ExtUI for Anycubic I3 Mega (#18655)

This commit is contained in:
JBA 2020-07-17 16:07:09 +10:00 committed by GitHub
parent e90bbb37d4
commit 4abad60bf1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 1753 additions and 4 deletions

View File

@ -79,7 +79,7 @@ void GcodeSuite::M125() {
if (pause_print(retract, park_point, 0, show_lcd)) {
TERN_(POWER_LOSS_RECOVERY, if (recovery.enabled) recovery.save(true));
if (!sd_printing || show_lcd) {
if (ENABLED(EXTENSIBLE_UI) || !sd_printing || show_lcd) {
wait_for_confirmation(false, 0);
resume_print(0, 0, -retract, 0);
}

View File

@ -0,0 +1,294 @@
/*
anycubic_serial.cpp --- Support for Anycubic i3 Mega TFT serial connection
Created by Christian Hopp on 09.12.17.
Original file:
HardwareSerial.cpp - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 23 November 2006 by David A. Mellis
Modified 28 September 2010 by Mark Sproul
Modified 14 August 2012 by Alarus
*/
#include "../../../../inc/MarlinConfig.h"
#if ENABLED(ANYCUBIC_TFT_MODEL)
#include "Arduino.h"
// this next line disables the entire HardwareSerial.cpp,
// so I can support AtTiny series and other chips without a UART
#ifdef UBRR3H
#include "anycubic_serial.h"
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include "wiring_private.h"
// Define constants and variables for buffering incoming serial data. We're
// using a ring buffer (I think), in which head is the index of the location
// to which to write the next incoming character and tail is the index of the
// location from which to read.
#if (RAMEND < 1000)
#define SERIAL_BUFFER_SIZE 64
#else
#define SERIAL_BUFFER_SIZE 128
#endif
struct ring_buffer {
unsigned char buffer[SERIAL_BUFFER_SIZE];
volatile unsigned int head;
volatile unsigned int tail;
};
#ifdef UBRR3H
ring_buffer rx_buffer_ajg = { { 0 }, 0, 0 };
ring_buffer tx_buffer_ajg = { { 0 }, 0, 0 };
#endif
inline void store_char(unsigned char c, ring_buffer *buffer) {
int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != buffer->tail) {
buffer->buffer[buffer->head] = c;
buffer->head = i;
}
}
#if defined(USART3_RX_vect) && defined(UDR3)
void serialEvent3() __attribute__((weak));
void serialEvent3() {}
#define serialEvent3_implemented
ISR(USART3_RX_vect) {
if (bit_is_clear(UCSR3A, UPE3)) {
unsigned char c = UDR3;
store_char(c, &rx_buffer_ajg);
}
else {
unsigned char c = UDR3;
}
}
#endif
#ifdef USART3_UDRE_vect
ISR(USART3_UDRE_vect) {
if (tx_buffer_ajg.head == tx_buffer_ajg.tail) {
// Buffer empty, so disable interrupts
cbi(UCSR3B, UDRIE3);
}
else {
// There is more data in the output buffer. Send the next byte
unsigned char c = tx_buffer_ajg.buffer[tx_buffer_ajg.tail];
tx_buffer_ajg.tail = (tx_buffer_ajg.tail + 1) % SERIAL_BUFFER_SIZE;
UDR3 = c;
}
}
#endif
// Constructors ////////////////////////////////////////////////////////////////
AnycubicSerialClass::AnycubicSerialClass(ring_buffer *rx_buffer, ring_buffer *tx_buffer,
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
volatile uint8_t *ucsrc, volatile uint8_t *udr,
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x
) {
_rx_buffer = rx_buffer;
_tx_buffer = tx_buffer;
_ubrrh = ubrrh;
_ubrrl = ubrrl;
_ucsra = ucsra;
_ucsrb = ucsrb;
_ucsrc = ucsrc;
_udr = udr;
_rxen = rxen;
_txen = txen;
_rxcie = rxcie;
_udrie = udrie;
_u2x = u2x;
}
// Public Methods //////////////////////////////////////////////////////////////
void AnycubicSerialClass::begin(unsigned long baud) {
uint16_t baud_setting;
