bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

G26 Hilbert Curve followup (#21480)

Browse Source
This commit is contained in:
Marcio T 2021-04-01 18:12:00 -06:00 committed by Scott Lahteine
parent b1be96e40e
commit 82e6a2ed62
24 changed files with 442 additions and 444 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/core/utility.h
View File

@ -34,7 +34,7 @@ void safe_delay(millis_t ms);
inline void serial_delay(const millis_t) {}
#endif
#if GRID_MAX_POINTS_X && GRID_MAX_POINTS_Y
#if (GRID_MAX_POINTS_X) && (GRID_MAX_POINTS_Y)
// 16x16 bit arrays
template <int W, int H>

38
Marlin/src/feature/bedlevel/abl/abl.cpp
View File

@ -85,9 +85,9 @@ static void extrapolate_one_point(const uint8_t x, const uint8_t y, const int8_t
//#define EXTRAPOLATE_FROM_EDGE
#if ENABLED(EXTRAPOLATE_FROM_EDGE)
#if GRID_MAX_POINTS_X < GRID_MAX_POINTS_Y
#if (GRID_MAX_POINTS_X) < (GRID_MAX_POINTS_Y)
#define HALF_IN_X
#elif GRID_MAX_POINTS_Y < GRID_MAX_POINTS_X
#elif (GRID_MAX_POINTS_Y) < (GRID_MAX_POINTS_X)
#define HALF_IN_Y
#endif
#endif
@ -98,23 +98,23 @@ static void extrapolate_one_point(const uint8_t x, const uint8_t y, const int8_t
*/
void extrapolate_unprobed_bed_level() {
#ifdef HALF_IN_X
constexpr uint8_t ctrx2 = 0, xlen = GRID_MAX_POINTS_X - 1;
constexpr uint8_t ctrx2 = 0, xend = GRID_MAX_POINTS_X - 1;
#else
constexpr uint8_t ctrx1 = (GRID_MAX_POINTS_X - 1) / 2, // left-of-center
ctrx2 = (GRID_MAX_POINTS_X) / 2, // right-of-center
xlen = ctrx1;
constexpr uint8_t ctrx1 = (GRID_MAX_CELLS_X) / 2, // left-of-center
ctrx2 = (GRID_MAX_POINTS_X) / 2, // right-of-center
xend = ctrx1;
#endif
#ifdef HALF_IN_Y
constexpr uint8_t ctry2 = 0, ylen = GRID_MAX_POINTS_Y - 1;
constexpr uint8_t ctry2 = 0, yend = GRID_MAX_POINTS_Y - 1;
#else
constexpr uint8_t ctry1 = (GRID_MAX_POINTS_Y - 1) / 2, // top-of-center
ctry2 = (GRID_MAX_POINTS_Y) / 2, // bottom-of-center
ylen = ctry1;
constexpr uint8_t ctry1 = (GRID_MAX_CELLS_Y) / 2, // top-of-center
ctry2 = (GRID_MAX_POINTS_Y) / 2, // bottom-of-center
yend = ctry1;
#endif
LOOP_LE_N(xo, xlen)
LOOP_LE_N(yo, ylen) {
LOOP_LE_N(xo, xend)
LOOP_LE_N(yo, yend) {
uint8_t x2 = ctrx2 + xo, y2 = ctry2 + yo;
#ifndef HALF_IN_X
const uint8_t x1 = ctrx1 - xo;
@ -143,8 +143,8 @@ void print_bilinear_leveling_grid() {
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
#define ABL_GRID_POINTS_VIRT_X (GRID_MAX_POINTS_X - 1) * (BILINEAR_SUBDIVISIONS) + 1
#define ABL_GRID_POINTS_VIRT_Y (GRID_MAX_POINTS_Y - 1) * (BILINEAR_SUBDIVISIONS) + 1
#define ABL_GRID_POINTS_VIRT_X GRID_MAX_CELLS_X * (BILINEAR_SUBDIVISIONS) + 1
#define ABL_GRID_POINTS_VIRT_Y GRID_MAX_CELLS_Y * (BILINEAR_SUBDIVISIONS) + 1
#define ABL_TEMP_POINTS_X (GRID_MAX_POINTS_X + 2)
#define ABL_TEMP_POINTS_Y (GRID_MAX_POINTS_Y + 2)
float z_values_virt[ABL_GRID_POINTS_VIRT_X][ABL_GRID_POINTS_VIRT_Y];
@ -161,7 +161,7 @@ void print_bilinear_leveling_grid() {
#define LINEAR_EXTRAPOLATION(E, I) ((E) * 2 - (I))
float bed_level_virt_coord(const uint8_t x, const uint8_t y) {
uint8_t ep = 0, ip = 1;
if (x > GRID_MAX_POINTS_X + 1 || y > GRID_MAX_POINTS_Y + 1) {
if (x > (GRID_MAX_POINTS_X) + 1 || y > (GRID_MAX_POINTS_Y) + 1) {
// The requested point requires extrapolating two points beyond the mesh.
// These values are only requested for the edges of the mesh, which are always an actual mesh point,
// and do not require interpolation. When interpolation is not needed, this "Mesh + 2" point is
@ -171,8 +171,8 @@ void print_bilinear_leveling_grid() {
}
if (!x || x == ABL_TEMP_POINTS_X - 1) {
if (x) {
ep = GRID_MAX_POINTS_X - 1;
ip = GRID_MAX_POINTS_X - 2;
ep = (GRID_MAX_POINTS_X) - 1;
ip = GRID_MAX_CELLS_X - 1;
}
if (WITHIN(y, 1, ABL_TEMP_POINTS_Y - 2))
return LINEAR_EXTRAPOLATION(
@ -187,8 +187,8 @@ void print_bilinear_leveling_grid() {
}
if (!y || y == ABL_TEMP_POINTS_Y - 1) {
if (y) {
ep = GRID_MAX_POINTS_Y - 1;
ip = GRID_MAX_POINTS_Y - 2;
ep = (GRID_MAX_POINTS_Y) - 1;
ip = GRID_MAX_CELLS_Y - 1;
}
if (WITHIN(x, 1, ABL_TEMP_POINTS_X - 2))
return LINEAR_EXTRAPOLATION(

8
Marlin/src/feature/bedlevel/hilbert_curve.cpp
View File

@ -36,7 +36,7 @@ constexpr uint8_t dim = _BV(ord);
static inline bool eval_candidate(int8_t x, int8_t y, hilbert_curve::callback_ptr func, void *data) {
// The print bed likely has fewer points than the full Hilbert
// curve, so cull unecessary points
return x < GRID_MAX_POINTS_X && y < GRID_MAX_POINTS_Y ? func(x, y, data) : false;
return x < (GRID_MAX_POINTS_X) && y < (GRID_MAX_POINTS_Y) ? func(x, y, data) : false;
}
bool hilbert_curve::hilbert(int8_t x, int8_t y, int8_t xi, int8_t xj, int8_t yi, int8_t yj, uint8_t n, hilbert_curve::callback_ptr func, void *data) {
@ -102,10 +102,8 @@ bool hilbert_curve::search_from(uint8_t x, uint8_t y, hilbert_curve::callback_pt
*/
bool hilbert_curve::search_from_closest(const xy_pos_t &pos, hilbert_curve::callback_ptr func, void *data) {
// Find closest grid intersection
uint8_t grid_x = LROUND(float(pos.x - MESH_MIN_X) / MESH_X_DIST);
uint8_t grid_y = LROUND(float(pos.y - MESH_MIN_Y) / MESH_Y_DIST);
LIMIT(grid_x, 0, GRID_MAX_POINTS_X);
LIMIT(grid_y, 0, GRID_MAX_POINTS_Y);
const uint8_t grid_x = LROUND(constrain(float(pos.x - (MESH_MIN_X)) / (MESH_X_DIST), 0, (GRID_MAX_POINTS_X) - 1));
const uint8_t grid_y = LROUND(constrain(float(pos.y - (MESH_MIN_Y)) / (MESH_Y_DIST), 0, (GRID_MAX_POINTS_Y) - 1));
return search_from(grid_x, grid_y, func, data);
}

8
Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.cpp
View File

@ -64,10 +64,10 @@
void mesh_bed_leveling::line_to_destination(const_feedRate_t scaled_fr_mm_s, uint8_t x_splits, uint8_t y_splits) {
// Get current and destination cells for this line
xy_int8_t scel = cell_indexes(current_position), ecel = cell_indexes(destination);
NOMORE(scel.x, GRID_MAX_POINTS_X - 2);
NOMORE(scel.y, GRID_MAX_POINTS_Y - 2);
NOMORE(ecel.x, GRID_MAX_POINTS_X - 2);
NOMORE(ecel.y, GRID_MAX_POINTS_Y - 2);
NOMORE(scel.x, GRID_MAX_CELLS_X - 1);
NOMORE(scel.y, GRID_MAX_CELLS_Y - 1);
NOMORE(ecel.x, GRID_MAX_CELLS_X - 1);
NOMORE(ecel.y, GRID_MAX_CELLS_Y - 1);
// Start and end in the same cell? No split needed.
if (scel == ecel) {

