🧑‍💻 Add ExtUI::onLevelingDone, match DWIN to ExtUI

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -1219,6 +1219,7 @@ void unified_bed_leveling::restore_ubl_active_state_and_leave() {
     }
   #endif
   set_bed_leveling_enabled(ubl_state_at_invocation);
+  TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
 }
 
 mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() {

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -419,12 +419,13 @@ G29_TYPE GcodeSuite::G29() {
 
     planner.synchronize();
 
+    TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
+
     #if ENABLED(AUTO_BED_LEVELING_3POINT)
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> 3-point Leveling");
       points[0].z = points[1].z = points[2].z = 0;  // Probe at 3 arbitrary points
     #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
-      TERN_(EXTENSIBLE_UI, ExtUI::onMeshLevelingStart());
-      TERN_(DWIN_LCD_PROUI, DWIN_MeshLevelingStart());
+      TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_LevelingStart());
     #endif
 
     if (!faux) {
@@ -577,6 +578,7 @@ G29_TYPE GcodeSuite::G29() {
         SERIAL_ECHOLNPGM("Grid probing done.");
         // Re-enable software endstops, if needed
         SET_SOFT_ENDSTOP_LOOSE(false);
+        TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
       }
 
     #elif ENABLED(AUTO_BED_LEVELING_3POINT)
@@ -606,6 +608,8 @@ G29_TYPE GcodeSuite::G29() {
           abl.reenable = false;
         }
 
+        TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
+
       }
 
     #endif // AUTO_BED_LEVELING_3POINT
@@ -899,7 +903,7 @@ G29_TYPE GcodeSuite::G29() {
     process_subcommands_now(F(Z_PROBE_END_SCRIPT));
   #endif
 
-  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_CompletedLeveling());
+  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_LevelingDone());
 
   TERN_(HAS_MULTI_HOTEND, if (abl.tool_index != 0) tool_change(abl.tool_index));
 

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -104,8 +104,8 @@ void GcodeSuite::G29() {
       mbl_probe_index = 0;
       if (!ui.wait_for_move) {
         queue.inject(parser.seen_test('N') ? F("G28" TERN(CAN_SET_LEVELING_AFTER_G28, "L0", "") "\nG29S2") : F("G29S2"));
-        TERN_(EXTENSIBLE_UI, ExtUI::onMeshLevelingStart());
-        TERN_(DWIN_LCD_PROUI, DWIN_MeshLevelingStart());
+        TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
+        TERN_(DWIN_LCD_PROUI, DWIN_LevelingStart());
         return;
       }
       state = MeshNext;
@@ -168,6 +168,7 @@ void GcodeSuite::G29() {
         #endif
 
         TERN_(LCD_BED_LEVELING, ui.wait_for_move = false);
+        TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
       }
       break;
 

Marlin/src/gcode/calibrate/G28.cpp

@@ -239,7 +239,7 @@ void GcodeSuite::G28() {
     set_and_report_grblstate(M_HOMING);
   #endif
 
-  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_StartHoming());
+  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_HomingStart());
   TERN_(EXTENSIBLE_UI, ExtUI::onHomingStart());
 
   planner.synchronize();          // Wait for planner moves to finish!
@@ -552,8 +552,8 @@ void GcodeSuite::G28() {
 
   ui.refresh();
 
-  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_CompletedHoming());
-  TERN_(EXTENSIBLE_UI, ExtUI::onHomingComplete());
+  TERN_(HAS_DWIN_E3V2_BASIC, DWIN_HomingDone());
+  TERN_(EXTENSIBLE_UI, ExtUI::onHomingDone());
 
   report_current_position();
 

Marlin/src/gcode/sd/M1001.cpp

@@ -108,7 +108,7 @@ void GcodeSuite::M1001() {
     process_subcommands_now(F(SD_FINISHED_RELEASECOMMAND));
   #endif
 
-  TERN_(EXTENSIBLE_UI, ExtUI::onPrintFinished());
+  TERN_(EXTENSIBLE_UI, ExtUI::onPrintDone());
   TERN_(DWIN_LCD_PROUI, DWIN_Print_Finished());
 
   // Re-select the last printed file in the UI

Marlin/src/lcd/e3v2/creality/dwin.cpp

@@ -4281,7 +4281,7 @@ void DWIN_HandleScreen() {
   }
 }
 
-void DWIN_CompletedHoming() {
+void DWIN_HomingDone() {
   HMI_flag.home_flag = false;
   dwin_zoffset = TERN0(HAS_BED_PROBE, probe.offset.z);
   if (checkkey == Last_Prepare) {
@@ -4297,7 +4297,7 @@ void DWIN_CompletedHoming() {
   }
 }
 
-void DWIN_CompletedLeveling() {
+void DWIN_LevelingDone() {
   if (checkkey == Leveling) Goto_MainMenu();
 }
 

Marlin/src/lcd/e3v2/creality/dwin.h

@@ -243,7 +243,7 @@ void DWIN_HandleScreen();
 void DWIN_StatusChanged(const char * const cstr=nullptr);
 void DWIN_StatusChanged(FSTR_P const fstr);
 
-inline void DWIN_StartHoming() { HMI_flag.home_flag = true; }
+inline void DWIN_HomingStart() { HMI_flag.home_flag = true; }
 
-void DWIN_CompletedHoming();
-void DWIN_CompletedLeveling();
+void DWIN_HomingDone();
+void DWIN_LevelingDone();

Marlin/src/lcd/e3v2/proui/dwin.cpp

@@ -1542,20 +1542,20 @@ void HMI_SaveProcessID(const uint8_t id) {
   }
 }
 
-void DWIN_StartHoming() {
+void DWIN_HomingStart() {
   HMI_flag.home_flag = true;
   HMI_SaveProcessID(Homing);
   Title.ShowCaption(GET_TEXT_F(MSG_HOMING));
   DWIN_Show_Popup(ICON_BLTouch, GET_TEXT_F(MSG_HOMING), GET_TEXT_F(MSG_PLEASE_WAIT));
 }
 
-void DWIN_CompletedHoming() {
+void DWIN_HomingDone() {
   HMI_flag.home_flag = false;
   dwin_zoffset = TERN0(HAS_BED_PROBE, probe.offset.z);
   if (HMI_flag.abort_action) DWIN_Print_Aborted(); else HMI_ReturnScreen();
 }
 
-void DWIN_MeshLevelingStart() {
+void DWIN_LevelingStart() {
   #if HAS_ONESTEP_LEVELING
     HMI_SaveProcessID(Leveling);
     Title.ShowCaption(GET_TEXT_F(MSG_BED_LEVELING));
@@ -1565,7 +1565,7 @@ void DWIN_MeshLevelingStart() {
   #endif
 }
 
-void DWIN_CompletedLeveling() {
+void DWIN_LevelingDone() {
   TERN_(HAS_ONESTEP_LEVELING, if (planner.leveling_active) Goto_MeshViewer());
 }
 

Marlin/src/lcd/e3v2/proui/dwin.h

@@ -142,13 +142,13 @@ void update_variable();
 void DWIN_InitScreen();
 void DWIN_HandleScreen();
 void DWIN_CheckStatusMessage();
-void DWIN_StartHoming();
-void DWIN_CompletedHoming();
+void DWIN_HomingStart();
+void DWIN_HomingDone();
 #if HAS_MESH
   void DWIN_MeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval);
 #endif
-void DWIN_MeshLevelingStart();
-void DWIN_CompletedLeveling();
+void DWIN_LevelingStart();
+void DWIN_LevelingDone();
 void DWIN_PidTuning(pidresult_t result);
 void DWIN_Print_Started(const bool sd=false);
 void DWIN_Print_Pause();

