Fix some Power Loss Recovery behaviors (#18558)

This commit is contained in:
Jason Smith 2020-07-14 23:14:03 -07:00 committed by GitHub
parent 55e519a06f
commit 76b67d55e2
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 168 additions and 110 deletions

View File

@ -394,6 +394,13 @@ void disable_all_steppers() {
constexpr bool did_pause_print = false;
#endif
/**
* A Print Job exists when the timer is running or SD printing
*/
bool printJobOngoing() {
return print_job_timer.isRunning() || IS_SD_PRINTING();
}
/**
* Printing is active when the print job timer is running
*/
@ -690,7 +697,7 @@ void idle(TERN_(ADVANCED_PAUSE_FEATURE, bool no_stepper_sleep/*=false*/)) {
// Handle Power-Loss Recovery
#if ENABLED(POWER_LOSS_RECOVERY) && PIN_EXISTS(POWER_LOSS)
recovery.outage();
if (printJobOngoing()) recovery.outage();
#endif
// Run StallGuard endstop checks

View File

@ -66,12 +66,16 @@ PrintJobRecovery recovery;
#ifndef POWER_LOSS_PURGE_LEN
#define POWER_LOSS_PURGE_LEN 0
#endif
#ifndef POWER_LOSS_ZRAISE
#define POWER_LOSS_ZRAISE 2 // Move on loss with backup power, or on resume without it
#endif
#if DISABLED(BACKUP_POWER_SUPPLY)
#undef POWER_LOSS_RETRACT_LEN // No retract at outage without backup power
#endif
#ifndef POWER_LOSS_RETRACT_LEN
#define POWER_LOSS_RETRACT_LEN 0
#endif
#ifndef POWER_LOSS_ZRAISE
#define POWER_LOSS_ZRAISE 2
#endif
/**
* Clear the recovery info
@ -144,7 +148,7 @@ void PrintJobRecovery::prepare() {
/**
* Save the current machine state to the power-loss recovery file
*/
void PrintJobRecovery::save(const bool force/*=false*/) {
void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/) {
#if SAVE_INFO_INTERVAL_MS > 0
static millis_t next_save_ms; // = 0
@ -177,6 +181,7 @@ void PrintJobRecovery::save(const bool force/*=false*/) {
// Machine state
info.current_position = current_position;
info.zraise = zraise;
TERN_(HAS_HOME_OFFSET, info.home_offset = home_offset);
TERN_(HAS_POSITION_SHIFT, info.position_shift = position_shift);
info.feedrate = uint16_t(feedrate_mm_s * 60.0f);
@ -228,31 +233,74 @@ void PrintJobRecovery::save(const bool force/*=false*/) {
#if PIN_EXISTS(POWER_LOSS)
void PrintJobRecovery::_outage() {
#if ENABLED(BACKUP_POWER_SUPPLY)
static bool lock = false;
if (lock) return; // No re-entrance from idle() during raise_z()
lock = true;
#endif
if (IS_SD_PRINTING()) save(true);
TERN_(BACKUP_POWER_SUPPLY, raise_z());
kill(GET_TEXT(MSG_OUTAGE_RECOVERY));
}
#if ENABLED(BACKUP_POWER_SUPPLY)
void PrintJobRecovery::raise_z() {
// Disable all heaters to reduce power loss
thermalManager.disable_all_heaters();
quickstop_stepper();
// Raise Z axis
gcode.process_subcommands_now_P(PSTR("G91\nG0 Z" STRINGIFY(POWER_LOSS_ZRAISE)));
planner.synchronize();
void PrintJobRecovery::retract_and_lift(const float &zraise) {
#if POWER_LOSS_RETRACT_LEN || POWER_LOSS_ZRAISE
gcode.set_relative_mode(true); // Use relative coordinates
#if POWER_LOSS_RETRACT_LEN
// Retract filament now
gcode.process_subcommands_now_P(PSTR("G1 F3000 E-" STRINGIFY(POWER_LOSS_RETRACT_LEN)));
#endif
#if POWER_LOSS_ZRAISE
// Raise the Z axis now
if (zraise) {
