BigTreeTech Octopus (STM32F446ZET6) (#21826, #21882, #21883, #21901)

This commit is contained in:
Keith Bennett 2021-05-12 01:26:19 -07:00 committed by Scott Lahteine
parent 72c28d3462
commit 40a9d82ae9
11 changed files with 1723 additions and 17 deletions

View File

@ -370,20 +370,22 @@
#define BOARD_BTT_SKR_V2_0_REV_A 4211 // BigTreeTech SKR v2.0 Rev A (STM32F407VGT6)
#define BOARD_BTT_SKR_V2_0_REV_B 4212 // BigTreeTech SKR v2.0 Rev B (STM32F407VGT6)
#define BOARD_BTT_GTR_V1_0 4213 // BigTreeTech GTR v1.0 (STM32F407IGT)
#define BOARD_LERDGE_K 4214 // Lerdge K (STM32F407ZG)
#define BOARD_LERDGE_S 4215 // Lerdge S (STM32F407VE)
#define BOARD_LERDGE_X 4216 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 4217 // VAkE 403D (STM32F446VET6)
#define BOARD_FYSETC_S6 4218 // FYSETC S6 (STM32F446VET6)
#define BOARD_FYSETC_S6_V2_0 4219 // FYSETC S6 v2.0 (STM32F446VET6)
#define BOARD_FYSETC_SPIDER 4220 // FYSETC Spider (STM32F446VET6)
#define BOARD_FLYF407ZG 4221 // FLYF407ZG (STM32F407ZG)
#define BOARD_MKS_ROBIN2 4222 // MKS_ROBIN2 (STM32F407ZE)
#define BOARD_MKS_ROBIN_PRO_V2 4223 // MKS Robin Pro V2 (STM32F407VE)
#define BOARD_MKS_ROBIN_NANO_V3 4224 // MKS Robin Nano V3 (STM32F407VG)
#define BOARD_ANET_ET4 4225 // ANET ET4 V1.x (STM32F407VGT6)
#define BOARD_ANET_ET4P 4226 // ANET ET4P V1.x (STM32F407VGT6)
#define BOARD_FYSETC_CHEETAH_V20 4227 // FYSETC Cheetah V2.0
#define BOARD_BTT_OCTOPUS_V1_0 4214 // BigTreeTech Octopus v1.0 (STM32F446ZET6)
#define BOARD_LERDGE_K 4215 // Lerdge K (STM32F407ZG)
#define BOARD_LERDGE_S 4216 // Lerdge S (STM32F407VE)
#define BOARD_LERDGE_X 4217 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 4218 // VAkE 403D (STM32F446VET6)
#define BOARD_FYSETC_S6 4219 // FYSETC S6 (STM32F446VET6)
#define BOARD_FYSETC_S6_V2_0 4220 // FYSETC S6 v2.0 (STM32F446VET6)
#define BOARD_FYSETC_SPIDER 4221 // FYSETC Spider (STM32F446VET6)
#define BOARD_FLYF407ZG 4222 // FLYF407ZG (STM32F407ZG)
#define BOARD_MKS_ROBIN2 4223 // MKS_ROBIN2 (STM32F407ZE)
#define BOARD_MKS_ROBIN_PRO_V2 4224 // MKS Robin Pro V2 (STM32F407VE)
#define BOARD_MKS_ROBIN_NANO_V3 4225 // MKS Robin Nano V3 (STM32F407VG)
#define BOARD_ANET_ET4 4226 // ANET ET4 V1.x (STM32F407VGT6)
#define BOARD_ANET_ET4P 4227 // ANET ET4P V1.x (STM32F407VGT6)
#define BOARD_FYSETC_CHEETAH_V20 4228 // FYSETC Cheetah V2.0
//
// ARM Cortex M7

View File

@ -600,6 +600,8 @@
#include "stm32f4/pins_BTT_SKR_V2_0_REV_A.h" // STM32F4 env:BIGTREE_SKR_2
#elif MB(BTT_SKR_V2_0_REV_B)
#include "stm32f4/pins_BTT_SKR_V2_0_REV_B.h" // STM32F4 env:BIGTREE_SKR_2
#elif MB(BTT_OCTOPUS_V1_0)
#include "stm32f4/pins_BTT_OCTOPUS_V1_0.h" // STM32F4 env:BIGTREE_OCTOPUS_V1_0 env:BIGTREE_OCTOPUS_V1_0_USB
#elif MB(LERDGE_K)
#include "stm32f4/pins_LERDGE_K.h" // STM32F4 env:LERDGEK env:LERDGEK_usb_flash_drive
#elif MB(LERDGE_S)
@ -722,7 +724,7 @@
#error "BOARD_BIQU_SKR_V1_1 has been renamed BOARD_BTT_SKR_V1_1. Please update your configuration."
#elif MB(BIGTREE_SKR_V1_1)
#error "BOARD_BIGTREE_SKR_V1_1 has been renamed BOARD_BTT_SKR_V1_1. Please update your configuration."
#elif MB(BIGTREE_SKR_V2_2)
#elif MB(BIGTREE_SKR_V1_2)
#error "BOARD_BIGTREE_SKR_V1_2 has been renamed BOARD_BTT_SKR_V1_2. Please update your configuration."
#elif MB(BIGTREE_SKR_V1_3)
#error "BOARD_BIGTREE_SKR_V1_3 has been renamed BOARD_BTT_SKR_V1_3. Please update your configuration."
@ -757,7 +759,7 @@
#elif MB(RAMPS_LONGER3D_LK4PRO)
#error "BOARD_RAMPS_LONGER3D_LK4PRO is now BOARD_LONGER3D_LKx_PRO. Please update your configuration."
#elif MB(BTT_SKR_V2_0)
#error "BTT_SKR_V2_0 is now BTT_SKR_V2_0_REV_A or BTT_SKR_V2_0_REV_B. Please update your configuration."
#error "BTT_SKR_V2_0 is now BTT_SKR_V2_0_REV_A or BTT_SKR_V2_0_REV_B. See https://bit.ly/3t5d9JQ for more information. Please update your configuration."
#else
#error "Unknown MOTHERBOARD value set in Configuration.h"
#endif

View File

@ -0,0 +1,527 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "env_validate.h"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BTT OCTOPUS V1.0"
#endif
// Onboard I2C EEPROM
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x8000 // 32KB (24C32A)
#define I2C_SCL_PIN PB8
#define I2C_SDA_PIN PB9
// USB Flash Drive support
#define HAS_OTG_USB_HOST_SUPPORT
// Avoid conflict with TIMER_TONE
#define STEP_TIMER 10
//
// Servos
#define SERVO0_PIN PB6
//
// Misc. Functions
//
#define LED_PIN PA13
//
// Trinamic Stallguard pins
//
#define X_DIAG_PIN PG6 // X-STOP
#define Y_DIAG_PIN PG9 // Y-STOP
#define Z_DIAG_PIN PG10 // Z-STOP
#define Z2_DIAG_PIN PG11 // Z2-STOP
#define E0_DIAG_PIN PG12 // E0DET
#define E1_DIAG_PIN PG13 // E1DET
#define E2_DIAG_PIN PG14 // E2DET
#define E3_DIAG_PIN PG15 // E3DET
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PB7
#endif
//
// Limit Switches
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#define X_MAX_PIN E0_DIAG_PIN // E0DET
#else
#define X_MIN_PIN E0_DIAG_PIN // E0DET
#endif
#elif ENABLED(X_DUAL_ENDSTOPS)
#ifndef X_MIN_PIN
#define X_MIN_PIN X_DIAG_PIN // X-STOP
#endif
#ifndef X_MAX_PIN
#define X_MAX_PIN E0_DIAG_PIN // E0DET
#endif
#else
#define X_STOP_PIN X_DIAG_PIN // X-STOP
#endif
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
#else
#define Y_MIN_PIN E1_DIAG_PIN // E1DET
#endif
#elif ENABLED(Y_DUAL_ENDSTOPS)
#ifndef Y_MIN_PIN
#define Y_MIN_PIN Y_DIAG_PIN // Y-STOP
#endif
#ifndef Y_MAX_PIN
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
#endif
#else
#define Y_STOP_PIN Y_DIAG_PIN // Y-STOP
#endif
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
#else
#define Z_MIN_PIN E2_DIAG_PIN // PWRDET
#endif
#elif ENABLED(Z_MULTI_ENDSTOPS)
#ifndef Z_MIN_PIN
#define Z_MIN_PIN Z_DIAG_PIN // Z-STOP
#endif
#ifndef Z_MAX_PIN
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
#endif
#else
#define Z_STOP_PIN Z_DIAG_PIN // Z-STOP
#endif
//
// Filament Runout Sensor
//
#define FIL_RUNOUT_PIN PG12 // E0DET
#define FIL_RUNOUT2_PIN PG13 // E1DET
#define FIL_RUNOUT3_PIN PG14 // E2DET
#define FIL_RUNOUT4_PIN PG15 // E3DET
//
// Power Supply Control
//
#ifndef PS_ON_PIN
#define PS_ON_PIN PE11 // PS-ON
#endif
//
// Power Loss Detection
//
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PC0 // PWRDET
#endif
//
// NeoPixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN PB0
#endif
//
// Steppers
//
#define X_STEP_PIN PF13 // MOTOR 0
#define X_DIR_PIN PF12
#define X_ENABLE_PIN PF14
#ifndef X_CS_PIN
#define X_CS_PIN PC4
#endif
#define Y_STEP_PIN PG0 // MOTOR 1
#define Y_DIR_PIN PG1
#define Y_ENABLE_PIN PF15
#ifndef Y_CS_PIN
#define Y_CS_PIN PD11
#endif
#define Z_STEP_PIN PF11 // MOTOR 2
#define Z_DIR_PIN PG3
#define Z_ENABLE_PIN PG5
#ifndef Z_CS_PIN
#define Z_CS_PIN PC6
#endif
#define Z2_STEP_PIN PG4 // MOTOR 3
#define Z2_DIR_PIN PC1
#define Z2_ENABLE_PIN PA0
#ifndef Z2_CS_PIN
#define Z2_CS_PIN PC7
#endif
#define E0_STEP_PIN PF9 // MOTOR 4
#define E0_DIR_PIN PF10
#define E0_ENABLE_PIN PG2
#ifndef E0_CS_PIN
#define E0_CS_PIN PF2
#endif