Marlin/src/lcd/extui/anycubic_chiron/chiron_extui.cpp

@@ -58,13 +58,15 @@ namespace ExtUI {
   void onPrintTimerStarted() { Chiron.TimerEvent(AC_timer_started); }
   void onPrintTimerPaused()  { Chiron.TimerEvent(AC_timer_paused);  }
   void onPrintTimerStopped() { Chiron.TimerEvent(AC_timer_stopped); }
+  void onPrintDone() {}
+
   void onFilamentRunout(const extruder_t)            { Chiron.FilamentRunout();             }
+
   void onUserConfirmRequired(const char * const msg) { Chiron.ConfirmationRequest(msg);     }
   void onStatusChanged(const char * const msg)       { Chiron.StatusChange(msg);            }
 
   void onHomingStart() {}
-  void onHomingComplete() {}
-  void onPrintFinished() {}
+  void onHomingDone() {}
 
   void onFactoryReset() {}
 
@@ -103,7 +105,8 @@ namespace ExtUI {
   }
 
   #if HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
 
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
       // Called when any mesh points are updated

Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp

@@ -86,13 +86,23 @@ void ChironTFT::Startup() {
   TFTSer.begin(115200);
 
   // wait for the TFT panel to initialise and finish the animation
-  delay_ms(250);
+  safe_delay(1000);
 
   // There are different panels for the Chiron with slightly different commands
   // So we need to know what we are working with.
-
   // Panel type can be defined otherwise detect it automatically
-  if (panel_type == AC_panel_unknown) DetectPanelType();
+  switch (panel_type) {
+    case AC_panel_new:
+      SERIAL_ECHOLNF(AC_msg_new_panel_set);
+      break;
+    case AC_panel_standard:
+      SERIAL_ECHOLNF(AC_msg_old_panel_set);
+      break;
+    default:
+      SERIAL_ECHOLNF(AC_msg_auto_panel_detection);
+      DetectPanelType();
+      break;
+  }
 
   // Signal Board has reset
   SendtoTFTLN(AC_msg_main_board_has_reset);
@@ -358,15 +368,14 @@ bool ChironTFT::ReadTFTCommand() {
 }
 
 int8_t ChironTFT::FindToken(char c) {
-  int8_t pos = 0;
-  do {
+  for (int8_t pos = 0; pos < command_len; pos++) {
     if (panel_command[pos] == c) {
       #if ACDEBUG(AC_INFO)
         SERIAL_ECHOLNPGM("Tpos:", pos, " ", c);
       #endif
       return pos;
     }
-  } while (++pos < command_len);
+  }
   #if ACDEBUG(AC_INFO)
     SERIAL_ECHOLNPGM("Not found: ", c);
   #endif
@@ -623,18 +632,18 @@ void ChironTFT::PanelAction(uint8_t req) {
       SelectFile();
       break;
 
-    case 14: { // A14 Start Printing
+    case 14:   // A14 Start Printing
       // Allows printer to restart the job if we don't want to recover
       if (printer_state == AC_printer_resuming_from_power_outage) {
         injectCommands(F("M1000 C")); // Cancel recovery
         printer_state = AC_printer_idle;
       }
       #if ACDebugLevel >= 1
-        SERIAL_ECHOLNPAIR_F("Print: ", selectedfile);
+        SERIAL_ECHOLNPGM("Print: ", selectedfile);
       #endif
       printFile(selectedfile);
       SendtoTFTLN(AC_msg_print_from_sd_card);
-    } break;
+      break;
 
     case 15:   // A15 Resuming from outage
       if (printer_state == AC_printer_resuming_from_power_outage) {
@@ -801,25 +810,22 @@ void ChironTFT::PanelProcess(uint8_t req) {
       }
     } break;
 