14
Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h
View File

@ -32,8 +32,8 @@ enum MeshLevelingState : char {
MeshReset // G29 S5
};
#define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1))
#define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1))
#define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / (GRID_MAX_CELLS_X))
#define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / (GRID_MAX_CELLS_Y))
#define _GET_MESH_X(I) mbl.index_to_xpos[I]
#define _GET_MESH_Y(J) mbl.index_to_ypos[J]
#define Z_VALUES_ARR mbl.z_values
@ -61,7 +61,7 @@ public:
static inline void zigzag(const int8_t index, int8_t &px, int8_t &py) {
px = index % (GRID_MAX_POINTS_X);
py = index / (GRID_MAX_POINTS_X);
if (py & 1) px = (GRID_MAX_POINTS_X - 1) - px; // Zig zag
if (py & 1) px = (GRID_MAX_POINTS_X) - 1 - px; // Zig zag
}
static void set_zigzag_z(const int8_t index, const_float_t z) {
@ -72,11 +72,11 @@ public:
static int8_t cell_index_x(const_float_t x) {
int8_t cx = (x - (MESH_MIN_X)) * RECIPROCAL(MESH_X_DIST);
return constrain(cx, 0, (GRID_MAX_POINTS_X) - 2);
return constrain(cx, 0, GRID_MAX_CELLS_X - 1);
}
static int8_t cell_index_y(const_float_t y) {
int8_t cy = (y - (MESH_MIN_Y)) * RECIPROCAL(MESH_Y_DIST);
return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 2);
return constrain(cy, 0, GRID_MAX_CELLS_Y - 1);
}
static inline xy_int8_t cell_indexes(const_float_t x, const_float_t y) {
return { cell_index_x(x), cell_index_y(y) };
@ -85,11 +85,11 @@ public:
static int8_t probe_index_x(const_float_t x) {
int8_t px = (x - (MESH_MIN_X) + 0.5f * (MESH_X_DIST)) * RECIPROCAL(MESH_X_DIST);
return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1;
return WITHIN(px, 0, (GRID_MAX_POINTS_X) - 1) ? px : -1;
}
static int8_t probe_index_y(const_float_t y) {
int8_t py = (y - (MESH_MIN_Y) + 0.5f * (MESH_Y_DIST)) * RECIPROCAL(MESH_Y_DIST);
return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1;
return WITHIN(py, 0, (GRID_MAX_POINTS_Y) - 1) ? py : -1;
}
static inline xy_int8_t probe_indexes(const_float_t x, const_float_t y) {
return { probe_index_x(x), probe_index_y(y) };

4
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View File

@ -190,7 +190,7 @@ void unified_bed_leveling::display_map(const int map_type) {
const xy_int8_t curr = closest_indexes(xy_pos_t(current_position) + probe.offset_xy);
if (!lcd) SERIAL_EOL();
for (int8_t j = GRID_MAX_POINTS_Y - 1; j >= 0; j--) {
for (int8_t j = (GRID_MAX_POINTS_Y) - 1; j >= 0; j--) {
// Row Label (J index)
if (human) {
@ -217,7 +217,7 @@ void unified_bed_leveling::display_map(const int map_type) {
if (human && f >= 0.0) SERIAL_CHAR(f > 0 ? '+' : ' '); // Display sign also for positive numbers (' ' for 0)
SERIAL_ECHO_F(f, 3); // Positive: 5 digits, Negative: 6 digits
}
if (csv && i < GRID_MAX_POINTS_X - 1) SERIAL_CHAR('\t');
if (csv && i < (GRID_MAX_POINTS_X) - 1) SERIAL_CHAR('\t');
// Closing Brace or Space
if (human) SERIAL_CHAR(is_current ? ']' : ' ');

46
Marlin/src/feature/bedlevel/ubl/ubl.h
View File

@ -38,8 +38,8 @@ enum MeshPointType : char { INVALID, REAL, SET_IN_BITMAP };
struct mesh_index_pair;
#define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1))
#define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1))
#define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / (GRID_MAX_CELLS_X))
#define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / (GRID_MAX_CELLS_Y))
#if ENABLED(OPTIMIZED_MESH_STORAGE)
typedef int16_t mesh_store_t[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
@ -142,19 +142,19 @@ public:
}
static int8_t cell_index_x_valid(const_float_t x) {
return WITHIN(cell_index_x_raw(x), 0, (GRID_MAX_POINTS_X - 2));
return WITHIN(cell_index_x_raw(x), 0, GRID_MAX_CELLS_X - 1);
}
static int8_t cell_index_y_valid(const_float_t y) {
return WITHIN(cell_index_y_raw(y), 0, (GRID_MAX_POINTS_Y - 2));
return WITHIN(cell_index_y_raw(y), 0, GRID_MAX_CELLS_Y - 1);
}
static int8_t cell_index_x(const_float_t x) {
return constrain(cell_index_x_raw(x), 0, (GRID_MAX_POINTS_X) - 2);
return constrain(cell_index_x_raw(x), 0, GRID_MAX_CELLS_X - 1);
}
static int8_t cell_index_y(const_float_t y) {
return constrain(cell_index_y_raw(y), 0, (GRID_MAX_POINTS_Y) - 2);
return constrain(cell_index_y_raw(y), 0, GRID_MAX_CELLS_Y - 1);
}
static inline xy_int8_t cell_indexes(const_float_t x, const_float_t y) {
@ -164,11 +164,11 @@ public:
static int8_t closest_x_index(const_float_t x) {
const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * RECIPROCAL(MESH_X_DIST);
return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1;
return WITHIN(px, 0, (GRID_MAX_POINTS_X) - 1) ? px : -1;
}
static int8_t closest_y_index(const_float_t y) {
const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * RECIPROCAL(MESH_Y_DIST);
return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1;
return WITHIN(py, 0, (GRID_MAX_POINTS_Y) - 1) ? py : -1;
}
static inline xy_int8_t closest_indexes(const xy_pos_t &xy) {
return { closest_x_index(xy.x), closest_y_index(xy.y) };
@ -204,10 +204,10 @@ public:
* the case where the printer is making a vertical line that only crosses horizontal mesh lines.
*/
static inline float z_correction_for_x_on_horizontal_mesh_line(const_float_t rx0, const int x1_i, const int yi) {
if (!WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(yi, 0, GRID_MAX_POINTS_Y - 1)) {
if (!WITHIN(x1_i, 0, (GRID_MAX_POINTS_X) - 1) || !WITHIN(yi, 0, (GRID_MAX_POINTS_Y) - 1)) {
if (DEBUGGING(LEVELING)) {
if (WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1)) DEBUG_ECHOPGM("yi"); else DEBUG_ECHOPGM("x1_i");
if (WITHIN(x1_i, 0, (GRID_MAX_POINTS_X) - 1)) DEBUG_ECHOPGM("yi"); else DEBUG_ECHOPGM("x1_i");
DEBUG_ECHOLNPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0, ",x1_i=", x1_i, ",yi=", yi, ")");
}
@ -218,19 +218,19 @@ public:
const float xratio = (rx0 - mesh_index_to_xpos(x1_i)) * RECIPROCAL(MESH_X_DIST),
z1 = z_values[x1_i][yi];
return z1 + xratio * (z_values[_MIN(x1_i, GRID_MAX_POINTS_X - 2) + 1][yi] - z1); // Don't allow x1_i+1 to be past the end of the array
// If it is, it is clamped to the last element of the
// z_values[][] array and no correction is applied.
return z1 + xratio * (z_values[_MIN(x1_i, (GRID_MAX_POINTS_X) - 2) + 1][yi] - z1); // Don't allow x1_i+1 to be past the end of the array
// If it is, it is clamped to the last element of the
// z_values[][] array and no correction is applied.
}
//
// See comments above for z_correction_for_x_on_horizontal_mesh_line
//
static inline float z_correction_for_y_on_vertical_mesh_line(const_float_t ry0, const int xi, const int y1_i) {
if (!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(y1_i, 0, GRID_MAX_POINTS_Y - 1)) {
if (!WITHIN(xi, 0, (GRID_MAX_POINTS_X) - 1) || !WITHIN(y1_i, 0, (GRID_MAX_POINTS_Y) - 1)) {
if (DEBUGGING(LEVELING)) {
if (WITHIN(xi, 0, GRID_MAX_POINTS_X - 1)) DEBUG_ECHOPGM("y1_i"); else DEBUG_ECHOPGM("xi");
if (WITHIN(xi, 0, (GRID_MAX_POINTS_X) - 1)) DEBUG_ECHOPGM("y1_i"); else DEBUG_ECHOPGM("xi");
DEBUG_ECHOLNPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0, ", xi=", xi, ", y1_i=", y1_i, ")");
}
@ -241,9 +241,9 @@ public:
const float yratio = (ry0 - mesh_index_to_ypos(y1_i)) * RECIPROCAL(MESH_Y_DIST),
z1 = z_values[xi][y1_i];
return z1 + yratio * (z_values[xi][_MIN(y1_i, GRID_MAX_POINTS_Y - 2) + 1] - z1); // Don't allow y1_i+1 to be past the end of the array
// If it is, it is clamped to the last element of the
// z_values[][] array and no correction is applied.
return z1 + yratio * (z_values[xi][_MIN(y1_i, (GRID_MAX_POINTS_Y) - 2) + 1] - z1); // Don't allow y1_i+1 to be past the end of the array
// If it is, it is clamped to the last element of the
// z_values[][] array and no correction is applied.
}
/**
@ -266,11 +266,11 @@ public:
const float z1 = calc_z0(rx0,
mesh_index_to_xpos(cx), z_values[cx][cy],
mesh_index_to_xpos(cx + 1), z_values[_MIN(cx, GRID_MAX_POINTS_X - 2) + 1][cy]);
mesh_index_to_xpos(cx + 1), z_values[_MIN(cx, (GRID_MAX_POINTS_X) - 2) + 1][cy]);
const float z2 = calc_z0(rx0,
mesh_index_to_xpos(cx), z_values[cx][_MIN(cy, GRID_MAX_POINTS_Y - 2) + 1],
mesh_index_to_xpos(cx + 1), z_values[_MIN(cx, GRID_MAX_POINTS_X - 2) + 1][_MIN(cy, GRID_MAX_POINTS_Y - 2) + 1]);
mesh_index_to_xpos(cx), z_values[cx][_MIN(cy, (GRID_MAX_POINTS_Y) - 2) + 1],
mesh_index_to_xpos(cx + 1), z_values[_MIN(cx, (GRID_MAX_POINTS_X) - 2) + 1][_MIN(cy, (GRID_MAX_POINTS_Y) - 2) + 1]);
float z0 = calc_z0(ry0,
mesh_index_to_ypos(cy), z1,
@ -302,10 +302,10 @@ public:
static inline float get_z_correction(const xy_pos_t &pos) { return get_z_correction(pos.x, pos.y); }
static inline float mesh_index_to_xpos(const uint8_t i) {
return i < GRID_MAX_POINTS_X ? pgm_read_float(&_mesh_index_to_xpos[i]) : MESH_MIN_X + i * (MESH_X_DIST);
return i < (GRID_MAX_POINTS_X) ? pgm_read_float(&_mesh_index_to_xpos[i]) : MESH_MIN_X + i * (MESH_X_DIST);
}
static inline float mesh_index_to_ypos(const uint8_t i) {
return i < GRID_MAX_POINTS_Y ? pgm_read_float(&_mesh_index_to_ypos[i]) : MESH_MIN_Y + i * (MESH_Y_DIST);
return i < (GRID_MAX_POINTS_Y) ? pgm_read_float(&_mesh_index_to_ypos[i]) : MESH_MIN_Y + i * (MESH_Y_DIST);
}
#if UBL_SEGMENTED

8
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -433,8 +433,7 @@ void unified_bed_leveling::G29() {
SERIAL_DECIMAL(param.XY_pos.y);
SERIAL_ECHOLNPGM(").\n");
}
const xy_pos_t near_probe_xy = param.XY_pos + probe.offset_xy;
probe_entire_mesh(near_probe_xy, parser.seen('T'), parser.seen('E'), parser.seen('U'));
probe_entire_mesh(param.XY_pos, parser.seen('T'), parser.seen('E'), parser.seen('U'));
report_current_position();
probe_deployed = true;
@ -1140,8 +1139,9 @@ bool unified_bed_leveling::G29_parse_parameters() {
}
// If X or Y are not valid, use center of the bed values
if (!COORDINATE_OKAY(sx, X_MIN_BED, X_MAX_BED)) sx = X_CENTER;
if (!COORDINATE_OKAY(sy, Y_MIN_BED, Y_MAX_BED)) sy = Y_CENTER;
// (for UBL_HILBERT_CURVE default to lower-left corner instead)
if (!COORDINATE_OKAY(sx, X_MIN_BED, X_MAX_BED)) sx = TERN(UBL_HILBERT_CURVE, 0, X_CENTER);
if (!COORDINATE_OKAY(sy, Y_MIN_BED, Y_MAX_BED)) sy = TERN(UBL_HILBERT_CURVE, 0, Y_CENTER);
if (err_flag) return UBL_ERR;

4
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
View File

@ -397,8 +397,8 @@
int8_t((raw.x - (MESH_MIN_X)) * RECIPROCAL(MESH_X_DIST)),
int8_t((raw.y - (MESH_MIN_Y)) * RECIPROCAL(MESH_Y_DIST))
};
LIMIT(icell.x, 0, (GRID_MAX_POINTS_X) - 1);
LIMIT(icell.y, 0, (GRID_MAX_POINTS_Y) - 1);
LIMIT(icell.x, 0, GRID_MAX_CELLS_X);
LIMIT(icell.y, 0, GRID_MAX_CELLS_Y);
float z_x0y0 = z_values[icell.x ][icell.y ], // z at lower left corner
z_x1y0 = z_values[icell.x+1][icell.y ], // z at upper left corner