#define E1_STEP_PIN PC13 // MOTOR 5
#define E1_DIR_PIN PF0
#define E1_ENABLE_PIN PF1
#ifndef E1_CS_PIN
#define E1_CS_PIN PE4
#endif
#define E2_STEP_PIN PE2 // MOTOR 6
#define E2_DIR_PIN PE3
#define E2_ENABLE_PIN PD4
#ifndef E2_CS_PIN
#define E2_CS_PIN PE1
#endif
#define E3_STEP_PIN PE6 // MOTOR 7
#define E3_DIR_PIN PA14
#define E3_ENABLE_PIN PE0
#ifndef E3_CS_PIN
#define E3_CS_PIN PD3
#endif
//
// Temperature Sensors
//
#define TEMP_BED_PIN PF3 // TB
#if TEMP_SENSOR_0 == 20
#define TEMP_0_PIN PF8 // PT100 Connector
#else
#define TEMP_0_PIN PF4 // TH0
#endif
#define TEMP_1_PIN PF5 // TH1
#define TEMP_2_PIN PF6 // TH2
#define TEMP_3_PIN PF7 // TH3
//
// Heaters / Fans
//
#define HEATER_BED_PIN PA1 // Hotbed
#define HEATER_0_PIN PA2 // Heater0
#define HEATER_1_PIN PA3 // Heater1
#define HEATER_2_PIN PB10 // Heater2
#define HEATER_3_PIN PB11 // Heater3
#define FAN_PIN PA8 // Fan0
#define FAN1_PIN PE5 // Fan1
#define FAN2_PIN PD12 // Fan2
#define FAN3_PIN PD13 // Fan3
#define FAN4_PIN PD14 // Fan4
#define FAN5_PIN PD15 // Fan5
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#if HAS_WIRED_LCD
#define SDCARD_CONNECTION LCD
#else
#define SDCARD_CONNECTION ONBOARD
#endif
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PA7
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PA6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PA5
#endif
#endif
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN PC4
#define X_SERIAL_RX_PIN PC4
#define Y_SERIAL_TX_PIN PD11
#define Y_SERIAL_RX_PIN PD11
#define Z_SERIAL_TX_PIN PC6
#define Z_SERIAL_RX_PIN PC6
#define Z2_SERIAL_TX_PIN PC7
#define Z2_SERIAL_RX_PIN PC7
#define E0_SERIAL_TX_PIN PF2
#define E0_SERIAL_RX_PIN PF2
#define E1_SERIAL_TX_PIN PE4
#define E1_SERIAL_RX_PIN PE4
#define E2_SERIAL_TX_PIN PE1
#define E2_SERIAL_RX_PIN PE1
#define E3_SERIAL_TX_PIN PD3
#define E3_SERIAL_RX_PIN PD3
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
/**
* ______ ______
* NC | 1 2 | GND 5V | 1 2 | GND
* RESET | 3 4 | PC15 (SD_DETECT) (LCD_D7) PE15 | 3 4 | PE14 (LCD_D6)
* (MOSI) PA7 | 5 6 PB1 (BTN_EN2) (LCD_D5) PE13 | 5 6 PE12 (LCD_D4)
* (SD_SS) PA4 | 7 8 | PB2 (BTN_EN1) (LCD_RS) PE10 | 7 8 | PE9 (LCD_EN)
* (SCK) PA5 | 9 10 | PA6 (MISO) (BTN_ENC) PE7 | 9 10 | PE8 (BEEPER)
* ------ -----
* EXP2 EXP1
*/
#define EXP1_03_PIN PE15
#define EXP1_04_PIN PE14
#define EXP1_05_PIN PE13
#define EXP1_06_PIN PE12
#define EXP1_07_PIN PE10
#define EXP1_08_PIN PE9
#define EXP1_09_PIN PE7
#define EXP1_10_PIN PE8
#define EXP2_03_PIN -1
#define EXP2_04_PIN PC15
#define EXP2_05_PIN PA7
#define EXP2_06_PIN PB2
#define EXP2_07_PIN PA4
#define EXP2_08_PIN PB1
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
//
// Onboard SD card
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
//
#if SD_CONNECTION_IS(ONBOARD)
#define SDIO_SUPPORT // Use SDIO for onboard SD
#undef SD_DETECT_STATE
#define SD_DETECT_STATE HIGH
#define SD_DETECT_PIN PC14
#elif SD_CONNECTION_IS(LCD)
#define CUSTOM_SPI_PINS
#define SDSS PA4
#define SD_SS_PIN SDSS
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_DETECT_PIN PC15