char cmd[20], str_1[16];
sprintf_P(cmd, PSTR("G0 Z%s"), dtostrf(zraise, 1, 3, str_1));
gcode.process_subcommands_now(cmd);
}
#else
UNUSED(zraise);
#endif
//gcode.axis_relative = info.axis_relative;
planner.synchronize();
#endif
}
#endif
/**
* An outage was detected by a sensor pin.
* - If not SD printing, let the machine turn off on its own with no "KILL" screen
* - Disable all heaters first to save energy
* - Save the recovery data for the current instant
* - If backup power is available Retract E and Raise Z
* - Go to the KILL screen
*/
void PrintJobRecovery::_outage() {
#if ENABLED(BACKUP_POWER_SUPPLY)
static bool lock = false;
if (lock) return; // No re-entrance from idle() during retract_and_lift()
lock = true;
#endif
#if POWER_LOSS_ZRAISE
// Get the limited Z-raise to do now or on resume
const float zraise = _MAX(0, _MIN(current_position.z + POWER_LOSS_ZRAISE, Z_MAX_POS - 1) - current_position.z);
#else
constexpr float zraise = 0;
#endif
// Save, including the limited Z raise
if (IS_SD_PRINTING()) save(true, zraise);
// Disable all heaters to reduce power loss
thermalManager.disable_all_heaters();
#if ENABLED(BACKUP_POWER_SUPPLY)
// Do a hard-stop of the steppers (with possibly a loud thud)
quickstop_stepper();
// With backup power a retract and raise can be done now
retract_and_lift(zraise);
#endif
kill(GET_TEXT(MSG_OUTAGE_RECOVERY));
}
#endif
/**
@ -274,6 +322,8 @@ void PrintJobRecovery::write() {
*/
void PrintJobRecovery::resume() {
char cmd[MAX_CMD_SIZE+16], str_1[16], str_2[16];
const uint32_t resume_sdpos = info.sdpos; // Get here before the stepper ISR overwrites it
#if HAS_LEVELING
@ -282,52 +332,46 @@ void PrintJobRecovery::resume() {
#endif
// Reset E, raise Z, home XY...
gcode.process_subcommands_now_P(PSTR("G92.9 E0"
#if Z_HOME_DIR > 0
#if Z_HOME_DIR > 0
// If Z homing goes to max, just reset E and home all
"\n"
"G28R0"
TERN_(MARLIN_DEV_MODE, "S")
// If Z homing goes to max, just reset E and home all
gcode.process_subcommands_now_P(PSTR(
"G92.9 E0\n"
"G28R0" TERN_(MARLIN_DEV_MODE, "S")
));
#else // "G92.9 E0 ..."
#else // "G92.9 E0 ..."
// Set Z to 0, raise Z by RECOVERY_ZRAISE, and Home (XY only for Cartesian)
// with no raise. (Only do simulated homing in Marlin Dev Mode.)
#if ENABLED(BACKUP_POWER_SUPPLY)
"Z" STRINGIFY(POWER_LOSS_ZRAISE) // Z-axis was already raised at outage
#else
"Z0\n" // Set Z=0
"G1Z" STRINGIFY(POWER_LOSS_ZRAISE) // Raise Z
#endif
"\n"
// Set Z to 0, raise Z by info.zraise, and Home (XY only for Cartesian)
// with no raise. (Only do simulated homing in Marlin Dev Mode.)
"G28R0"
#if ENABLED(MARLIN_DEV_MODE)
"S"
#elif !IS_KINEMATIC
"XY"
#endif
#endif
));
sprintf_P(cmd, PSTR("G92.9 E0 "
#if ENABLED(BACKUP_POWER_SUPPLY)
"Z%s" // Z was already raised at outage
#else
"Z0\nG1Z%s" // Set Z=0 and Raise Z now
#endif
),
dtostrf(info.zraise, 1, 3, str_1)
);
gcode.process_subcommands_now(cmd);
gcode.process_subcommands_now_P(PSTR(
"G28R0" // No raise during G28
TERN_(MARLIN_DEV_MODE, "S") // Simulated Homing
TERN_(IS_CARTESIAN, "XY") // Don't home Z on Cartesian
));
#endif
// Pretend that all axes are homed
axis_homed = axis_known_position = xyz_bits;
