Keith Bennett
committed by
Scott Lahteine
Scott Lahteine
parent
72c28d3462
commit
40a9d82ae9
527
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_0.h
Normal file
527
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_0.h
Normal file
@@ -0,0 +1,527 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "BTT OCTOPUS V1.0"
|
||||
#endif
|
||||
|
||||
// Onboard I2C EEPROM
|
||||
#define I2C_EEPROM
|
||||
#define MARLIN_EEPROM_SIZE 0x8000 // 32KB (24C32A)
|
||||
#define I2C_SCL_PIN PB8
|
||||
#define I2C_SDA_PIN PB9
|
||||
|
||||
// USB Flash Drive support
|
||||
#define HAS_OTG_USB_HOST_SUPPORT
|
||||
|
||||
// Avoid conflict with TIMER_TONE
|
||||
#define STEP_TIMER 10
|
||||
|
||||
//
|
||||
// Servos
|
||||
#define SERVO0_PIN PB6
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define LED_PIN PA13
|
||||
|
||||
//
|
||||
// Trinamic Stallguard pins
|
||||
//
|
||||
#define X_DIAG_PIN PG6 // X-STOP
|
||||
#define Y_DIAG_PIN PG9 // Y-STOP
|
||||
#define Z_DIAG_PIN PG10 // Z-STOP
|
||||
#define Z2_DIAG_PIN PG11 // Z2-STOP
|
||||
#define E0_DIAG_PIN PG12 // E0DET
|
||||
#define E1_DIAG_PIN PG13 // E1DET
|
||||
#define E2_DIAG_PIN PG14 // E2DET
|
||||
#define E3_DIAG_PIN PG15 // E3DET
|
||||
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PB7
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#ifdef X_STALL_SENSITIVITY
|
||||
#define X_STOP_PIN X_DIAG_PIN
|
||||
#if X_HOME_DIR < 0
|
||||
#define X_MAX_PIN E0_DIAG_PIN // E0DET
|
||||
#else
|
||||
#define X_MIN_PIN E0_DIAG_PIN // E0DET
|
||||
#endif
|
||||
#elif ENABLED(X_DUAL_ENDSTOPS)
|
||||
#ifndef X_MIN_PIN
|
||||
#define X_MIN_PIN X_DIAG_PIN // X-STOP
|
||||
#endif
|
||||
#ifndef X_MAX_PIN
|
||||
#define X_MAX_PIN E0_DIAG_PIN // E0DET
|
||||
#endif
|
||||
#else
|
||||
#define X_STOP_PIN X_DIAG_PIN // X-STOP
|
||||
#endif
|
||||
|
||||
#ifdef Y_STALL_SENSITIVITY
|
||||
#define Y_STOP_PIN Y_DIAG_PIN
|
||||
#if Y_HOME_DIR < 0
|
||||
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
|
||||
#else
|
||||
#define Y_MIN_PIN E1_DIAG_PIN // E1DET
|
||||
#endif
|
||||
#elif ENABLED(Y_DUAL_ENDSTOPS)
|
||||
#ifndef Y_MIN_PIN
|
||||
#define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
|
||||
#endif
|
||||
#ifndef Y_MAX_PIN
|
||||
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
|
||||
#endif
|
||||
#else
|
||||
#define Y_STOP_PIN Y_DIAG_PIN // Y-STOP
|
||||
#endif
|
||||
|
||||
#ifdef Z_STALL_SENSITIVITY
|
||||
#define Z_STOP_PIN Z_DIAG_PIN
|
||||
#if Z_HOME_DIR < 0
|
||||
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
|
||||
#else
|
||||
#define Z_MIN_PIN E2_DIAG_PIN // PWRDET
|
||||
#endif
|
||||
#elif ENABLED(Z_MULTI_ENDSTOPS)
|
||||
#ifndef Z_MIN_PIN
|
||||
#define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
|
||||
