bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

MKS H43 fixup (#21267)

Browse Source 
Co-authored-by: makerbase <4164049@qq.com>
Co-authored-by: MKS-Sean <56996910+MKS-Sean@users.noreply.github.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
This commit is contained in:
Sola 2021-03-06 23:04:05 +08:00 committed by Scott Lahteine
parent 05a124930e
commit 5b586ea4d8
17 changed files with 139 additions and 122 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/src/gcode/queue.cpp
View File

@ -610,6 +610,14 @@ void GCodeQueue::get_available_commands() {
TERN_(SDSUPPORT, get_sdcard_commands());
}
/**
* Run the entire queue in-place. Blocks SD completion/abort until complete.
*/
void GCodeQueue::exhaust() {
while (ring_buffer.occupied()) advance();
planner.synchronize();
}
/**
* Get the next command in the queue, optionally log it to SD, then dispatch it
*/

9
Marlin/src/gcode/queue.h
View File

@ -93,7 +93,9 @@ public:
inline bool full(uint8_t cmdCount=1) const { return length > (BUFSIZE - cmdCount); }
inline bool empty() const { return length == 0; }
inline bool occupied() const { return length != 0; }
inline bool empty() const { return !occupied(); }
inline CommandLine& peek_next_command() { return commands[index_r]; }
@ -162,6 +164,11 @@ public:
*/
static void advance();
/**
* Run the entire queue in-place
*/
static void exhaust();
/**
* Add to the circular command queue the next command from:
* - The command-injection queue (injected_commands_P)

9
Marlin/src/lcd/extui/lib/dgus/DGUSScreenHandler.cpp
View File

@ -395,20 +395,23 @@ void DGUSScreenHandler::HandleTemperatureChanged(DGUS_VP_Variable &var, void *va
default: return;
#if HOTENDS >= 1
case VP_T_E0_Set:
NOMORE(newvalue, HEATER_0_MAXTEMP);
thermalManager.setTargetHotend(newvalue, 0);
acceptedvalue = thermalManager.temp_hotend[0].target;
acceptedvalue = thermalManager.degTargetHotend(0);
break;
#endif
#if HOTENDS >= 2
case VP_T_E1_Set:
NOMORE(newvalue, HEATER_1_MAXTEMP);
thermalManager.setTargetHotend(newvalue, 1);
acceptedvalue = thermalManager.temp_hotend[1].target;
acceptedvalue = thermalManager.degTargetHotend(1);
break;
#endif
#if HAS_HEATED_BED
case VP_T_Bed_Set:
NOMORE(newvalue, BED_MAXTEMP);
thermalManager.setTargetBed(newvalue);
acceptedvalue = thermalManager.temp_bed.target;
acceptedvalue = thermalManager.degTargetBed();
break;
#endif
}

2
Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.cpp
View File

@ -75,7 +75,7 @@ uint16_t z_park_pos = 10;
xyz_pos_t position_before_pause;
void MKS_pause_print_move() {
planner.synchronize();
queue.exhaust();
position_before_pause = current_position;
do_blocking_move_to(X_MIN_POS + x_park_pos, Y_MIN_POS + y_park_pos, current_position.z + z_park_pos);
}

6
Marlin/src/lcd/extui/lib/dgus/mks/DGUSDisplayDef.h
View File

@ -23,10 +23,10 @@
#include "../DGUSDisplayDef.h"
//#define USE_MKS_GREEN_UI
#define USE_MKS_GREEN_UI
//#define DGUS_MKS_RUNOUT_SENSOR
#define LOGO_TIME_DELAY TERN(USE_MKS_GREEN_UI, 5000, 1500)
#define LOGO_TIME_DELAY TERN(USE_MKS_GREEN_UI, 8000, 1500)
#if ENABLED(DGUS_MKS_RUNOUT_SENSOR)
#define MT_DET_1_PIN 1
@ -178,7 +178,7 @@ enum DGUSLCD_Screens : uint8_t {
MKSLCD_SCREEN_PRINT_CONFIG = 72,
MKSLCD_SCREEN_LEVEL_DATA = 106,
MKSLCD_PrintPause_SET = 107,
//MKSLCD_FILAMENT_DATA = 50,
MKSLCD_FILAMENT_DATA = 50,
MKSLCD_ABOUT = 83,
MKSLCD_PID = 108,
MKSLCD_PAUSE_SETTING_MOVE = 98,

48
Marlin/src/lcd/extui/lib/dgus/mks/DGUSScreenHandler.cpp
View File

@ -39,6 +39,7 @@
#include "../../../../../gcode/gcode.h"
#include "../../../../../pins/pins.h"
#include "../../../../../libs/nozzle.h"
#if ENABLED(HAS_STEALTHCHOP)
#include "../../../../../module/stepper/trinamic.h"
#include "../../../../../module/stepper/indirection.h"
@ -60,7 +61,6 @@ uint8_t DGUSLanguageSwitch = 0; // Switch language for MKS DGUS
uint32_t swap32(const uint32_t value) { return (value & 0x000000FFU) << 24U | (value & 0x0000FF00U) << 8U | (value & 0x00FF0000U) >> 8U | (value & 0xFF000000U) >> 24U; }
#if 0
void DGUSScreenHandler::sendinfoscreen_ch_mks(const uint16_t* line1, const uint16_t* line2, const uint16_t* line3, const uint16_t* line4) {
dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true);
@ -264,7 +264,7 @@ void DGUSScreenHandler::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) {
void DGUSScreenHandler::SDPrintingFinished() {
if (DGUSAutoTurnOff) {
while (!queue.ring_buffer.empty()) queue.advance();
queue.exhaust();
gcode.process_subcommands_now_P(PSTR("M81"));
}
GotoScreen(MKSLCD_SCREEN_PrintDone);
@ -465,7 +465,6 @@ void DGUSScreenHandler::Level_Ctrl_MKS(DGUS_VP_Variable &var, void *val_ptr) {
cs = getCurrentScreen();
if (cs != MKSLCD_AUTO_LEVEL) GotoScreen(MKSLCD_AUTO_LEVEL);
#else
GotoScreen(MKSLCD_SCREEN_LEVEL);
@ -499,14 +498,15 @@ void DGUSScreenHandler::MeshLevel(DGUS_VP_Variable &var, void *val_ptr) {
char cmd_buf[30];
float offset = mesh_adj_distance;
int16_t integer, Deci, Deci2;
// float f3 = current_position.z;
// float f4 = current_position.z;
if (!queue.ring_buffer.empty()) return;
switch (mesh_value) {
case 0:
offset = mesh_adj_distance;
integer = offset; // get int
Deci = (offset * 100);
Deci = Deci % 100;
Deci = (offset * 10);
Deci = Deci % 10;
Deci2 = offset * 100;
Deci2 = Deci2 % 10;
soft_endstop._enabled = false;
@ -520,8 +520,8 @@ void DGUSScreenHandler::MeshLevel(DGUS_VP_Variable &var, void *val_ptr) {
case 1:
offset = mesh_adj_distance;
integer = offset; // get int
Deci = (offset * 100);
Deci = Deci % 100;
Deci = (offset * 10);
Deci = Deci % 10;
Deci2 = offset * 100;
Deci2 = Deci2 % 10;
soft_endstop._enabled = false;
@ -589,8 +589,8 @@ void DGUSScreenHandler::LCD_BLK_Adjust(DGUS_VP_Variable &var, void *val_ptr) {
uint16_t lcd_value = swap16(*(uint16_t *)val_ptr);
if(lcd_value > 100) lcd_value = 100;
else if(lcd_value < 10) lcd_value = 10;
if (lcd_value > 100) lcd_value = 100;
else if (lcd_value < 10) lcd_value = 10;
lcd_default_light = lcd_value;
@ -794,7 +794,7 @@ void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPAIR("QUEUE LEN:", queue.length);
if (!print_job_timer.isPaused() && queue.ring_buffer.full(1))
if (!print_job_timer.isPaused() && !queue.ring_buffer.empty())
return;
char axiscode;
@ -1249,8 +1249,8 @@ void DGUSScreenHandler::MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr) {
switch (val_t) {
case 0:
#if HOTENDS >= 1
if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
if (thermalManager.degHotend(0) < thermalManager.extrude_min_temp) {
if (thermalManager.degTargetHotend(0) < thermalManager.extrude_min_temp)
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0);
sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);
@ -1268,8 +1268,8 @@ void DGUSScreenHandler::MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr) {
case 1:
#if HOTENDS >= 2
if (thermalManager.temp_hotend[1].celsius < thermalManager.extrude_min_temp) {
if (thermalManager.temp_hotend[1].target < thermalManager.extrude_min_temp)
if (thermalManager.degHotend(1) < thermalManager.extrude_min_temp) {
if (thermalManager.degTargetHotend(1) < thermalManager.extrude_min_temp)
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 1);
sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);
@ -1284,8 +1284,8 @@ void DGUSScreenHandler::MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr) {
}
#endif
#if ENABLED(SINGLENOZZLE)
if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
if (thermalManager.degHotend(0) < thermalManager.extrude_min_temp) {
if (thermalManager.degTargetHotend(0) < thermalManager.extrude_min_temp)
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0);
sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);
@ -1313,8 +1313,8 @@ void DGUSScreenHandler::MKS_FilamentUnLoad(DGUS_VP_Variable &var, void *val_ptr)
switch (val_t) {
case 0:
#if HOTENDS >= 1
if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
if (thermalManager.degHotend(0) < thermalManager.extrude_min_temp) {
if (thermalManager.degTargetHotend(0) < thermalManager.extrude_min_temp)
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0);
sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);
@ -1331,8 +1331,8 @@ void DGUSScreenHandler::MKS_FilamentUnLoad(DGUS_VP_Variable &var, void *val_ptr)
break;
case 1:
#if HOTENDS >= 2
if (thermalManager.temp_hotend[1].celsius < thermalManager.extrude_min_temp) {
if (thermalManager.temp_hotend[1].target < thermalManager.extrude_min_temp)
if (thermalManager.degHotend(1) < thermalManager.extrude_min_temp) {
if (thermalManager.degTargetHotend(1) < thermalManager.extrude_min_temp)
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 1);
sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);
@ -1348,8 +1348,8 @@ void DGUSScreenHandler::MKS_FilamentUnLoad(DGUS_VP_Variable &var, void *val_ptr)
#endif
#if ENABLED(SINGLENOZZLE)
if (thermalManager.temp_hotend[0].celsius < thermalManager.extrude_min_temp) {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
if (thermalManager.degHotend(0) < thermalManager.extrude_min_temp) {
if (thermalManager.degTargetHotend(0) < thermalManager.extrude_min_temp)
thermalManager.setTargetHotend(thermalManager.extrude_min_temp, 0);
sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);

22
Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp
View File

@ -191,7 +191,7 @@ static void btn_cancel_event_cb(lv_obj_t *btn, lv_event_t event) {
TERN_(ADVANCED_PAUSE_FEATURE, pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT);
}
else if (DIALOG_IS(TYPE_FILAMENT_LOAD_HEAT, TYPE_FILAMENT_UNLOAD_HEAT, TYPE_FILAMENT_HEAT_LOAD_COMPLETED, TYPE_FILAMENT_HEAT_UNLOAD_COMPLETED)) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target= uiCfg.desireSprayerTempBak;
thermalManager.setTargetHotend(uiCfg.hotendTargetTempBak, uiCfg.extruderIndex);
clear_cur_ui();
draw_return_ui();
}
@ -204,7 +204,7 @@ static void btn_cancel_event_cb(lv_obj_t *btn, lv_event_t event) {
uiCfg.filament_loading_time_cnt = 0;
uiCfg.filament_unloading_time_flg = false;
uiCfg.filament_unloading_time_cnt = 0;
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = uiCfg.desireSprayerTempBak;
thermalManager.setTargetHotend(uiCfg.hotendTargetTempBak, uiCfg.extruderIndex);
clear_cur_ui();
draw_return_ui();
}
@ -479,9 +479,9 @@ void lv_draw_dialog(uint8_t type) {
void filament_sprayer_temp() {
char buf[20] = {0};
sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
strcpy(public_buf_l, uiCfg.curSprayerChoose < 1 ? extrude_menu.ext1 : extrude_menu.ext2);
strcpy(public_buf_l, uiCfg.extruderIndex < 1 ? extrude_menu.ext1 : extrude_menu.ext2);
strcat_P(public_buf_l, PSTR(": "));
strcat(public_buf_l, buf);
lv_label_set_text(tempText1, public_buf_l);
@ -500,7 +500,7 @@ void filament_dialog_handle() {
planner.synchronize();
uiCfg.filament_loading_time_flg = true;
uiCfg.filament_loading_time_cnt = 0;
sprintf_P(public_buf_m, PSTR("T%d\nG91\nG1 E%d F%d\nG90"), uiCfg.curSprayerChoose, gCfgItems.filamentchange_load_length, gCfgItems.filamentchange_load_speed);
sprintf_P(public_buf_m, PSTR("T%d\nG91\nG1 E%d F%d\nG90"), uiCfg.extruderIndex, gCfgItems.filamentchange_load_length, gCfgItems.filamentchange_load_speed);
queue.inject(public_buf_m);
}
if (uiCfg.filament_heat_completed_unload) {
@ -510,13 +510,13 @@ void filament_dialog_handle() {
planner.synchronize();
uiCfg.filament_unloading_time_flg = true;
uiCfg.filament_unloading_time_cnt = 0;
sprintf_P(public_buf_m, PSTR("T%d\nG91\nG1 E-%d F%d\nG90"), uiCfg.curSprayerChoose, gCfgItems.filamentchange_unload_length, gCfgItems.filamentchange_unload_speed);
sprintf_P(public_buf_m, PSTR("T%d\nG91\nG1 E-%d F%d\nG90"), uiCfg.extruderIndex, gCfgItems.filamentchange_unload_length, gCfgItems.filamentchange_unload_speed);
queue.inject(public_buf_m);
}
if (((abs((int)((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius - gCfgItems.filament_limit_temper)) <= 1)
|| ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius > gCfgItems.filament_limit_temper))
&& (uiCfg.filament_load_heat_flg)
if ( ((abs((int)((int)thermalManager.degHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temper)) <= 1)
|| ((int)thermalManager.degHotend(uiCfg.extruderIndex) > gCfgItems.filament_limit_temper))
&& uiCfg.filament_load_heat_flg
) {
uiCfg.filament_load_heat_flg = false;
lv_clear_dialog();
@ -529,8 +529,8 @@ void filament_dialog_handle() {
lv_clear_dialog();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_LOAD_COMPLETED);
}
if (((abs((int)((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius - gCfgItems.filament_limit_temper)) <= 1)
|| ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius > gCfgItems.filament_limit_temper))
if (((abs((int)((int)thermalManager.degHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temper)) <= 1)
|| ((int)thermalManager.degHotend(uiCfg.extruderIndex) > gCfgItems.filament_limit_temper))
&& uiCfg.filament_unload_heat_flg
) {
uiCfg.filament_unload_heat_flg = false;