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board"
#endif
#if ENABLED(BTT_MOTOR_EXPANSION)
/**
* ______ ______
* NC | 1 2 | GND NC | 1 2 | GND
* NC | 3 4 | M1EN M2EN | 3 4 | M3EN
* M1STP | 5 6 M1DIR M1RX | 5 6 M1DIAG
* M2DIR | 7 8 | M2STP M2RX | 7 8 | M2DIAG
* M3DIR | 9 10 | M3STP M3RX | 9 10 | M3DIAG
* ------ ------
* EXP2 EXP1
*/
// M1 on Driver Expansion Module
#define E4_STEP_PIN EXP2_05_PIN
#define E4_DIR_PIN EXP2_06_PIN
#define E4_ENABLE_PIN EXP2_04_PIN
#define E4_DIAG_PIN EXP1_06_PIN
#define E4_CS_PIN EXP1_05_PIN
#if HAS_TMC_UART
#define E4_SERIAL_TX_PIN EXP1_05_PIN
#define E4_SERIAL_RX_PIN EXP1_05_PIN
#endif
// M2 on Driver Expansion Module
#define E5_STEP_PIN EXP2_08_PIN
#define E5_DIR_PIN EXP2_07_PIN
#define E5_ENABLE_PIN EXP1_03_PIN
#define E5_DIAG_PIN EXP1_08_PIN
#define E5_CS_PIN EXP1_07_PIN
#if HAS_TMC_UART
#define E5_SERIAL_TX_PIN EXP1_07_PIN
#define E5_SERIAL_RX_PIN EXP1_07_PIN
#endif
// M3 on Driver Expansion Module
#define E6_STEP_PIN EXP2_10_PIN
#define E6_DIR_PIN EXP2_09_PIN
#define E6_ENABLE_PIN EXP1_04_PIN
#define E6_DIAG_PIN EXP1_10_PIN
#define E6_CS_PIN EXP1_09_PIN
#if HAS_TMC_UART
#define E6_SERIAL_TX_PIN EXP1_09_PIN
#define E6_SERIAL_RX_PIN EXP1_09_PIN
#endif
#endif // BTT_MOTOR_EXPANSION
//
// LCDs and Controllers
//
#if IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define TFTGLCD_CS EXP2_08_PIN
#endif
#elif HAS_WIRED_LCD
#define BEEPER_PIN EXP1_10_PIN
#define BTN_ENC EXP1_09_PIN
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXP1_04_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
// CR10_STOCKDISPLAY default timing is too fast
#undef BOARD_ST7920_DELAY_1
#undef BOARD_ST7920_DELAY_2
#undef BOARD_ST7920_DELAY_3
#else
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
//#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXP1_05_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXP1_04_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXP1_03_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXP1_05_PIN
#endif
#endif // !FYSETC_MINI_12864
#if IS_ULTIPANEL
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
#endif
#endif
#endif
#endif // HAS_WIRED_LCD
// Alter timing for graphical display
#if HAS_MARLINUI_U8GLIB
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(120) // DELAY_NS(96)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(80) // DELAY_NS(48)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(580) // DELAY_NS(600)
#endif
#endif
//
// WIFI
//
/**
* -------
* GND | 9 | | 8 | 3.3V
* (ESP-CS) PB12 | 10 | | 7 | PB15 (ESP-MOSI)
* 3.3V | 11 | | 6 | PB14 (ESP-MISO)
* (ESP-IO0) PD7 | 12 | | 5 | PB13 (ESP-CLK)
* (ESP-IO4) PD10 | 13 | | 4 | NC
* NC | 14 | | 3 | PE15 (ESP-EN)
* (ESP-RX) PD8 | 15 | | 2 | NC
* (ESP-TX) PD9 | 16 | | 1 | PE14 (ESP-RST)
* -------
* WIFI
*/
#define ESP_WIFI_MODULE_COM 3 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define ESP_WIFI_MODULE_RESET_PIN PG7
#define ESP_WIFI_MODULE_ENABLE_PIN PG8
#define ESP_WIFI_MODULE_GPIO0_PIN PD7
#define ESP_WIFI_MODULE_GPIO4_PIN PD10

