bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Use US spelling of 'behavior'

Browse Source
This commit is contained in:
Scott Lahteine
2019-05-15 01:49:17 -05:00
parent 7f1e0c5670
commit 785c01f2bc
82 changed files with 237 additions and 237 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/feature/bltouch.cpp
View File

@ -114,7 +114,7 @@ bool BLTouch::stow_proc() {
// At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin.
// So even though we know a STOW will be ignored if an ALARM condition is active, we will STOW.
// Note: If the probe is deployed AND in an ALARM condition, this STOW will not pull up the pin
// and the ALARM condition will still be there. --> ANTClabs should change this behaviour maybe
// and the ALARM condition will still be there. --> ANTClabs should change this behavior maybe
// Attempt to STOW, wait for STOW_DELAY or ALARM
if (_stow_query_alarm()) {

4
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -87,7 +87,7 @@
* D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this
* command to see how well a Mesh as been adjusted to match a print surface. In order to do
* this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
* alters the command's normal behaviour and disables the Unified Bed Leveling System even if
* alters the command's normal behavior and disables the Unified Bed Leveling System even if
* it is on.
*
* H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
@ -131,7 +131,7 @@
* U # Random Randomize the order that the circles are drawn on the bed. The search for the closest
* un-drawn circle is still done. But the distance to the location for each circle has a
* random number of the specified size added to it. Specifying S50 will give an interesting
* deviation from the normal behaviour on a 10 x 10 Mesh.
* deviation from the normal behavior on a 10 x 10 Mesh.
*
* X # X Coord. Specify the starting location of the drawing activity.
*

2
Marlin/src/gcode/config/M301.cpp
View File

@ -42,7 +42,7 @@
void GcodeSuite::M301() {
// multi-extruder PID patch: M301 updates or prints a single extruder's PID values
// default behaviour (omitting E parameter) is to update for extruder 0 only
// default behavior (omitting E parameter) is to update for extruder 0 only
const uint8_t e = parser.byteval('E'); // extruder being updated
if (e < HOTENDS) { // catch bad input value

2
Marlin/src/gcode/control/M999.cpp
View File

@ -29,7 +29,7 @@
/**
* M999: Restart after being stopped
*
* Default behaviour is to flush the serial buffer and request
* Default behavior is to flush the serial buffer and request
* a resend to the host starting on the last N line received.
*
* Sending "M999 S1" will resume printing without flushing the

2
Marlin/src/module/thermistor/thermistor_20.h
View File

@ -22,7 +22,7 @@
// PT100 with INA826 amp on Ultimaker v2.0 electronics
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
// This does not match the normal thermistor behaviour so we need to set the following defines
// This does not match the normal thermistor behavior so we need to set the following defines
#if THERMISTOR_HEATER_0 == 20
#define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0