#endif
|
||||
#ifndef Z_MAX_PIN
|
||||
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
|
||||
#endif
|
||||
#else
|
||||
#define Z_STOP_PIN Z_DIAG_PIN // Z-STOP
|
||||
#endif
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#define FIL_RUNOUT_PIN PG12 // E0DET
|
||||
#define FIL_RUNOUT2_PIN PG13 // E1DET
|
||||
#define FIL_RUNOUT3_PIN PG14 // E2DET
|
||||
#define FIL_RUNOUT4_PIN PG15 // E3DET
|
||||
|
||||
//
|
||||
// Power Supply Control
|
||||
//
|
||||
#ifndef PS_ON_PIN
|
||||
#define PS_ON_PIN PE11 // PS-ON
|
||||
#endif
|
||||
|
||||
//
|
||||
// Power Loss Detection
|
||||
//
|
||||
#ifndef POWER_LOSS_PIN
|
||||
#define POWER_LOSS_PIN PC0 // PWRDET
|
||||
#endif
|
||||
|
||||
//
|
||||
// NeoPixel LED
|
||||
//
|
||||
#ifndef NEOPIXEL_PIN
|
||||
#define NEOPIXEL_PIN PB0
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PF13 // MOTOR 0
|
||||
#define X_DIR_PIN PF12
|
||||
#define X_ENABLE_PIN PF14
|
||||
#ifndef X_CS_PIN
|
||||
#define X_CS_PIN PC4
|
||||
#endif
|
||||
|
||||
#define Y_STEP_PIN PG0 // MOTOR 1
|
||||
#define Y_DIR_PIN PG1
|
||||
#define Y_ENABLE_PIN PF15
|
||||
#ifndef Y_CS_PIN
|
||||
#define Y_CS_PIN PD11
|
||||
#endif
|
||||
|
||||
#define Z_STEP_PIN PF11 // MOTOR 2
|
||||
#define Z_DIR_PIN PG3
|
||||
#define Z_ENABLE_PIN PG5
|
||||
#ifndef Z_CS_PIN
|
||||
#define Z_CS_PIN PC6
|
||||
#endif
|
||||
|
||||
#define Z2_STEP_PIN PG4 // MOTOR 3
|
||||
#define Z2_DIR_PIN PC1
|
||||
#define Z2_ENABLE_PIN PA0
|
||||
#ifndef Z2_CS_PIN
|
||||
#define Z2_CS_PIN PC7
|
||||
#endif
|
||||
|
||||
#define E0_STEP_PIN PF9 // MOTOR 4
|
||||
#define E0_DIR_PIN PF10
|
||||
#define E0_ENABLE_PIN PG2
|
||||
#ifndef E0_CS_PIN
|
||||
#define E0_CS_PIN PF2
|
||||
#endif
|
||||
|
||||
#define E1_STEP_PIN PC13 // MOTOR 5
|
||||
#define E1_DIR_PIN PF0
|
||||
#define E1_ENABLE_PIN PF1
|
||||
#ifndef E1_CS_PIN
|
||||
#define E1_CS_PIN PE4
|
||||
#endif
|
||||
|
||||
#define E2_STEP_PIN PE2 // MOTOR 6
|
||||
#define E2_DIR_PIN PE3
|
||||
#define E2_ENABLE_PIN PD4
|
||||
#ifndef E2_CS_PIN
|
||||
|
||||
#define E2_CS_PIN PE1
|
||||
#endif
|
||||
|
||||
#define E3_STEP_PIN PE6 // MOTOR 7
|
||||
#define E3_DIR_PIN PA14
|
||||
#define E3_ENABLE_PIN PE0
|
||||
#ifndef E3_CS_PIN
|
||||
#define E3_CS_PIN PD3
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PF3 // TB
|
||||
#if TEMP_SENSOR_0 == 20
|
||||
#define TEMP_0_PIN PF8 // PT100 Connector
|
||||
#else
|
||||
#define TEMP_0_PIN PF4 // TH0
|
||||
#endif
|
||||
#define TEMP_1_PIN PF5 // TH1
|
||||
#define TEMP_2_PIN PF6 // TH2
|
||||
#define TEMP_3_PIN PF7 // TH3
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_BED_PIN PA1 // Hotbed
|
||||
#define HEATER_0_PIN PA2 // Heater0
|
||||
#define HEATER_1_PIN PA3 // Heater1
|
||||
#define HEATER_2_PIN PB10 // Heater2
|
||||
#define HEATER_3_PIN PB11 // Heater3
|
||||
|
||||
#define FAN_PIN PA8 // Fan0
|
||||
#define FAN1_PIN PE5 // Fan1
|
||||
#define FAN2_PIN PD12 // Fan2
|
||||
#define FAN3_PIN PD13 // Fan3
|
||||
#define FAN4_PIN PD14 // Fan4
|
||||
#define FAN5_PIN PD15 // Fan5
|
||||
|
||||
//
|
||||
// SD Support
|
||||
//
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#if HAS_WIRED_LCD
|
||||
#define SDCARD_CONNECTION LCD
|
||||
#else
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Software SPI pins for TMC2130 stepper drivers
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#ifndef TMC_SW_MOSI
|
||||
#define TMC_SW_MOSI PA7
|
||||
#endif
|
||||
#ifndef TMC_SW_MISO
|
||||
#define TMC_SW_MISO PA6
|
||||
#endif
|
||||
#ifndef TMC_SW_SCK
|
||||
#define TMC_SW_SCK PA5
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TMC_UART
|
||||
/**
|
||||
* TMC2208/TMC2209 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
//#define X_HARDWARE_SERIAL Serial1
|
||||
//#define X2_HARDWARE_SERIAL Serial1
|
||||
//#define Y_HARDWARE_SERIAL Serial1
|
||||
//#define Y2_HARDWARE_SERIAL Serial1
|
||||
//#define Z_HARDWARE_SERIAL Serial1
|
||||
//#define Z2_HARDWARE_SERIAL Serial1
|
||||
//#define E0_HARDWARE_SERIAL Serial1
|
||||
//#define E1_HARDWARE_SERIAL Serial1
|
||||
//#define E2_HARDWARE_SERIAL Serial1
|
||||
//#define E3_HARDWARE_SERIAL Serial1
|
||||
//#define E4_HARDWARE_SERIAL Serial1
|
||||
|
||||
//
|
||||
// Software serial
|
||||
//
|
||||
#define X_SERIAL_TX_PIN PC4
|
||||
#define X_SERIAL_RX_PIN PC4
|
||||
|
||||
#define Y_SERIAL_TX_PIN PD11
|
||||
#define Y_SERIAL_RX_PIN PD11
|
||||
|
||||
#define Z_SERIAL_TX_PIN PC6
|
||||
#define Z_SERIAL_RX_PIN PC6
|
||||
|
||||
#define Z2_SERIAL_TX_PIN PC7
|
||||
#define Z2_SERIAL_RX_PIN PC7
|
||||
|
||||
#define E0_SERIAL_TX_PIN PF2
|
||||
#define E0_SERIAL_RX_PIN PF2
|
||||
|
||||
#define E1_SERIAL_TX_PIN PE4
|
||||
#define E1_SERIAL_RX_PIN PE4
|
||||
|
||||
#define E2_SERIAL_TX_PIN PE1
|
||||
#define E2_SERIAL_RX_PIN PE1
|
||||
|
||||
#define E3_SERIAL_TX_PIN PD3
|
||||
#define E3_SERIAL_RX_PIN PD3
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#endif
|
||||
|
||||
/**
|
||||
* ______ ______
|
||||
* NC | 1 2 | GND 5V | 1 2 | GND
|
||||
* RESET | 3 4 | PC15 (SD_DETECT) (LCD_D7) PE15 | 3 4 | PE14 (LCD_D6)
|
||||
* (MOSI) PA7 | 5 6 PB1 (BTN_EN2) (LCD_D5) PE13 | 5 6 PE12 (LCD_D4)
|
||||
* (SD_SS) PA4 | 7 8 | PB2 (BTN_EN1) (LCD_RS) PE10 | 7 8 | PE9 (LCD_EN)
|
||||
* (SCK) PA5 | 9 10 | PA6 (MISO) (BTN_ENC) PE7 | 9 10 | PE8 (BEEPER)
|
||||
* ------ -----
|
||||
* EXP2 EXP1
|
||||
*/
|
||||
|
||||
#define EXP1_03_PIN PE15
|
||||
#define EXP1_04_PIN PE14
|
||||
#define EXP1_05_PIN PE13
|
||||
#define EXP1_06_PIN PE12
|
||||
#define EXP1_07_PIN PE10
|
||||
#define EXP1_08_PIN PE9
|
||||
#define EXP1_09_PIN PE7
|
||||
#define EXP1_10_PIN PE8
|
||||
|
||||
#define EXP2_03_PIN -1
|
||||
#define EXP2_04_PIN PC15
|
||||
#define EXP2_05_PIN PA7
|
||||
#define EXP2_06_PIN PB2
|
||||
#define EXP2_07_PIN PA4
|
||||
#define EXP2_08_PIN PB1
|
||||
#define EXP2_09_PIN PA5
|
||||
#define EXP2_10_PIN PA6
|
||||
|
||||
//
|
||||
// Onboard SD card
|
||||
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
|
||||
//
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
#undef SD_DETECT_STATE
|
||||
#define SD_DETECT_STATE HIGH
|
||||
#define SD_DETECT_PIN PC14
|
||||
#elif SD_CONNECTION_IS(LCD)
|
||||
|
||||
#define CUSTOM_SPI_PINS
|
||||
#define SDSS PA4
|
||||
#define SD_SS_PIN SDSS
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
#define SD_DETECT_PIN PC15
|
||||
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board"
|
||||
#endif
|
||||
|
||||
#if ENABLED(BTT_MOTOR_EXPANSION)
|
||||
/**
|
||||
* ______ ______
|
||||
* NC | 1 2 | GND NC | 1 2 | GND
|
||||
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
|
||||
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG
|
||||
* M2DIR | 7 8 | M2STP M2RX | 7 8 | M2DIAG
|
||||
* M3DIR | 9 10 | M3STP M3RX | 9 10 | M3DIAG
|
||||
* ------ ------
|
||||
* EXP2 EXP1
|
||||
*/
|
||||
|
||||
// M1 on Driver Expansion Module
|
||||
#define E4_STEP_PIN EXP2_05_PIN
|
||||
#define E4_DIR_PIN EXP2_06_PIN
|
||||
#define E4_ENABLE_PIN EXP2_04_PIN
|
||||
#define E4_DIAG_PIN EXP1_06_PIN
|
||||
#define E4_CS_PIN EXP1_05_PIN
|
||||
#if HAS_TMC_UART
|
||||
#define E4_SERIAL_TX_PIN EXP1_05_PIN
|
||||
#define E4_SERIAL_RX_PIN EXP1_05_PIN
|
||||
#endif
|
||||
|
||||
// M2 on Driver Expansion Module
|
||||
#define E5_STEP_PIN EXP2_08_PIN
|
||||
#define E5_DIR_PIN EXP2_07_PIN
|
||||
#define E5_ENABLE_PIN EXP1_03_PIN
|
||||
#define E5_DIAG_PIN EXP1_08_PIN
|
||||
#define E5_CS_PIN EXP1_07_PIN
|
||||
#if HAS_TMC_UART
|
||||
#define E5_SERIAL_TX_PIN EXP1_07_PIN
|
||||
#define E5_SERIAL_RX_PIN EXP1_07_PIN
|
||||
#endif
|
||||
|
||||
// M3 on Driver Expansion Module
|
||||
#define E6_STEP_PIN EXP2_10_PIN
|
||||
#define E6_DIR_PIN EXP2_09_PIN
|
||||
#define E6_ENABLE_PIN EXP1_04_PIN
|
||||
#define E6_DIAG_PIN EXP1_10_PIN
|
||||
#define E6_CS_PIN EXP1_09_PIN
|
||||
#if HAS_TMC_UART
|
||||
#define E6_SERIAL_TX_PIN EXP1_09_PIN
|
||||
#define E6_SERIAL_RX_PIN EXP1_09_PIN
|
||||
#endif
|
||||
|
||||
#endif // BTT_MOTOR_EXPANSION
|
||||
|
||||
//
|
||||
// LCDs and Controllers
|
||||
//
|
||||
#if IS_TFTGLCD_PANEL
|
||||
|
||||
#if ENABLED(TFTGLCD_PANEL_SPI)
|
||||
#define TFTGLCD_CS EXP2_08_PIN
|
||||
#endif
|
||||
|
||||
#elif HAS_WIRED_LCD
|
||||
|
||||
#define BEEPER_PIN EXP1_10_PIN
|
||||
#define BTN_ENC EXP1_09_PIN