-    case 30: {   // A30 Auto leveling
+    case 30:     // A30 Auto leveling
       if (FindToken('S') != -1) { // Start probing New panel adds spaces..
         // Ignore request if printing
         if (isPrinting())
           SendtoTFTLN(AC_msg_probing_not_allowed); // forbid auto leveling
         else {
-
-
           SendtoTFTLN(AC_msg_start_probing);
           injectCommands(F("G28\nG29"));
           printer_state = AC_printer_probing;
         }
       }
-      else {
+      else
         SendtoTFTLN(AC_msg_start_probing); // Just enter levelling menu
-      }
-    } break;
+      break;
 
-    case 31: { // A31 Adjust all Probe Points
+    case 31:   // A31 Adjust all Probe Points
       // The tokens can occur in different places on the new panel so we need to find it.
 
       if (FindToken('C') != -1) { // Restore and apply original offsets
@@ -907,18 +913,18 @@ void ChironTFT::PanelProcess(uint8_t req) {
           }
         }
       }
-    } break;
+      break;
 
-    case 32: { // A32 clean leveling beep flag
+    case 32:   // A32 clean leveling beep flag
       // Ignore request if printing
       //if (isPrinting()) break;
       //injectCommands(F("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000"));
       //TFTSer.println();
-    } break;
+      break;
 
     // A33 firmware info request see PanelInfo()
 
-    case 34: {  // A34 Adjust single mesh point A34 C/S X1 Y1 V123
+    case 34:    // A34 Adjust single mesh point A34 C/S X1 Y1 V123
       if (panel_command[3] == 'C') { // Restore original offsets
         injectCommands(F("M501\nM420 S1"));
         selectedmeshpoint.x = selectedmeshpoint.y = 99;
@@ -950,7 +956,7 @@ void ChironTFT::PanelProcess(uint8_t req) {
           }
         }
       }
-    }  break;
+      break;
 
     case 36:    // A36 Auto leveling for new TFT bet that was a typo in the panel code!
       SendtoTFTLN(AC_msg_start_probing);

Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp

@@ -54,8 +54,8 @@ namespace ExtUI {
   void onStatusChanged(const char * const msg) {}
 
   void onHomingStart() {}
-  void onHomingComplete() {}
-  void onPrintFinished() {}
+  void onHomingDone() {}
+  void onPrintDone() {}
 
   void onFactoryReset() {}
 
@@ -95,7 +95,8 @@ namespace ExtUI {
 
   #if HAS_MESH
 
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
 
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
       // Called when any mesh points are updated

Marlin/src/lcd/extui/dgus/dgus_extui.cpp

@@ -73,8 +73,8 @@ namespace ExtUI {
   void onStatusChanged(const char * const msg) { ScreenHandler.setstatusmessage(msg); }
 
   void onHomingStart() {}
-  void onHomingComplete() {}
-  void onPrintFinished() {}
+  void onHomingDone() {}
+  void onPrintDone() {}
 
   void onFactoryReset() {}
 
@@ -113,7 +113,8 @@ namespace ExtUI {
   }
 
   #if HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
 
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
       // Called when any mesh points are updated

Marlin/src/lcd/extui/dgus_reloaded/dgus_reloaded_extui.cpp

@@ -83,8 +83,8 @@ namespace ExtUI {
   }
 
   void onHomingStart() {}
-  void onHomingComplete() {}
-  void onPrintFinished() {}
+  void onHomingDone() {}
+  void onPrintDone() {}
 
   void onFactoryReset() {
     dgus_screen_handler.SettingsReset();
@@ -109,7 +109,8 @@ namespace ExtUI {
   }
 
   #if HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
 
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
       dgus_screen_handler.MeshUpdate(xpos, ypos);

Marlin/src/lcd/extui/example/example.cpp

@@ -59,8 +59,8 @@ namespace ExtUI {
   void onStatusChanged(const char * const msg) {}
 
   void onHomingStart() {}
-  void onHomingComplete() {}
-  void onPrintFinished() {}
+  void onHomingDone() {}
+  void onPrintDone() {}
 
   void onFactoryReset() {}
 
@@ -99,7 +99,8 @@ namespace ExtUI {
   }
 
   #if HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
 
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
       // Called when any mesh points are updated

