Wanhao Duplicator i3 Mini support (#14559)

This commit is contained in:
thisiskeithb 2019-07-11 02:36:51 -07:00 committed by Scott Lahteine
parent 340d827dc1
commit 42be684e69
6 changed files with 4847 additions and 0 deletions

View File

@ -307,6 +307,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1316)
else ifeq ($(HARDWARE_MOTHERBOARD),1317)
# Einstart retrofit
else ifeq ($(HARDWARE_MOTHERBOARD),1318)
# Wanhao 0ne+ i3 Mini
else ifeq ($(HARDWARE_MOTHERBOARD),1319)
#
# ATmega1281, ATmega2561

View File

@ -128,6 +128,7 @@
#define BOARD_GT2560_V3_MC2 1316 // Geeetech GT2560 Rev B for Mecreator2
#define BOARD_GT2560_V3_A20 1317 // Geeetech GT2560 Rev B for A20(M/D)
#define BOARD_EINSTART_S 1318 // Einstart retrofit
#define BOARD_WANHAO_ONEPLUS 1319 // Wanhao 0ne+ i3 Mini
//
// ATmega1281, ATmega2561

View File

@ -0,0 +1,112 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Wanhao 0ne+ pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Wanhao i3 Mini 0ne+"
#define DEFAULT_MACHINE_NAME "i3 Mini"
#define BOARD_WEBSITE_URL "https://tinyurl.com/yyxw7se7"
//
// Limit Switches
//
#define X_STOP_PIN 19
#define Y_STOP_PIN 18
#define Z_STOP_PIN 38
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 38
#endif
//
// Steppers
//
#define X_STEP_PIN 22
#define X_DIR_PIN 23
#define X_ENABLE_PIN 57
#define Y_STEP_PIN 25
#define Y_DIR_PIN 26
#define Y_ENABLE_PIN 24
#define Z_STEP_PIN 29
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 28
#define E0_STEP_PIN 55
#define E0_DIR_PIN 56
#define E0_ENABLE_PIN 54
//
// Temperature Sensors
//
#define TEMP_0_PIN 13
#define TEMP_BED_PIN 14
//
// Heaters / Fans
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 44
#define FAN_PIN 12 // IO pin. Buffer needed
//
// SD Card
//
#define SD_DETECT_PIN -1
#define SDPOWER -1
#define SDSS 53
//
// Misc. Functions
//
#define BEEPER_PIN 37
#define KILL_PIN 64
//
// LCD / Controller
//
#if HAS_SPI_LCD
#define DOGLCD_A0 40
#define DOGLCD_CS 41
#define LCD_BACKLIGHT_PIN 65 // Backlight LED on A11/D65
#define LCD_RESET_PIN 27
#define LCD_CONTRAST 255
#if ENABLED(NEWPANEL)
#define BTN_EN1 2
#define BTN_EN2 3
#define BTN_ENC 5
#endif
#endif

View File

@ -228,6 +228,8 @@
#include "mega/pins_GT2560_V3_A20.h" // ATmega2560 env:megaatmega2560
#elif MB(EINSTART_S)
#include "mega/pins_EINSTART-S.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(WANHAO_ONEPLUS)
#include "mega/pins_WANHAO_ONEPLUS.h" // ATmega2560 env:megaatmega2560
//
// ATmega1281, ATmega2561

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff