From 4817efcf81d353032b2873dc958ec63bcb298d19 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 12 Mar 2022 15:58:28 -0600 Subject: [PATCH] =?UTF-8?q?=F0=9F=A7=91=E2=80=8D=F0=9F=92=BB=20Add=20ExtUI?= =?UTF-8?q?::onLevelingDone,=20match=20DWIN=20to=20ExtUI?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp | 1 + Marlin/src/gcode/bedlevel/abl/G29.cpp | 10 ++-- Marlin/src/gcode/bedlevel/mbl/G29.cpp | 5 +- Marlin/src/gcode/calibrate/G28.cpp | 6 +-- Marlin/src/gcode/sd/M1001.cpp | 2 +- Marlin/src/lcd/e3v2/creality/dwin.cpp | 4 +- Marlin/src/lcd/e3v2/creality/dwin.h | 6 +-- Marlin/src/lcd/e3v2/proui/dwin.cpp | 8 ++-- Marlin/src/lcd/e3v2/proui/dwin.h | 8 ++-- .../extui/anycubic_chiron/chiron_extui.cpp | 11 +++-- .../lcd/extui/anycubic_chiron/chiron_tft.cpp | 48 +++++++++++-------- .../extui/anycubic_i3mega/anycubic_extui.cpp | 7 +-- Marlin/src/lcd/extui/dgus/dgus_extui.cpp | 7 +-- .../dgus_reloaded/dgus_reloaded_extui.cpp | 7 +-- Marlin/src/lcd/extui/example/example.cpp | 7 +-- .../ftdi_eve_touch_ui/ftdi_eve_extui.cpp | 7 +-- Marlin/src/lcd/extui/malyan/malyan_extui.cpp | 7 +-- .../src/lcd/extui/nextion/nextion_extui.cpp | 7 +-- Marlin/src/lcd/extui/ui_api.h | 7 +-- 19 files changed, 94 insertions(+), 71 deletions(-) diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index 023d0c5b1d..f62e83e070 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -1219,6 +1219,7 @@ void unified_bed_leveling::restore_ubl_active_state_and_leave() { } #endif set_bed_leveling_enabled(ubl_state_at_invocation); + TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone()); } mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() { diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp index 33f45e1c9f..1868c636ee 100644 --- a/Marlin/src/gcode/bedlevel/abl/G29.cpp +++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp @@ -419,12 +419,13 @@ G29_TYPE GcodeSuite::G29() { planner.synchronize(); + TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart()); + #if ENABLED(AUTO_BED_LEVELING_3POINT) if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> 3-point Leveling"); points[0].z = points[1].z = points[2].z = 0; // Probe at 3 arbitrary points #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) - TERN_(EXTENSIBLE_UI, ExtUI::onMeshLevelingStart()); - TERN_(DWIN_LCD_PROUI, DWIN_MeshLevelingStart()); + TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_LevelingStart()); #endif if (!faux) { @@ -577,6 +578,7 @@ G29_TYPE GcodeSuite::G29() { SERIAL_ECHOLNPGM("Grid probing done."); // Re-enable software endstops, if needed SET_SOFT_ENDSTOP_LOOSE(false); + TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone()); } #elif ENABLED(AUTO_BED_LEVELING_3POINT) @@ -606,6 +608,8 @@ G29_TYPE GcodeSuite::G29() { abl.reenable = false; } + TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone()); + } #endif // AUTO_BED_LEVELING_3POINT @@ -899,7 +903,7 @@ G29_TYPE GcodeSuite::G29() { process_subcommands_now(F(Z_PROBE_END_SCRIPT)); #endif - TERN_(HAS_DWIN_E3V2_BASIC, DWIN_CompletedLeveling()); + TERN_(HAS_DWIN_E3V2_BASIC, DWIN_LevelingDone()); TERN_(HAS_MULTI_HOTEND, if (abl.tool_index != 0) tool_change(abl.tool_index)); diff --git a/Marlin/src/gcode/bedlevel/mbl/G29.cpp b/Marlin/src/gcode/bedlevel/mbl/G29.cpp index 3767cef3cf..f262546d61 100644 --- a/Marlin/src/gcode/bedlevel/mbl/G29.cpp +++ b/Marlin/src/gcode/bedlevel/mbl/G29.cpp @@ -104,8 +104,8 @@ void GcodeSuite::G29() { mbl_probe_index = 0; if (!ui.wait_for_move) { queue.inject(parser.seen_test('N') ? F("G28" TERN(CAN_SET_LEVELING_AFTER_G28, "L0", "") "\nG29S2") : F("G29S2")); - TERN_(EXTENSIBLE_UI, ExtUI::onMeshLevelingStart()); - TERN_(DWIN_LCD_PROUI, DWIN_MeshLevelingStart()); + TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart()); + TERN_(DWIN_LCD_PROUI, DWIN_LevelingStart()); return; } state = MeshNext; @@ -168,6 +168,7 @@ void GcodeSuite::G29() { #endif TERN_(LCD_BED_LEVELING, ui.wait_for_move = false); + TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone()); } break; diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index dbbea79353..9361790d74 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -239,7 +239,7 @@ void GcodeSuite::G28() { set_and_report_grblstate(M_HOMING); #endif - TERN_(HAS_DWIN_E3V2_BASIC, DWIN_StartHoming()); + TERN_(HAS_DWIN_E3V2_BASIC, DWIN_HomingStart()); TERN_(EXTENSIBLE_UI, ExtUI::onHomingStart()); planner.synchronize(); // Wait for planner moves to finish! @@ -552,8 +552,8 @@ void GcodeSuite::G28() { ui.refresh(); - TERN_(HAS_DWIN_E3V2_BASIC, DWIN_CompletedHoming()); - TERN_(EXTENSIBLE_UI, ExtUI::onHomingComplete()); + TERN_(HAS_DWIN_E3V2_BASIC, DWIN_HomingDone()); + TERN_(EXTENSIBLE_UI, ExtUI::onHomingDone()); report_current_position(); diff --git a/Marlin/src/gcode/sd/M1001.cpp b/Marlin/src/gcode/sd/M1001.cpp index 87de89a682..197177882c 100644 --- a/Marlin/src/gcode/sd/M1001.cpp +++ b/Marlin/src/gcode/sd/M1001.cpp @@ -108,7 +108,7 @@ void GcodeSuite::M1001() { process_subcommands_now(F(SD_FINISHED_RELEASECOMMAND)); #endif - TERN_(EXTENSIBLE_UI, ExtUI::onPrintFinished()); + TERN_(EXTENSIBLE_UI, ExtUI::onPrintDone()); TERN_(DWIN_LCD_PROUI, DWIN_Print_Finished()); // Re-select the last printed file in the UI diff --git a/Marlin/src/lcd/e3v2/creality/dwin.cpp b/Marlin/src/lcd/e3v2/creality/dwin.cpp index 7dc06d00f2..05ac38d226 100644 --- a/Marlin/src/lcd/e3v2/creality/dwin.cpp +++ b/Marlin/src/lcd/e3v2/creality/dwin.cpp @@ -4281,7 +4281,7 @@ void DWIN_HandleScreen() { } } -void DWIN_CompletedHoming() { +void DWIN_HomingDone() { HMI_flag.home_flag = false; dwin_zoffset = TERN0(HAS_BED_PROBE, probe.offset.z); if (checkkey == Last_Prepare) { @@ -4297,7 +4297,7 @@ void DWIN_CompletedHoming() { } } -void DWIN_CompletedLeveling() { +void DWIN_LevelingDone() { if (checkkey == Leveling) Goto_MainMenu(); } diff --git a/Marlin/src/lcd/e3v2/creality/dwin.h b/Marlin/src/lcd/e3v2/creality/dwin.h index 3ccb70e52f..487f309ed9 100644 --- a/Marlin/src/lcd/e3v2/creality/dwin.h +++ b/Marlin/src/lcd/e3v2/creality/dwin.h @@ -243,7 +243,7 @@ void DWIN_HandleScreen(); void DWIN_StatusChanged(const char * const cstr=nullptr); void DWIN_StatusChanged(FSTR_P const fstr); -inline void DWIN_StartHoming() { HMI_flag.home_flag = true; } +inline void DWIN_HomingStart() { HMI_flag.home_flag = true; } -void DWIN_CompletedHoming(); -void DWIN_CompletedLeveling(); +void DWIN_HomingDone(); +void DWIN_LevelingDone(); diff --git a/Marlin/src/lcd/e3v2/proui/dwin.cpp b/Marlin/src/lcd/e3v2/proui/dwin.cpp index 0a392cd563..95cb0b28b9 100644 --- a/Marlin/src/lcd/e3v2/proui/dwin.cpp +++ b/Marlin/src/lcd/e3v2/proui/dwin.cpp @@ -1542,20 +1542,20 @@ void HMI_SaveProcessID(const uint8_t id) { } } -void DWIN_StartHoming() { +void DWIN_HomingStart() { HMI_flag.home_flag = true; HMI_SaveProcessID(Homing); Title.ShowCaption(GET_TEXT_F(MSG_HOMING)); DWIN_Show_Popup(ICON_BLTouch, GET_TEXT_F(MSG_HOMING), GET_TEXT_F(MSG_PLEASE_WAIT)); } -void DWIN_CompletedHoming() { +void DWIN_HomingDone() { HMI_flag.home_flag = false; dwin_zoffset = TERN0(HAS_BED_PROBE, probe.offset.z); if (HMI_flag.abort_action) DWIN_Print_Aborted(); else HMI_ReturnScreen(); } -void DWIN_MeshLevelingStart() { +void DWIN_LevelingStart() { #if HAS_ONESTEP_LEVELING HMI_SaveProcessID(Leveling); Title.ShowCaption(GET_TEXT_F(MSG_BED_LEVELING)); @@ -1565,7 +1565,7 @@ void DWIN_MeshLevelingStart() { #endif } -void DWIN_CompletedLeveling() { +void DWIN_LevelingDone() { TERN_(HAS_ONESTEP_LEVELING, if (planner.leveling_active) Goto_MeshViewer()); } diff --git a/Marlin/src/lcd/e3v2/proui/dwin.h b/Marlin/src/lcd/e3v2/proui/dwin.h index 9f49fa1825..b61ed846df 100644 --- a/Marlin/src/lcd/e3v2/proui/dwin.h +++ b/Marlin/src/lcd/e3v2/proui/dwin.h @@ -142,13 +142,13 @@ void update_variable(); void DWIN_InitScreen(); void DWIN_HandleScreen(); void DWIN_CheckStatusMessage(); -void DWIN_StartHoming(); -void DWIN_CompletedHoming(); +void DWIN_HomingStart(); +void DWIN_HomingDone(); #if HAS_MESH void DWIN_MeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval); #endif -void DWIN_MeshLevelingStart(); -void DWIN_CompletedLeveling(); +void DWIN_LevelingStart(); +void DWIN_LevelingDone(); void DWIN_PidTuning(pidresult_t result); void DWIN_Print_Started(const bool sd=false); void DWIN_Print_Pause(); diff --git a/Marlin/src/lcd/extui/anycubic_chiron/chiron_extui.cpp b/Marlin/src/lcd/extui/anycubic_chiron/chiron_extui.cpp index 7a58963c11..b9fe8f967c 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron/chiron_extui.cpp +++ b/Marlin/src/lcd/extui/anycubic_chiron/chiron_extui.cpp @@ -57,14 +57,16 @@ namespace ExtUI { void onPrintTimerStarted() { Chiron.TimerEvent(AC_timer_started); } void onPrintTimerPaused() { Chiron.TimerEvent(AC_timer_paused); } - void onPrintTimerStopped() { Chiron.TimerEvent(AC_timer_stopped); } + void onPrintTimerStopped() { Chiron.TimerEvent(AC_timer_stopped); } + void onPrintDone() {} + void onFilamentRunout(const extruder_t) { Chiron.FilamentRunout(); } + void onUserConfirmRequired(const char * const msg) { Chiron.ConfirmationRequest(msg); } void onStatusChanged(const char * const msg) { Chiron.StatusChange(msg); } void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() {} + void onHomingDone() {} void onFactoryReset() {} @@ -103,7 +105,8 @@ namespace ExtUI { } #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) { // Called when any mesh points are updated diff --git a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp index c56d8aa7fb..fac0615cd6 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp +++ b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp @@ -86,13 +86,23 @@ void