
}
} break;
break;
#endif
case 0: {
case 0:
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {
const float l = parser.value_axis_units((AxisEnum)i),
v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i),
d = v - current_position[i];
const float l = parser.value_axis_units((AxisEnum)i), // Given axis coordinate value, converted to millimeters
v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i), // Axis position in NATIVE space (applying the existing offset)
d = v - current_position[i]; // How much is the current axis position altered by?
if (!NEAR_ZERO(d)) {
#if IS_SCARA || !HAS_POSITION_SHIFT
if (i == E_AXIS) sync_E = true; else sync_XYZ = true;
current_position[i] = v; // Without workspaces revert to Marlin 1.0 behavior
#elif HAS_POSITION_SHIFT
#if HAS_POSITION_SHIFT && !IS_SCARA // When using workspaces...
if (i == E_AXIS) {
sync_E = true;
current_position.e = v; // When using coordinate spaces, only E is set directly
current_position.e = v; // ...E is still set directly
}
else {
position_shift[i] += d; // Other axes simply offset the coordinate space
position_shift[i] += d; // ...but other axes offset the workspace.
update_workspace_offset((AxisEnum)i);
}
#else // Without workspaces...
if (i == E_AXIS) sync_E = true; else sync_XYZE = true;
current_position[i] = v; // ...set Current Position directly (like Marlin 1.0)
#endif
}
}
}
} break;
break;
}
#if ENABLED(CNC_COORDINATE_SYSTEMS)
// Apply workspace offset to the active coordinate system
// Apply Workspace Offset to the active coordinate system
if (WITHIN(active_coordinate_system, 0, MAX_COORDINATE_SYSTEMS - 1))
coordinate_system[active_coordinate_system] = position_shift;
#endif
if (sync_XYZ) sync_plan_position();
if (sync_XYZE) sync_plan_position();
else if (sync_E) sync_plan_position_e();
#if DISABLED(DIRECT_STEPPING)
report_current_position();
#endif
IF_DISABLED(DIRECT_STEPPING, report_current_position());
}

6
Marlin/src/gcode/parser.cpp
View File

@ -47,13 +47,13 @@ char *GCodeParser::command_ptr,
char GCodeParser::command_letter;
uint16_t GCodeParser::codenum;
#if ENABLED(USE_GCODE_SUBCODES)
#if USE_GCODE_SUBCODES
uint8_t GCodeParser::subcode;
#endif
#if ENABLED(GCODE_MOTION_MODES)
int16_t GCodeParser::motion_mode_codenum = -1;
#if ENABLED(USE_GCODE_SUBCODES)
#if USE_GCODE_SUBCODES
uint8_t GCodeParser::motion_mode_subcode;
#endif
#endif
@ -189,7 +189,7 @@ void GCodeParser::parse(char *p) {
}
// Allow for decimal point in command
#if ENABLED(USE_GCODE_SUBCODES)
#if USE_GCODE_SUBCODES
if (*p == '.') {
p++;
while (NUMERIC(*p))

4
Marlin/src/gcode/parser.h
View File

@ -85,13 +85,13 @@ public:
*string_arg, // string of command line
command_letter; // G, M, or T
static uint16_t codenum; // 123
#if ENABLED(USE_GCODE_SUBCODES)
#if USE_GCODE_SUBCODES
static uint8_t subcode; // .1
#endif
#if ENABLED(GCODE_MOTION_MODES)
static int16_t motion_mode_codenum;
#if ENABLED(USE_GCODE_SUBCODES)
#if USE_GCODE_SUBCODES
static uint8_t motion_mode_subcode;
#endif
FORCE_INLINE static void cancel_motion_mode() { motion_mode_codenum = -1; }

2
Marlin/src/inc/Conditionals_post.h
View File

@ -2758,7 +2758,7 @@
// Add commands that need sub-codes to this list
#if ANY(G38_PROBE_TARGET, CNC_COORDINATE_SYSTEMS, POWER_LOSS_RECOVERY)
#define USE_GCODE_SUBCODES
#define USE_GCODE_SUBCODES 1
#endif
// Parking Extruder