char cmd[MAX_CMD_SIZE+16], str_1[16], str_2[16];
// Select the previously active tool (with no_move)
#if EXTRUDERS > 1
sprintf_P(cmd, PSTR("T%i S"), info.active_extruder);
gcode.process_subcommands_now(cmd);
#endif
// Recover volumetric extrusion state
#if DISABLED(NO_VOLUMETRICS)
#if EXTRUDERS > 1
for (int8_t e = 0; e < EXTRUDERS; e++) {
dtostrf(info.filament_size[e], 1, 3, str_1);
sprintf_P(cmd, PSTR("M200 T%i D%s"), e, str_1);
sprintf_P(cmd, PSTR("M200 T%i D%s"), e, dtostrf(info.filament_size[e], 1, 3, str_1));
gcode.process_subcommands_now(cmd);
}
if (!info.volumetric_enabled) {
@ -336,8 +380,7 @@ void PrintJobRecovery::resume() {
}
#else
if (info.volumetric_enabled) {
dtostrf(info.filament_size[0], 1, 3, str_1);
sprintf_P(cmd, PSTR("M200 D%s"), str_1);
sprintf_P(cmd, PSTR("M200 D%s"), dtostrf(info.filament_size[0], 1, 3, str_1));
gcode.process_subcommands_now(cmd);
}
#endif
@ -358,7 +401,7 @@ void PrintJobRecovery::resume() {
const int16_t et = info.target_temperature[e];
if (et) {
#if HAS_MULTI_HOTEND
sprintf_P(cmd, PSTR("T%i"), e);
sprintf_P(cmd, PSTR("T%i S"), e);
gcode.process_subcommands_now(cmd);
#endif
sprintf_P(cmd, PSTR("M109 S%i"), et);
@ -367,6 +410,12 @@ void PrintJobRecovery::resume() {
}
#endif
// Select the previously active tool (with no_move)
#if EXTRUDERS > 1
sprintf_P(cmd, PSTR("T%i S"), info.active_extruder);
gcode.process_subcommands_now(cmd);
#endif
// Restore print cooling fan speeds
FANS_LOOP(i) {
uint8_t f = info.fan_speed[i];
@ -400,18 +449,21 @@ void PrintJobRecovery::resume() {
memcpy(&mixer.gradient, &info.gradient, sizeof(info.gradient));
#endif
// Extrude and retract to clean the nozzle
#if POWER_LOSS_PURGE_LEN
//sprintf_P(cmd, PSTR("G1 E%d F200"), POWER_LOSS_PURGE_LEN);
//gcode.process_subcommands_now(cmd);
gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F200"));
// Un-retract if there was a retract at outage
#if POWER_LOSS_RETRACT_LEN
gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_RETRACT_LEN) " F3000"));
#endif
#if POWER_LOSS_RETRACT_LEN
sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN - (POWER_LOSS_RETRACT_LEN));
// Additional purge if configured
#if POWER_LOSS_PURGE_LEN
sprintf_P(cmd, PSTR("G1 E%d F200"), (POWER_LOSS_PURGE_LEN) + (POWER_LOSS_RETRACT_LEN));
gcode.process_subcommands_now(cmd);
#endif
#if ENABLED(NOZZLE_CLEAN_FEATURE)
gcode.process_subcommands_now_P(PSTR("G12"));
#endif
// Move back to the saved XY
sprintf_P(cmd, PSTR("G1 X%s Y%s F3000"),
dtostrf(info.current_position.x, 1, 3, str_1),
@ -429,13 +481,6 @@ void PrintJobRecovery::resume() {
#endif
gcode.process_subcommands_now(cmd);
// Un-retract
#if POWER_LOSS_PURGE_LEN
//sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN);
//gcode.process_subcommands_now(cmd);
gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F3000"));
#endif
// Restore the feedrate
sprintf_P(cmd, PSTR("G1 F%d"), info.feedrate);
gcode.process_subcommands_now(cmd);
@ -476,6 +521,8 @@ void PrintJobRecovery::resume() {
}
DEBUG_EOL();
DEBUG_ECHOLNPAIR("zraise: ", info.zraise);
#if HAS_HOME_OFFSET
DEBUG_ECHOPGM("home_offset: ");
LOOP_XYZ(i) {