View File

@ -0,0 +1,35 @@
{
"build": {
"cpu": "cortex-m4",
"extra_flags": "-DSTM32F446xx",
"f_cpu": "180000000L",
"mcu": "stm32f446zet6",
"variant": "MARLIN_BIGTREE_OCTOPUS_V1_0"
},
"connectivity": [
"can"
],
"debug": {
"jlink_device": "STM32F446ZE",
"openocd_target": "stm32f4x",
"svd_path": "STM32F446x.svd"
},
"frameworks": [
"arduino",
"stm32cube"
],
"name": "STM32F446ZE (128k RAM. 512k Flash)",
"upload": {
"maximum_ram_size": 131072,
"maximum_size": 524288,
"protocol": "stlink",
"protocols": [
"jlink",
"stlink",
"blackmagic",
"serial"
]
},
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html",
"vendor": "Generic"
}

View File

@ -0,0 +1,392 @@
/*
*******************************************************************************
* Copyright (c) 2016, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
#include "Arduino.h"
#include "PeripheralPins.h"
// =====
// Note: Commented lines are alternative possibilities which are not used per default.
// If you change them, you will have to know what you do
// =====
//*** ADC ***
#ifdef HAL_ADC_MODULE_ENABLED
const PinMap PinMap_ADC[] = {
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 TH_0
{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 TH_1
{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 TH_2
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 TH_3
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 EXP_13
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 PT100
{NC, NP, 0}
// {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
// {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
// {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
// {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
// {PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
//{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
// {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
// {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
// {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
// {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
// {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
// {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
// {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
};
#endif
//*** DAC ***
#ifdef HAL_DAC_MODULE_ENABLED
const PinMap PinMap_DAC[] = {
// {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
// {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - LD2
{NC, NP, 0}
};
#endif
//*** I2C ***
#ifdef HAL_I2C_MODULE_ENABLED
const PinMap PinMap_I2C_SDA[] = {
// {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
// {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
// {PC_7, FMPI2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
// {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
// {PC_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{NC, NP, 0}
};
#endif
#ifdef HAL_I2C_MODULE_ENABLED
const PinMap PinMap_I2C_SCL[] = {
// {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
// {PC_6, FMPI2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
{NC, NP, 0}
};
#endif
//*** PWM ***
#ifdef HAL_TIM_MODULE_ENABLED
const PinMap PinMap_PWM[] = {
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - STLink Tx
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 - STLink Tx
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - STLink Tx
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - STLink Rx
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 - STLink Rx
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - STLink Rx
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
// {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // Fan0, TIM8_CH2N
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // Fan1, TIM8_CH3N
{PB_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // Fan2, TIM2_CH4
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // E0 Heater, TIM2_CH2
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // E1 Heater, TIM3_CH1
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // LED G, TIM3_CH2
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // LED R, TIM4_CH1
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // LED B, TIM4_CH2
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
// {PB_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
// {PB_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
// {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
// {PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
// {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
// {PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
// {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
// {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
// {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
// {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 BED
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 HEATER1
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 FAN1
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
{NC, NP, 0}
};
#endif
//*** SERIAL ***
#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_TX[] = {
// {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
// {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
//{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
{NC, NP, 0}
};
#endif
#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_RX[] = {
// {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
// {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
//{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
{NC, NP, 0}
};
#endif
#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_RTS[] = {
// {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
// {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
{NC, NP, 0}
};
#endif
#ifdef HAL_UART_MODULE_ENABLED
const PinMap PinMap_UART_CTS[] = {
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
// {PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
// {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
// {PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
{NC, NP, 0}
};
#endif
//*** SPI ***
#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_MOSI[] = {
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_0, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
// {PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
// {PC_1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NP, 0}
};
#endif
#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NP, 0}
};
#endif
#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_7, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NP, 0}
};
#endif
#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_SSEL[] = {
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
// {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
// {PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
// {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{NC, NP, 0}
};
#endif
//*** CAN ***
#ifdef HAL_CAN_MODULE_ENABLED
const PinMap PinMap_CAN_RD[] = {
// {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
// {PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
// {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
// {PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
{NC, NP, 0}
};
#endif
#ifdef HAL_CAN_MODULE_ENABLED
const PinMap PinMap_CAN_TD[] = {
// {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
// {PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
// {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
// {PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
{NC, NP, 0}
};
#endif
//*** ETHERNET ***
//*** No Ethernet ***
//*** QUADSPI ***
#ifdef HAL_QSPI_MODULE_ENABLED
const PinMap PinMap_QUADSPI[] = {
// {PA_1, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO3
// {PB_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_CLK
// {PB_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QSPI)}, // QUADSPI_BK1_NCS
// {PC_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO0
// {PC_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO1
// {PC_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK2_NCS
{NC, NP, 0}
};
#endif
//*** USB ***
#ifdef HAL_PCD_MODULE_ENABLED
const PinMap PinMap_USB_OTG_FS[] = {
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)}, // USB_OTG_FS_VBUS
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
{NC, NP, 0}
};
#endif
#ifdef HAL_PCD_MODULE_ENABLED
const PinMap PinMap_USB_OTG_HS[] = {
{NC, NP, 0}
};
#ifdef HAL_SD_MODULE_ENABLED
WEAK const PinMap PinMap_SD[] = {
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
{NC, NP, 0}
};
#endif
#endif

