bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Use serial shorthand

Browse Source
This commit is contained in:
Scott Lahteine 2021-02-04 23:22:42 -06:00 committed by Scott Lahteine
parent bb5c643dfb
commit 582458998f
21 changed files with 88 additions and 132 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Marlin/src/MarlinCore.cpp
View File

@ -419,8 +419,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
if (parked_or_ignoring) gcode.reset_stepper_timeout(ms);
if (gcode.stepper_max_timed_out(ms)) {
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR(STR_KILL_INACTIVE_TIME, parser.command_ptr);
SERIAL_ERROR_MSG(STR_KILL_INACTIVE_TIME, parser.command_ptr);
kill();
}

9
Marlin/src/feature/binary_stream.h
View File

@ -352,8 +352,7 @@ public:
}
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Packet header(", packet.header.sync, "?) corrupt");
SERIAL_ECHO_MSG("Packet header(", packet.header.sync, "?) corrupt");
stream_state = StreamState::PACKET_RESEND;
}
}
@ -387,8 +386,7 @@ public:
stream_state = StreamState::PACKET_PROCESS;
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Packet(", packet.header.sync, ") payload corrupt");
SERIAL_ECHO_MSG("Packet(", packet.header.sync, ") payload corrupt");
stream_state = StreamState::PACKET_RESEND;
}
}
@ -406,8 +404,7 @@ public:
if (packet_retries < MAX_RETRIES || MAX_RETRIES == 0) {
packet_retries++;
stream_state = StreamState::PACKET_RESET;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Resend request ", int(packet_retries));
SERIAL_ECHO_MSG("Resend request ", int(packet_retries));
SERIAL_ECHOLNPAIR("rs", sync);
}
else

3
Marlin/src/feature/cancel_object.cpp
View File

@ -67,8 +67,7 @@ void CancelObject::uncancel_object(const int8_t obj) {
void CancelObject::report() {
if (active_object >= 0) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Active Object: ", int(active_object));
SERIAL_ECHO_MSG("Active Object: ", int(active_object));
}
if (canceled) {

9
Marlin/src/feature/mmu/mmu2.cpp
View File

@ -514,8 +514,7 @@ static void mmu2_not_responding() {
extruder = index; // filament change is finished
active_extruder = 0;
ENABLE_AXIS_E0();
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_ACTIVE_EXTRUDER, int(extruder));
SERIAL_ECHO_MSG(STR_ACTIVE_EXTRUDER, int(extruder));
}
ui.reset_status();
}
@ -602,8 +601,7 @@ static void mmu2_not_responding() {
active_extruder = 0;
ENABLE_AXIS_E0();
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_ACTIVE_EXTRUDER, int(extruder));
SERIAL_ECHO_MSG(STR_ACTIVE_EXTRUDER, int(extruder));
ui.reset_status();
}
@ -698,8 +696,7 @@ static void mmu2_not_responding() {
extruder = index; //filament change is finished
active_extruder = 0;
ENABLE_AXIS_E0();
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_ACTIVE_EXTRUDER, int(extruder));
SERIAL_ECHO_MSG(STR_ACTIVE_EXTRUDER, int(extruder));
ui.reset_status();
}

12
Marlin/src/gcode/bedlevel/mbl/G29.cpp
View File

@ -142,8 +142,7 @@ void GcodeSuite::G29() {
if (parser.seenval('I')) {
ix = parser.value_int();
if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1)) {
SERIAL_ECHOPAIR("I out of range (0-", int(GRID_MAX_POINTS_X - 1));
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("I out of range (0-", int(GRID_MAX_POINTS_X - 1), ")");
return;
}
}
@ -153,8 +152,7 @@ void GcodeSuite::G29() {
if (parser.seenval('J')) {
iy = parser.value_int();
if (!WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_ECHOPAIR("J out of range (0-", int(GRID_MAX_POINTS_Y - 1));
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("J out of range (0-", int(GRID_MAX_POINTS_Y - 1), ")");
return;
}
}
@ -182,10 +180,8 @@ void GcodeSuite::G29() {
} // switch(state)
if (state == MeshNext) {
SERIAL_ECHOPAIR("MBL G29 point ", _MIN(mbl_probe_index, GRID_MAX_POINTS));
SERIAL_ECHOLNPAIR(" of ", int(GRID_MAX_POINTS));
}
if (state == MeshNext)
SERIAL_ECHOLNPAIR("MBL G29 point ", _MIN(mbl_probe_index, GRID_MAX_POINTS), " of ", int(GRID_MAX_POINTS));
report_current_position();
}

16
Marlin/src/gcode/config/M281.cpp
View File

@ -34,7 +34,9 @@
* U<angle> - Stowed Angle
*/
void GcodeSuite::M281() {
if (!parser.seenval('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
#if ENABLED(BLTOUCH)
@ -53,16 +55,14 @@ void GcodeSuite::M281() {
angle_change = true;
}
if (!angle_change) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Servo ", servo_index,
" L", servo_angles[servo_index][0],
" U", servo_angles[servo_index][1]);
SERIAL_ECHO_MSG(" Servo ", servo_index,
" L", servo_angles[servo_index][0],
" U", servo_angles[servo_index][1]);
}
}
else {
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR("Servo ", servo_index, " out of range");
}
else
SERIAL_ERROR_MSG("Servo ", servo_index, " out of range");
}
#endif // EDITABLE_SERVO_ANGLES

9
Marlin/src/gcode/config/M304.cpp
View File

@ -35,14 +35,15 @@
* D<dval> - Set the D value
*/
void GcodeSuite::M304() {
if (parser.seen('P')) thermalManager.temp_bed.pid.Kp = parser.value_float();
if (parser.seen('I')) thermalManager.temp_bed.pid.Ki = scalePID_i(parser.value_float());
if (parser.seen('D')) thermalManager.temp_bed.pid.Kd = scalePID_d(parser.value_float());
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" p:", thermalManager.temp_bed.pid.Kp,
" i:", unscalePID_i(thermalManager.temp_bed.pid.Ki),
" d:", unscalePID_d(thermalManager.temp_bed.pid.Kd));
SERIAL_ECHO_MSG(" p:", thermalManager.temp_bed.pid.Kp,
" i:", unscalePID_i(thermalManager.temp_bed.pid.Ki),
" d:", unscalePID_d(thermalManager.temp_bed.pid.Kd));
}
#endif // PIDTEMPBED

6
Marlin/src/gcode/config/M305.cpp
View File

@ -49,10 +49,8 @@ void GcodeSuite::M305() {
const bool do_set = parser.seen("BCRT");
// A valid P index is required
if (t_index >= (USER_THERMISTORS) || (do_set && t_index < 0)) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("!Invalid index. (0 <= P <= ", int(USER_THERMISTORS - 1), ")");
}
if (t_index >= (USER_THERMISTORS) || (do_set && t_index < 0))
SERIAL_ECHO_MSG("!Invalid index. (0 <= P <= ", int(USER_THERMISTORS - 1), ")");
else if (do_set) {
if (parser.seen('R')) // Pullup resistor value
if (!thermalManager.set_pull_up_res(t_index, parser.value_float()))

15
Marlin/src/gcode/control/M280.cpp
View File

@ -31,7 +31,9 @@
* M280: Get or set servo position. P<index> [S<angle>]
*/
void GcodeSuite::M280() {
if (!parser.seen('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
if (parser.seen('S')) {
@ -41,15 +43,12 @@ void GcodeSuite::M280() {
else
MOVE_SERVO(servo_index, a);
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Servo ", servo_index, ": ", servo[servo_index].read());
}
}
else {
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR("Servo ", servo_index, " out of range");
else
SERIAL_ECHO_MSG(" Servo ", servo_index, ": ", servo[servo_index].read());
}
else
SERIAL_ERROR_MSG("Servo ", servo_index, " out of range");
}
#endif // HAS_SERVOS

8
Marlin/src/gcode/host/M113.cpp
View File

@ -32,14 +32,14 @@
* S<seconds> Optional. Set the keepalive interval.
*/
void GcodeSuite::M113() {
if (parser.seenval('S')) {
host_keepalive_interval = parser.value_byte();
NOMORE(host_keepalive_interval, 60);
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("M113 S", (unsigned long)host_keepalive_interval);
}
else
SERIAL_ECHO_MSG("M113 S", (uint16_t)host_keepalive_interval);
}
#endif // HOST_KEEPALIVE_FEATURE

6
Marlin/src/gcode/motion/M290.cpp
View File

@ -42,14 +42,12 @@
FORCE_INLINE void mod_probe_offset(const float &offs) {
if (TERN1(BABYSTEP_HOTEND_Z_OFFSET, active_extruder == 0)) {
probe.offset.z += offs;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_PROBE_OFFSET " " STR_Z, probe.offset.z);
SERIAL_ECHO_MSG(STR_PROBE_OFFSET " " STR_Z, probe.offset.z);
}
else {
#if ENABLED(BABYSTEP_HOTEND_Z_OFFSET)
hotend_offset[active_extruder].z -= offs;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_PROBE_OFFSET STR_Z ": ", hotend_offset[active_extruder].z);
SERIAL_ECHO_MSG(STR_PROBE_OFFSET STR_Z ": ", hotend_offset[active_extruder].z);
#endif
}
}

3
Marlin/src/gcode/stats/M31.cpp
View File

@ -35,6 +35,5 @@ void GcodeSuite::M31() {
ui.set_status(buffer);
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Print time: ", buffer);
SERIAL_ECHO_MSG("Print time: ", buffer);
}

6
Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View File

@ -552,10 +552,8 @@ void AnycubicTFTClass::GetCommandFromTFT() {
a_command = ((int)((strtod(&TFTcmdbuffer[TFTbufindw][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindw] + 1], nullptr))));
#if ENABLED(ANYCUBIC_LCD_DEBUG)
if ((a_command > 7) && (a_command != 20)) { // No debugging of status polls, please!
SERIAL_ECHOPGM("TFT Serial Command: ");
SERIAL_ECHOLN(TFTcmdbuffer[TFTbufindw]);
}
if ((a_command > 7) && (a_command != 20)) // No debugging of status polls, please!
SERIAL_ECHOLNPAIR("TFT Serial Command: ", TFTcmdbuffer[TFTbufindw]);
#endif
switch (a_command) {

17
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
View File

@ -1074,7 +1074,7 @@ void CLCD::init() {
uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C;
if (device_id == 0x7C) {
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_MSG("FTDI chip initialized ");
SERIAL_ECHO_MSG("FTDI chip initialized");
#endif
break;
}
@ -1082,11 +1082,10 @@ void CLCD::init() {
delay(1);
if (counter == 249) {
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Timeout waiting for device ID, should be 124, got ", device_id);
#endif
}
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_MSG("Timeout waiting for device ID, should be 124, got ", int(device_id));
#endif
}
}
/* make sure that all units are in working conditions, usually the touch-controller needs a little more time */
@ -1101,10 +1100,8 @@ void CLCD::init() {
else
delay(1);
if (ENABLED(TOUCH_UI_DEBUG) && counter == 99) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Timeout waiting for reset status. Should be 0x00, got ", reset_status);
}
if (ENABLED(TOUCH_UI_DEBUG) && counter == 99)
SERIAL_ECHO_MSG("Timeout waiting for reset status. Should be 0x00, got ", int(reset_status));
}
mem_write_8(REG::PWM_DUTY, 0); // turn off Backlight, Frequency already is set to 250Hz default

6
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
View File

@ -124,8 +124,7 @@ namespace FTDI {
case UNPRESSED:
if (tag != 0) {
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Touch start: ", tag);
SERIAL_ECHO_MSG("Touch start: ", int(tag));
#endif
pressed_tag = tag;
@ -186,8 +185,7 @@ namespace FTDI {
if (UIData::flags.bits.touch_end_sound) sound.play(unpress_sound);
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Touch end: ", pressed_tag);
SERIAL_ECHO_MSG("Touch end: ", int(pressed_tag));
#endif
const uint8_t saved_pressed_tag = pressed_tag;

3
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.cpp
View File

@ -43,8 +43,7 @@ void ScreenRef::setScreen(onRedraw_func_t onRedraw_ptr) {
if (type != 0xFF) {
setType(type);
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("New screen: ", type);
SERIAL_ECHO_MSG("New screen: ", int(type));
#endif
}
}

3
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
View File

@ -127,8 +127,7 @@ void BioPrintingDialogBox::setStatusMessage(const char* message) {
storeBackground();
#if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("New status message: ", message);
SERIAL_ECHO_MSG("New status message: ", message);
#endif
if (AT_SCREEN(BioPrintingDialogBox))

64
Marlin/src/module/settings.cpp
View File

@ -2946,7 +2946,7 @@ void MarlinSettings::reset() {
}
#define CONFIG_ECHO_START() do{ if (!forReplay) SERIAL_ECHO_START(); }while(0)
#define CONFIG_ECHO_MSG(STR) do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define CONFIG_ECHO_MSG(V...) do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPAIR(V); }while(0)
#define CONFIG_ECHO_HEADING(STR) config_heading(forReplay, PSTR(STR))
#if HAS_TRINAMIC_CONFIG
@ -3039,26 +3039,24 @@ void MarlinSettings::reset() {
}
#if EXTRUDERS == 1
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M200 S", int(parser.volumetric_enabled)
, " D", LINEAR_UNIT(planner.filament_size[0])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[0])
#endif
);
CONFIG_ECHO_MSG(" M200 S", int(parser.volumetric_enabled)
, " D", LINEAR_UNIT(planner.filament_size[0])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[0])
#endif
);
#else
LOOP_L_N(i, EXTRUDERS) {
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M200 T", int(i)
, " D", LINEAR_UNIT(planner.filament_size[i])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[i])
#endif
);
CONFIG_ECHO_MSG(" M200 T", int(i)
, " D", LINEAR_UNIT(planner.filament_size[i])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[i])
#endif
);
}
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M200 S", int(parser.volumetric_enabled));
CONFIG_ECHO_MSG(" M200 S", int(parser.volumetric_enabled));
#endif
#endif // EXTRUDERS && !NO_VOLUMETRICS
CONFIG_ECHO_HEADING("Steps per unit:");
@ -3194,7 +3192,7 @@ void MarlinSettings::reset() {
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M420 S"), planner.leveling_active ? 1 : 0
PSTR(" M420 S"), int(planner.leveling_active)
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, SP_Z_STR, LINEAR_UNIT(planner.z_fade_height)
#endif
@ -3260,8 +3258,7 @@ void MarlinSettings::reset() {
#elif ENABLED(BLTOUCH) || (HAS_Z_SERVO_PROBE && defined(Z_SERVO_ANGLES))
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M281 P", int(i), " L", servo_angles[i][0], " U", servo_angles[i][1]);
CONFIG_ECHO_MSG(" M281 P", int(i), " L", servo_angles[i][0], " U", servo_angles[i][1]);
default: break;
}
}
@ -3382,8 +3379,7 @@ void MarlinSettings::reset() {
#endif // PIDTEMP
#if ENABLED(PIDTEMPBED)
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(
CONFIG_ECHO_MSG(
" M304 P", thermalManager.temp_bed.pid.Kp
, " I", unscalePID_i(thermalManager.temp_bed.pid.Ki)
, " D", unscalePID_d(thermalManager.temp_bed.pid.Kd)
@ -3400,16 +3396,14 @@ void MarlinSettings::reset() {
#if HAS_LCD_CONTRAST
CONFIG_ECHO_HEADING("LCD Contrast:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M250 C", ui.contrast);
CONFIG_ECHO_MSG(" M250 C", ui.contrast);
#endif
TERN_(CONTROLLER_FAN_EDITABLE, M710_report(forReplay));
#if ENABLED(POWER_LOSS_RECOVERY)
CONFIG_ECHO_HEADING("Power-Loss Recovery:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M413 S", int(recovery.enabled));
CONFIG_ECHO_MSG(" M413 S", int(recovery.enabled));
#endif
#if ENABLED(FWRETRACT)
@ -3424,8 +3418,7 @@ void MarlinSettings::reset() {
);
CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(
CONFIG_ECHO_MSG(
" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_extra)
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_extra)
, " F", LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_recover_feedrate_mm_s))
@ -3434,8 +3427,7 @@ void MarlinSettings::reset() {
#if ENABLED(FWRETRACT_AUTORETRACT)
CONFIG_ECHO_HEADING("Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M209 S", fwretract.autoretract_enabled ? 1 : 0);
CONFIG_ECHO_MSG(" M209 S", int(fwretract.autoretract_enabled));
#endif // FWRETRACT_AUTORETRACT
@ -3780,13 +3772,10 @@ void MarlinSettings::reset() {
#if ENABLED(LIN_ADVANCE)
CONFIG_ECHO_HEADING("Linear Advance:");
#if EXTRUDERS < 2
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
CONFIG_ECHO_MSG(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS) {
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M900 T", int(i), " K", planner.extruder_advance_K[i]);
}
LOOP_L_N(i, EXTRUDERS)
CONFIG_ECHO_MSG(" M900 T", int(i), " K", planner.extruder_advance_K[i]);
#endif
#endif
@ -3851,8 +3840,7 @@ void MarlinSettings::reset() {
#if HAS_FILAMENT_SENSOR
CONFIG_ECHO_HEADING("Filament runout sensor:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(
CONFIG_ECHO_MSG(
" M412 S", int(runout.enabled)
#if HAS_FILAMENT_RUNOUT_DISTANCE
, " D", LINEAR_UNIT(runout.runout_distance())

3
Marlin/src/module/temperature.cpp
View File

@ -1037,8 +1037,7 @@ void Temperature::min_temp_error(const heater_id_t heater_id) {
#if ENABLED(PID_BED_DEBUG)
{
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(
SERIAL_ECHO_MSG(
" PID_BED_DEBUG : Input ", temp_bed.celsius, " Output ", pid_output,
#if DISABLED(PID_OPENLOOP)
STR_PID_DEBUG_PTERM, work_pid.Kp,

3
Marlin/src/module/tool_change.cpp
View File

@ -1196,8 +1196,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
gcode.process_subcommands_now_P(PSTR(EVENT_GCODE_AFTER_TOOLCHANGE));
#endif
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_ACTIVE_EXTRUDER, int(active_extruder));
SERIAL_ECHO_MSG(STR_ACTIVE_EXTRUDER, int(active_extruder));
#endif // HAS_MULTI_EXTRUDER
}

16
Marlin/src/sd/cardreader.cpp
View File

@ -270,10 +270,9 @@ void CardReader::printListing(SdFile parent, const char * const prepend/*=nullpt
// Get a new directory object using the full path
// and dive recursively into it.
SdFile child;
if (!child.open(&parent, dosFilename, O_READ)) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_SD_CANT_OPEN_SUBDIR, dosFilename);
}
if (!child.open(&parent, dosFilename, O_READ))
SERIAL_ECHO_MSG(STR_SD_CANT_OPEN_SUBDIR, dosFilename);
printListing(child, path);
// close() is done automatically by destructor of SdFile
}
@ -594,8 +593,7 @@ void CardReader::openFileRead(char * const path, const uint8_t subcall_type/*=0*
filespos[file_subcall_ctr] = sdpos;
// For sub-procedures say 'SUBROUTINE CALL target: "..." parent: "..." pos12345'
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("SUBROUTINE CALL target:\"", path, "\" parent:\"", proc_filenames[file_subcall_ctr], "\" pos", sdpos);
SERIAL_ECHO_MSG("SUBROUTINE CALL target:\"", path, "\" parent:\"", proc_filenames[file_subcall_ctr], "\" pos", sdpos);
file_subcall_ctr++;
break;
@ -941,10 +939,8 @@ void CardReader::cd(const char * relpath) {
workDirParents[workDirDepth++] = workDir;
TERN_(SDCARD_SORT_ALPHA, presort());
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(STR_SD_CANT_ENTER_SUBDIR, relpath);
}
else
SERIAL_ECHO_MSG(STR_SD_CANT_ENTER_SUBDIR, relpath);
}
int8_t CardReader::cdup() {