bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Fix various errors, warnings in example config builds (#19686)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Jason Smith 2020-10-11 17:06:57 -07:00 committed by Scott Lahteine
parent 2c7b5fe1f2
commit 8b4f82cd07
11 changed files with 141 additions and 165 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -511,11 +511,9 @@ void GcodeSuite::G26() {
g26_keep_heaters_on = parser.boolval('K');
// Accept 'I' if temperature presets are defined
const uint8_t preset_index = (0
#if PREHEAT_COUNT
+ (parser.seenval('I') ? _MIN(parser.value_byte(), PREHEAT_COUNT - 1) + 1 : 0)
const uint8_t preset_index = parser.seenval('I') ? _MIN(parser.value_byte(), PREHEAT_COUNT - 1) + 1 : 0;
#endif
);
#if HAS_HEATED_BED

2
Marlin/src/gcode/motion/M290.cpp
View File

@ -127,7 +127,7 @@ void GcodeSuite::M290() {
#else
PSTR("Babystep Z")
#endif
, babystep.axis_total[BS_AXIS_IND(Z_AXIS)]
, babystep.axis_total[BS_TOTAL_IND(Z_AXIS)]
);
}
#endif

2
Marlin/src/lcd/dogm/dogm_Statusscreen.h
View File

@ -1341,7 +1341,7 @@
#undef STATUS_LOGO_WIDTH
#endif
#if (HAS_MULTI_HOTEND && STATUS_LOGO_WIDTH && BED_OR_CHAMBER_OR_FAN) || (HOTENDS >= 3 && !BED_OR_CHAMBER_OR_FAN)
#if !defined(STATUS_HEATERS_X) && ((HAS_MULTI_HOTEND && STATUS_LOGO_WIDTH && BED_OR_CHAMBER_OR_FAN) || (HOTENDS >= 3 && !BED_OR_CHAMBER_OR_FAN))
#define _STATUS_HEATERS_X(H,S,N) ((LCD_PIXEL_WIDTH - (H * (S + N)) - (_EXTRA_WIDTH) + (STATUS_LOGO_WIDTH)) / 2)
#if STATUS_HOTEND1_WIDTH
#if HOTENDS > 2

18
Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp
View File

@ -46,7 +46,8 @@
extern lv_group_t * g;
static lv_obj_t * scr;
static lv_obj_t *labelExt1, * labelExt2, * labelFan, * labelZpos, * labelTime;
static lv_obj_t *labelExt1, * labelFan, * labelZpos, * labelTime;
TERN_(HAS_MULTI_EXTRUDER, static lv_obj_t *labelExt2;)
static lv_obj_t *labelPause, * labelStop, * labelOperat;
static lv_obj_t * bar1, *bar1ValueText;
static lv_obj_t * buttonPause, *buttonOperat, *buttonStop;
@ -137,9 +138,6 @@ static void event_handler(lv_obj_t * obj, lv_event_t event) {
}
void lv_draw_printing(void) {
lv_obj_t *buttonExt1, *buttonExt2, *buttonFanstate, *buttonZpos, *buttonTime;
TERN_(HAS_HEATED_BED, lv_obj_t * buttonBedstate);
disp_state_stack._disp_index = 0;
ZERO(disp_state_stack._disp_state);
disp_state_stack._disp_state[disp_state_stack._disp_index] = PRINTING_UI;
@ -162,16 +160,16 @@ void lv_draw_printing(void) {
lv_refr_now(lv_refr_get_disp_refreshing());
// Create image buttons
buttonExt1 = lv_img_create(scr, NULL);
lv_obj_t *buttonExt1 = lv_img_create(scr, NULL);
#if HAS_MULTI_EXTRUDER
buttonExt2 = lv_img_create(scr, NULL);
lv_obj_t *buttonExt2 = lv_img_create(scr, NULL);
#endif
#if HAS_HEATED_BED
buttonBedstate = lv_img_create(scr, NULL);
lv_obj_t *buttonBedstate = lv_img_create(scr, NULL);
#endif
buttonFanstate = lv_img_create(scr, NULL);
buttonTime = lv_img_create(scr, NULL);
buttonZpos = lv_img_create(scr, NULL);
lv_obj_t *buttonFanstate = lv_img_create(scr, NULL);
lv_obj_t *buttonTime = lv_img_create(scr, NULL);
lv_obj_t *buttonZpos = lv_img_create(scr, NULL);
buttonPause = lv_imgbtn_create(scr, NULL);
buttonStop = lv_imgbtn_create(scr, NULL);
buttonOperat = lv_imgbtn_create(scr, NULL);