View File

@ -0,0 +1,30 @@
/* SYS_WKUP */
#ifdef PWR_WAKEUP_PIN1
SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
#endif
#ifdef PWR_WAKEUP_PIN2
SYS_WKUP2 = NC,
#endif
#ifdef PWR_WAKEUP_PIN3
SYS_WKUP3 = NC,
#endif
#ifdef PWR_WAKEUP_PIN4
SYS_WKUP4 = NC,
#endif
#ifdef PWR_WAKEUP_PIN5
SYS_WKUP5 = NC,
#endif
#ifdef PWR_WAKEUP_PIN6
SYS_WKUP6 = NC,
#endif
#ifdef PWR_WAKEUP_PIN7
SYS_WKUP7 = NC,
#endif
#ifdef PWR_WAKEUP_PIN8
SYS_WKUP8 = NC,
#endif
/* USB */
#ifdef USBCON
USB_OTG_FS_DM = PA_11,
USB_OTG_FS_DP = PA_12,
#endif

View File

@ -0,0 +1,53 @@
#pragma once
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
#define HAL_CRC_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_USART_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
//#define HAL_UART_MODULE_ENABLED // by default
//#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
#define HAL_SD_MODULE_ENABLED
//#undef HAL_SD_MODULE_ENABLED
#undef HAL_DAC_MODULE_ENABLED
#undef HAL_FLASH_MODULE_ENABLED
#undef HAL_CAN_MODULE_ENABLED
#undef HAL_CAN_LEGACY_MODULE_ENABLED
#undef HAL_CEC_MODULE_ENABLED
#undef HAL_CRYP_MODULE_ENABLED
#undef HAL_DCMI_MODULE_ENABLED
#undef HAL_DMA2D_MODULE_ENABLED
#undef HAL_ETH_MODULE_ENABLED
#undef HAL_NAND_MODULE_ENABLED
#undef HAL_NOR_MODULE_ENABLED
#undef HAL_PCCARD_MODULE_ENABLED
#undef HAL_SRAM_MODULE_ENABLED
#undef HAL_SDRAM_MODULE_ENABLED
#undef HAL_HASH_MODULE_ENABLED
#undef HAL_EXTI_MODULE_ENABLED
#undef HAL_SMBUS_MODULE_ENABLED
#undef HAL_I2S_MODULE_ENABLED
#undef HAL_IWDG_MODULE_ENABLED
#undef HAL_LTDC_MODULE_ENABLED
#undef HAL_DSI_MODULE_ENABLED
#undef HAL_QSPI_MODULE_ENABLED
#undef HAL_RNG_MODULE_ENABLED
#undef HAL_SAI_MODULE_ENABLED
#undef HAL_IRDA_MODULE_ENABLED
#undef HAL_SMARTCARD_MODULE_ENABLED
#undef HAL_WWDG_MODULE_ENABLED
//#undef HAL_HCD_MODULE_ENABLED
#undef HAL_FMPI2C_MODULE_ENABLED
#undef HAL_SPDIFRX_MODULE_ENABLED
#undef HAL_DFSDM_MODULE_ENABLED
#undef HAL_LPTIM_MODULE_ENABLED
#undef HAL_MMC_MODULE_ENABLED

