bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Fix at90usb1286 build (#19687)

Browse Source 
* Skip check for USBCON during dependency detection
* Ignore incompatible Teensy_ADC library, which requires Teensy >= 3
* Add IS_AT90USB

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Jason Smith 2020-10-11 16:13:01 -07:00 committed by Scott Lahteine
parent a30e8baf3e
commit 2c7b5fe1f2
10 changed files with 19 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/HAL/AVR/HAL.h
View File

@ -25,7 +25,7 @@
#include "watchdog.h"
#include "math.h"
#ifdef USBCON
#ifdef IS_AT90USB
#include <HardwareSerial.h>
#else
#define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
@ -81,7 +81,7 @@ typedef int8_t pin_t;
//extern uint8_t MCUSR;
// Serial ports
#ifdef USBCON
#ifdef IS_AT90USB
#define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
#else
#if !WITHIN(SERIAL_PORT, -1, 3)

6
Marlin/src/HAL/AVR/MarlinSerial.cpp
View File

@ -38,7 +38,7 @@
#include "../../inc/MarlinConfig.h"
#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#if !IS_AT90USB && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#include "MarlinSerial.h"
#include "../../MarlinCore.h"
@ -792,10 +792,10 @@ MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
#endif
#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
#endif // !IS_AT90USB && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
// For AT90USB targets use the UART for BT interfacing
#if defined(USBCON) && ENABLED(BLUETOOTH)
#if BOTH(IS_AT90USB, BLUETOOTH)
HardwareSerial bluetoothSerial;
#endif

2
Marlin/src/HAL/AVR/MarlinSerial.h
View File

@ -327,6 +327,6 @@
#endif
// Use the UART for Bluetooth in AT90USB configurations
#if defined(USBCON) && ENABLED(BLUETOOTH)
#if BOTH(IS_AT90USB, BLUETOOTH)
extern HardwareSerial bluetoothSerial;
#endif

3
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
View File

@ -22,7 +22,6 @@
#if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
#include "../HAL.h"
#include <U8glib.h>
#undef SPI_SPEED
@ -161,5 +160,5 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // HAS_MARLINUI_U8GLIB
#endif // HAS_MARLINUI_U8GLIB && FORCE_SOFT_SPI
#endif // STM32F1

4
Marlin/src/gcode/control/M111.cpp
View File

@ -55,7 +55,7 @@ void GcodeSuite::M111() {
}
else {
SERIAL_ECHOPGM(STR_DEBUG_OFF);
#if !defined(__AVR__) || !defined(USBCON)
#if !IS_AT90USB
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
SERIAL_ECHOPAIR("\nBuffer Overruns: ", MYSERIAL0.buffer_overruns());
#endif
@ -71,7 +71,7 @@ void GcodeSuite::M111() {
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOPAIR("\nMax RX Queue Size: ", MYSERIAL0.rxMaxEnqueued());
#endif
#endif // !defined(__AVR__) || !defined(USBCON)
#endif // !IS_AT90USB
}
SERIAL_EOL();
}

2
Marlin/src/gcode/queue.cpp
View File

@ -624,7 +624,7 @@ void GCodeQueue::advance() {
card.closefile();
SERIAL_ECHOLNPGM(STR_FILE_SAVED);
#if !defined(__AVR__) || !defined(USBCON)
#if !IS_AT90USB
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOLNPAIR("Dropped bytes: ", MYSERIAL0.dropped());
#endif

8
Marlin/src/inc/Conditionals_adv.h
View File

@ -208,7 +208,10 @@
#define NEEDS_HARDWARE_PWM 1
#endif
#if !defined(__AVR__) || !defined(USBCON)
#if defined(__AVR__) && defined(USBCON)
#define IS_AT90USB 1
#undef SERIAL_XON_XOFF // Not supported on USB-native devices
#else
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
@ -220,9 +223,6 @@
#ifndef TX_BUFFER_SIZE
#define TX_BUFFER_SIZE 32
#endif
#else
// SERIAL_XON_XOFF not supported on USB-native devices
#undef SERIAL_XON_XOFF
#endif
#if ENABLED(HOST_ACTION_COMMANDS)

6
Marlin/src/inc/SanityCheck.h
View File

@ -582,7 +582,7 @@
/**
* Serial
*/
#if !(defined(__AVR__) && defined(USBCON))
#if !IS_AT90USB
#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
#error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
#elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
@ -2104,9 +2104,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#endif
/**
* emergency-command parser
* Emergency Command Parser
*/
#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
#if BOTH(IS_AT90USB, EMERGENCY_PARSER)
#error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
#endif

2
Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h
View File

@ -67,7 +67,7 @@
#error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
#endif
#ifndef USBCON
#if !defined(__MARLIN_DEPS__) && !defined(USBCON)
#error "USBCON should be defined by the platform for this board."
#endif

1
platformio.ini
View File

@ -557,6 +557,7 @@ build_unflags = -g -ggdb
platform = teensy
extends = common_avr8
board = at90usb1286
lib_ignore = ${env:common_avr8.lib_ignore} Teensy_ADC
#
# AT90USB1286 boards using DFU bootloader