bool use_u2x = true;
#if F_CPU == 16000000UL
// hardcoded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards and the firmware on the 8U2
// on the Uno and Mega 2560.
if (baud == 57600) use_u2x = false;
#endif
try_again:
if (use_u2x) {
*_ucsra = 1 << _u2x;
baud_setting = (F_CPU / 4 / baud - 1) / 2;
} else {
*_ucsra = 0;
baud_setting = (F_CPU / 8 / baud - 1) / 2;
}
if ((baud_setting > 4095) && use_u2x) {
use_u2x = false;
goto try_again;
}
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
*_ubrrh = baud_setting >> 8;
*_ubrrl = baud_setting;
transmitting = false;
sbi(*_ucsrb, _rxen);
sbi(*_ucsrb, _txen);
sbi(*_ucsrb, _rxcie);
cbi(*_ucsrb, _udrie);
}
void AnycubicSerialClass::begin(unsigned long baud, byte config) {
uint16_t baud_setting;
uint8_t current_config;
bool use_u2x = true;
#if F_CPU == 16000000UL
// hardcoded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards and the firmware on the 8U2
// on the Uno and Mega 2560.
if (baud == 57600) use_u2x = false;
#endif
try_again:
if (use_u2x) {
*_ucsra = 1 << _u2x;
baud_setting = (F_CPU / 4 / baud - 1) / 2;
}
else {
*_ucsra = 0;
baud_setting = (F_CPU / 8 / baud - 1) / 2;
}
if ((baud_setting > 4095) && use_u2x) {
use_u2x = false;
goto try_again;
}
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
*_ubrrh = baud_setting >> 8;
*_ubrrl = baud_setting;
//set the data bits, parity, and stop bits
#ifdef __AVR_ATmega8__
config |= 0x80; // select UCSRC register (shared with UBRRH)
#endif
*_ucsrc = config;
sbi(*_ucsrb, _rxen);
sbi(*_ucsrb, _txen);
sbi(*_ucsrb, _rxcie);
cbi(*_ucsrb, _udrie);
}
void AnycubicSerialClass::end() {
// wait for transmission of outgoing data
while (_tx_buffer->head != _tx_buffer->tail)
;
cbi(*_ucsrb, _rxen);
cbi(*_ucsrb, _txen);
cbi(*_ucsrb, _rxcie);
cbi(*_ucsrb, _udrie);
// clear any received data
_rx_buffer->head = _rx_buffer->tail;
}
int AnycubicSerialClass::available(void) {
return (int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE;
}
int AnycubicSerialClass::peek(void) {
if (_rx_buffer->head == _rx_buffer->tail) {
return -1;
} else {
return _rx_buffer->buffer[_rx_buffer->tail];
}
}
int AnycubicSerialClass::read(void) {
// if the head isn't ahead of the tail, we don't have any characters
if (_rx_buffer->head == _rx_buffer->tail) {
return -1;
} else {
unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
_rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE;
return c;
}
}
void AnycubicSerialClass::flush() {
// UDR is kept full while the buffer is not empty, so TXC triggers when EMPTY && SENT
while (transmitting && ! (*_ucsra & _BV(TXC0)));
transmitting = false;
}
size_t AnycubicSerialClass::write(uint8_t c) {
int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE;
// If the output buffer is full, there's nothing for it other than to
// wait for the interrupt handler to empty it a bit
// ???: return 0 here instead?
while (i == _tx_buffer->tail)
;
_tx_buffer->buffer[_tx_buffer->head] = c;
_tx_buffer->head = i;
sbi(*_ucsrb, _udrie);
// clear the TXC bit -- "can be cleared by writing a one to its bit location"
transmitting = true;
sbi(*_ucsra, TXC0);
return 1;
}
AnycubicSerialClass::operator bool() {
return true;
}
// Preinstantiate Objects //////////////////////////////////////////////////////
#ifdef UBRR3H
AnycubicSerialClass AnycubicSerial(&rx_buffer_ajg, &tx_buffer_ajg, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3);
#endif
#endif // UBRR3H
#endif // ANYCUBIC_TFT_MODEL

View File

@ -0,0 +1,143 @@
/*
anycubic_serial.h --- Support for Anycubic i3 Mega TFT serial connection
Created by Christian Hopp on 09.12.17.
Original file:
HardwareSerial.h - Hardware serial library for Wiring
Copyright (c) 2006 Nicholas Zambetti. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Modified 28 September 2010 by Mark Sproul
Modified 14 August 2012 by Alarus
*/
#pragma once
#include <inttypes.h>
#include <avr/pgmspace.h>
#include "Stream.h"
#define FORCE_INLINE __attribute__((always_inline)) inline
struct ring_buffer;
class AnycubicSerialClass : public Stream {
private:
ring_buffer *_rx_buffer;
ring_buffer *_tx_buffer;
volatile uint8_t *_ubrrh;
volatile uint8_t *_ubrrl;
volatile uint8_t *_ucsra;
volatile uint8_t *_ucsrb;
volatile uint8_t *_ucsrc;
volatile uint8_t *_udr;
uint8_t _rxen;
uint8_t _txen;
uint8_t _rxcie;
uint8_t _udrie;
uint8_t _u2x;
bool transmitting;
public:
AnycubicSerialClass(ring_buffer *rx_buffer, ring_buffer *tx_buffer,
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
volatile uint8_t *ucsrc, volatile uint8_t *udr,
uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x
);
void begin(unsigned long);
void begin(unsigned long, uint8_t);
void end();
virtual int available(void);
virtual int peek(void);
virtual int read(void);
virtual void flush(void);
virtual size_t write(uint8_t);
inline size_t write(unsigned long n) { return write((uint8_t)n); }
inline size_t write(long n) { return write((uint8_t)n); }
inline size_t write(unsigned int n) { return write((uint8_t)n); }
inline size_t write(int n) { return write((uint8_t)n); }
using Print::write; // pull in write(str) and write(buf, size) from Print
operator bool();
};
// Define config for Serial.begin(baud, config);
#define SERIAL_5N1 0x00
#define SERIAL_6N1 0x02
#define SERIAL_7N1 0x04
#define SERIAL_8N1 0x06
#define SERIAL_5N2 0x08
#define SERIAL_6N2 0x0A
#define SERIAL_7N2 0x0C
#define SERIAL_8N2 0x0E
#define SERIAL_5E1 0x20
#define SERIAL_6E1 0x22
#define SERIAL_7E1 0x24
#define SERIAL_8E1 0x26
#define SERIAL_5E2 0x28
#define SERIAL_6E2 0x2A
#define SERIAL_7E2 0x2C
#define SERIAL_8E2 0x2E
#define SERIAL_5O1 0x30
#define SERIAL_6O1 0x32
#define SERIAL_7O1 0x34
#define SERIAL_8O1 0x36
#define SERIAL_5O2 0x38
#define SERIAL_6O2 0x3A
#define SERIAL_7O2 0x3C
#define SERIAL_8O2 0x3E
extern void serialEventRun(void) __attribute__((weak));
#define ANYCUBIC_SERIAL_PROTOCOL(x) (AnycubicSerial.print(x))
#define ANYCUBIC_SERIAL_PROTOCOL_F(x,y) (AnycubicSerial.print(x,y))
#define ANYCUBIC_SERIAL_PROTOCOLPGM(x) (AnycubicSerialprintPGM(PSTR(x)))
#define ANYCUBIC_SERIAL_(x) (AnycubicSerial.print(x),AnycubicSerial.write('\n'))
#define ANYCUBIC_SERIAL_PROTOCOLLN(x) (AnycubicSerial.print(x),AnycubicSerial.write('\r'),AnycubicSerial.write('\n'))
#define ANYCUBIC_SERIAL_PROTOCOLLNPGM(x) (AnycubicSerialprintPGM(PSTR(x)),AnycubicSerial.write('\r'),AnycubicSerial.write('\n'))
#define ANYCUBIC_SERIAL_START() (AnycubicSerial.write('\r'),AnycubicSerial.write('\n'))
#define ANYCUBIC_SERIAL_CMD_SEND(x) (AnycubicSerialprintPGM(PSTR(x)),AnycubicSerial.write('\r'),AnycubicSerial.write('\n'))
#define ANYCUBIC_SERIAL_ENTER() (AnycubicSerial.write('\r'),AnycubicSerial.write('\n'))
#define ANYCUBIC_SERIAL_SPACE() (AnycubicSerial.write(' '))
const char newErr[] PROGMEM = "ERR ";
const char newSucc[] PROGMEM = "OK";
#define ANYCUBIC_SERIAL_ERROR_START (AnycubicSerialprintPGM(newErr))
#define ANYCUBIC_SERIAL_ERROR(x) ANYCUBIC_SERIAL_PROTOCOL(x)
#define ANYCUBIC_SERIAL_ERRORPGM(x) ANYCUBIC_SERIAL_PROTOCOLPGM(x)
#define ANYCUBIC_SERIAL_ERRORLN(x) ANYCUBIC_SERIAL_PROTOCOLLN(x)
#define ANYCUBIC_SERIAL_ERRORLNPGM(x) ANYCUBIC_SERIAL_PROTOCOLLNPGM(x)
//##define ANYCUBIC_SERIAL_ECHO_START (AnycubicSerialprintPGM(newSucc))
#define ANYCUBIC_SERIAL_ECHOLN(x) ANYCUBIC_SERIAL_PROTOCOLLN(x)
#define ANYCUBIC_SERIAL_SUCC_START (AnycubicSerialprintPGM(newSucc))
#define ANYCUBIC_SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value)))
#define ANYCUBIC_SERIAL_ECHOPGM(x) ANYCUBIC_SERIAL_PROTOCOLPGM(x)
#define ANYCUBIC_SERIAL_ECHO(x) ANYCUBIC_SERIAL_PROTOCOL(x)
FORCE_INLINE void AnycubicSerialprintPGM(const char *str) {
char ch=pgm_read_byte(str);
while (ch) {
AnycubicSerial.write(ch);
ch=pgm_read_byte(++str);
}
}
#ifdef UBRR3H
extern AnycubicSerialClass AnycubicSerial;
#endif

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,114 @@
/**
* anycubic_tft.h --- Support for Anycubic i3 Mega TFT
* Created by Christian Hopp on 09.12.17.
* Improved by David Ramiro
* Converted to ext_iu by John BouAntoun 21 June 2020
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#pragma once
#include "../../../../inc/MarlinConfigPre.h"
#include "../../../../sd/SdFatConfig.h" // for the FILENAME_LENGTH macro
// command sending macro's with debugging capability
#define ANYCUBIC_SENDCOMMANDPGM(x) ANYCUBIC_SERIAL_PROTOCOLLNPGM(x)
#define ANYCUBIC_SENDCOMMANDPGM_VAL(x,y) (ANYCUBIC_SERIAL_PROTOCOLPGM(x), ANYCUBIC_SERIAL_PROTOCOLLN(itostr3(y)))
#define ANYCUBIC_SENDCOMMAND(x) ANYCUBIC_SERIAL_PROTOCOLLN(x)
#if ENABLED(ANYCUBIC_TFT_DEBUG)
#define ANYCUBIC_SENDCOMMAND_DBG_PGM(x,y) (ANYCUBIC_SERIAL_PROTOCOLLNPGM(x), SERIAL_ECHOLNPGM(y))
#define ANYCUBIC_SENDCOMMAND_DBG_PGM_VAL(x,y,z) (ANYCUBIC_SERIAL_PROTOCOLLNPGM(x), SERIAL_ECHOPGM(y), SERIAL_ECHOLN(z))
#else
#define ANYCUBIC_SENDCOMMAND_DBG_PGM(x,y) (ANYCUBIC_SERIAL_PROTOCOLLNPGM(x))
#define ANYCUBIC_SENDCOMMAND_DBG_PGM_VAL(x,y,z) (ANYCUBIC_SERIAL_PROTOCOLLNPGM(x))
#endif
char *itostr2(const uint8_t &x);
#ifndef ULTRA_LCD
char *itostr3(const int);
char *ftostr32(const float &);
#endif
#define TFTBUFSIZE 4
#define TFT_MAX_CMD_SIZE 96
enum AnycubicMediaPrintState {
AMPRINTSTATE_NOT_PRINTING,
AMPRINTSTATE_PRINTING,
AMPRINTSTATE_PAUSE_REQUESTED,
AMPRINTSTATE_PAUSED,
AMPRINTSTATE_STOP_REQUESTED
};
enum AnycubicMediaPauseState {
AMPAUSESTATE_NOT_PAUSED,
AMPAUSESTATE_PARKING,
AMPAUSESTATE_PARKED,
AMPAUSESTATE_FILAMENT_OUT,
AMPAUSESTATE_FIAMENT_PRUGING,
AMPAUSESTATE_HEATER_TIMEOUT,
AMPAUSESTATE_REHEATING,
AMPAUSESTATE_REHEAT_FINISHED
};
class AnycubicTFTClass {
public:
AnycubicTFTClass();
void OnSetup();
void OnCommandScan();
void OnKillTFT();
void OnSDCardStateChange(bool);
void OnSDCardError();
void OnFilamentRunout();
void OnUserConfirmRequired(const char *);
void OnPrintTimerStarted();
void OnPrintTimerPaused();
void OnPrintTimerStopped();
private:
char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE];
int TFTbuflen=0;
int TFTbufindr = 0;
int TFTbufindw = 0;
char serial3_char;
int serial3_count = 0;
char *TFTstrchr_pointer;
uint8_t SpecialMenu = false;
AnycubicMediaPrintState mediaPrintingState = AMPRINTSTATE_NOT_PRINTING;
AnycubicMediaPauseState mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
float CodeValue();
bool CodeSeen(char);
bool IsNozzleHomed();
void RenderCurrentFileList();
void RenderSpecialMenu(uint16_t);
void RenderCurrentFolder(uint16_t);
void GetCommandFromTFT();
void CheckSDCardChange();
void CheckPauseState();
void CheckPrintCompletion();
void HandleSpecialMenu();
void DoSDCardStateCheck();
void DoFilamentRunoutCheck();
void StartPrint();
void PausePrint();
void ResumePrint();
void StopPrint();
char SelectedDirectory[30];
char SelectedFile[FILENAME_LENGTH];
};
extern AnycubicTFTClass AnycubicTFT;

View File

@ -0,0 +1,104 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* extui_anycubic_tft.cpp
*/
#include "../inc/MarlinConfigPre.h"
#if BOTH(ANYCUBIC_TFT_MODEL, EXTENSIBLE_UI)
#include "extui/lib/anycubic/anycubic_tft.h"
#include "extui/ui_api.h"
#include <Arduino.h> // for the ::tone() call
namespace ExtUI {
void onStartup() { AnycubicTFT.OnSetup(); }
void onIdle() { AnycubicTFT.OnCommandScan(); }
void onPrinterKilled(PGM_P const error, PGM_P const component) { AnycubicTFT.OnKillTFT(); }
void onMediaInserted() { AnycubicTFT.OnSDCardStateChange(true); }
void onMediaError() { AnycubicTFT.OnSDCardError(); }
void onMediaRemoved() { AnycubicTFT.OnSDCardStateChange(false); }
void onPlayTone(const uint16_t frequency, const uint16_t duration) {
#if ENABLED(SPEAKER)
::tone(BEEPER_PIN, frequency, duration);
#endif
}
void onPrintTimerStarted() { AnycubicTFT.OnPrintTimerStarted(); }
void onPrintTimerPaused() { AnycubicTFT.OnPrintTimerPaused(); }
void onPrintTimerStopped() { AnycubicTFT.OnPrintTimerStopped(); }
void onFilamentRunout(const extruder_t extruder) { AnycubicTFT.OnFilamentRunout(); }
void onUserConfirmRequired(const char * const msg) { AnycubicTFT.OnUserConfirmRequired(msg); }
void onStatusChanged(const char * const msg) {}
void onFactoryReset() {}
void onStoreSettings(char *buff) {
// Called when saving to EEPROM (i.e. M500). If the ExtUI needs
// permanent data to be stored, it can write up to eeprom_data_size bytes
// into buff.
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct));
}
void onLoadSettings(const char *buff) {
// Called while loading settings from EEPROM. If the ExtUI
// needs to retrieve data, it should copy up to eeprom_data_size bytes
// from buff
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct));
}
void onConfigurationStoreWritten(bool success) {
// Called after the entire EEPROM has been written,
// whether successful or not.
}
void onConfigurationStoreRead(bool success) {
// Called after the entire EEPROM has been read,
// whether successful or not.
}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
// Called when any mesh points are updated
}
#if ENABLED(POWER_LOSS_RECOVERY)
void onPowerLossResume() {
// Called on resume from power-loss
}
#endif
#if HAS_PID_HEATING
void onPidTuning(const result_t rst) {
// Called for temperature PID tuning result
}
#endif
}
#endif // ANYCUBIC_TFT_MODEL && EXTENSIBLE_UI

View File

@ -38,15 +38,38 @@
#endif
//
// Custom Limit Switches
// Limit Switches
//
//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
#define X_MIN_PIN 3
#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
#define X_MAX_PIN 43
#define Y_MIN_PIN 19
#else
#define X_MAX_PIN 43
#endif
// Labeled pins
#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
#define Y_STOP_PIN 19
#else
#define Y_STOP_PIN 42
#endif
#define Z_STOP_PIN 18
//
// Z Probe (when not Z_MIN_PIN)
//
#define Z_MIN_PROBE_PIN 2
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 19
#endif
//
// Heaters / Fans
//
#define TG_HEATER_BED_PIN 8
#define TG_HEATER_0_PIN 10
#define TG_HEATER_1_PIN 45 // Anycubic Kossel: Unused
@ -55,6 +78,11 @@
#define TG_FAN1_PIN 7 // Anycubic Kossel: Unused
#define TG_FAN2_PIN 44 // Anycubic Kossel: Hotend fan
#define CONTROLLER_FAN_PIN TG_FAN1_PIN
#define BEEPER_PIN 31
#define SD_DETECT_PIN 49
// Remap MOSFET pins to common usages:
#define RAMPS_D10_PIN TG_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h