bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ ESP32 Panda_ZHU and Panda_M4 (#22644)

Browse Source
This commit is contained in:
Mark 2021-10-05 12:23:02 +08:00 committed by Scott Lahteine
parent b8c32e24d8
commit 66048a5f27
21 changed files with 285 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/HAL/AVR/HAL_SPI.cpp
View File

@ -34,7 +34,9 @@
#include "../../inc/MarlinConfig.h"
void spiBegin() {
OUT_WRITE(SD_SS_PIN, HIGH);
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);

28
Marlin/src/HAL/ESP32/HAL.cpp
View File

@ -28,6 +28,10 @@
#include <esp_adc_cal.h>
#include <HardwareSerial.h>
#if ENABLED(USE_ESP32_TASK_WDT)
#include <esp_task_wdt.h>
#endif
#if ENABLED(WIFISUPPORT)
#include <ESPAsyncWebServer.h>
#include "wifi.h"
@ -90,8 +94,24 @@ volatile int numPWMUsed = 0,
#endif
void HAL_init_board() {
#if ENABLED(USE_ESP32_EXIO)
HardwareSerial YSerial2(2);
void Write_EXIO(uint8_t IO, uint8_t v) {
if (ISRS_ENABLED()) {
DISABLE_ISRS();
YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100));
ENABLE_ISRS();
}
else
YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100));
}
#endif
void HAL_init_board() {
#if ENABLED(USE_ESP32_TASK_WDT)
esp_task_wdt_init(10, true);
#endif
#if ENABLED(ESP3D_WIFISUPPORT)
esp3dlib.init();
#elif ENABLED(WIFISUPPORT)
@ -127,7 +147,11 @@ void HAL_init_board() {
// Initialize the i2s peripheral only if the I2S stepper stream is enabled.
// The following initialization is performed after Serial1 and Serial2 are defined as
// their native pins might conflict with the i2s stream even when they are remapped.
TERN_(I2S_STEPPER_STREAM, i2s_init());
#if ENABLED(USE_ESP32_EXIO)
YSerial2.begin(460800 * 3, SERIAL_8N1, 16, 17);
#elif ENABLED(I2S_STEPPER_STREAM)
i2s_init();
#endif
}
void HAL_idletask() {

4
Marlin/src/HAL/ESP32/HAL.h
View File

@ -142,6 +142,10 @@ void HAL_idletask();
inline void HAL_init() {}
void HAL_init_board();
#if ENABLED(USE_ESP32_EXIO)
void Write_EXIO(uint8_t IO, uint8_t v);
#endif
//
// Delay in cycles (used by DELAY_NS / DELAY_US)
//

6
Marlin/src/HAL/ESP32/HAL_SPI.cpp
View File

@ -53,11 +53,9 @@ static SPISettings spiConfig;
// ------------------------
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
}
void spiInit(uint8_t spiRate) {

6
Marlin/src/HAL/ESP32/esp32.csv Normal file
View File

@ -0,0 +1,6 @@
# Name, Type, SubType, Offset, Size, Flags
nvs, data, nvs, 0x9000, 0x5000,
otadata, data, ota, 0xe000, 0x2000,
app0, app, ota_0, 0x10000, 0x180000,
app1, app, ota_1, 0x190000, 0x180000,
spiffs, data, spiffs, 0x310000, 0xF0000,
1 # Name Type SubType Offset Size Flags
2 nvs data nvs 0x9000 0x5000
3 otadata data ota 0xe000 0x2000
4 app0 app ota_0 0x10000 0x180000
5 app1 app ota_1 0x190000 0x180000
6 spiffs data spiffs 0x310000 0xF0000

18
Marlin/src/HAL/ESP32/fastio.h
View File

@ -40,13 +40,19 @@
// Set pin as input with pullup mode
#define _PULLUP(IO, v) pinMode(IO, v ? INPUT_PULLUP : INPUT)
// Read a pin wrapper
#define READ(IO) (IS_I2S_EXPANDER_PIN(IO) ? i2s_state(I2S_EXPANDER_PIN_INDEX(IO)) : digitalRead(IO))
#if ENABLED(USE_ESP32_EXIO)
// Read a pin wrapper
#define READ(IO) digitalRead(IO)
// Write to a pin wrapper
#define WRITE(IO, v) (IO >= 100 ? Write_EXIO(IO, v) : digitalWrite(IO, v))
#else
// Read a pin wrapper
#define READ(IO) (IS_I2S_EXPANDER_PIN(IO) ? i2s_state(I2S_EXPANDER_PIN_INDEX(IO)) : digitalRead(IO))
// Write to a pin wrapper
#define WRITE(IO, v) (IS_I2S_EXPANDER_PIN(IO) ? i2s_write(I2S_EXPANDER_PIN_INDEX(IO), v) : digitalWrite(IO, v))
#endif
// Write to a pin wrapper
#define WRITE(IO, v) (IS_I2S_EXPANDER_PIN(IO) ? i2s_write(I2S_EXPANDER_PIN_INDEX(IO), v) : digitalWrite(IO, v))
// Set pin as input wrapper
// Set pin as input wrapper (0x80 | (v << 5) | (IO - 100))
#define SET_INPUT(IO) _SET_INPUT(IO)
// Set pin as input with pullup wrapper