View File

@ -0,0 +1,187 @@
/*
*****************************************************************************
**
** File : LinkerScript.ld
**
** Abstract : Linker script for STM32F407VETx Device with
** 512KByte FLASH, 128KByte RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
**
** Distribution: The file is distributed as is, without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of Ac6 nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200;; /* required amount of heap */
_Min_Stack_Size = 0x400;; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x8008000, LENGTH = 512K
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text ALIGN(4):
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata ALIGN(4):
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/*_siccmram = LOADADDR(.ccmram);*/
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(4);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(4);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,239 @@
/*
Copyright (c) 2011 Arduino. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "pins_arduino.h"
#ifdef __cplusplus
extern "C" {
#endif
// Pin number
const PinName digitalPin[] = {
PA_0, //D0
PA_1, //D1
PA_2, //D2
PA_3, //D3
PA_4, //D4
PA_5, //D5
PA_6, //D6
PA_7, //D7
PA_8, //D8
PA_9, //D9
PA_10, //D10
PA_11, //D11
PA_12, //D12
PA_13, //D13
PA_14, //D14
PA_15, //D15
PB_0, //D16
PB_1, //D17
PB_2, //D18
PB_3, //D19
PB_4, //D20
PB_5, //D21
PB_6, //D22
PB_7, //D23
PB_8, //D24
PB_9, //D25
PB_10, //D26
PB_11, //D27
PB_12, //D28
PB_13, //D29
PB_14, //D30
PB_15, //D31
PC_0, //D32
PC_1, //D33
PC_2, //D34
PC_3, //D35
PC_4, //D36
PC_5, //D37
PC_6, //D38
PC_7, //D39
PC_8, //D40
PC_9, //D41
PC_10, //D42
PC_11, //D43
PC_12, //D44
PC_13, //D45
PC_14, //D46
PC_15, //D47
PD_0, //D48
PD_1, //D49
PD_2, //D50
PD_3, //D51
PD_4, //D52
PD_5, //D53
PD_6, //D54
PD_7, //D55
PD_8, //D56
PD_9, //D57
PD_10, //D58
PD_11, //D59
PD_12, //D60
PD_13, //D61
PD_14, //D62
PD_15, //D63
PE_0, //D64
PE_1, //D65
PE_2, //D66
PE_3, //D67
PE_4, //D68
PE_5, //D69
PE_6, //D70
PE_7, //D71
PE_8, //D72
PE_9, //D73
PE_10, //D74
PE_11, //D75
PE_12, //D76
PE_13, //D77
PE_14, //D78
PE_15, //D79
PF_0, //D80
PF_1, //D81
PF_2, //D82
PF_3, //D83
PF_4, //D84
PF_5, //D85
PF_6, //D86
PF_7, //D87
PF_8, //D88
PF_9, //D89
PF_10, //D90
PF_11, //D91
PF_12, //D92
PF_13, //D93
PF_14, //D94
PF_15, //D95
PG_0, //D96
PG_1, //D97
PG_2, //D98
PG_3, //D99
PG_4, //D100
PG_5, //D101
PG_6, //D102
PG_7, //D103
PG_8, //D104
PG_9, //D105
PG_10, //D106
PG_11, //D107
PG_12, //D108
PG_13, //D109
PG_14, //D110
PG_15, //D111
//Duplicated ADC Pins
PA_3, //D112/A0
PA_4, //D113/A1
PC_0, //D114/A2
PC_1, //D115/A3
PC_2, //D116/A4
PC_3, //D117/A5
PC_4, //D118/A6
PF_3, //D119/A16 - 1:FSMC_A3 2:ADC3_IN9
PF_4, //D120/A17 - 1:FSMC_A4 2:ADC3_IN14
PF_5, //D121/A18 - 1:FSMC_A5 2:ADC3_IN15
PF_6, //D122/A19 - 1:TIM10_CH1 2:ADC3_IN4
PF_7, //D123/A20 - 1:TIM11_CH1 2:ADC3_IN5
PF_8, //D124/A20 - 1:TIM11_CH1 2:ADC3_IN6
};
#ifdef __cplusplus
}
#endif
// ----------------------------------------------------------------------------
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 180000000
* HCLK(Hz) = 180000000
* AHB Prescaler = 1
* APB1 Prescaler = 4
* APB2 Prescaler = 2
* HSE Frequency(Hz) = 12000000
* PLL_M = 6
* PLL_N = 180
* PLL_P = 2
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 5
* @param None
* @retval None
*/
WEAK void SystemClock_Config(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
#ifdef HAL_PWR_MODULE_ENABLED
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
#endif
/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 6;
RCC_OscInitStruct.PLL.PLLN = 180;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
RCC_OscInitStruct.PLL.PLLR = 2;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
HAL_PWREx_EnableOverDrive();
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLRCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
PeriphClkInitStruct.PLLSAI.PLLSAIM = 6;
PeriphClkInitStruct.PLLSAI.PLLSAIN = 96;
PeriphClkInitStruct.PLLSAI.PLLSAIQ = 2;
PeriphClkInitStruct.PLLSAI.PLLSAIP = RCC_PLLSAIP_DIV4;
PeriphClkInitStruct.PLLSAIDivQ = 1;
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLSAIP;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
}
#ifdef __cplusplus
}
#endif