6
Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp
View File

@ -799,13 +799,14 @@ void lv_encoder_pin_init() {
//static const int8_t encoderDirection = 1;
//static int16_t enc_Direction;
void lv_update_encoder() {
static uint8_t buttons;
static uint32_t encoder_time1;
uint32_t tmpTime, diffTime = 0;
tmpTime = millis();
diffTime = getTickDiff(tmpTime, encoder_time1);
if (diffTime > 50) {
#if HAS_ENCODER_WHEEL
#if ANY_BUTTON(EN1, EN2, ENC, BACK)
uint8_t newbutton = 0;
@ -829,9 +830,8 @@ void lv_encoder_pin_init() {
#endif
buttons = newbutton;
#if HAS_ENCODER_WHEEL
static uint8_t buttons = newbutton;
static uint8_t lastEncoderBits;
#define encrot0 0

40
Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.cpp
View File

@ -110,23 +110,16 @@ const char *resultMessages[] = {
// 230400b always manages to connect.
static const uint32_t uploadBaudRates[] = { 460800, 230400, 115200, 74880 };
signed char IsReady() {
return esp_upload.state == upload_idle;
}
void uploadPort_write(const uint8_t *buf, size_t len) {
#if 0
int i;
for (i = 0; i < len; i++) {
while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET) { /* nada */ }
USART_SendData(USART1, *(buf + i));
}
#endif
@ -138,28 +131,22 @@ char uploadPort_read() {
return retChar;
else
return 0;
}
int uploadPort_available() {
return usartFifoAvailable(&WifiRxFifo);
}
void uploadPort_begin() {
esp_port_begin(1);
}
void uploadPort_close() {
//WIFI_COM.end();
//WIFI_COM.begin(115200, true);
esp_port_begin(0);
}
void flushInput() {
while (uploadPort_available() != 0) {
(void)uploadPort_read();
@ -304,7 +291,6 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t
*bodyLen = 0;
while (state != done) {
uint8_t c;
EspUploadResult stat;
@ -397,7 +383,7 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t
opRet = (uint8_t)getData(1, hdr, 1);
// Sync packets often provoke a response with a zero opcode instead of ESP_SYNC
if (resp != 0x01 || opRet != op) {
//debug//printf("resp %02x %02x\n", resp, opRet);
//printf("resp %02x %02x\n", resp, opRet); //debug
return respHeader;
}
@ -432,7 +418,6 @@ void _writePacket(const uint8_t *data, size_t len) {
// 0xC0 and 0xDB replaced by the two-byte sequences {0xDB, 0xDC} and {0xDB, 0xDD} respectively.
void writePacket(const uint8_t *hdr, size_t hdrLen, const uint8_t *data, size_t dataLen) {
WriteByteRaw(0xC0); // send the packet start character
_writePacket(hdr, hdrLen); // send the header
_writePacket(data, dataLen); // send the data block
@ -460,13 +445,11 @@ void sendCommand(uint8_t op, uint32_t checkVal, const uint8_t *data, size_t data
// send the packet
//flushInput();
if (op == ESP_SYNC) {
if (op == ESP_SYNC)
writePacketRaw(hdr, sizeof(hdr), data, dataLen);
}
else {
else
writePacket(hdr, sizeof(hdr), data, dataLen);
}
}
// Send a command to the attached device together with the supplied data, if any, and get the response
EspUploadResult doCommand(uint8_t op, const uint8_t *data, size_t dataLen, uint32_t checkVal, uint32_t *valp, uint32_t msTimeout) {
@ -476,9 +459,8 @@ EspUploadResult doCommand(uint8_t op, const uint8_t *data, size_t dataLen, uint3
sendCommand(op, checkVal, data, dataLen);
stat = readPacket(op, valp, &bodyLen, msTimeout);
if (stat == success && bodyLen != 2) {
if (stat == success && bodyLen != 2)
stat = badReply;
}
return stat;
}
@ -611,6 +593,8 @@ EspUploadResult flashWriteBlock(uint16_t flashParmVal, uint16_t flashParmMask) {
//printf("Upload %d\%\n", ftell(&esp_upload.uploadFile) * 100 / esp_upload.fileSize);
return stat;
#else
return success;
#endif
}
@ -634,7 +618,6 @@ void upload_spin() {
//uploadPort.begin(baud);
//uploadPort_close();
uploadPort_begin();
wifi_delay(2000);
@ -654,7 +637,7 @@ void upload_spin() {
esp_upload.lastAttemptTime = getWifiTick();
if (res == success) {
// Successful connection
// //MessageF(" success on attempt %d\n", (connectAttemptNumber % retriesPerBaudRate) + 1);
//MessageF(" success on attempt %d\n", (connectAttemptNumber % retriesPerBaudRate) + 1);
//printf("connect success\n");
esp_upload.state = erasing;
}
@ -675,11 +658,10 @@ void upload_spin() {
const uint32_t sectorSize = 4096;
const uint32_t numSectors = (esp_upload.fileSize + sectorSize - 1)/sectorSize;
const uint32_t startSector = esp_upload.uploadAddress/sectorSize;
uint32_t headSectors = sectorsPerBlock - (startSector % sectorsPerBlock);
if (numSectors < headSectors) {
headSectors = numSectors;
}
uint32_t headSectors = sectorsPerBlock - (startSector % sectorsPerBlock);
NOMORE(headSectors, numSectors);
eraseSize = (numSectors < 2 * headSectors)
? (numSectors + 1) / 2 * sectorSize
: (numSectors - headSectors) * sectorSize;

2
Marlin/src/lcd/menu/menu_delta_calibrate.cpp
View File

@ -118,7 +118,7 @@ void lcd_delta_settings() {
}
void menu_delta_calibrate() {
const bool all_homed = all_axes_homed();
TERN_(DELTA_CALIBRATION_MENU, const bool all_homed = all_axes_homed()); // Acquire ahead of loop
START_MENU();
BACK_ITEM(MSG_MAIN);

3
Marlin/src/lcd/menu/menu_ubl.cpp
View File

@ -188,11 +188,10 @@ void _lcd_ubl_edit_mesh() {
*/
void _lcd_ubl_validate_custom_mesh() {
char ubl_lcd_gcode[24];
const int16_t temp = TERN(HAS_HEATED_BED, custom_bed_temp, 0);
sprintf_P(ubl_lcd_gcode, PSTR("G28\nG26 C P H%" PRIi16 TERN_(HAS_HEATED_BED, " B%" PRIi16))
, custom_hotend_temp
#if HAS_HEATED_BED
, temp
, custom_bed_temp
#endif
);
queue.inject(ubl_lcd_gcode);

3
Marlin/src/module/thermistor/thermistor_666.h
View File

@ -33,8 +33,7 @@
* B: 0.00031362
* C: -2.03978e-07
*/
#define NUMTEMPS 61
const short temptable_666[NUMTEMPS][2] PROGMEM = {
const temp_entry_t temptable_666[] PROGMEM = {
{ OV( 1), 794 },
{ OV( 18), 288 },
{ OV( 35), 234 },

29
Marlin/src/pins/sensitive_pins.h
View File

@ -608,12 +608,6 @@
#define _Z_PROBE
#endif
#if TEMP_SENSOR_BED && PIN_EXISTS(HEATER_BED)
#define _HEATER_BED HEATER_BED_PIN,
#else
#define _HEATER_BED
#endif
#if PIN_EXISTS(FAN)
#define _FAN0 FAN_PIN,
#else
@ -660,21 +654,26 @@
#define _FANC
#endif
#if PIN_EXISTS(HEATER_BED) && PIN_EXISTS(TEMP_BED)
#if TEMP_SENSOR_BED && PINS_EXIST(TEMP_BED, HEATER_BED)
#define _BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN),
#else
#define _BED_PINS
#endif
#if PIN_EXISTS(TEMP_CHAMBER)
#define __CHAMBER_PINS CHAMBER_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_CHAMBER_PIN),
#if TEMP_SENSOR_CHAMBER && PIN_EXISTS(TEMP_CHAMBER)
#define _CHAMBER_TEMP analogInputToDigitalPin(TEMP_CHAMBER_PIN),
#else
#define __CHAMBER_PINS
#define _CHAMBER_TEMP
#endif
#if PIN_EXISTS(HEATER_CHAMBER)
#define _CHAMBER_PINS __CHAMBER_PINS HEATER_CHAMBER_PIN,
#if TEMP_SENSOR_CHAMBER && PINS_EXIST(TEMP_CHAMBER, HEATER_CHAMBER)
#define _CHAMBER_HEATER HEATER_CHAMBER_PIN,
#else
#define _CHAMBER_PINS
#define _CHAMBER_HEATER
#endif
#if TEMP_SENSOR_CHAMBER && PINS_EXIST(TEMP_CHAMBER, CHAMBER_AUTO_FAN)
#define _CHAMBER_FAN CHAMBER_AUTO_FAN_PIN,
#else
#define _CHAMBER_FAN
#endif
#ifndef HAL_SENSITIVE_PINS
@ -685,6 +684,6 @@
_X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS _Z_PROBE \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _E6_PINS _E7_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS _H6_PINS _H7_PINS \
_PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \
_BED_PINS _CHAMBER_PINS HAL_SENSITIVE_PINS \
_PS_ON _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \
_BED_PINS _CHAMBER_TEMP _CHAMBER_HEATER _CHAMBER_FAN HAL_SENSITIVE_PINS \
}

1
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
View File

@ -200,6 +200,7 @@
#elif SD_CONNECTION_IS(ONBOARD)
#define SDIO_SUPPORT
#define SD_DETECT_PIN PD12
#define ONBOARD_SD_CS_PIN PC11
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif