bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Apply physical limits to mesh bounds

Browse Source
This commit is contained in:
Scott Lahteine 2017-10-19 01:39:39 -05:00
parent 4e2baeb3e1
commit 580b6e9089
78 changed files with 615 additions and 2157 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -685,69 +687,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/default/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/default/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -685,69 +687,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View File

@ -957,7 +957,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/Anet/A6/Configuration.h
View File

@ -1080,7 +1080,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Anet/A8/Configuration.h
View File

@ -943,7 +943,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View File

@ -928,7 +928,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View File

@ -938,7 +938,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M104 S0\nM84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -681,69 +683,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View File

@ -928,7 +928,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Cartesio/Configuration.h
View File

@ -936,7 +936,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View File

@ -947,7 +947,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Felix/Configuration.h
View File

@ -919,7 +919,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Felix/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View File

@ -919,7 +919,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h
View File

@ -934,7 +934,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y 10

81
Marlin/src/config/examples/Folger Tech/i3-2020/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -685,69 +687,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View File

@ -952,7 +952,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View File

@ -941,7 +941,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Malyan/M150/Configuration.h
View File

@ -965,7 +965,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -681,69 +683,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View File

@ -941,7 +941,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View File

@ -941,7 +941,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View File

@ -939,7 +939,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -705,69 +707,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/RigidBot/Configuration.h
View File

@ -935,7 +935,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/SCARA/Configuration.h
View File

@ -949,7 +949,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/SCARA/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Sanguinololu/Configuration.h
View File

@ -968,7 +968,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View File

@ -478,12 +478,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -673,69 +675,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/TinyBoy2/Configuration.h
View File

@ -993,7 +993,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View File

@ -967,7 +967,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

73
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -502,7 +502,7 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
@ -694,69 +694,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View File

@ -937,7 +937,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View File

@ -1063,7 +1063,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -491,12 +491,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -686,69 +688,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -1057,7 +1057,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -491,12 +491,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -686,69 +688,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/delta/generic/Configuration.h
View File

@ -1052,7 +1052,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View File

@ -491,12 +491,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -686,69 +688,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View File

@ -1055,7 +1055,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -491,12 +491,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -686,69 +688,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View File

@ -1055,7 +1055,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
View File

@ -496,12 +496,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -691,69 +693,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View File

@ -1064,7 +1064,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -491,12 +491,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -686,69 +688,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View File

@ -951,7 +951,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 45 // Mesh inset margin on print area
#define MESH_INSET 45 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/makibox/Configuration.h
View File

@ -940,7 +940,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/makibox/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View File

@ -924,7 +924,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

2
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View File

@ -932,7 +932,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

2
Marlin/src/config/examples/wt150/Configuration.h
View File

@ -942,7 +942,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

81
Marlin/src/config/examples/wt150/Configuration_adv.h
View File

@ -489,12 +489,14 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
// using:
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
#define SDCARD_RATHERRECENTFIRST
// Add an option in the menu to run all auto#.g files
//#define MENU_ADDAUTOSTART
/**
@ -684,69 +686,16 @@
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#endif
// Default mesh area is an area with an inset margin on the print area.
// Below are the macros that are used to define the borders for the mesh area,
// made available here for specialized needs, ie dual extruder setup.
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET))
#elif IS_SCARA
#define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET)
#define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0))
#define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0))
#define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE))
#define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE))
#endif
#endif
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET))
#elif IS_SCARA
#define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET)
#define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#if ENABLED(BED_CENTER_AT_0_0)
#define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2)
#define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2)
#define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2)
#define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2)
#else
#define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0))
#define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE))
#define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE))
#endif
#endif
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET
//#define MESH_MIN_Y MESH_INSET
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
// If this is defined, the currently active mesh will be saved in the
// current slot on M500.
#define UBL_SAVE_ACTIVE_ON_M500
#if ENABLED(AUTO_BED_LEVELING_UBL)
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
#endif
#endif
// @section extras