667
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -113,6 +113,10 @@
#include "../../module/temperature.h"
#include "../../lcd/marlinui.h"
#if ENABLED(UBL_HILBERT_CURVE)
#include "../../feature/bedlevel/hilbert_curve.h"
#endif
#define EXTRUSION_MULTIPLIER 1.0
#define PRIME_LENGTH 10.0
#define OOZE_AMOUNT 0.3
@ -145,24 +149,9 @@
constexpr float g26_e_axis_feedrate = 0.025;
static MeshFlags circle_flags, horizontal_mesh_line_flags, vertical_mesh_line_flags;
static MeshFlags circle_flags;
float g26_random_deviation = 0.0;
static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched
// retracts/recovers won't result in a bad state.
float g26_extrusion_multiplier,
g26_retraction_multiplier,
g26_layer_height,
g26_prime_length;
xy_pos_t g26_xy_pos; // = { 0, 0 }
int16_t g26_bed_temp,
g26_hotend_temp;
int8_t g26_prime_flag;
#if HAS_LCD_MENU
/**
@ -178,52 +167,17 @@ int8_t g26_prime_flag;
#endif
mesh_index_pair find_closest_circle_to_print(const xy_pos_t &pos) {
float closest = 99999.99;
mesh_index_pair out_point;
out_point.pos = -1;
GRID_LOOP(i, j) {
if (!circle_flags.marked(i, j)) {
// We found a circle that needs to be printed
const xy_pos_t m = { _GET_MESH_X(i), _GET_MESH_Y(j) };
// Get the distance to this intersection
float f = (pos - m).magnitude();
// It is possible that we are being called with the values
// to let us find the closest circle to the start position.
// But if this is not the case, add a small weighting to the
// distance calculation to help it choose a better place to continue.
f += (g26_xy_pos - m).magnitude() / 15.0f;
// Add the specified amount of Random Noise to our search
if (g26_random_deviation > 1.0) f += random(0.0, g26_random_deviation);
if (f < closest) {
closest = f; // Found a closer un-printed location
out_point.pos.set(i, j); // Save its data
out_point.distance = closest;
}
}
}
circle_flags.mark(out_point); // Mark this location as done.
return out_point;
}
void move_to(const_float_t rx, const_float_t ry, const_float_t z, const_float_t e_delta) {
static float last_z = -999.99;
const xy_pos_t dest = { rx, ry };
const bool has_xy_component = dest != current_position; // Check if X or Y is involved in the movement.
const bool has_e_component = e_delta != 0.0;
destination = current_position;
const bool has_xy_component = dest != current_position, // Check if X or Y is involved in the movement.
has_e_component = e_delta != 0.0;
if (z != last_z) {
last_z = destination.z = z;
last_z = z;
destination.set(current_position.x, current_position.y, z, current_position.e);
const feedRate_t fr_mm_s = planner.settings.max_feedrate_mm_s[Z_AXIS] * 0.5f; // Use half of the Z_AXIS max feed rate
prepare_internal_move_to_destination(fr_mm_s);
}
@ -239,241 +193,293 @@ void move_to(const_float_t rx, const_float_t ry, const_float_t z, const_float_t
prepare_internal_move_to_destination(fr_mm_s);
}
FORCE_INLINE void move_to(const xyz_pos_t &where, const_float_t de) { move_to(where.x, where.y, where.z, de); }
void move_to(const xyz_pos_t &where, const_float_t de) { move_to(where.x, where.y, where.z, de); }
void retract_filament(const xyz_pos_t &where) {
if (!g26_retracted) { // Only retract if we are not already retracted!
g26_retracted = true;
move_to(where, -1.0f * g26_retraction_multiplier);
}
}
typedef struct {
float extrusion_multiplier = EXTRUSION_MULTIPLIER,
retraction_multiplier = G26_RETRACT_MULTIPLIER,
layer_height = MESH_TEST_LAYER_HEIGHT,
prime_length = PRIME_LENGTH;
// TODO: Parameterize the Z lift with a define
void retract_lift_move(const xyz_pos_t &s) {
retract_filament(destination);
move_to(current_position.x, current_position.y, current_position.z + 0.5f, 0.0); // Z lift to minimize scraping
move_to(s.x, s.y, s.z + 0.5f, 0.0); // Get to the starting point with no extrusion while lifted
}
int16_t bed_temp = MESH_TEST_BED_TEMP,
hotend_temp = MESH_TEST_HOTEND_TEMP;
void recover_filament(const xyz_pos_t &where) {
if (g26_retracted) { // Only un-retract if we are retracted.
move_to(where, 1.2f * g26_retraction_multiplier);
g26_retracted = false;
}
}
float nozzle = MESH_TEST_NOZZLE_SIZE,
filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA,
ooze_amount; // 'O' ... OOZE_AMOUNT
/**
* print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one
* to the other. But there are really three sets of coordinates involved. The first coordinate
* is the present location of the nozzle. We don't necessarily want to print from this location.
* We first need to move the nozzle to the start of line segment where we want to print. Once
* there, we can use the two coordinates supplied to draw the line.
*
* Note: Although we assume the first set of coordinates is the start of the line and the second
* set of coordinates is the end of the line, it does not always work out that way. This function
* optimizes the movement to minimize the travel distance before it can start printing. This saves
* a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does
* cause a lot of very little short retracement of th nozzle when it draws the very first line
* segment of a 'circle'. The time this requires is very short and is easily saved by the other
* cases where the optimization comes into play.
*/
void print_line_from_here_to_there(const xyz_pos_t &s, const xyz_pos_t &e) {
bool continue_with_closest, // 'C'
keep_heaters_on; // 'K'
// Distances to the start / end of the line
xy_float_t svec = current_position - s, evec = current_position - e;
xy_pos_t xy_pos; // = { 0, 0 }
const float dist_start = HYPOT2(svec.x, svec.y),
dist_end = HYPOT2(evec.x, evec.y),
line_length = HYPOT(e.x - s.x, e.y - s.y);
int8_t prime_flag = 0;
// If the end point of the line is closer to the nozzle, flip the direction,
// moving from the end to the start. On very small lines the optimization isn't worth it.
if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length))
return print_line_from_here_to_there(e, s);
bool g26_retracted = false; // Track the retracted state during G26 so mismatched
// retracts/recovers don't result in a bad state.
// Decide whether to retract & lift
if (dist_start > 2.0) retract_lift_move(s);
move_to(s, 0.0); // Get to the starting point with no extrusion / un-Z lift
const float e_pos_delta = line_length * g26_e_axis_feedrate * g26_extrusion_multiplier;
recover_filament(destination);
move_to(e, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion
}
inline bool look_for_lines_to_connect() {
xyz_pos_t s, e;
s.z = e.z = g26_layer_height;
GRID_LOOP(i, j) {
if (TERN0(HAS_LCD_MENU, user_canceled())) return true;
if (i < (GRID_MAX_POINTS_X)) { // Can't connect to anything farther to the right than GRID_MAX_POINTS_X.
// Already a half circle at the edge of the bed.
if (circle_flags.marked(i, j) && circle_flags.marked(i + 1, j)) { // Test whether a leftward line can be done
if (!horizontal_mesh_line_flags.marked(i, j)) {
// Two circles need a horizontal line to connect them
s.x = _GET_MESH_X( i ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge
e.x = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge
#if HAS_ENDSTOPS
LIMIT(s.x, X_MIN_POS + 1, X_MAX_POS - 1);
s.y = e.y = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
LIMIT(e.x, X_MIN_POS + 1, X_MAX_POS - 1);
#else
s.y = e.y = _GET_MESH_Y(j);
#endif
if (position_is_reachable(s.x, s.y) && position_is_reachable(e.x, e.y))
print_line_from_here_to_there(s, e);
horizontal_mesh_line_flags.mark(i, j); // Mark done, even if skipped
}
}
if (j < (GRID_MAX_POINTS_Y)) { // Can't connect to anything further back than GRID_MAX_POINTS_Y.
// Already a half circle at the edge of the bed.
if (circle_flags.marked(i, j) && circle_flags.marked(i, j + 1)) { // Test whether a downward line can be done
if (!vertical_mesh_line_flags.marked(i, j)) {
// Two circles that need a vertical line to connect them
s.y = _GET_MESH_Y( j ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge
e.y = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge
#if HAS_ENDSTOPS
s.x = e.x = constrain(_GET_MESH_X(i), X_MIN_POS + 1, X_MAX_POS - 1);
LIMIT(s.y, Y_MIN_POS + 1, Y_MAX_POS - 1);
LIMIT(e.y, Y_MIN_POS + 1, Y_MAX_POS - 1);
#else
s.x = e.x = _GET_MESH_X(i);
#endif
if (position_is_reachable(s.x, s.y) && position_is_reachable(e.x, e.y))
print_line_from_here_to_there(s, e);
vertical_mesh_line_flags.mark(i, j); // Mark done, even if skipped
}
}
}
void retract_filament(const xyz_pos_t &where) {
if (!g26_retracted) { // Only retract if we are not already retracted!
g26_retracted = true;
move_to(where, -1.0f * retraction_multiplier);
}
}
return false;
}
/**
* Turn on the bed and nozzle heat and
* wait for them to get up to temperature.
*/
inline bool turn_on_heaters() {
SERIAL_ECHOLNPGM("Waiting for heatup.");
#if HAS_HEATED_BED
if (g26_bed_temp > 25) {
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99);
ui.quick_feedback();
TERN_(HAS_LCD_MENU, ui.capture());
#endif
thermalManager.setTargetBed(g26_bed_temp);
// Wait for the temperature to stabilize
if (!thermalManager.wait_for_bed(true
#if G26_CLICK_CAN_CANCEL
, true
#endif
)
) return G26_ERR;
}
#endif // HAS_HEATED_BED
// Start heating the active nozzle
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99);
ui.quick_feedback();
#endif