18
Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.cpp
View File

@ -54,7 +54,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
if (event != LV_EVENT_RELEASED) return;
switch (obj->mks_obj_id) {
case ID_E_ADD:
if (thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius >= EXTRUDE_MINTEMP) {
if (thermalManager.degHotend(uiCfg.extruderIndex) >= EXTRUDE_MINTEMP) {
sprintf_P((char *)public_buf_l, PSTR("G91\nG1 E%d F%d\nG90"), uiCfg.extruStep, 60 * uiCfg.extruSpeed);
queue.inject(public_buf_l);
extrudeAmount += uiCfg.extruStep;
@ -62,7 +62,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
}
break;
case ID_E_DEC:
if (thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius >= EXTRUDE_MINTEMP) {
if (thermalManager.degHotend(uiCfg.extruderIndex) >= EXTRUDE_MINTEMP) {
sprintf_P((char *)public_buf_l, PSTR("G91\nG1 E%d F%d\nG90"), 0 - uiCfg.extruStep, 60 * uiCfg.extruSpeed);
queue.enqueue_one_now(public_buf_l);
extrudeAmount -= uiCfg.extruStep;
@ -71,17 +71,17 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
break;
case ID_E_TYPE:
if (ENABLED(HAS_MULTI_EXTRUDER)) {
if (uiCfg.curSprayerChoose == 0) {
uiCfg.curSprayerChoose = 1;
if (uiCfg.extruderIndex == 0) {
uiCfg.extruderIndex = 1;
queue.inject_P(PSTR("T1"));
}
else {
uiCfg.curSprayerChoose = 0;
uiCfg.extruderIndex = 0;
queue.inject_P(PSTR("T0"));
}
}
else
uiCfg.curSprayerChoose = 0;
uiCfg.extruderIndex = 0;
extrudeAmount = 0;
disp_hotend_temp();
@ -153,7 +153,7 @@ void lv_draw_extrusion() {
}
void disp_ext_type() {
if (uiCfg.curSprayerChoose == 1) {
if (uiCfg.extruderIndex == 1) {
lv_imgbtn_set_src_both(buttonType, "F:/bmp_extru2.bin");
if (gCfgItems.multiple_language) {
lv_label_set_text(labelType, extrude_menu.ext2);
@ -195,7 +195,7 @@ void disp_ext_speed() {
void disp_hotend_temp() {
char buf[20] = {0};
sprintf(buf, extrude_menu.temp_value, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target);
sprintf(buf, extrude_menu.temp_value, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
strcpy(public_buf_l, extrude_menu.temper_text);
strcat(public_buf_l, buf);
lv_label_set_text(tempText, public_buf_l);
@ -213,7 +213,7 @@ void disp_extru_amount() {
sprintf(buf1, extrude_menu.count_value_cm, extrudeAmount / 10);
else
sprintf(buf1, extrude_menu.count_value_m, extrudeAmount / 1000);
strcat(public_buf_l, uiCfg.curSprayerChoose < 1 ? extrude_menu.ext1 : extrude_menu.ext2);
strcat(public_buf_l, uiCfg.extruderIndex == 0 ? extrude_menu.ext1 : extrude_menu.ext2);
strcat(public_buf_l, buf1);
lv_label_set_text(ExtruText, public_buf_l);

34
Marlin/src/lcd/extui/lib/mks_ui/draw_filament_change.cpp
View File

@ -50,25 +50,25 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
switch (obj->mks_obj_id) {
case ID_FILAMNT_IN:
uiCfg.filament_load_heat_flg = true;
if ((abs(thermalManager.temp_hotend[uiCfg.curSprayerChoose].target - thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius) <= 1)
|| (gCfgItems.filament_limit_temper <= thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius)) {
if ((abs(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.degHotend(uiCfg.extruderIndex)) <= 1)
|| (gCfgItems.filament_limit_temper <= thermalManager.degHotend(uiCfg.extruderIndex))) {
lv_clear_filament_change();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED);
}
else {
lv_clear_filament_change();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_LOAD_HEAT);
if (thermalManager.temp_hotend[uiCfg.curSprayerChoose].target < gCfgItems.filament_limit_temper) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = gCfgItems.filament_limit_temper;
thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
if (thermalManager.degTargetHotend(uiCfg.extruderIndex) < gCfgItems.filament_limit_temper) {
thermalManager.setTargetHotend(gCfgItems.filament_limit_temper, uiCfg.extruderIndex);
thermalManager.start_watching_hotend(uiCfg.extruderIndex);
}
}
break;
case ID_FILAMNT_OUT:
uiCfg.filament_unload_heat_flg = true;
if ((thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > 0)
&& ((abs((int)((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target - thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius)) <= 1)
|| ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius >= gCfgItems.filament_limit_temper))
if (thermalManager.degTargetHotend(uiCfg.extruderIndex)
&& ((abs((int)((int)thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.degHotend(uiCfg.extruderIndex))) <= 1)
|| ((int)thermalManager.degHotend(uiCfg.extruderIndex) >= gCfgItems.filament_limit_temper))
) {
lv_clear_filament_change();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_UNLOAD_COMPLETED);
@ -76,28 +76,28 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
else {
lv_clear_filament_change();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_UNLOAD_HEAT);
if (thermalManager.temp_hotend[uiCfg.curSprayerChoose].target < gCfgItems.filament_limit_temper) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = gCfgItems.filament_limit_temper;
thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
if (thermalManager.degTargetHotend(uiCfg.extruderIndex) < gCfgItems.filament_limit_temper) {
thermalManager.setTargetHotend(gCfgItems.filament_limit_temper, uiCfg.extruderIndex);
thermalManager.start_watching_hotend(uiCfg.extruderIndex);
}
filament_sprayer_temp();
}
break;
case ID_FILAMNT_TYPE:
#if HAS_MULTI_EXTRUDER
uiCfg.curSprayerChoose = !uiCfg.curSprayerChoose;
uiCfg.extruderIndex = !uiCfg.extruderIndex;
#endif
disp_filament_type();
break;
case ID_FILAMNT_RETURN:
#if HAS_MULTI_EXTRUDER
if (uiCfg.print_state != IDLE && uiCfg.print_state != REPRINTED)
gcode.process_subcommands_now_P(uiCfg.curSprayerChoose_bak == 1 ? PSTR("T1") : PSTR("T0"));
gcode.process_subcommands_now_P(uiCfg.extruderIndexBak == 1 ? PSTR("T1") : PSTR("T0"));
#endif
feedrate_mm_s = (float)uiCfg.moveSpeed_bak;
if (uiCfg.print_state == PAUSED)
planner.set_e_position_mm((destination.e = current_position.e = uiCfg.current_e_position_bak));
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = uiCfg.desireSprayerTempBak;
thermalManager.setTargetHotend(uiCfg.hotendTargetTempBak, uiCfg.extruderIndex);
clear_cur_ui();
draw_return_ui();
@ -132,7 +132,7 @@ void lv_draw_filament_change() {
}
void disp_filament_type() {
if (uiCfg.curSprayerChoose == 1) {
if (uiCfg.extruderIndex == 1) {
lv_imgbtn_set_src_both(buttonType, "F:/bmp_extru2.bin");
if (gCfgItems.multiple_language) {
lv_label_set_text(labelType, preheat_menu.ext2);
@ -153,8 +153,8 @@ void disp_filament_temp() {
public_buf_l[0] = '\0';
strcat(public_buf_l, uiCfg.curSprayerChoose < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target);
strcat(public_buf_l, uiCfg.extruderIndex < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
strcat_P(public_buf_l, PSTR(": "));
strcat(public_buf_l, buf);

4
Marlin/src/lcd/extui/lib/mks_ui/draw_operation.cpp
View File

@ -66,7 +66,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
break;
case ID_O_FILAMENT:
#if HAS_MULTI_EXTRUDER
uiCfg.curSprayerChoose_bak = active_extruder;
uiCfg.extruderIndexBak = active_extruder;
#endif
if (uiCfg.print_state == WORKING) {
#if ENABLED(SDSUPPORT)
@ -76,7 +76,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
#endif
}
uiCfg.moveSpeed_bak = (uint16_t)feedrate_mm_s;
uiCfg.desireSprayerTempBak = thermalManager.temp_hotend[active_extruder].target;
uiCfg.hotendTargetTempBak = thermalManager.degTargetHotend(active_extruder);
lv_clear_operation();
lv_draw_filament_change();
break;

65
Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.cpp
View File

@ -48,47 +48,46 @@ enum {
static void event_handler(lv_obj_t *obj, lv_event_t event) {
if (event != LV_EVENT_RELEASED) return;
switch (obj->mks_obj_id) {
case ID_P_ADD:
case ID_P_ADD: {
if (uiCfg.curTempType == 0) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target += uiCfg.stepHeat;
if (uiCfg.curSprayerChoose == 0) {
if ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > (HEATER_0_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1))) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = (float)HEATER_0_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1);
}
}
int16_t max_target;
thermalManager.temp_hotend[uiCfg.extruderIndex].target += uiCfg.stepHeat;
if (uiCfg.extruderIndex == 0)
max_target = HEATER_0_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1);
#if HAS_MULTI_HOTEND
else if ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > (HEATER_1_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1))) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = (float)HEATER_1_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1);
}
else
max_target = HEATER_1_MAXTEMP - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1);
#endif
thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
if (thermalManager.degTargetHotend(uiCfg.extruderIndex) > max_target)
thermalManager.setTargetHotend(max_target, uiCfg.extruderIndex);
thermalManager.start_watching_hotend(uiCfg.extruderIndex);
}
#if HAS_HEATED_BED
else {
constexpr int16_t max_target = BED_MAXTEMP - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1);
thermalManager.temp_bed.target += uiCfg.stepHeat;
if ((int)thermalManager.temp_bed.target > BED_MAXTEMP - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1)) {
thermalManager.temp_bed.target = (float)BED_MAXTEMP - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1);
}
if (thermalManager.degTargetBed() > max_target)
thermalManager.setTargetBed(max_target);
thermalManager.start_watching_bed();
}
#endif
disp_desire_temp();
break;
} break;
case ID_P_DEC:
if (uiCfg.curTempType == 0) {
if ((int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target > uiCfg.stepHeat)
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target -= uiCfg.stepHeat;
if ((int)thermalManager.degTargetHotend(uiCfg.extruderIndex) > uiCfg.stepHeat)
thermalManager.temp_hotend[uiCfg.extruderIndex].target -= uiCfg.stepHeat;
else
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = 0;
thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
thermalManager.setTargetHotend(0, uiCfg.extruderIndex);
thermalManager.start_watching_hotend(uiCfg.extruderIndex);
}
#if HAS_HEATED_BED
else {
if ((int)thermalManager.temp_bed.target > uiCfg.stepHeat)
thermalManager.temp_bed.target -= uiCfg.stepHeat;
else
thermalManager.temp_bed.target = 0;
thermalManager.setTargetBed(0);
thermalManager.start_watching_bed();
}
@ -98,20 +97,20 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
case ID_P_TYPE:
if (uiCfg.curTempType == 0) {
if (ENABLED(HAS_MULTI_EXTRUDER)) {
if (uiCfg.curSprayerChoose == 0) {
uiCfg.curSprayerChoose = 1;
if (uiCfg.extruderIndex == 0) {
uiCfg.extruderIndex = 1;
}
else if (uiCfg.curSprayerChoose == 1) {
else if (uiCfg.extruderIndex == 1) {
if (TEMP_SENSOR_BED != 0) {
uiCfg.curTempType = 1;
}
else {
uiCfg.curTempType = 0;
uiCfg.curSprayerChoose = 0;
uiCfg.extruderIndex = 0;
}
}
}
else if (uiCfg.curSprayerChoose == 0) {
else if (uiCfg.extruderIndex == 0) {
if (TEMP_SENSOR_BED != 0)
uiCfg.curTempType = 1;
else
@ -119,7 +118,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
}
}
else if (uiCfg.curTempType == 1) {
uiCfg.curSprayerChoose = 0;
uiCfg.extruderIndex = 0;
uiCfg.curTempType = 0;
}
disp_temp_type();
@ -135,8 +134,8 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
break;
case ID_P_OFF:
if (uiCfg.curTempType == 0) {
thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = 0;
thermalManager.start_watching_hotend(uiCfg.curSprayerChoose);
thermalManager.setTargetHotend(0, uiCfg.extruderIndex);
thermalManager.start_watching_hotend(uiCfg.extruderIndex);
}
#if HAS_HEATED_BED
else {
@ -186,7 +185,7 @@ void lv_draw_preHeat() {
void disp_temp_type() {
if (uiCfg.curTempType == 0) {
if (uiCfg.curSprayerChoose == 1) {
if (uiCfg.extruderIndex == 1) {
lv_imgbtn_set_src_both(buttonType, "F:/bmp_extru2.bin");
if (gCfgItems.multiple_language) {
lv_label_set_text(labelType, preheat_menu.ext2);
@ -217,13 +216,13 @@ void disp_desire_temp() {
public_buf_l[0] = '\0';
if (uiCfg.curTempType == 0) {
strcat(public_buf_l, uiCfg.curSprayerChoose < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].celsius, (int)thermalManager.temp_hotend[uiCfg.curSprayerChoose].target);
strcat(public_buf_l, uiCfg.extruderIndex < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
}
#if HAS_HEATED_BED
else {
strcat(public_buf_l, preheat_menu.hotbed);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_bed.celsius, (int)thermalManager.temp_bed.target);
sprintf(buf, preheat_menu.value_state, (int)thermalManager.temp_bed.celsius, (int)thermalManager.temp_bed.target);
}
#endif
strcat_P(public_buf_l, PSTR(": "));

4
Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp
View File

@ -203,11 +203,11 @@ void lv_draw_printing() {
}
void disp_ext_temp() {
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.temp_hotend[0].celsius, (int)thermalManager.temp_hotend[0].target);
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.degHotend(0), (int)thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1, public_buf_l);
#if HAS_MULTI_EXTRUDER
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.temp_hotend[1].celsius, (int)thermalManager.temp_hotend[1].target);
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.degHotend(1), (int)thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2, public_buf_l);
#endif
}

8
Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp
View File

@ -98,10 +98,10 @@ void disp_det_error() {
lv_obj_t *e1, *e2, *e3, *bed;
void mks_disp_test() {
char buf[30] = {0};
sprintf_P(buf, PSTR("e1:%d"), (int)thermalManager.temp_hotend[0].celsius);
sprintf_P(buf, PSTR("e1:%d"), (int)thermalManager.degHotend(0));
lv_label_set_text(e1, buf);
#if HAS_MULTI_HOTEND
sprintf_P(buf, PSTR("e2:%d"), (int)thermalManager.temp_hotend[1].celsius);
sprintf_P(buf, PSTR("e2:%d"), (int)thermalManager.degHotend(1));
lv_label_set_text(e2, buf);
#endif
#if HAS_HEATED_BED
@ -133,12 +133,12 @@ void lv_draw_ready_print() {
#if 1
e1 = lv_label_create_empty(scr);
lv_obj_set_pos(e1, 20, 20);
sprintf_P(buf, PSTR("e1: %d"), (int)thermalManager.temp_hotend[0].celsius);
sprintf_P(buf, PSTR("e1: %d"), (int)thermalManager.degHotend(0));
lv_label_set_text(e1, buf);
#if HAS_MULTI_HOTEND
e2 = lv_label_create_empty(scr);
lv_obj_set_pos(e2, 20, 45);
sprintf_P(buf, PSTR("e1: %d"), (int)thermalManager.temp_hotend[1].celsius);
sprintf_P(buf, PSTR("e1: %d"), (int)thermalManager.degHotend(1));
lv_label_set_text(e2, buf);
#endif

