bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🏗️ Allow headless Flow Meter (#22234)

Browse Source
This commit is contained in:
Mike La Spina
2021-07-12 00:22:08 -05:00
committed by Scott Lahteine
parent 8334e92b6f
commit 5026797310
5 changed files with 19 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
Marlin/src/feature/cooler.cpp
View File

@@ -22,26 +22,27 @@
#include "../inc/MarlinConfig.h"
#if HAS_COOLER
#if EITHER(HAS_COOLER, LASER_COOLANT_FLOW_METER)
#include "cooler.h"
Cooler cooler;
uint8_t Cooler::mode = 0;
uint16_t Cooler::capacity;
uint16_t Cooler::load;
bool Cooler::enabled = false;
#if HAS_COOLER
uint8_t Cooler::mode = 0;
uint16_t Cooler::capacity;
uint16_t Cooler::load;
bool Cooler::enabled = false;
#endif
#if ENABLED(LASER_COOLANT_FLOW_METER)
bool Cooler::flowmeter = false;
millis_t Cooler::flowmeter_next_ms; // = 0
volatile uint16_t Cooler::flowpulses;
float Cooler::flowrate;
#if ENABLED(FLOWMETER_SAFETY)
bool Cooler::flowsafety_enabled = true;
bool Cooler::flowfault = false;
#endif
#endif
#if ENABLED(FLOWMETER_SAFETY)
bool Cooler::flowsafety_enabled = true;
bool Cooler::fault = false;
#endif
#endif // HAS_COOLER
#endif // HAS_COOLER || LASER_COOLANT_FLOW_METER

6
Marlin/src/feature/cooler.h
View File

@@ -94,12 +94,12 @@ public:
}
#if ENABLED(FLOWMETER_SAFETY)
static bool fault; // Flag that the cooler is in a fault state
static bool flowsafety_enabled; // Flag to disable the cutter if flow rate is too low
static bool flowfault; // Flag that the cooler is in a fault state
static bool flowsafety_enabled; // Flag to disable the cutter if flow rate is too low
static void flowsafety_toggle() { flowsafety_enabled = !flowsafety_enabled; }
static bool check_flow_too_low() {
const bool too_low = flowsafety_enabled && flowrate < (FLOWMETER_MIN_LITERS_PER_MINUTE);
if (too_low) fault = true;
flowfault = too_low;
return too_low;
}
#endif

2
Marlin/src/gcode/gcode.cpp
View File

@@ -292,7 +292,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
#endif
#if ENABLED(FLOWMETER_SAFETY)
if (cooler.fault) {
if (cooler.flowfault) {
SERIAL_ECHO_MSG(STR_FLOWMETER_FAULT);
return;
}

2
Marlin/src/module/temperature.cpp
View File

@@ -1555,7 +1555,7 @@ void Temperature::manage_heater() {
#if ENABLED(FLOWMETER_SAFETY)
if (cutter.enabled() && cooler.check_flow_too_low()) {
cutter.disable();
ui.flow_fault();
TERN_(HAS_DISPLAY, ui.flow_fault());
}
#endif
#endif

3
ini/features.ini
View File

@@ -202,7 +202,8 @@ SDSUPPORT = src_filter=+<src/sd/cardreader.cpp> +<s
HAS_MEDIA_SUBCALLS = src_filter=+<src/gcode/sd/M32.cpp>
GCODE_REPEAT_MARKERS = src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
HAS_EXTRUDERS = src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
HAS_COOLER = src_filter=+<src/feature/cooler.cpp> +<src/gcode/temp/M143_M193.cpp>
HAS_COOLER = src_filter=+<src/gcode/temp/M143_M193.cpp>
HAS_COOLER|LASER_COOLANT_FLOW_METER = src_filter=+<src/feature/cooler.cpp>
AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>