thermalManager.setTargetHotend(g26_hotend_temp, active_extruder);
// Wait for the temperature to stabilize
if (!thermalManager.wait_for_hotend(active_extruder, true
#if G26_CLICK_CAN_CANCEL
, true
#endif
)) return G26_ERR;
#if HAS_WIRED_LCD
ui.reset_status();
ui.quick_feedback();
#endif
return G26_OK;
}
/**
* Prime the nozzle if needed. Return true on error.
*/
inline bool prime_nozzle() {
const feedRate_t fr_slow_e = planner.settings.max_feedrate_mm_s[E_AXIS] / 15.0f;
#if HAS_LCD_MENU && !HAS_TOUCH_BUTTONS // ui.button_pressed issue with touchscreen
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
float Total_Prime = 0.0;
#endif
if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged
ui.capture();
ui.set_status_P(GET_TEXT(MSG_G26_MANUAL_PRIME), 99);
ui.chirp();
destination = current_position;
recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
while (!ui.button_pressed()) {
ui.chirp();
destination.e += 0.25;
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
Total_Prime += 0.25;
if (Total_Prime >= EXTRUDE_MAXLENGTH) {
ui.release();
return G26_ERR;
}
#endif
prepare_internal_move_to_destination(fr_slow_e);
destination = current_position;
planner.synchronize(); // Without this synchronize, the purge is more consistent,
// but because the planner has a buffer, we won't be able
// to stop as quickly. So we put up with the less smooth
// action to give the user a more responsive 'Stop'.
}
ui.wait_for_release();
ui.set_status_P(GET_TEXT(MSG_G26_PRIME_DONE), 99);
ui.quick_feedback();
ui.release();
}
else
#endif
{
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99);
ui.quick_feedback();
#endif
destination = current_position;
destination.e += g26_prime_length;
prepare_internal_move_to_destination(fr_slow_e);
destination.e -= g26_prime_length;
// TODO: Parameterize the Z lift with a define
void retract_lift_move(const xyz_pos_t &s) {
retract_filament(destination);
move_to(current_position.x, current_position.y, current_position.z + 0.5f, 0.0f); // Z lift to minimize scraping
move_to(s.x, s.y, s.z + 0.5f, 0.0f); // Get to the starting point with no extrusion while lifted
}
return G26_OK;
}
void recover_filament(const xyz_pos_t &where) {
if (g26_retracted) { // Only un-retract if we are retracted.
move_to(where, 1.2f * retraction_multiplier);
g26_retracted = false;
}
}
/**
* print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one
* to the other. But there are really three sets of coordinates involved. The first coordinate
* is the present location of the nozzle. We don't necessarily want to print from this location.
* We first need to move the nozzle to the start of line segment where we want to print. Once
* there, we can use the two coordinates supplied to draw the line.
*
* Note: Although we assume the first set of coordinates is the start of the line and the second
* set of coordinates is the end of the line, it does not always work out that way. This function
* optimizes the movement to minimize the travel distance before it can start printing. This saves
* a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does
* cause a lot of very little short retracement of th nozzle when it draws the very first line
* segment of a 'circle'. The time this requires is very short and is easily saved by the other
* cases where the optimization comes into play.
*/
void print_line_from_here_to_there(const xyz_pos_t &s, const xyz_pos_t &e) {
// Distances to the start / end of the line
xy_float_t svec = current_position - s, evec = current_position - e;
const float dist_start = HYPOT2(svec.x, svec.y),
dist_end = HYPOT2(evec.x, evec.y),
line_length = HYPOT(e.x - s.x, e.y - s.y);
// If the end point of the line is closer to the nozzle, flip the direction,
// moving from the end to the start. On very small lines the optimization isn't worth it.
if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length))
return print_line_from_here_to_there(e, s);
// Decide whether to retract & lift
if (dist_start > 2.0) retract_lift_move(s);
move_to(s, 0.0); // Get to the starting point with no extrusion / un-Z lift
const float e_pos_delta = line_length * g26_e_axis_feedrate * extrusion_multiplier;
recover_filament(destination);
move_to(e, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion
}
void connect_neighbor_with_line(const xy_int8_t &p1, int8_t dx, int8_t dy) {
xy_int8_t p2;
p2.x = p1.x + dx;
p2.y = p1.y + dy;
if (p2.x < 0 || p2.x >= (GRID_MAX_POINTS_X)) return;
if (p2.y < 0 || p2.y >= (GRID_MAX_POINTS_Y)) return;
if(circle_flags.marked(p1.x, p1.y) && circle_flags.marked(p2.x, p2.y)) {
xyz_pos_t s, e;
s.x = _GET_MESH_X(p1.x) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dx;
e.x = _GET_MESH_X(p2.x) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dx;
s.y = _GET_MESH_Y(p1.y) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dy;
e.y = _GET_MESH_Y(p2.y) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)) * dy;
s.z = e.z = layer_height;
#if HAS_ENDSTOPS
LIMIT(s.y, Y_MIN_POS + 1, Y_MAX_POS - 1);
LIMIT(e.y, Y_MIN_POS + 1, Y_MAX_POS - 1);
LIMIT(s.x, X_MIN_POS + 1, X_MAX_POS - 1);
LIMIT(e.x, X_MIN_POS + 1, X_MAX_POS - 1);
#endif
if (position_is_reachable(s.x, s.y) && position_is_reachable(e.x, e.y))
print_line_from_here_to_there(s, e);
}
}
/**
* Turn on the bed and nozzle heat and
* wait for them to get up to temperature.
*/
bool turn_on_heaters() {
SERIAL_ECHOLNPGM("Waiting for heatup.");
#if HAS_HEATED_BED
if (bed_temp > 25) {
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99);
ui.quick_feedback();
TERN_(HAS_LCD_MENU, ui.capture());
#endif
thermalManager.setTargetBed(bed_temp);
// Wait for the temperature to stabilize
if (!thermalManager.wait_for_bed(true
#if G26_CLICK_CAN_CANCEL
, true
#endif
)
) return G26_ERR;
}
#else
UNUSED(bed_temp);
#endif // HAS_HEATED_BED
// Start heating the active nozzle
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99);
ui.quick_feedback();
#endif
thermalManager.setTargetHotend(hotend_temp, active_extruder);
// Wait for the temperature to stabilize
if (!thermalManager.wait_for_hotend(active_extruder, true
#if G26_CLICK_CAN_CANCEL
, true
#endif
)) return G26_ERR;
#if HAS_WIRED_LCD
ui.reset_status();
ui.quick_feedback();
#endif
return G26_OK;
}
/**
* Prime the nozzle if needed. Return true on error.
*/
bool prime_nozzle() {
const feedRate_t fr_slow_e = planner.settings.max_feedrate_mm_s[E_AXIS] / 15.0f;
#if HAS_LCD_MENU && !HAS_TOUCH_BUTTONS // ui.button_pressed issue with touchscreen
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
float Total_Prime = 0.0;
#endif
if (prime_flag == -1) { // The user wants to control how much filament gets purged
ui.capture();
ui.set_status_P(GET_TEXT(MSG_G26_MANUAL_PRIME), 99);
ui.chirp();
destination = current_position;
recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
while (!ui.button_pressed()) {
ui.chirp();
destination.e += 0.25;
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
Total_Prime += 0.25;
if (Total_Prime >= EXTRUDE_MAXLENGTH) {
ui.release();
return G26_ERR;
}
#endif
prepare_internal_move_to_destination(fr_slow_e);
destination = current_position;
planner.synchronize(); // Without this synchronize, the purge is more consistent,
// but because the planner has a buffer, we won't be able
// to stop as quickly. So we put up with the less smooth
// action to give the user a more responsive 'Stop'.
}
ui.wait_for_release();
ui.set_status_P(GET_TEXT(MSG_G26_PRIME_DONE), 99);
ui.quick_feedback();
ui.release();
}
else
#endif
{
#if HAS_WIRED_LCD
ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99);
ui.quick_feedback();
#endif
destination = current_position;
destination.e += prime_length;
prepare_internal_move_to_destination(fr_slow_e);
destination.e -= prime_length;
retract_filament(destination);
}
return G26_OK;
}
/**
* Find the nearest point at which to print a circle
*/
mesh_index_pair find_closest_circle_to_print(const xy_pos_t &pos) {
mesh_index_pair out_point;
out_point.pos = -1;
#if ENABLED(UBL_HILBERT_CURVE)
auto test_func = [](uint8_t i, uint8_t j, void *data) -> bool {
if (!circle_flags.marked(i, j)) {
mesh_index_pair *out_point = (mesh_index_pair*)data;
out_point->pos.set(i, j); // Save its data
return true;
}
return false;
};
hilbert_curve::search_from_closest(pos, test_func, &out_point);
#else
float closest = 99999.99;
GRID_LOOP(i, j) {
if (!circle_flags.marked(i, j)) {
// We found a circle that needs to be printed
const xy_pos_t m = { _GET_MESH_X(i), _GET_MESH_Y(j) };
// Get the distance to this intersection
float f = (pos - m).magnitude();
// It is possible that we are being called with the values
// to let us find the closest circle to the start position.
// But if this is not the case, add a small weighting to the
// distance calculation to help it choose a better place to continue.
f += (xy_pos - m).magnitude() / 15.0f;
// Add the specified amount of Random Noise to our search
if (g26_random_deviation > 1.0) f += random(0.0, g26_random_deviation);
if (f < closest) {
closest = f; // Found a closer un-printed location
out_point.pos.set(i, j); // Save its data
out_point.distance = closest;
}
}
}
#endif
circle_flags.mark(out_point); // Mark this location as done.
return out_point;
}
} g26_helper_t;
/**
* G26: Mesh Validation Pattern generation.
@ -510,20 +516,11 @@ void GcodeSuite::G26() {
// Change the tool first, if specified
if (parser.seenval('T')) tool_change(parser.value_int());
g26_extrusion_multiplier = EXTRUSION_MULTIPLIER;
g26_retraction_multiplier = G26_RETRACT_MULTIPLIER;
g26_layer_height = MESH_TEST_LAYER_HEIGHT;
g26_prime_length = PRIME_LENGTH;
g26_bed_temp = MESH_TEST_BED_TEMP;
g26_hotend_temp = MESH_TEST_HOTEND_TEMP;
g26_prime_flag = 0;
g26_helper_t g26;
float g26_nozzle = MESH_TEST_NOZZLE_SIZE,
g26_filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA,
g26_ooze_amount = parser.linearval('O', OOZE_AMOUNT);
bool g26_continue_with_closest = parser.boolval('C'),
g26_keep_heaters_on = parser.boolval('K');
g26.ooze_amount = parser.linearval('O', OOZE_AMOUNT);
g26.continue_with_closest = parser.boolval('C');
g26.keep_heaters_on = parser.boolval('K');
// Accept 'I' if temperature presets are defined
#if PREHEAT_COUNT
@ -548,14 +545,14 @@ void GcodeSuite::G26() {
SERIAL_ECHOLNPAIR("?Specified bed temperature not plausible (40-", BED_MAX_TARGET, "C).");
return;
}
g26_bed_temp = bedtemp;
g26.bed_temp = bedtemp;
}
#endif // HAS_HEATED_BED
if (parser.seenval('L')) {
g26_layer_height = parser.value_linear_units();
if (!WITHIN(g26_layer_height, 0.0, 2.0)) {
g26.layer_height = parser.value_linear_units();
if (!WITHIN(g26.layer_height, 0.0, 2.0)) {
SERIAL_ECHOLNPGM("?Specified layer height not plausible.");
return;
}
@ -563,8 +560,8 @@ void GcodeSuite::G26() {
if (parser.seen('Q')) {
if (parser.has_value()) {
g26_retraction_multiplier = parser.value_float();
if (!WITHIN(g26_retraction_multiplier, 0.05, 15.0)) {
g26.retraction_multiplier = parser.value_float();
if (!WITHIN(g26.retraction_multiplier, 0.05, 15.0)) {
SERIAL_ECHOLNPGM("?Specified Retraction Multiplier not plausible.");
return;
}
@ -576,8 +573,8 @@ void GcodeSuite::G26() {
}
if (parser.seenval('S')) {
g26_nozzle = parser.value_float();
if (!WITHIN(g26_nozzle, 0.1, 2.0)) {
g26.nozzle = parser.value_float();
if (!WITHIN(g26.nozzle, 0.1, 2.0)) {
SERIAL_ECHOLNPGM("?Specified nozzle size not plausible.");
return;
}
@ -586,16 +583,16 @@ void GcodeSuite::G26() {
if (parser.seen('P')) {
if (!parser.has_value()) {
#if HAS_LCD_MENU
g26_prime_flag = -1;
g26.prime_flag = -1;
#else
SERIAL_ECHOLNPGM("?Prime length must be specified when not using an LCD.");
return;
#endif
}
else {
g26_prime_flag++;
g26_prime_length = parser.value_linear_units();
if (!WITHIN(g26_prime_length, 0.0, 25.0)) {
g26.prime_flag++;
g26.prime_length = parser.value_linear_units();
if (!WITHIN(g26.prime_length, 0.0, 25.0)) {
SERIAL_ECHOLNPGM("?Specified prime length not plausible.");
return;
}
@ -603,17 +600,17 @@ void GcodeSuite::G26() {
}
if (parser.seenval('F')) {
g26_filament_diameter = parser.value_linear_units();
if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) {
g26.filament_diameter = parser.value_linear_units();
if (!WITHIN(g26.filament_diameter, 1.0, 4.0)) {
SERIAL_ECHOLNPGM("?Specified filament size not plausible.");
return;
}
}
g26_extrusion_multiplier *= sq(1.75) / sq(g26_filament_diameter); // If we aren't using 1.75mm filament, we need to
g26.extrusion_multiplier *= sq(1.75) / sq(g26.filament_diameter); // If we aren't using 1.75mm filament, we need to
// scale up or down the length needed to get the
// same volume of filament
g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
g26.extrusion_multiplier *= g26.filament_diameter * sq(g26.nozzle) / sq(0.3); // Scale up by nozzle size
// Get a temperature from 'I' or 'H'
celsius_t noztemp = 0;
@ -632,7 +629,7 @@ void GcodeSuite::G26() {
SERIAL_ECHOLNPGM("?Specified nozzle temperature not plausible.");
return;
}
g26_hotend_temp = noztemp;
g26.hotend_temp = noztemp;
}
// 'U' to Randomize and optionally set circle deviation
@ -660,9 +657,9 @@ void GcodeSuite::G26() {
}
// Set a position with 'X' and/or 'Y'. Default: current_position
g26_xy_pos.set(parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position.x,
g26.xy_pos.set(parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position.x,
parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position.y);
if (!position_is_reachable(g26_xy_pos)) {
if (!position_is_reachable(g26.xy_pos)) {
SERIAL_ECHOLNPGM("?Specified X,Y coordinate out of bounds.");
return;
}
@ -680,12 +677,12 @@ void GcodeSuite::G26() {
planner.calculate_volumetric_multipliers();
#endif
if (turn_on_heaters() != G26_OK) goto LEAVE;
if (g26.turn_on_heaters() != G26_OK) goto LEAVE;
current_position.e = 0.0;
sync_plan_position_e();
if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE;
if (g26.prime_flag && g26.prime_nozzle() != G26_OK) goto LEAVE;
/**
* Bed is preheated
@ -698,14 +695,12 @@ void GcodeSuite::G26() {
*/
circle_flags.reset();
horizontal_mesh_line_flags.reset();
vertical_mesh_line_flags.reset();
// Move nozzle to the specified height for the first layer
destination = current_position;
destination.z = g26_layer_height;
destination.z = g26.layer_height;
move_to(destination, 0.0);
move_to(destination, g26_ooze_amount);
move_to(destination, g26.ooze_amount);
TERN_(HAS_LCD_MENU, ui.capture());
@ -732,7 +727,7 @@ void GcodeSuite::G26() {
mesh_index_pair location;
do {
// Find the nearest confluence
location = find_closest_circle_to_print(g26_continue_with_closest ? xy_pos_t(current_position) : g26_xy_pos);
location = g26.find_closest_circle_to_print(g26.continue_with_closest ? xy_pos_t(current_position) : g26.xy_pos);
if (location.valid()) {
const xy_pos_t circle = _GET_MESH_POS(location.pos);
@ -762,7 +757,7 @@ void GcodeSuite::G26() {
if (!b) { e.x = circle.x; e.y += INTERSECTION_CIRCLE_RADIUS; }
arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2);
}
else if (r) { // right edge
else if (r) { // right edge
if (b) s.set(circle.x - (INTERSECTION_CIRCLE_RADIUS), circle.y);
else s.set(circle.x, circle.y + INTERSECTION_CIRCLE_RADIUS);
if (f) e.set(circle.x - (INTERSECTION_CIRCLE_RADIUS), circle.y);
@ -782,25 +777,24 @@ void GcodeSuite::G26() {
const xy_float_t dist = current_position - s; // Distance from the start of the actual circle
const float dist_start = HYPOT2(dist.x, dist.y);
const xyze_pos_t endpoint = {
e.x, e.y, g26_layer_height,
current_position.e + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier)
e.x, e.y, g26.layer_height,
current_position.e + (arc_length * g26_e_axis_feedrate * g26.extrusion_multiplier)
};
if (dist_start > 2.0) {
s.z = g26_layer_height + 0.5f;
retract_lift_move(s);
s.z = g26.layer_height + 0.5f;
g26.retract_lift_move(s);
}
s.z = g26_layer_height;
s.z = g26.layer_height;
move_to(s, 0.0); // Get to the starting point with no extrusion / un-Z lift
recover_filament(destination);
g26.recover_filament(destination);
const feedRate_t old_feedrate = feedrate_mm_s;
feedrate_mm_s = PLANNER_XY_FEEDRATE() * 0.1f;
plan_arc(endpoint, arc_offset, false, 0); // Draw a counter-clockwise arc
feedrate_mm_s = old_feedrate;
destination = current_position;
{ REMEMBER(fr, feedrate_mm_s, PLANNER_XY_FEEDRATE() * 0.1f);
plan_arc(endpoint, arc_offset, false, 0); // Draw a counter-clockwise arc
destination = current_position;
}
if (TERN0(HAS_LCD_MENU, user_canceled())) goto LEAVE; // Check if the user wants to stop the Mesh Validation
@ -828,8 +822,8 @@ void GcodeSuite::G26() {
if (TERN0(HAS_LCD_MENU, user_canceled())) goto LEAVE; // Check if the user wants to stop the Mesh Validation
xyz_float_t p = { circle.x + _COS(ind ), circle.y + _SIN(ind ), g26_layer_height },
q = { circle.x + _COS(ind + 1), circle.y + _SIN(ind + 1), g26_layer_height };
xyz_float_t p = { circle.x + _COS(ind ), circle.y + _SIN(ind ), g26.layer_height },
q = { circle.x + _COS(ind + 1), circle.y + _SIN(ind + 1), g26.layer_height };
#if IS_KINEMATIC
// Check to make sure this segment is entirely on the bed, skip if not.
@ -841,13 +835,17 @@ void GcodeSuite::G26() {
LIMIT(q.y, Y_MIN_POS + 1, Y_MAX_POS - 1);
#endif
print_line_from_here_to_there(p, q);
g26.print_line_from_here_to_there(p, q);
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
}
#endif // !ARC_SUPPORT
if (look_for_lines_to_connect()) goto LEAVE;
g26.connect_neighbor_with_line(location.pos, -1, 0);
g26.connect_neighbor_with_line(location.pos, 1, 0);
g26.connect_neighbor_with_line(location.pos, 0, -1);
g26.connect_neighbor_with_line(location.pos, 0, 1);
if (TERN0(HAS_LCD_MENU, user_canceled())) goto LEAVE;
}
SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
@ -857,12 +855,9 @@ void GcodeSuite::G26() {
LEAVE:
ui.set_status_P(GET_TEXT(MSG_G26_LEAVING), -1);
retract_filament(destination);
g26.retract_filament(destination);
destination.z = Z_CLEARANCE_BETWEEN_PROBES;
move_to(destination, 0); // Raise the nozzle
destination = g26_xy_pos; // Move back to the starting XY position
move_to(destination, 0); // Move back to the starting position
move_to(destination, 0); // Raise the nozzle
#if DISABLED(NO_VOLUMETRICS)
parser.volumetric_enabled = volumetric_was_enabled;
@ -871,7 +866,7 @@ void GcodeSuite::G26() {
TERN_(HAS_LCD_MENU, ui.release()); // Give back control of the LCD
if (!g26_keep_heaters_on) {
if (!g26.keep_heaters_on) {
TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(0));
thermalManager.setTargetHotend(active_extruder, 0);
}

4
Marlin/src/gcode/bedlevel/M420.cpp
View File

@ -68,8 +68,8 @@ void GcodeSuite::M420() {
y_min = probe.min_y(), y_max = probe.max_y();
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
bilinear_start.set(x_min, y_min);
bilinear_grid_spacing.set((x_max - x_min) / (GRID_MAX_POINTS_X - 1),
(y_max - y_min) / (GRID_MAX_POINTS_Y - 1));
bilinear_grid_spacing.set((x_max - x_min) / (GRID_MAX_CELLS_X),
(y_max - y_min) / (GRID_MAX_CELLS_Y));
#endif
GRID_LOOP(x, y) {
Z_VALUES(x, y) = 0.001 * random(-200, 200);

6
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@ -295,10 +295,10 @@ G29_TYPE GcodeSuite::G29() {
// Get nearest i / j from rx / ry
i = (rx - bilinear_start.x + 0.5 * abl.gridSpacing.x) / abl.gridSpacing.x;
j = (ry - bilinear_start.y + 0.5 * abl.gridSpacing.y) / abl.gridSpacing.y;
LIMIT(i, 0, GRID_MAX_POINTS_X - 1);
LIMIT(j, 0, GRID_MAX_POINTS_Y - 1);
LIMIT(i, 0, (GRID_MAX_POINTS_X) - 1);
LIMIT(j, 0, (GRID_MAX_POINTS_Y) - 1);
}
if (WITHIN(i, 0, GRID_MAX_POINTS_X - 1) && WITHIN(j, 0, GRID_MAX_POINTS_Y)) {
if (WITHIN(i, 0, (GRID_MAX_POINTS_X) - 1) && WITHIN(j, 0, (GRID_MAX_POINTS_Y) - 1)) {
set_bed_leveling_enabled(false);
z_values[i][j] = rz;
TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate());

10
Marlin/src/gcode/bedlevel/mbl/G29.cpp
View File

@ -106,7 +106,7 @@ void GcodeSuite::G29() {
SET_SOFT_ENDSTOP_LOOSE(false);
}
// If there's another point to sample, move there with optional lift.
if (mbl_probe_index < GRID_MAX_POINTS) {
if (mbl_probe_index < (GRID_MAX_POINTS)) {
// Disable software endstops to allow manual adjustment
// If G29 is left hanging without completion they won't be re-enabled!
SET_SOFT_ENDSTOP_LOOSE(true);
@ -142,8 +142,8 @@ void GcodeSuite::G29() {
case MeshSet:
if (parser.seenval('I')) {
ix = parser.value_int();
if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1)) {
SERIAL_ECHOLNPAIR("I out of range (0-", GRID_MAX_POINTS_X - 1, ")");
if (!WITHIN(ix, 0, (GRID_MAX_POINTS_X) - 1)) {
SERIAL_ECHOLNPAIR("I out of range (0-", (GRID_MAX_POINTS_X) - 1, ")");
return;
}
}
@ -152,8 +152,8 @@ void GcodeSuite::G29() {
if (parser.seenval('J')) {
iy = parser.value_int();
if (!WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_ECHOLNPAIR("J out of range (0-", GRID_MAX_POINTS_Y - 1, ")");
if (!WITHIN(iy, 0, (GRID_MAX_POINTS_Y) - 1)) {
SERIAL_ECHOLNPAIR("J out of range (0-", (GRID_MAX_POINTS_Y) - 1, ")");
return;
}
}

5
Marlin/src/inc/Conditionals_post.h
View File

@ -224,6 +224,11 @@
#endif
#endif
#ifdef GRID_MAX_POINTS_X
#define GRID_MAX_CELLS_X (GRID_MAX_POINTS_X - 1)
#define GRID_MAX_CELLS_Y (GRID_MAX_POINTS_Y - 1)
#endif
/**
* Host keep alive
*/

6
Marlin/src/inc/SanityCheck.h
View File

@ -1263,9 +1263,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#elif ENABLED(DELTA_CALIBRATION_MENU) && !HAS_LCD_MENU
#error "DELTA_CALIBRATION_MENU requires an LCD Controller."
#elif ABL_USES_GRID
#if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
#if ((GRID_MAX_POINTS_X) & 1) == 0 || ((GRID_MAX_POINTS_Y) & 1) == 0
#error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
#elif GRID_MAX_POINTS_X < 3
#elif (GRID_MAX_POINTS_X) < 3
#error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher."
#endif
#endif
@ -1518,7 +1518,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
// Mesh Bed Leveling
#if ENABLED(DELTA)
#error "MESH_BED_LEVELING is not compatible with DELTA printers."
#elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
#elif (GRID_MAX_POINTS_X) > 9 || (GRID_MAX_POINTS_Y) > 9
#error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL."
#endif

2
Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
View File

@ -1279,7 +1279,7 @@ void MarlinUI::draw_status_screen() {
pixels_per_x_mesh_pnt, pixels_per_y_mesh_pnt,
suppress_x_offset = 0, suppress_y_offset = 0;
const uint8_t y_plot_inv = (GRID_MAX_POINTS_Y - 1) - y_plot;
const uint8_t y_plot_inv = (GRID_MAX_POINTS_Y) - 1 - y_plot;
upper_left.column = 0;
upper_left.row = 0;

2
Marlin/src/lcd/dogm/marlinui_DOGM.cpp
View File

@ -529,7 +529,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
// Fill in the Specified Mesh Point
const uint8_t y_plot_inv = (GRID_MAX_POINTS_Y - 1) - y_plot; // The origin is typically in the lower right corner. We need to
const uint8_t y_plot_inv = (GRID_MAX_POINTS_Y) - 1 - y_plot; // The origin is typically in the lower right corner. We need to
// invert the Y to get it to plot in the right location.
const u8g_uint_t by = y_offset + y_plot_inv * pixels_per_y_mesh_pnt;

10
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.cpp
View File

@ -53,12 +53,12 @@ constexpr static float gaugeThickness = 0.25;
#endif
void BedMeshScreen::drawMesh(int16_t x, int16_t y, int16_t w, int16_t h, ExtUI::bed_mesh_t data, uint8_t opts, float autoscale_max) {
constexpr uint8_t rows = GRID_MAX_POINTS_Y;
constexpr uint8_t cols = GRID_MAX_POINTS_X;
constexpr uint8_t rows = GRID_MAX_POINTS_Y;
constexpr uint8_t cols = GRID_MAX_POINTS_X;
#define VALUE(X,Y) (data ? data[X][Y] : 0)
#define ISVAL(X,Y) (data ? !isnan(VALUE(X,Y)) : true)
#define HEIGHT(X,Y) (ISVAL(X,Y) ? (VALUE(X,Y) - val_min) * scale_z : 0)
#define VALUE(X,Y) (data ? data[X][Y] : 0)
#define ISVAL(X,Y) (data ? !isnan(VALUE(X,Y)) : true)
#define HEIGHT(X,Y) (ISVAL(X,Y) ? (VALUE(X,Y) - val_min) * scale_z : 0)
// Compute the mean, min and max for the points

2
Marlin/src/lcd/extui/ui_api.cpp
View File

@ -859,7 +859,7 @@ namespace ExtUI {
bed_mesh_t& getMeshArray() { return Z_VALUES_ARR; }
float getMeshPoint(const xy_uint8_t &pos) { return Z_VALUES(pos.x, pos.y); }
void setMeshPoint(const xy_uint8_t &pos, const_float_t zoff) {
if (WITHIN(pos.x, 0, GRID_MAX_POINTS_X) && WITHIN(pos.y, 0, GRID_MAX_POINTS_Y)) {
if (WITHIN(pos.x, 0, (GRID_MAX_POINTS_X) - 1) && WITHIN(pos.y, 0, (GRID_MAX_POINTS_Y) - 1)) {
Z_VALUES(pos.x, pos.y) = zoff;
TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate());
}

4
Marlin/src/lcd/menu/menu_bed_leveling.cpp
View File

@ -214,8 +214,8 @@
static uint8_t xind, yind; // =0
START_MENU();
BACK_ITEM(MSG_BED_LEVELING);
EDIT_ITEM(uint8, MSG_MESH_X, &xind, 0, GRID_MAX_POINTS_X - 1);
EDIT_ITEM(uint8, MSG_MESH_Y, &yind, 0, GRID_MAX_POINTS_Y - 1);
EDIT_ITEM(uint8, MSG_MESH_X, &xind, 0, (GRID_MAX_POINTS_X) - 1);
EDIT_ITEM(uint8, MSG_MESH_Y, &yind, 0, (GRID_MAX_POINTS_Y) - 1);
EDIT_ITEM_FAST(float43, MSG_MESH_EDIT_Z, &Z_VALUES(xind, yind), -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5, refresh_planner);
END_MENU();
}

4
Marlin/src/lcd/menu/menu_ubl.cpp
View File

@ -484,8 +484,8 @@ void ubl_map_screen() {
#if IS_KINEMATIC
n_edit_pts = 9; // TODO: Delta accessible edit points
#else
const bool xc = WITHIN(x, 1, GRID_MAX_POINTS_X - 2),
yc = WITHIN(y, 1, GRID_MAX_POINTS_Y - 2);
const bool xc = WITHIN(x, 1, (GRID_MAX_POINTS_X) - 2),
yc = WITHIN(y, 1, (GRID_MAX_POINTS_Y) - 2);
n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners
#endif

14
Marlin/src/lcd/tft/ui_320x240.cpp
View File

@ -462,12 +462,12 @@ void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const
tft.set_background(COLOR_BACKGROUND);
tft.add_rectangle(0, 0, GRID_WIDTH, GRID_HEIGHT, COLOR_WHITE);
for (uint16_t x = 0; x < GRID_MAX_POINTS_X ; x++)
for (uint16_t y = 0; y < GRID_MAX_POINTS_Y ; y++)
for (uint16_t x = 0; x < (GRID_MAX_POINTS_X); x++)
for (uint16_t y = 0; y < (GRID_MAX_POINTS_Y); y++)
if (position_is_reachable({ ubl.mesh_index_to_xpos(x), ubl.mesh_index_to_ypos(y) }))
tft.add_bar(1 + (x * 2 + 1) * (GRID_WIDTH - 4) / GRID_MAX_POINTS_X / 2, GRID_HEIGHT - 3 - ((y * 2 + 1) * (GRID_HEIGHT - 4) / GRID_MAX_POINTS_Y / 2), 2, 2, COLOR_UBL);
tft.add_bar(1 + (x * 2 + 1) * (GRID_WIDTH - 4) / (GRID_MAX_POINTS_X) / 2, GRID_HEIGHT - 3 - ((y * 2 + 1) * (GRID_HEIGHT - 4) / (GRID_MAX_POINTS_Y) / 2), 2, 2, COLOR_UBL);
tft.add_rectangle((x_plot * 2 + 1) * (GRID_WIDTH - 4) / GRID_MAX_POINTS_X / 2 - 1, GRID_HEIGHT - 5 - ((y_plot * 2 + 1) * (GRID_HEIGHT - 4) / GRID_MAX_POINTS_Y / 2), 6, 6, COLOR_UBL);
tft.add_rectangle((x_plot * 2 + 1) * (GRID_WIDTH - 4) / (GRID_MAX_POINTS_X) / 2 - 1, GRID_HEIGHT - 5 - ((y_plot * 2 + 1) * (GRID_HEIGHT - 4) / (GRID_MAX_POINTS_Y) / 2), 6, 6, COLOR_UBL);
const xy_pos_t pos = { ubl.mesh_index_to_xpos(x_plot), ubl.mesh_index_to_ypos(y_plot) },
lpos = pos.asLogical();
@ -512,9 +512,9 @@ void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const
#if ENABLED(TOUCH_SCREEN)
touch.clear();
draw_menu_navigation = false;
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + CONTROL_OFFSET, UBL, ENCODER_STEPS_PER_MENU_ITEM * GRID_MAX_POINTS_X, imgUp);
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT - CONTROL_OFFSET - 32, UBL, - ENCODER_STEPS_PER_MENU_ITEM * GRID_MAX_POINTS_X, imgDown);
add_control(GRID_OFFSET_X + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, - ENCODER_STEPS_PER_MENU_ITEM, imgLeft);
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + CONTROL_OFFSET, UBL, (ENCODER_STEPS_PER_MENU_ITEM) * (GRID_MAX_POINTS_X), imgUp);
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT - CONTROL_OFFSET - 32, UBL, -(ENCODER_STEPS_PER_MENU_ITEM) * (GRID_MAX_POINTS_X), imgDown);
add_control(GRID_OFFSET_X + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, -(ENCODER_STEPS_PER_MENU_ITEM), imgLeft);
add_control(GRID_OFFSET_X + GRID_WIDTH - CONTROL_OFFSET - 32, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, ENCODER_STEPS_PER_MENU_ITEM, imgRight);
add_control(224, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, CLICK, imgLeveling);
add_control(144, 206, BACK, imgBack);

14
Marlin/src/lcd/tft/ui_480x320.cpp
View File

@ -462,12 +462,12 @@ void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const
tft.set_background(COLOR_BACKGROUND);
tft.add_rectangle(0, 0, GRID_WIDTH, GRID_HEIGHT, COLOR_WHITE);
for (uint16_t x = 0; x < GRID_MAX_POINTS_X ; x++)
for (uint16_t y = 0; y < GRID_MAX_POINTS_Y ; y++)
for (uint16_t x = 0; x < (GRID_MAX_POINTS_X); x++)
for (uint16_t y = 0; y < (GRID_MAX_POINTS_Y); y++)
if (position_is_reachable({ ubl.mesh_index_to_xpos(x), ubl.mesh_index_to_ypos(y) }))
tft.add_bar(1 + (x * 2 + 1) * (GRID_WIDTH - 4) / GRID_MAX_POINTS_X / 2, GRID_HEIGHT - 3 - ((y * 2 + 1) * (GRID_HEIGHT - 4) / GRID_MAX_POINTS_Y / 2), 2, 2, COLOR_UBL);
tft.add_bar(1 + (x * 2 + 1) * (GRID_WIDTH - 4) / (GRID_MAX_POINTS_X) / 2, GRID_HEIGHT - 3 - ((y * 2 + 1) * (GRID_HEIGHT - 4) / (GRID_MAX_POINTS_Y) / 2), 2, 2, COLOR_UBL);
tft.add_rectangle((x_plot * 2 + 1) * (GRID_WIDTH - 4) / GRID_MAX_POINTS_X / 2 - 1, GRID_HEIGHT - 5 - ((y_plot * 2 + 1) * (GRID_HEIGHT - 4) / GRID_MAX_POINTS_Y / 2), 6, 6, COLOR_UBL);
tft.add_rectangle((x_plot * 2 + 1) * (GRID_WIDTH - 4) / (GRID_MAX_POINTS_X) / 2 - 1, GRID_HEIGHT - 5 - ((y_plot * 2 + 1) * (GRID_HEIGHT - 4) / (GRID_MAX_POINTS_Y) / 2), 6, 6, COLOR_UBL);
const xy_pos_t pos = { ubl.mesh_index_to_xpos(x_plot), ubl.mesh_index_to_ypos(y_plot) },
lpos = pos.asLogical();
@ -512,9 +512,9 @@ void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const
#if ENABLED(TOUCH_SCREEN)
touch.clear();
draw_menu_navigation = false;
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + CONTROL_OFFSET, UBL, ENCODER_STEPS_PER_MENU_ITEM * GRID_MAX_POINTS_X, imgUp);
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT - CONTROL_OFFSET - 32, UBL, - ENCODER_STEPS_PER_MENU_ITEM * GRID_MAX_POINTS_X, imgDown);
add_control(GRID_OFFSET_X + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, - ENCODER_STEPS_PER_MENU_ITEM, imgLeft);
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + CONTROL_OFFSET, UBL, (ENCODER_STEPS_PER_MENU_ITEM) * (GRID_MAX_POINTS_X), imgUp);
add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT - CONTROL_OFFSET - 32, UBL, -(ENCODER_STEPS_PER_MENU_ITEM) * (GRID_MAX_POINTS_X), imgDown);
add_control(GRID_OFFSET_X + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, -(ENCODER_STEPS_PER_MENU_ITEM), imgLeft);
add_control(GRID_OFFSET_X + GRID_WIDTH - CONTROL_OFFSET - 32, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, ENCODER_STEPS_PER_MENU_ITEM, imgRight);
add_control(320, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, CLICK, imgLeveling);
add_control(224, TFT_HEIGHT - 34, BACK, imgBack);

4
Marlin/src/module/settings.cpp
View File

@ -1605,7 +1605,7 @@ void MarlinSettings::postprocess() {
#if ENABLED(MESH_BED_LEVELING)
if (!validating) mbl.z_offset = dummyf;
if (mesh_num_x == GRID_MAX_POINTS_X && mesh_num_y == GRID_MAX_POINTS_Y) {
if (mesh_num_x == (GRID_MAX_POINTS_X) && mesh_num_y == (GRID_MAX_POINTS_Y)) {
// EEPROM data fits the current mesh
EEPROM_READ(mbl.z_values);
}
@ -1652,7 +1652,7 @@ void MarlinSettings::postprocess() {
EEPROM_READ_ALWAYS(grid_max_x); // 1 byte
EEPROM_READ_ALWAYS(grid_max_y); // 1 byte
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (grid_max_x == GRID_MAX_POINTS_X && grid_max_y == GRID_MAX_POINTS_Y) {
if (grid_max_x == (GRID_MAX_POINTS_X) && grid_max_y == (GRID_MAX_POINTS_Y)) {
if (!validating) set_bed_leveling_enabled(false);
EEPROM_READ(bilinear_grid_spacing); // 2 ints
EEPROM_READ(bilinear_start); // 2 ints