8
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View File

@ -125,9 +125,9 @@
SERIAL_ECHO_SP(spaces + 3);
serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1);
SERIAL_EOL();
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y);
serial_echo_xy(MESH_MIN_X, MESH_MAX_Y);
SERIAL_ECHO_SP(spaces);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y);
serial_echo_xy(MESH_MAX_X, MESH_MAX_Y);
SERIAL_EOL();
}
else {
@ -174,9 +174,9 @@
}
if (map_type == 0) {
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y);
serial_echo_xy(MESH_MIN_X, MESH_MIN_Y);
SERIAL_ECHO_SP(spaces + 4);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y);
serial_echo_xy(MESH_MAX_X, MESH_MIN_Y);
SERIAL_EOL();
serial_echo_xy(0, 0);
SERIAL_ECHO_SP(spaces + 5);

48
Marlin/src/feature/bedlevel/ubl/ubl.h
View File

@ -67,8 +67,8 @@ extern uint8_t ubl_cnt;
void lcd_quick_feedback();
#endif
#define MESH_X_DIST (float(UBL_MESH_MAX_X - (UBL_MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1))
#define MESH_Y_DIST (float(UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1))
#define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1))
#define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1))
class unified_bed_leveling {
private:
@ -162,25 +162,25 @@ class unified_bed_leveling {
// 15 is the maximum nubmer of grid points supported + 1 safety margin for now,
// until determinism prevails
constexpr static float _mesh_index_to_xpos[16] PROGMEM = {
UBL_MESH_MIN_X + 0 * (MESH_X_DIST), UBL_MESH_MIN_X + 1 * (MESH_X_DIST),
UBL_MESH_MIN_X + 2 * (MESH_X_DIST), UBL_MESH_MIN_X + 3 * (MESH_X_DIST),
UBL_MESH_MIN_X + 4 * (MESH_X_DIST), UBL_MESH_MIN_X + 5 * (MESH_X_DIST),
UBL_MESH_MIN_X + 6 * (MESH_X_DIST), UBL_MESH_MIN_X + 7 * (MESH_X_DIST),
UBL_MESH_MIN_X + 8 * (MESH_X_DIST), UBL_MESH_MIN_X + 9 * (MESH_X_DIST),
UBL_MESH_MIN_X + 10 * (MESH_X_DIST), UBL_MESH_MIN_X + 11 * (MESH_X_DIST),
UBL_MESH_MIN_X + 12 * (MESH_X_DIST), UBL_MESH_MIN_X + 13 * (MESH_X_DIST),
UBL_MESH_MIN_X + 14 * (MESH_X_DIST), UBL_MESH_MIN_X + 15 * (MESH_X_DIST)
MESH_MIN_X + 0 * (MESH_X_DIST), MESH_MIN_X + 1 * (MESH_X_DIST),
MESH_MIN_X + 2 * (MESH_X_DIST), MESH_MIN_X + 3 * (MESH_X_DIST),
MESH_MIN_X + 4 * (MESH_X_DIST), MESH_MIN_X + 5 * (MESH_X_DIST),
MESH_MIN_X + 6 * (MESH_X_DIST), MESH_MIN_X + 7 * (MESH_X_DIST),
MESH_MIN_X + 8 * (MESH_X_DIST), MESH_MIN_X + 9 * (MESH_X_DIST),
MESH_MIN_X + 10 * (MESH_X_DIST), MESH_MIN_X + 11 * (MESH_X_DIST),
MESH_MIN_X + 12 * (MESH_X_DIST), MESH_MIN_X + 13 * (MESH_X_DIST),
MESH_MIN_X + 14 * (MESH_X_DIST), MESH_MIN_X + 15 * (MESH_X_DIST)
};
constexpr static float _mesh_index_to_ypos[16] PROGMEM = {
UBL_MESH_MIN_Y + 0 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 1 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 2 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 3 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 4 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 5 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 6 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 7 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 8 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 9 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 10 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 11 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 12 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 13 * (MESH_Y_DIST),
UBL_MESH_MIN_Y + 14 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 15 * (MESH_Y_DIST)
MESH_MIN_Y + 0 * (MESH_Y_DIST), MESH_MIN_Y + 1 * (MESH_Y_DIST),
MESH_MIN_Y + 2 * (MESH_Y_DIST), MESH_MIN_Y + 3 * (MESH_Y_DIST),
MESH_MIN_Y + 4 * (MESH_Y_DIST), MESH_MIN_Y + 5 * (MESH_Y_DIST),
MESH_MIN_Y + 6 * (MESH_Y_DIST), MESH_MIN_Y + 7 * (MESH_Y_DIST),
MESH_MIN_Y + 8 * (MESH_Y_DIST), MESH_MIN_Y + 9 * (MESH_Y_DIST),
MESH_MIN_Y + 10 * (MESH_Y_DIST), MESH_MIN_Y + 11 * (MESH_Y_DIST),
MESH_MIN_Y + 12 * (MESH_Y_DIST), MESH_MIN_Y + 13 * (MESH_Y_DIST),
MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST)
};
static bool g26_debug_flag, has_control_of_lcd_panel;
@ -196,14 +196,14 @@ class unified_bed_leveling {
FORCE_INLINE static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; }
static int8_t get_cell_index_x(const float &x) {
const int8_t cx = (x - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST));
const int8_t cx = (x - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST));
return constrain(cx, 0, (GRID_MAX_POINTS_X) - 1); // -1 is appropriate if we want all movement to the X_MAX
} // position. But with this defined this way, it is possible
// to extrapolate off of this point even further out. Probably
// that is OK because something else should be keeping that from
// happening and should not be worried about at this level.
static int8_t get_cell_index_y(const float &y) {
const int8_t cy = (y - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST));
const int8_t cy = (y - (MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST));
return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 1); // -1 is appropriate if we want all movement to the Y_MAX
} // position. But with this defined this way, it is possible
// to extrapolate off of this point even further out. Probably
@ -211,12 +211,12 @@ class unified_bed_leveling {
// happening and should not be worried about at this level.
static int8_t find_closest_x_index(const float &x) {
const int8_t px = (x - (UBL_MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST));
const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST));
return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1;
}
static int8_t find_closest_y_index(const float &y) {
const int8_t py = (y - (UBL_MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST));
const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST));
return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1;
}
@ -362,11 +362,11 @@ class unified_bed_leveling {
}
FORCE_INLINE static float mesh_index_to_xpos(const uint8_t i) {
return i < GRID_MAX_POINTS_X ? pgm_read_float(&_mesh_index_to_xpos[i]) : UBL_MESH_MIN_X + i * (MESH_X_DIST);
return i < GRID_MAX_POINTS_X ? pgm_read_float(&_mesh_index_to_xpos[i]) : MESH_MIN_X + i * (MESH_X_DIST);
}
FORCE_INLINE static float mesh_index_to_ypos(const uint8_t i) {
return i < GRID_MAX_POINTS_Y ? pgm_read_float(&_mesh_index_to_ypos[i]) : UBL_MESH_MIN_Y + i * (MESH_Y_DIST);
return i < GRID_MAX_POINTS_Y ? pgm_read_float(&_mesh_index_to_ypos[i]) : MESH_MIN_Y + i * (MESH_Y_DIST);
}
static bool prepare_segmented_line_to(const float ltarget[XYZE], const float &feedrate);

24
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -415,7 +415,7 @@
z2 -= get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y)) /* + zprobe_zoffset */ ;
z3 -= get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y)) /* + zprobe_zoffset */ ;
do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y)));
do_blocking_move_to_xy(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y)));
tilt_mesh_based_on_3pts(z1, z2, z3);
restore_ubl_active_state_and_leave();
}
@ -778,8 +778,8 @@
restore_ubl_active_state_and_leave();
do_blocking_move_to_xy(
constrain(lx - (X_PROBE_OFFSET_FROM_EXTRUDER), UBL_MESH_MIN_X, UBL_MESH_MAX_X),
constrain(ly - (Y_PROBE_OFFSET_FROM_EXTRUDER), UBL_MESH_MIN_Y, UBL_MESH_MAX_Y)
constrain(lx - (X_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_X, MESH_MAX_X),
constrain(ly - (Y_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_Y, MESH_MAX_Y)
);
}
@ -915,7 +915,7 @@
save_ubl_active_state_and_disable(); // Disable bed level correction for probing
do_blocking_move_to_z(in_height);
do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y)));
do_blocking_move_to_xy(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y)));
//, min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]) / 2.0);
stepper.synchronize();
@ -1221,11 +1221,11 @@
SERIAL_EOL();
#endif
SERIAL_ECHOLNPAIR("UBL_MESH_MIN_X " STRINGIFY(UBL_MESH_MIN_X) "=", UBL_MESH_MIN_X);
SERIAL_ECHOLNPAIR("UBL_MESH_MIN_Y " STRINGIFY(UBL_MESH_MIN_Y) "=", UBL_MESH_MIN_Y);
SERIAL_ECHOLNPAIR("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X);
SERIAL_ECHOLNPAIR("MESH_MIN_Y " STRINGIFY(MESH_MIN_Y) "=", MESH_MIN_Y);
safe_delay(25);
SERIAL_ECHOLNPAIR("UBL_MESH_MAX_X " STRINGIFY(UBL_MESH_MAX_X) "=", UBL_MESH_MAX_X);
SERIAL_ECHOLNPAIR("UBL_MESH_MAX_Y " STRINGIFY(UBL_MESH_MAX_Y) "=", UBL_MESH_MAX_Y);
SERIAL_ECHOLNPAIR("MESH_MAX_X " STRINGIFY(MESH_MAX_X) "=", MESH_MAX_X);
SERIAL_ECHOLNPAIR("MESH_MAX_Y " STRINGIFY(MESH_MAX_Y) "=", MESH_MAX_Y);
safe_delay(25);
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X);
SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y);
@ -1641,10 +1641,10 @@
#if HAS_BED_PROBE
void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map) {
constexpr int16_t x_min = max(MIN_PROBE_X, UBL_MESH_MIN_X),
x_max = min(MAX_PROBE_X, UBL_MESH_MAX_X),
y_min = max(MIN_PROBE_Y, UBL_MESH_MIN_Y),
y_max = min(MAX_PROBE_Y, UBL_MESH_MAX_Y);
constexpr int16_t x_min = max(MIN_PROBE_X, MESH_MIN_X),
x_max = min(MAX_PROBE_X, MESH_MAX_X),
y_min = max(MIN_PROBE_Y, MESH_MIN_Y),
y_max = min(MAX_PROBE_Y, MESH_MAX_Y);
const float dx = float(x_max - x_min) / (g29_grid_size - 1.0),
dy = float(y_max - y_min) / (g29_grid_size - 1.0);

4
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
View File

@ -622,8 +622,8 @@
// in top of loop and again re-find same adjacent cell and use it, just less efficient
// for mesh inset area.
int8_t cell_xi = (seg_rx - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST)),
cell_yi = (seg_ry - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_X_DIST));
int8_t cell_xi = (seg_rx - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST)),
cell_yi = (seg_ry - (MESH_MIN_Y)) * (1.0 / (MESH_X_DIST));
cell_xi = constrain(cell_xi, 0, (GRID_MAX_POINTS_X) - 1);
cell_yi = constrain(cell_yi, 0, (GRID_MAX_POINTS_Y) - 1);

99
Marlin/src/inc/Conditionals_post.h
View File

@ -810,9 +810,12 @@
#endif
/**
* Delta endstops, radius/rod trimmers, angle trimmers
* Delta radius/rod trimmers/angle trimmers
*/
#if ENABLED(DELTA)
#ifndef DELTA_PROBEABLE_RADIUS
#define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
#endif
#ifndef DELTA_CALIBRATION_RADIUS
#define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - 10
#endif
@ -833,7 +836,6 @@
/**
* Set granular options based on the specific type of leveling
*/
#define UBL_DELTA (ENABLED(AUTO_BED_LEVELING_UBL) && (ENABLED(DELTA) || ENABLED(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN)))
#define ABL_PLANAR (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
#define ABL_GRID (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
@ -849,6 +851,70 @@
#define PROBE_BED_HEIGHT abs(BACK_PROBE_BED_POSITION - (FRONT_PROBE_BED_POSITION))
#endif
/**
* Bed Probing rectangular bounds
* These can be further constrained in code for Delta and SCARA
*/
#if ENABLED(DELTA)
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MIN_PROBE_X (X_CENTER - (DELTA_PROBEABLE_RADIUS))
#define MIN_PROBE_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS))
#define MAX_PROBE_X (X_CENTER + DELTA_PROBEABLE_RADIUS)
#define MAX_PROBE_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS)
#elif IS_SCARA
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#define MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS))
#define MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS))
#define MAX_PROBE_X (X_CENTER + SCARA_PRINTABLE_RADIUS)
#define MAX_PROBE_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS)
#else
// Boundaries for Cartesian probing based on bed limits
#define MIN_PROBE_X (max(X_MIN_BED, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define MIN_PROBE_Y (max(Y_MIN_BED, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_X (min(X_MAX_BED, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define MAX_PROBE_Y (min(Y_MAX_BED, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#endif
/**
* Default mesh area is an area with an inset margin on the print area.
*/
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
#if IS_KINEMATIC
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define _MESH_MIN_X (MIN_PROBE_X + MESH_INSET)
#define _MESH_MIN_Y (MIN_PROBE_Y + MESH_INSET)
#define _MESH_MAX_X (MAX_PROBE_X - (MESH_INSET))
#define _MESH_MAX_Y (MAX_PROBE_Y - (MESH_INSET))
#else
// Boundaries for Cartesian probing based on set limits
#define _MESH_MIN_X (max(X_MIN_BED + MESH_INSET, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define _MESH_MIN_Y (max(Y_MIN_BED + MESH_INSET, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#define _MESH_MAX_X (min(X_MAX_BED - (MESH_INSET), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
#define _MESH_MAX_Y (min(Y_MAX_BED - (MESH_INSET), Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
#endif
/**
* These may be overridden in Configuration if a smaller area is wanted
*/
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
#ifndef MESH_MIN_X
#define MESH_MIN_X _MESH_MIN_X
#endif
#ifndef MESH_MIN_Y
#define MESH_MIN_Y _MESH_MIN_Y
#endif
#ifndef MESH_MAX_X
#define MESH_MAX_X _MESH_MAX_X
#endif
#ifndef MESH_MAX_Y
#define MESH_MAX_Y _MESH_MAX_Y
#endif
#endif
#endif // MESH_BED_LEVELING || AUTO_BED_LEVELING_UBL
/**
* Buzzer/Speaker
*/
@ -899,35 +965,6 @@
#define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT
#endif
/**
* Bed Probing rectangular bounds
* These can be further constrained in code for Delta and SCARA
*/
#if ENABLED(DELTA)
#ifndef DELTA_PROBEABLE_RADIUS
#define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
#endif
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
// so that may be added to SanityCheck.h in the future.
#define MIN_PROBE_X (X_CENTER - (DELTA_PROBEABLE_RADIUS))
#define MIN_PROBE_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS))
#define MAX_PROBE_X (X_CENTER + DELTA_PROBEABLE_RADIUS)
#define MAX_PROBE_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS)
#elif IS_SCARA
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
#define MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS))
#define MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS))
#define MAX_PROBE_X (X_CENTER + SCARA_PRINTABLE_RADIUS)
#define MAX_PROBE_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS)
#else
// Boundaries for Cartesian probing based on bed limits
#define MIN_PROBE_X (max(X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER, X_MIN_BED))
#define MIN_PROBE_Y (max(Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_MIN_BED))
#define MAX_PROBE_X (min(X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER, X_MAX_BED))
#define MAX_PROBE_Y (min(Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_MAX_BED))
#endif
// Stepper pulse duration, in cycles
#define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
#ifdef CPU_32_BIT

4
Marlin/src/inc/SanityCheck.h
View File

@ -215,6 +215,10 @@
#error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE."
#elif defined(NEOPIXEL_RGBW_LED)
#error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration."
#elif defined(UBL_MESH_INSET)
#error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration."
#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y)
#error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration."
#endif
/**