ChironTFT::Startup() { TFTSer.begin(115200); // wait for the TFT panel to initialise and finish the animation - delay_ms(250); + safe_delay(1000); // There are different panels for the Chiron with slightly different commands // So we need to know what we are working with. - // Panel type can be defined otherwise detect it automatically - if (panel_type == AC_panel_unknown) DetectPanelType(); + switch (panel_type) { + case AC_panel_new: + SERIAL_ECHOLNF(AC_msg_new_panel_set); + break; + case AC_panel_standard: + SERIAL_ECHOLNF(AC_msg_old_panel_set); + break; + default: + SERIAL_ECHOLNF(AC_msg_auto_panel_detection); + DetectPanelType(); + break; + } // Signal Board has reset SendtoTFTLN(AC_msg_main_board_has_reset); @@ -358,15 +368,14 @@ bool ChironTFT::ReadTFTCommand() { } int8_t ChironTFT::FindToken(char c) { - int8_t pos = 0; - do { + for (int8_t pos = 0; pos < command_len; pos++) { if (panel_command[pos] == c) { #if ACDEBUG(AC_INFO) SERIAL_ECHOLNPGM("Tpos:", pos, " ", c); #endif return pos; } - } while (++pos < command_len); + } #if ACDEBUG(AC_INFO) SERIAL_ECHOLNPGM("Not found: ", c); #endif @@ -623,18 +632,18 @@ void ChironTFT::PanelAction(uint8_t req) { SelectFile(); break; - case 14: { // A14 Start Printing + case 14: // A14 Start Printing // Allows printer to restart the job if we don't want to recover if (printer_state == AC_printer_resuming_from_power_outage) { injectCommands(F("M1000 C")); // Cancel recovery printer_state = AC_printer_idle; } #if ACDebugLevel >= 1 - SERIAL_ECHOLNPAIR_F("Print: ", selectedfile); + SERIAL_ECHOLNPGM("Print: ", selectedfile); #endif printFile(selectedfile); SendtoTFTLN(AC_msg_print_from_sd_card); - } break; + break; case 15: // A15 Resuming from outage if (printer_state == AC_printer_resuming_from_power_outage) { @@ -801,25 +810,22 @@ void ChironTFT::PanelProcess(uint8_t req) { } } break; - case 30: { // A30 Auto leveling + case 30: // A30 Auto leveling if (FindToken('S') != -1) { // Start probing New panel adds spaces.. // Ignore request if printing if (isPrinting()) SendtoTFTLN(AC_msg_probing_not_allowed); // forbid auto leveling else { - - SendtoTFTLN(AC_msg_start_probing); injectCommands(F("G28\nG29")); printer_state = AC_printer_probing; } } - else { + else SendtoTFTLN(AC_msg_start_probing); // Just enter levelling menu - } - } break; + break; - case 31: { // A31 Adjust all Probe Points + case 31: // A31 Adjust all Probe Points // The tokens can occur in different places on the new panel so we need to find it. if (FindToken('C') != -1) { // Restore and apply original offsets @@ -907,18 +913,18 @@ void ChironTFT::PanelProcess(uint8_t req) { } } } - } break; + break; - case 32: { // A32 clean leveling beep flag + case 32: // A32 clean leveling beep flag // Ignore request if printing //if (isPrinting()) break; //injectCommands(F("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000")); //TFTSer.println(); - } break; + break; // A33 firmware info request see PanelInfo() - case 34: { // A34 Adjust single mesh point A34 C/S X1 Y1 V123 + case 34: // A34 Adjust single mesh point A34 C/S X1 Y1 V123 if (panel_command[3] == 'C') { // Restore original offsets injectCommands(F("M501\nM420 S1")); selectedmeshpoint.x = selectedmeshpoint.y = 99; @@ -950,7 +956,7 @@ void ChironTFT::PanelProcess(uint8_t req) { } } } - } break; + break; case 36: // A36 Auto leveling for new TFT bet that was a typo in the panel code! SendtoTFTLN(AC_msg_start_probing); diff --git a/Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp b/Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp index c0e1b44578..da8f4e26a0 100644 --- a/Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp +++ b/Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp @@ -54,8 +54,8 @@ namespace ExtUI { void onStatusChanged(const char * const msg) {} void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() {} + void onHomingDone() {} + void onPrintDone() {} void onFactoryReset() {} @@ -95,7 +95,8 @@ namespace ExtUI { #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) { // Called when any mesh points are updated diff --git a/Marlin/src/lcd/extui/dgus/dgus_extui.cpp b/Marlin/src/lcd/extui/dgus/dgus_extui.cpp index 04ba6b95c2..0041be8276 100644 --- a/Marlin/src/lcd/extui/dgus/dgus_extui.cpp +++ b/Marlin/src/lcd/extui/dgus/dgus_extui.cpp @@ -73,8 +73,8 @@ namespace ExtUI { void onStatusChanged(const char * const msg) { ScreenHandler.setstatusmessage(msg); } void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() {} + void onHomingDone() {} + void onPrintDone() {} void onFactoryReset() {} @@ -113,7 +113,8 @@ namespace ExtUI { } #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) { // Called when any mesh points are updated diff --git a/Marlin/src/lcd/extui/dgus_reloaded/dgus_reloaded_extui.cpp b/Marlin/src/lcd/extui/dgus_reloaded/dgus_reloaded_extui.cpp index 61b072a3f7..5c330bd6b4 100644 --- a/Marlin/src/lcd/extui/dgus_reloaded/dgus_reloaded_extui.cpp +++ b/Marlin/src/lcd/extui/dgus_reloaded/dgus_reloaded_extui.cpp @@ -83,8 +83,8 @@ namespace ExtUI { } void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() {} + void onHomingDone() {} + void onPrintDone() {} void onFactoryReset() { dgus_screen_handler.SettingsReset(); @@ -109,7 +109,8 @@ namespace ExtUI { } #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) { dgus_screen_handler.MeshUpdate(xpos, ypos); diff --git a/Marlin/src/lcd/extui/example/example.cpp b/Marlin/src/lcd/extui/example/example.cpp index 8f38d2aba6..dd0f8e401e 100644 --- a/Marlin/src/lcd/extui/example/example.cpp +++ b/Marlin/src/lcd/extui/example/example.cpp @@ -59,8 +59,8 @@ namespace ExtUI { void onStatusChanged(const char * const msg) {} void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() {} + void onHomingDone() {} + void onPrintDone() {} void onFactoryReset() {} @@ -99,7 +99,8 @@ namespace ExtUI { } #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) { // Called when any mesh points are updated diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp index f2ee1e5639..1c7b3621f2 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp @@ -80,7 +80,7 @@ namespace ExtUI { } void onPrintTimerPaused() {} - void onPrintFinished() {} + void onPrintDone() {} void onFilamentRunout(const extruder_t extruder) { char lcd_msg[30]; @@ -90,7 +90,7 @@ namespace ExtUI { } void onHomingStart() {} - void onHomingComplete() {} + void onHomingDone() {} void