3
Marlin/src/HAL/ESP32/i2s.cpp
View File

@ -23,6 +23,8 @@
#include "../../inc/MarlinConfigPre.h"
#if DISABLED(USE_ESP32_EXIO)
#include "i2s.h"
#include "../shared/Marduino.h"
@ -340,4 +342,5 @@ void i2s_push_sample() {
dma.current[dma.rw_pos++] = i2s_port_data;
}
#endif // !USE_ESP32_EXIO
#endif // ARDUINO_ARCH_ESP32

2
Marlin/src/HAL/ESP32/watchdog.h
View File

@ -25,7 +25,7 @@
extern "C" {
#endif
esp_err_t esp_task_wdt_reset();
esp_err_t esp_task_wdt_reset();
#ifdef __cplusplus
}

4
Marlin/src/HAL/STM32/HAL_SPI.cpp
View File

@ -47,7 +47,9 @@ static SPISettings spiConfig;
#include "../shared/Delay.h"
void spiBegin(void) {
OUT_WRITE(SD_SS_PIN, HIGH);
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SCK_PIN, HIGH);
SET_INPUT(SD_MISO_PIN);
OUT_WRITE(SD_MOSI_PIN, HIGH);

5
Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
View File

@ -36,10 +36,9 @@ static SPISettings spiConfig;
// Initialize SPI bus
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);

5
Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
View File

@ -36,10 +36,9 @@
static SPISettings spiConfig;
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);

7
Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
View File

@ -51,12 +51,9 @@ static SPISettings spiConfig;
// ------------------------
void spiBegin() {
#ifndef SD_SS_PIN
#error "SD_SS_PIN is not defined!"
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
//SET_OUTPUT(SD_SCK_PIN);
//SET_INPUT(SD_MISO_PIN);
//SET_OUTPUT(SD_MOSI_PIN);

2
Marlin/src/core/boards.h
View File

@ -422,6 +422,8 @@
#define BOARD_MRR_ESPE 6002 // MRR ESPE based on ESP32 (with I2S stepper stream)
#define BOARD_E4D_BOX 6003 // E4d@BOX
#define BOARD_FYSETC_E4 6004 // FYSETC E4
#define BOARD_PANDA_ZHU 6005 // Panda_ZHU
#define BOARD_PANDA_M4 6006 // Panda_M4
//
// SAMD51 ARM Cortex M4

1
Marlin/src/gcode/sd/M1001.cpp
View File

@ -27,6 +27,7 @@
#include "../gcode.h"
#include "../../module/planner.h"
#include "../../module/printcounter.h"
#include "../../module/temperature.h"
#include "../../sd/cardreader.h"
#ifdef SD_FINISHED_RELEASECOMMAND

4
Marlin/src/inc/SanityCheck.h
View File

@ -597,9 +597,9 @@
#error "SPINDLE_LASER_PWM (true) is now set with SPINDLE_LASER_USE_PWM (enabled)."
#endif
#if MOTHERBOARD == BOARD_DUE3DOM_MINI && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
#if MB(DUE3DOM_MINI) && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
#warning "Onboard temperature sensor for BOARD_DUE3DOM_MINI has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
#elif MOTHERBOARD == BOARD_BTT_SKR_E3_TURBO && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
#elif MB(BTT_SKR_E3_TURBO) && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD)
#warning "Onboard temperature sensor for BOARD_BTT_SKR_E3_TURBO has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)."
#endif

38
Marlin/src/pins/esp32/pins_PANDA_M4.h Normal file
View File

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Panda M4 pin assignments
*/
#define BOARD_INFO_NAME "Panda_M4"
#include "pins_PANDA_common.h"
//
// Steppers
//
#define X_ENABLE_PIN 115
#define Y_ENABLE_PIN 114
#define Z_ENABLE_PIN 113
#define E0_ENABLE_PIN 112