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp

@@ -80,7 +80,7 @@ namespace ExtUI {
   }
 
   void onPrintTimerPaused() {}
-  void onPrintFinished() {}
+  void onPrintDone() {}
 
   void onFilamentRunout(const extruder_t extruder) {
     char lcd_msg[30];
@@ -90,7 +90,7 @@ namespace ExtUI {
   }
 
   void onHomingStart() {}
-  void onHomingComplete() {}
+  void onHomingDone() {}
 
   void onFactoryReset() { InterfaceSettingsScreen::defaultSettings(); }
   void onStoreSettings(char *buff) { InterfaceSettingsScreen::saveSettings(buff); }
@@ -118,7 +118,8 @@ namespace ExtUI {
   }
 
   #if HAS_LEVELING && HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
     void onMeshUpdate(const int8_t x, const int8_t y, const_float_t val) { BedMeshViewScreen::onMeshUpdate(x, y, val); }
     void onMeshUpdate(const int8_t x, const int8_t y, const ExtUI::probe_state_t state) { BedMeshViewScreen::onMeshUpdate(x, y, state); }
   #endif

Marlin/src/lcd/extui/malyan/malyan_extui.cpp

@@ -141,8 +141,8 @@ namespace ExtUI {
   void onFilamentRunout(const extruder_t extruder) {}
   void onUserConfirmRequired(const char * const) {}
   void onHomingStart() {}
-  void onHomingComplete() {}
-  void onPrintFinished() {}
+  void onHomingDone() {}
+  void onPrintDone() {}
   void onFactoryReset() {}
   void onStoreSettings(char*) {}
   void onLoadSettings(const char*) {}
@@ -151,7 +151,8 @@ namespace ExtUI {
   void onConfigurationStoreRead(bool) {}
 
   #if HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {}
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {}
   #endif

Marlin/src/lcd/extui/nextion/nextion_extui.cpp

@@ -50,8 +50,8 @@ namespace ExtUI {
   void onStatusChanged(const char * const msg)       { nextion.StatusChange(msg);        }
 
   void onHomingStart()    {}
-  void onHomingComplete() {}
-  void onPrintFinished()                             { nextion.PrintFinished(); }
+  void onHomingDone() {}
+  void onPrintDone()                             { nextion.PrintFinished(); }
 
   void onFactoryReset()   {}
 
@@ -90,7 +90,8 @@ namespace ExtUI {
   }
 
   #if HAS_MESH
-    void onMeshLevelingStart() {}
+    void onLevelingStart() {}
+    void onLevelingDone() {}
 
     void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
       // Called when any mesh points are updated

Marlin/src/lcd/extui/ui_api.h

@@ -172,7 +172,8 @@ namespace ExtUI {
       float getMeshPoint(const xy_uint8_t &pos);
       void setMeshPoint(const xy_uint8_t &pos, const_float_t zval);
       void moveToMeshPoint(const xy_uint8_t &pos, const_float_t z);
-      void onMeshLevelingStart();
+      void onLevelingStart();
+      void onLevelingDone();
       void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval);
       inline void onMeshUpdate(const xy_int8_t &pos, const_float_t zval) { onMeshUpdate(pos.x, pos.y, zval); }
 
@@ -403,14 +404,14 @@ namespace ExtUI {
   void onPrintTimerStarted();
   void onPrintTimerPaused();
   void onPrintTimerStopped();
-  void onPrintFinished();
+  void onPrintDone();
   void onFilamentRunout(const extruder_t extruder);
   void onUserConfirmRequired(const char * const msg);
   void onUserConfirmRequired(FSTR_P const fstr);
   void onStatusChanged(const char * const msg);
   void onStatusChanged(FSTR_P const fstr);
   void onHomingStart();
-  void onHomingComplete();
+  void onHomingDone();
   void onSteppersDisabled();
   void onSteppersEnabled();
   void onFactoryReset();