onFactoryReset() { InterfaceSettingsScreen::defaultSettings(); } void onStoreSettings(char *buff) { InterfaceSettingsScreen::saveSettings(buff); } @@ -118,7 +118,8 @@ namespace ExtUI { } #if HAS_LEVELING && HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t x, const int8_t y, const_float_t val) { BedMeshViewScreen::onMeshUpdate(x, y, val); } void onMeshUpdate(const int8_t x, const int8_t y, const ExtUI::probe_state_t state) { BedMeshViewScreen::onMeshUpdate(x, y, state); } #endif diff --git a/Marlin/src/lcd/extui/malyan/malyan_extui.cpp b/Marlin/src/lcd/extui/malyan/malyan_extui.cpp index f323728e27..2d36a4e737 100644 --- a/Marlin/src/lcd/extui/malyan/malyan_extui.cpp +++ b/Marlin/src/lcd/extui/malyan/malyan_extui.cpp @@ -141,8 +141,8 @@ namespace ExtUI { void onFilamentRunout(const extruder_t extruder) {} void onUserConfirmRequired(const char * const) {} void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() {} + void onHomingDone() {} + void onPrintDone() {} void onFactoryReset() {} void onStoreSettings(char*) {} void onLoadSettings(const char*) {} @@ -151,7 +151,8 @@ namespace ExtUI { void onConfigurationStoreRead(bool) {} #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {} #endif diff --git a/Marlin/src/lcd/extui/nextion/nextion_extui.cpp b/Marlin/src/lcd/extui/nextion/nextion_extui.cpp index c19d3aee46..c15175a28d 100644 --- a/Marlin/src/lcd/extui/nextion/nextion_extui.cpp +++ b/Marlin/src/lcd/extui/nextion/nextion_extui.cpp @@ -50,8 +50,8 @@ namespace ExtUI { void onStatusChanged(const char * const msg) { nextion.StatusChange(msg); } void onHomingStart() {} - void onHomingComplete() {} - void onPrintFinished() { nextion.PrintFinished(); } + void onHomingDone() {} + void onPrintDone() { nextion.PrintFinished(); } void onFactoryReset() {} @@ -90,7 +90,8 @@ namespace ExtUI { } #if HAS_MESH - void onMeshLevelingStart() {} + void onLevelingStart() {} + void onLevelingDone() {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { // Called when any mesh points are updated diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h index 6753c53740..b575684a03 100644 --- a/Marlin/src/lcd/extui/ui_api.h +++ b/Marlin/src/lcd/extui/ui_api.h @@ -172,7 +172,8 @@ namespace ExtUI { float getMeshPoint(const xy_uint8_t &pos); void setMeshPoint(const xy_uint8_t &pos, const_float_t zval); void moveToMeshPoint(const xy_uint8_t &pos, const_float_t z); - void onMeshLevelingStart(); + void onLevelingStart(); + void onLevelingDone(); void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval); inline void onMeshUpdate(const xy_int8_t &pos, const_float_t zval) { onMeshUpdate(pos.x, pos.y, zval); } @@ -403,14 +404,14 @@ namespace ExtUI { void onPrintTimerStarted(); void onPrintTimerPaused(); void onPrintTimerStopped(); - void onPrintFinished(); + void onPrintDone(); void onFilamentRunout(const extruder_t extruder); void onUserConfirmRequired(const char * const msg); void onUserConfirmRequired(FSTR_P const fstr); void onStatusChanged(const char * const msg); void onStatusChanged(FSTR_P const fstr); void onHomingStart(); - void onHomingComplete(); + void onHomingDone(); void onSteppersDisabled(); void onSteppersEnabled(); void onFactoryReset();