2
Marlin/src/lcd/extui/lib/mks_ui/draw_tool.cpp
View File

@ -68,7 +68,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
#endif
break;
case ID_T_FILAMENT:
uiCfg.desireSprayerTempBak = thermalManager.temp_hotend[uiCfg.curSprayerChoose].target;
uiCfg.hotendTargetTempBak = thermalManager.degTargetHotend(uiCfg.extruderIndex);
lv_draw_filament_change();
break;
case ID_T_MORE:

2
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
View File

@ -179,7 +179,7 @@ void gCfgItems_init() {
void ui_cfg_init() {
uiCfg.curTempType = 0;
uiCfg.curSprayerChoose = 0;
uiCfg.extruderIndex = 0;
uiCfg.stepHeat = 10;
uiCfg.leveling_first_time = false;
uiCfg.para_ui_page = false;

6
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h
View File

@ -211,9 +211,9 @@ typedef struct {
typedef struct {
uint8_t curTempType:1,
curSprayerChoose:3,
extruderIndex:3,
stepHeat:4,
curSprayerChoose_bak:4;
extruderIndexBak:4;
bool leveling_first_time:1,
para_ui_page:1,
configWifi:1,
@ -246,7 +246,7 @@ typedef struct {
filament_loading_time_cnt,
filament_unloading_time_cnt;
float move_dist;
float desireSprayerTempBak;
float hotendTargetTempBak;
float current_x_position_bak,
current_y_position_bak,
current_z_position_bak,

14
Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp
View File

@ -885,9 +885,9 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
char *outBuf = (char *)tempBuf;
char str_1[16], tbuf[34];
dtostrf(thermalManager.temp_hotend[0].celsius, 1, 1, tbuf);
dtostrf(thermalManager.degHotend(0), 1, 1, tbuf);
strcat_P(tbuf, PSTR(" /"));
strcat(tbuf, dtostrf(thermalManager.temp_hotend[0].target, 1, 1, str_1));
strcat(tbuf, dtostrf(thermalManager.degTargetHotend(0), 1, 1, str_1));
const int tlen = strlen(tbuf);
@ -912,9 +912,9 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
strcat_P(outBuf, PSTR(" T1:"));
outBuf += 4;
#if HAS_MULTI_HOTEND
strcat(outBuf, dtostrf(thermalManager.temp_hotend[1].celsius, 1, 1, str_1));
strcat(outBuf, dtostrf(thermalManager.degHotend(1), 1, 1, str_1));
strcat_P(outBuf, PSTR(" /"));
strcat(outBuf, dtostrf(thermalManager.temp_hotend[1].target, 1, 1, str_1));
strcat(outBuf, dtostrf(thermalManager.degTargetHotend(1), 1, 1, str_1));
#else
strcat_P(outBuf, PSTR("0 /0"));
#endif
@ -924,15 +924,15 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
}
else {
sprintf_P((char *)tempBuf, PSTR("T:%d /%d B:%d /%d T0:%d /%d T1:%d /%d @:0 B@:0\r\n"),
(int)thermalManager.temp_hotend[0].celsius, (int)thermalManager.temp_hotend[0].target,
(int)thermalManager.degHotend(0), (int)thermalManager.degTargetHotend(0),
#if HAS_HEATED_BED
(int)thermalManager.temp_bed.celsius, (int)thermalManager.temp_bed.target,
#else
0, 0,
#endif
(int)thermalManager.temp_hotend[0].celsius, (int)thermalManager.temp_hotend[0].target,
(int)thermalManager.degHotend(0), (int)thermalManager.degTargetHotend(0),
#if HAS_MULTI_HOTEND
(int)thermalManager.temp_hotend[1].celsius, (int)thermalManager.temp_hotend[1].target
(int)thermalManager.degHotend(1), (int)thermalManager.degTargetHotend(1)
#else
0, 0
#endif