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
|
||||
#define LCD_PINS_RS EXP1_04_PIN
|
||||
|
||||
#define BTN_EN1 EXP1_08_PIN
|
||||
#define BTN_EN2 EXP1_06_PIN
|
||||
|
||||
#define LCD_PINS_ENABLE EXP1_03_PIN
|
||||
#define LCD_PINS_D4 EXP1_05_PIN
|
||||
|
||||
// CR10_STOCKDISPLAY default timing is too fast
|
||||
#undef BOARD_ST7920_DELAY_1
|
||||
#undef BOARD_ST7920_DELAY_2
|
||||
#undef BOARD_ST7920_DELAY_3
|
||||
|
||||
#else
|
||||
|
||||
#define LCD_PINS_RS EXP1_07_PIN
|
||||
|
||||
#define BTN_EN1 EXP2_08_PIN
|
||||
#define BTN_EN2 EXP2_06_PIN
|
||||
|
||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864)
|
||||
#define DOGLCD_CS EXP1_08_PIN
|
||||
#define DOGLCD_A0 EXP1_07_PIN
|
||||
//#define LCD_BACKLIGHT_PIN -1
|
||||
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
|
||||
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN EXP1_05_PIN
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN EXP1_04_PIN
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN EXP1_03_PIN
|
||||
#endif
|
||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||
#define NEOPIXEL_PIN EXP1_05_PIN
|
||||
#endif
|
||||
#endif // !FYSETC_MINI_12864
|
||||
|
||||
#if IS_ULTIPANEL
|
||||
#define LCD_PINS_D5 EXP1_05_PIN
|
||||
#define LCD_PINS_D6 EXP1_04_PIN
|
||||
#define LCD_PINS_D7 EXP1_03_PIN
|
||||
|
||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
#endif // HAS_WIRED_LCD
|
||||
|
||||
// Alter timing for graphical display
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
#ifndef BOARD_ST7920_DELAY_1
|
||||
#define BOARD_ST7920_DELAY_1 DELAY_NS(120) // DELAY_NS(96)
|
||||
#endif
|
||||
#ifndef BOARD_ST7920_DELAY_2
|
||||
#define BOARD_ST7920_DELAY_2 DELAY_NS(80) // DELAY_NS(48)
|
||||
#endif
|
||||
#ifndef BOARD_ST7920_DELAY_3
|
||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(580) // DELAY_NS(600)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// WIFI
|
||||
//
|
||||
|
||||
/**
|
||||
* -------
|
||||
* GND | 9 | | 8 | 3.3V
|
||||
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
|
||||
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
|
||||
* (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
|
||||
* (ESP-IO4) PD10 | 13 | | 4 | NC
|
||||
* NC | 14 | | 3 | PE15 (ESP-EN)
|
||||
* (ESP-RX) PD8 | 15 | | 2 | NC
|
||||
* (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
|
||||
* -------
|
||||
* WIFI
|
||||
*/
|
||||
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
|
||||
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
|
||||
#define ESP_WIFI_MODULE_RESET_PIN PG7
|
||||
#define ESP_WIFI_MODULE_ENABLE_PIN PG8
|
||||
#define ESP_WIFI_MODULE_GPIO0_PIN PD7
|
||||
#define ESP_WIFI_MODULE_GPIO4_PIN PD10
|
||||
Reference in New Issue
Block a user