bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Mark axes not-homed with HOME_AFTER_DEACTIVATE (#18907)

Browse Source
This commit is contained in:
swissnorp 2020-08-27 23:05:53 +02:00 committed by Scott Lahteine
parent d10f7eae31
commit 7d2e4481c7
20 changed files with 40 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Marlin/src/feature/babystep.cpp
View File

@ -26,7 +26,8 @@
#include "babystep.h"
#include "../MarlinCore.h"
#include "../module/planner.h"
#include "../module/motion.h" // for axes_should_home()
#include "../module/planner.h" // for axis_steps_per_mm[]
#include "../module/stepper.h"
#if ENABLED(BABYSTEP_ALWAYS_AVAILABLE)
@ -54,7 +55,7 @@ void Babystep::add_mm(const AxisEnum axis, const float &mm) {
}
void Babystep::add_steps(const AxisEnum axis, const int16_t distance) {
if (DISABLED(BABYSTEP_WITHOUT_HOMING) && !TEST(axis_known_position, axis)) return;
if (DISABLED(BABYSTEP_WITHOUT_HOMING) && axes_should_home(_BV(axis))) return;
accum += distance; // Count up babysteps for the UI
steps[BS_AXIS_IND(axis)] += distance;

2
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -321,7 +321,7 @@
// Check for commands that require the printer to be homed
if (may_move) {
planner.synchronize();
if (axes_need_homing()) gcode.home_all_axes();
if (axes_should_home()) gcode.home_all_axes();
TERN_(HAS_MULTI_HOTEND, if (active_extruder) tool_change(0));
}

2
Marlin/src/feature/pause.cpp
View File

@ -413,7 +413,7 @@ bool pause_print(const float &retract, const xyz_pos_t &park_point, const float
unscaled_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
// Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos)
if (!axes_need_homing())
if (!axes_should_home())
nozzle.park(0, park_point);
#if ENABLED(DUAL_X_CARRIAGE)

2
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -490,7 +490,7 @@ void GcodeSuite::G26() {
// Don't allow Mesh Validation without homing first,
// or if the parameter parsing did not go OK, abort
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
// Change the tool first, if specified
if (parser.seenval('T')) tool_change(parser.value_int());

2
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@ -183,7 +183,7 @@ G29_TYPE GcodeSuite::G29() {
faux = ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY) ? parser.boolval('C') : no_action;
// Don't allow auto-leveling without homing first
if (axis_unhomed_error()) G29_RETURN(false);
if (homing_needed_error()) G29_RETURN(false);
if (!no_action && planner.leveling_active && parser.boolval('O')) { // Auto-level only if needed
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> Auto-level not needed, skip");

6
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -118,7 +118,7 @@
DEBUG_SECTION(log_G28, "home_z_safely", DEBUGGING(LEVELING));
// Disallow Z homing if X or Y homing is needed
if (axis_unhomed_error(_BV(X_AXIS) | _BV(Y_AXIS))) return;
if (homing_needed_error(_BV(X_AXIS) | _BV(Y_AXIS))) return;
sync_plan_position();
@ -299,8 +299,8 @@ void GcodeSuite::G28() {
#else // NOT DELTA
const bool homeZ = parser.seen('Z'),
needX = homeZ && TERN0(Z_SAFE_HOMING, axes_need_homing(_BV(X_AXIS))),
needY = homeZ && TERN0(Z_SAFE_HOMING, axes_need_homing(_BV(Y_AXIS))),
needX = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(X_AXIS))),
needY = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(Y_AXIS))),
homeX = needX || parser.seen('X'), homeY = needY || parser.seen('Y'),
home_all = homeX == homeY && homeX == homeZ, // All or None
doX = home_all || homeX, doY = home_all || homeY, doZ = home_all || homeZ;

2
Marlin/src/gcode/calibrate/G425.cpp
View File

@ -584,7 +584,7 @@ void GcodeSuite::G425() {
TEMPORARY_SOFT_ENDSTOP_STATE(false);
TEMPORARY_BED_LEVELING_STATE(false);
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
measurements_t m;

2
Marlin/src/gcode/calibrate/M48.cpp
View File

@ -55,7 +55,7 @@ extern const char SP_Y_STR[];
void GcodeSuite::M48() {
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
const int8_t verbose_level = parser.byteval('V', 1);
if (!WITHIN(verbose_level, 0, 4)) {

2
Marlin/src/gcode/feature/camera/M240.cpp
View File

@ -126,7 +126,7 @@ void GcodeSuite::M240() {
#ifdef PHOTO_POSITION
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
const xyz_pos_t old_pos = {
current_position.x + parser.linearval('A'),

2
Marlin/src/gcode/feature/clean/G12.cpp
View File

@ -45,7 +45,7 @@
*/
void GcodeSuite::G12() {
// Don't allow nozzle cleaning without homing first
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
#ifdef WIPE_SEQUENCE_COMMANDS
if (!parser.seen_any()) {

2
Marlin/src/gcode/feature/pause/G27.cpp
View File

@ -34,7 +34,7 @@
*/
void GcodeSuite::G27() {
// Don't allow nozzle parking without homing first
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
nozzle.park(parser.ushortval('P'));
}

4
Marlin/src/gcode/feature/pause/M701_M702.cpp
View File

@ -61,7 +61,7 @@ void GcodeSuite::M701() {
#if ENABLED(NO_MOTION_BEFORE_HOMING)
// Don't raise Z if the machine isn't homed
if (axes_need_homing()) park_point.z = 0;
if (axes_should_home()) park_point.z = 0;
#endif
#if ENABLED(MIXING_EXTRUDER)
@ -149,7 +149,7 @@ void GcodeSuite::M702() {
#if ENABLED(NO_MOTION_BEFORE_HOMING)
// Don't raise Z if the machine isn't homed
if (axes_need_homing()) park_point.z = 0;
if (axes_should_home()) park_point.z = 0;
#endif
#if ENABLED(MIXING_EXTRUDER)

2
Marlin/src/gcode/geometry/M206_M428.cpp
View File

@ -61,7 +61,7 @@ void GcodeSuite::M206() {
* Use M206 to set these values directly.
*/
void GcodeSuite::M428() {
if (axis_unhomed_error()) return;
if (homing_needed_error()) return;
xyz_float_t diff;
LOOP_XYZ(i) {

2
Marlin/src/gcode/motion/G0_G1.cpp
View File

@ -52,7 +52,7 @@ void GcodeSuite::G0_G1(
if (IsRunning()
#if ENABLED(NO_MOTION_BEFORE_HOMING)
&& !axis_unhomed_error(
&& !homing_needed_error(
(parser.seen('X') ? _BV(X_AXIS) : 0)
| (parser.seen('Y') ? _BV(Y_AXIS) : 0)
| (parser.seen('Z') ? _BV(Z_AXIS) : 0) )

2
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@ -181,7 +181,7 @@ void menu_advanced_settings();
#if ENABLED(DUAL_X_CARRIAGE)
void menu_idex() {
const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS));
const bool need_g28 = axes_should_home(_BV(Y_AXIS)|_BV(Z_AXIS));
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);

15
Marlin/src/module/motion.cpp
View File

@ -1097,17 +1097,16 @@ void prepare_line_to_destination() {
current_position = destination;
}
uint8_t axes_need_homing(uint8_t axis_bits/*=0x07*/) {
#define HOMED_FLAGS TERN(HOME_AFTER_DEACTIVATE, axis_known_position, axis_homed)
// Clear test bits that are homed
if (TEST(axis_bits, X_AXIS) && TEST(HOMED_FLAGS, X_AXIS)) CBI(axis_bits, X_AXIS);
if (TEST(axis_bits, Y_AXIS) && TEST(HOMED_FLAGS, Y_AXIS)) CBI(axis_bits, Y_AXIS);
if (TEST(axis_bits, Z_AXIS) && TEST(HOMED_FLAGS, Z_AXIS)) CBI(axis_bits, Z_AXIS);
uint8_t axes_should_home(uint8_t axis_bits/*=0x07*/) {
// Clear test bits that are trusted
if (TEST(axis_bits, X_AXIS) && TEST(axis_homed, X_AXIS)) CBI(axis_bits, X_AXIS);
if (TEST(axis_bits, Y_AXIS) && TEST(axis_homed, Y_AXIS)) CBI(axis_bits, Y_AXIS);
if (TEST(axis_bits, Z_AXIS) && TEST(axis_homed, Z_AXIS)) CBI(axis_bits, Z_AXIS);
return axis_bits;
}
bool axis_unhomed_error(uint8_t axis_bits/*=0x07*/) {
if ((axis_bits = axes_need_homing(axis_bits))) {
bool homing_needed_error(uint8_t axis_bits/*=0x07*/) {
if ((axis_bits = axes_should_home(axis_bits))) {
PGM_P home_first = GET_TEXT(MSG_HOME_FIRST);
char msg[strlen_P(home_first)+1];
sprintf_P(msg, home_first,

19
Marlin/src/module/motion.h
View File

@ -40,8 +40,7 @@ constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS);
FORCE_INLINE bool no_axes_homed() { return !axis_homed; }
FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; }
FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; }
FORCE_INLINE void set_all_unhomed() { axis_homed = 0; }
FORCE_INLINE void set_all_unknown() { axis_known_position = 0; }
FORCE_INLINE void set_all_unhomed() { axis_homed = axis_known_position = 0; }
FORCE_INLINE bool homing_needed() {
return !TERN(HOME_AFTER_DEACTIVATE, all_axes_known, all_axes_homed)();
@ -239,22 +238,18 @@ void do_z_clearance(const float &zclear, const bool z_known=true, const bool rai
//
// Homing
//
uint8_t axes_need_homing(uint8_t axis_bits=0x07);
bool axis_unhomed_error(uint8_t axis_bits=0x07);
void homeaxis(const AxisEnum axis);
void set_axis_is_at_home(const AxisEnum axis);
void set_axis_never_homed(const AxisEnum axis);
uint8_t axes_should_home(uint8_t axis_bits=0x07);
bool homing_needed_error(uint8_t axis_bits=0x07);
#if ENABLED(NO_MOTION_BEFORE_HOMING)
#define MOTION_CONDITIONS (IsRunning() && !axis_unhomed_error())
#define MOTION_CONDITIONS (IsRunning() && !homing_needed_error())
#else
#define MOTION_CONDITIONS IsRunning()
#endif
void set_axis_is_at_home(const AxisEnum axis);
void set_axis_never_homed(const AxisEnum axis);
void homeaxis(const AxisEnum axis);
/**
* Workspace offsets
*/

2
Marlin/src/module/probe.cpp
View File

@ -359,7 +359,7 @@ bool Probe::set_deployed(const bool deploy) {
do_z_raise(_MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_CLEARANCE_DEPLOY_PROBE));
#if EITHER(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY)
if (axis_unhomed_error(TERN_(Z_PROBE_SLED, _BV(X_AXIS)))) {
if (homing_needed_error(TERN_(Z_PROBE_SLED, _BV(X_AXIS)))) {
SERIAL_ERROR_MSG(STR_STOP_UNHOMED);
stop();
return true;

7
Marlin/src/module/stepper/indirection.h
View File

@ -840,12 +840,13 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
//
// Axis steppers enable / disable macros
//
#define FORGET_AXIS(A) TERN(HOME_AFTER_DEACTIVATE, set_axis_never_homed(A), CBI(axis_known_position, A))
#define ENABLE_AXIS_X() do{ ENABLE_STEPPER_X(); ENABLE_STEPPER_X2(); }while(0)
#define DISABLE_AXIS_X() do{ DISABLE_STEPPER_X(); DISABLE_STEPPER_X2(); CBI(axis_known_position, X_AXIS); }while(0)
#define DISABLE_AXIS_X() do{ DISABLE_STEPPER_X(); DISABLE_STEPPER_X2(); FORGET_AXIS(X_AXIS); }while(0)
#define ENABLE_AXIS_Y() do{ ENABLE_STEPPER_Y(); ENABLE_STEPPER_Y2(); }while(0)
#define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); CBI(axis_known_position, Y_AXIS); }while(0)
#define DISABLE_AXIS_Y() do{ DISABLE_STEPPER_Y(); DISABLE_STEPPER_Y2(); FORGET_AXIS(Y_AXIS); }while(0)
#define ENABLE_AXIS_Z() do{ ENABLE_STEPPER_Z(); ENABLE_STEPPER_Z2(); ENABLE_STEPPER_Z3(); ENABLE_STEPPER_Z4(); }while(0)
@ -854,7 +855,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#else
#define Z_RESET()
#endif
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); CBI(axis_known_position, Z_AXIS); Z_RESET(); }while(0)
#define DISABLE_AXIS_Z() do{ DISABLE_STEPPER_Z(); DISABLE_STEPPER_Z2(); DISABLE_STEPPER_Z3(); DISABLE_STEPPER_Z4(); FORGET_AXIS(Z_AXIS); Z_RESET(); }while(0)
//
// Extruder steppers enable / disable macros

2
Marlin/src/module/tool_change.cpp
View File

@ -174,7 +174,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
grabpos = mpe_settings.parking_xpos[new_tool] + (new_tool ? mpe_settings.grab_distance : -mpe_settings.grab_distance),
offsetcompensation = TERN0(HAS_HOTEND_OFFSET, hotend_offset[active_extruder].x * mpe_settings.compensation_factor);
if (axis_unhomed_error(_BV(X_AXIS))) return;
if (homing_needed_error(_BV(X_AXIS))) return;
/**
* Z Lift and Nozzle Offset shift ar defined in caller method to work equal with any Multi Hotend realization