61
Marlin/src/pins/esp32/pins_PANDA_ZHU.h Normal file
View File

@ -0,0 +1,61 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Panda ZHU pin assignments
*/
#define BOARD_INFO_NAME "Panda_ZHU"
#include "pins_PANDA_common.h"
//
// Steppers
//
#define X_ENABLE_PIN 128 // Shared with all steppers
#define Y_ENABLE_PIN X_ENABLE_PIN
#define Z_ENABLE_PIN X_ENABLE_PIN
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define X_CS_PIN 0
//#define Y_CS_PIN 13
//#define Z_CS_PIN 5 // SS_PIN
//#define E0_CS_PIN 21
#define E1_STEP_PIN 115
#define E1_DIR_PIN 114
#define E1_ENABLE_PIN X_ENABLE_PIN
#define E2_STEP_PIN 112
#define E2_DIR_PIN 113
#define E2_ENABLE_PIN X_ENABLE_PIN
#define E3_STEP_PIN 110
#define E3_DIR_PIN 111
#define E3_ENABLE_PIN X_ENABLE_PIN
#define E4_STEP_PIN 121
#define E4_DIR_PIN 122
#define E4_ENABLE_PIN X_ENABLE_PIN
#define HEATER_1_PIN 123

98
Marlin/src/pins/esp32/pins_PANDA_common.h Normal file
View File

@ -0,0 +1,98 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Panda common pin assignments
*/
#include "env_validate.h"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos
//
#define SERVO0_PIN 0
//
// Limit Switches
//
#define X_STOP_PIN 4
#define Y_STOP_PIN 35
#define Z_STOP_PIN 21
//
// Steppers
//
#define X_STEP_PIN 101
#define X_DIR_PIN 100
#define Y_STEP_PIN 103
#define Y_DIR_PIN 102
#define Z_STEP_PIN 105
#define Z_DIR_PIN 104
#define E0_STEP_PIN 107
#define E0_DIR_PIN 106
//
// Temperature Sensors
//
#define TEMP_0_PIN 39 // Analog Input
#define TEMP_BED_PIN 36 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 108
#define HEATER_BED_PIN 109
#define FAN_PIN 118 // FAN0
#define FAN1_PIN 119 // FAN1
#ifndef E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN 120 // FAN2
#endif
//
// SD card
//
#if ENABLED(SDSUPPORT)
#define SD_MOSI_PIN 23
#define SD_MISO_PIN 19
#define SD_SCK_PIN 18
#define SDSS 5
#define SD_DETECT_PIN 2
#endif
#if HAS_WIRED_LCD
#define BEEPER_PIN 129
#define BTN_ENC 12
#define BTN_EN1 33
#define BTN_EN2 32
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 26
#define LCD_PINS_D4 14
#endif

4
Marlin/src/pins/pins.h
View File

@ -681,6 +681,10 @@
#include "esp32/pins_E4D.h" // ESP32 env:esp32
#elif MB(FYSETC_E4)
#include "esp32/pins_FYSETC_E4.h" // ESP32 env:FYSETC_E4
#elif MB(PANDA_ZHU)
#include "esp32/pins_PANDA_ZHU.h" // ESP32 env:PANDA
#elif MB(PANDA_M4)
#include "esp32/pins_PANDA_M4.h" // ESP32 env:PANDA
//
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)

10
ini/esp32.ini
View File

@ -27,3 +27,13 @@ monitor_speed = 250000
platform = espressif32@2.1.0
extends = env:esp32
board_build.partitions = default_16MB.csv
[env:PANDA]
platform = espressif32@2.1.0
extends = env:esp32
build_flags = ${env:esp32.build_flags} -DUSE_ESP32_EXIO -DUSE_ESP32_TASK_WDT
lib_deps = ${common.lib_deps}
SoftwareSerialEsp32
board_build.partitions = Marlin/src/HAL/ESP32/esp32.csv
upload_speed = 115200
monitor_speed = 115200

6
ini/stm32f1-maple.ini
View File

@ -65,8 +65,7 @@ build_flags = ${common_stm32f1.build_flags}
extra_scripts = ${common_stm32f1.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
lib_deps = ${common.lib_deps}
SoftwareSerialM
lib_deps = ${common_stm32f1.lib_deps}
USBComposite for STM32F1@0.91
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
debug_tool = stlink
@ -377,7 +376,8 @@ extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/offset_and_rename.py
build_flags = ${common_stm32f1.build_flags}
-D__STM32F1__=1 -DDEBUG_LEVEL=0 -DSS_TIMER=4 -DSERIAL_USB
lib_deps = USBComposite for STM32F1@0.91
lib_deps = ${common_stm32f1.lib_deps}
USBComposite for STM32F1@0.91
lib_ignore = Adafruit NeoPixel, SPI, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, TMCStepper
[env:STM32F103RC_ZM3E2_USB_maple]