View File

@ -26,6 +26,8 @@
*/
#include "../sd/cardreader.h"
#include "../gcode/gcode.h"
#include "../inc/MarlinConfig.h"
#if ENABLED(MIXING_EXTRUDER)
@ -45,6 +47,7 @@ typedef struct {
// Machine state
xyze_pos_t current_position;
float zraise;
#if HAS_HOME_OFFSET
xyz_pos_t home_offset;
@ -161,33 +164,34 @@ class PrintJobRecovery {
static inline void cancel() { purge(); card.autostart_index = 0; }
static void load();
static void save(const bool force=ENABLED(SAVE_EACH_CMD_MODE));
static void save(const bool force=ENABLED(SAVE_EACH_CMD_MODE), const float zraise=0);
#if PIN_EXISTS(POWER_LOSS)
static inline void outage() {
if (enabled && READ(POWER_LOSS_PIN) == POWER_LOSS_STATE)
_outage();
}
#endif
#if PIN_EXISTS(POWER_LOSS)
static inline void outage() {
if (enabled && READ(POWER_LOSS_PIN) == POWER_LOSS_STATE)
_outage();
}
#endif
static inline bool valid() { return info.valid(); }
static inline bool valid() { return info.valid(); }
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
static void debug(PGM_P const prefix);
#else
static inline void debug(PGM_P const) {}
#endif
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
static void debug(PGM_P const prefix);
#else
static inline void debug(PGM_P const) {}
#endif
private:
static void write();
#if ENABLED(BACKUP_POWER_SUPPLY)
static void raise_z();
#endif
#if ENABLED(BACKUP_POWER_SUPPLY)
static void retract_and_lift(const float &zraise);
#endif
#if PIN_EXISTS(POWER_LOSS)
static void _outage();
#endif
#if PIN_EXISTS(POWER_LOSS)
friend class GcodeSuite;
static void _outage();
#endif
};
extern PrintJobRecovery recovery;

View File

@ -50,6 +50,9 @@ void GcodeSuite::M413() {
if (parser.seen("RL")) recovery.load();
if (parser.seen('W')) recovery.save(true);
if (parser.seen('P')) recovery.purge();
#if PIN_EXISTS(POWER_LOSS)
if (parser.seen('O')) recovery._outage();
#endif
if (parser.seen('E')) serialprintPGM(recovery.exists() ? PSTR("PLR Exists\n") : PSTR("No PLR\n"));
if (parser.seen('V')) serialprintPGM(recovery.valid() ? PSTR("Valid\n") : PSTR("Invalid\n"));
#endif

View File

@ -363,7 +363,7 @@ namespace Language_en {
PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("Printing Object");
PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("Cancel Object");
PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("Cancel Object =");
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Outage Recovery");
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Power Outage");
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print from Media");
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("No Media");
PROGMEM Language_Str MSG_DWELL = _UxGT("Sleep...");

View File

@ -2026,33 +2026,29 @@ void Temperature::disable_all_heaters() {
TERN_(AUTOTEMP, planner.autotemp_enabled = false);
#if HAS_HOTEND
HOTEND_LOOP() setTargetHotend(0, e);
#endif
TERN_(HAS_HEATED_BED, setTargetBed(0));
TERN_(HAS_HEATED_CHAMBER, setTargetChamber(0));
// Unpause and reset everything
TERN_(PROBING_HEATERS_OFF, pause(false));
#define DISABLE_HEATER(N) { \
setTargetHotend(0, N); \
temp_hotend[N].soft_pwm_amount = 0; \
WRITE_HEATER_##N(LOW); \
}
#if HAS_HOTEND
HOTEND_LOOP() {
setTargetHotend(0, e);
temp_hotend[e].soft_pwm_amount = 0;
}
#endif
#if HAS_TEMP_HOTEND
#define DISABLE_HEATER(N) WRITE_HEATER_##N(LOW)
REPEAT(HOTENDS, DISABLE_HEATER);
#endif
#if HAS_HEATED_BED
temp_bed.target = 0;
setTargetBed(0);
temp_bed.soft_pwm_amount = 0;
WRITE_HEATER_BED(LOW);
#endif
#if HAS_HEATED_CHAMBER
temp_chamber.target = 0;
setTargetChamber(0);
temp_chamber.soft_pwm_amount = 0;
WRITE_HEATER_CHAMBER(LOW);
#endif

View File

@ -576,7 +576,7 @@ class Temperature {
else if (temp_hotend[ee].target == 0)
start_preheat_time(ee);
#endif
TERN_(AUTO_POWER_CONTROL, powerManager.power_on());
TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on());
temp_hotend[ee].target = _MIN(celsius, temp_range[ee].maxtemp - HOTEND_OVERSHOOT);
start_watching_hotend(ee);
}
@ -624,7 +624,7 @@ class Temperature {
#endif
static void setTargetBed(const int16_t celsius) {
TERN_(AUTO_POWER_CONTROL, powerManager.power_on());
TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on());
temp_bed.target =
#ifdef BED_MAX_TARGET
_MIN(celsius, BED_MAX_TARGET)

View File

@ -40,6 +40,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
opt_add DEBUG_POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."
#