View File

@ -0,0 +1,216 @@
/*
Copyright (c) 2011 Arduino. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_ARDUINO_STM32_
#define _VARIANT_ARDUINO_STM32_
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/*----------------------------------------------------------------------------
* Pins
*----------------------------------------------------------------------------*/
#define PA0 0 //D0
#define PA1 1 //D1
#define PA2 2 //D2
#define PA3 3 //D3
#define PA4 4 //D4
#define PA5 5 //D5
#define PA6 6 //D6
#define PA7 7 //D7
#define PA8 8 //D8
#define PA9 9 //D9
#define PA10 10 //D10
#define PA11 11 //D11
#define PA12 12 //D12
#define PA13 13 //D13
#define PA14 14 //D14
#define PA15 15 //D15
#define PB0 16 //D16
#define PB1 17 //D17
#define PB2 18 //D18
#define PB3 19 //D19
#define PB4 20 //D20
#define PB5 21 //D21
#define PB6 22 //D22
#define PB7 23 //D23
#define PB8 24 //D24
#define PB9 25 //D25
#define PB10 26 //D26
#define PB11 27 //D27
#define PB12 28 //D28
#define PB13 29 //D29
#define PB14 30 //D30
#define PB15 31 //D31
#define PC0 32 //D32
#define PC1 33 //D33
#define PC2 34 //D34
#define PC3 35 //D35
#define PC4 36 //D36
#define PC5 37 //D37
#define PC6 38 //D38
#define PC7 39 //D39
#define PC8 40 //D40
#define PC9 41 //D41
#define PC10 42 //D42
#define PC11 43 //D43
#define PC12 44 //D44
#define PC13 45 //D45
#define PC14 46 //D46
#define PC15 47 //D47
#define PD0 48 //D48
#define PD1 49 //D49
#define PD2 50 //D50
#define PD3 51 //D51
#define PD4 52 //D52
#define PD5 53 //D53
#define PD6 54 //D54
#define PD7 55 //D55
#define PD8 56 //D56
#define PD9 57 //D57
#define PD10 58 //D58
#define PD11 59 //D59
#define PD12 60 //D60
#define PD13 61 //D61
#define PD14 62 //D62
#define PD15 63 //D63
#define PE0 64 //D64
#define PE1 65 //D65
#define PE2 66 //D66
#define PE3 67 //D67
#define PE4 68 //D68
#define PE5 69 //D69
#define PE6 70 //D70
#define PE7 71 //D71
#define PE8 72 //D72
#define PE9 73 //D73
#define PE10 74 //D74
#define PE11 75 //D75
#define PE12 76 //D76
#define PE13 77 //D77
#define PE14 78 //D78
#define PE15 79 //D79
#define PF0 80 //D64
#define PF1 81 //D65
#define PF2 82 //D66
#define PF3 83 //D67
#define PF4 84 //D68
#define PF5 85 //D69
#define PF6 86 //D70
#define PF7 87 //D71
#define PF8 88 //D72
#define PF9 89 //D73
#define PF10 90 //D74
#define PF11 91 //D75
#define PF12 92 //D76
#define PF13 93 //D77
#define PF14 94 //D78
#define PF15 95 //D79
#define PG0 96 //D64
#define PG1 97 //D65
#define PG2 98 //D66
#define PG3 99 //D67
#define PG4 100 //D68
#define PG5 101 //D69
#define PG6 102 //D70
#define PG7 103 //D71
#define PG8 104 //D72
#define PG9 105 //D73
#define PG10 106 //D74
#define PG11 107 //D75
#define PG12 108 //D76
#define PG13 109 //D77
#define PG14 110 //D78
#define PG15 111 //D79
// This must be a literal with the same value as PEND
#define NUM_DIGITAL_PINS 125
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
#define NUM_ANALOG_INPUTS 13
#define NUM_ANALOG_FIRST 112
//#define ADC_RESOLUTION 12
// PWM resolution
//#define PWM_RESOLUTION 12
#define PWM_FREQUENCY 20000 // >= 20 Khz => inaudible noise for fans
#define PWM_MAX_DUTY_CYCLE 255
// SPI Definitions
#define PIN_SPI_SS PA4
#define PIN_SPI_MOSI PA7
#define PIN_SPI_MISO PA6
#define PIN_SPI_SCK PA5
// I2C Definitions
#define PIN_WIRE_SDA PB9
#define PIN_WIRE_SCL PB8
// Timer Definitions
// Do not use timer used by PWM pin. See PinMap_PWM.
#define TIMER_TONE TIM6
#define TIMER_SERVO TIM5
#define TIMER_SERIAL TIM7
// UART Definitions
//#define SERIAL_UART_INSTANCE 1 // Connected to EXP3 header
/* Enable Serial 3 */
#define HAVE_HWSERIAL1
#define HAVE_HWSERIAL3
// Default pin used for 'Serial' instance (ex: ST-Link)
// Mandatory for Firmata
#define PIN_SERIAL_RX PA10
#define PIN_SERIAL_TX PA9
/* HAL configuration */
#define HSE_VALUE 12000000U
#define FLASH_PAGE_SIZE (4U * 1024U)
#ifdef __cplusplus
} // extern "C"
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
// These serial port names are intended to allow libraries and architecture-neutral
// sketches to automatically default to the correct port name for a particular type
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
//
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
//
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
//
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
//
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
//
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
// pins are NOT connected to anything by default.
#define SERIAL_PORT_MONITOR Serial
#define SERIAL_PORT_HARDWARE_OPEN Serial
#endif
#endif /* _VARIANT_ARDUINO_STM32_ */

View File

@ -228,7 +228,7 @@ extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# Bigtreetech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support
# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_SKR_2]
platform = ${common_stm32.platform}
@ -247,6 +247,29 @@ build_flags = ${stm_flash_drive.build_flags}
-DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6
-DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED
#
# BigTreeTech Octopus V1.0 (STM32F446ZET6 ARM Cortex-M4)
#
[env:BIGTREE_OCTOPUS_V1_0]
platform = ${common_stm32.platform}
extends = common_stm32
board = marlin_BigTree_octopus_v1
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common_stm32.build_flags}
-DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000 -DUSE_USB_HS_IN_FS
#
# BigTreeTech Octopus V1.0 (STM32F446ZET6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_OCTOPUS_V1_0_USB]
extends = env:BIGTREE_OCTOPUS_V1_0
platform_packages = ${stm_flash_drive.platform_packages}
#build_unflags = -DUSBCON -DUSBD_USE_CDC
build_flags = ${stm_flash_drive.build_flags}
-DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000
-DUSBCON -DUSE_USBHOST_HS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSE_USB_HS_IN_FS -DUSBD_USE_CDC_MSC
#
# Lerdge base
#