bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 abs => ABS

Browse Source
This commit is contained in:
Scott Lahteine 2021-07-29 23:40:27 -05:00 committed by Scott Lahteine
parent eb8649ba42
commit 3e559d5c1c
11 changed files with 26 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/feature/probe_temp_comp.cpp
View File

@ -143,13 +143,13 @@ bool ProbeTempComp::finish_calibration(const TempSensorID tsi) {
// Sanity check
for (calib_idx = 0; calib_idx < measurements; ++calib_idx) {
// Restrict the max. offset
if (abs(data[calib_idx]) > 2000) {
if (ABS(data[calib_idx]) > 2000) {
SERIAL_ECHOLNPGM("!Invalid Z-offset detected (0-2).");
clear_offsets(tsi);
return false;
}
// Restrict the max. offset difference between two probings
if (calib_idx > 0 && abs(data[calib_idx - 1] - data[calib_idx]) > 800) {
if (calib_idx > 0 && ABS(data[calib_idx - 1] - data[calib_idx]) > 800) {
SERIAL_ECHOLNPGM("!Invalid Z-offset between two probings detected (0-0.8).");
clear_offsets(TSI_PROBE);
return false;

6
Marlin/src/gcode/bedlevel/G35.cpp
View File

@ -130,7 +130,7 @@ void GcodeSuite::G35() {
// Calculate adjusts
LOOP_S_L_N(i, 1, G35_PROBE_COUNT) {
const float diff = z_measured[0] - z_measured[i],
adjust = abs(diff) < 0.001f ? 0 : diff / threads_factor[(screw_thread - 30) / 10];
adjust = ABS(diff) < 0.001f ? 0 : diff / threads_factor[(screw_thread - 30) / 10];
const int full_turns = trunc(adjust);
const float decimal_part = adjust - float(full_turns);
@ -138,8 +138,8 @@ void GcodeSuite::G35() {
SERIAL_ECHOPGM("Turn ");
SERIAL_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i]));
SERIAL_ECHOPAIR(" ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", abs(full_turns), " turns");
if (minutes) SERIAL_ECHOPAIR(" and ", abs(minutes), " minutes");
SERIAL_ECHOPAIR(" ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", ABS(full_turns), " turns");
if (minutes) SERIAL_ECHOPAIR(" and ", ABS(minutes), " minutes");
if (ENABLED(REPORT_TRAMMING_MM)) SERIAL_ECHOPAIR(" (", -diff, "mm)");
SERIAL_EOL();
}

2
Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp
View File

@ -121,7 +121,7 @@ ENCODER_DiffState Encoder_ReceiveAnalyze() {
lastEncoderBits = newbutton;
}
if (abs(temp_diff) >= ENCODER_PULSES_PER_STEP) {
if (ABS(temp_diff) >= ENCODER_PULSES_PER_STEP) {
if (temp_diff > 0) temp_diffState = ENCODER_DIFF_CW;
else temp_diffState = ENCODER_DIFF_CCW;

20
Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp
View File

@ -624,25 +624,25 @@ void DGUSScreenHandler::ManualAssistLeveling(DGUS_VP_Variable &var, void *val_pt
switch (point_value) {
case 0x0001:
enqueue_corner_move(X_MIN_POS + abs(mks_corner_offsets[0].x),
Y_MIN_POS + abs(mks_corner_offsets[0].y), level_speed);
enqueue_corner_move(X_MIN_POS + ABS(mks_corner_offsets[0].x),
Y_MIN_POS + ABS(mks_corner_offsets[0].y), level_speed);
queue.enqueue_now_P(PSTR("G28Z"));
break;
case 0x0002:
enqueue_corner_move(X_MAX_POS - abs(mks_corner_offsets[1].x),
Y_MIN_POS + abs(mks_corner_offsets[1].y), level_speed);
enqueue_corner_move(X_MAX_POS - ABS(mks_corner_offsets[1].x),
Y_MIN_POS + ABS(mks_corner_offsets[1].y), level_speed);
break;
case 0x0003:
enqueue_corner_move(X_MAX_POS - abs(mks_corner_offsets[2].x),
Y_MAX_POS - abs(mks_corner_offsets[2].y), level_speed);
enqueue_corner_move(X_MAX_POS - ABS(mks_corner_offsets[2].x),
Y_MAX_POS - ABS(mks_corner_offsets[2].y), level_speed);
break;
case 0x0004:
enqueue_corner_move(X_MIN_POS + abs(mks_corner_offsets[3].x),
Y_MAX_POS - abs(mks_corner_offsets[3].y), level_speed);
enqueue_corner_move(X_MIN_POS + ABS(mks_corner_offsets[3].x),
Y_MAX_POS - ABS(mks_corner_offsets[3].y), level_speed);
break;
case 0x0005:
enqueue_corner_move(abs(mks_corner_offsets[4].x),
abs(mks_corner_offsets[4].y), level_speed);
enqueue_corner_move(ABS(mks_corner_offsets[4].x),
ABS(mks_corner_offsets[4].y), level_speed);
break;
}

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/move_axis_screen.cpp
View File

@ -121,7 +121,7 @@ float BaseMoveAxisScreen::getManualFeedrate(uint8_t axis, float increment_mm) {
// being held down, this allows enough margin for the planner to
// connect segments and even out the motion.
constexpr xyze_feedrate_t max_manual_feedrate = MANUAL_FEEDRATE;
return min(max_manual_feedrate[axis] / 60.0f, abs(increment_mm * (TOUCH_REPEATS_PER_SECOND) * 0.80f));
return min(max_manual_feedrate[axis] / 60.0f, ABS(increment_mm * (TOUCH_REPEATS_PER_SECOND) * 0.80f));
}
void BaseMoveAxisScreen::setManualFeedrate(ExtUI::axis_t axis, float increment_mm) {

4
Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp
View File

@ -93,9 +93,9 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
has_adjust_z = 1;
break;
case ID_BABY_STEP_DIST:
if (abs((int)(100 * babystep_dist)) == 1)
if (ABS((int)(100 * babystep_dist)) == 1)
babystep_dist = 0.05;
else if (abs((int)(100 * babystep_dist)) == 5)
else if (ABS((int)(100 * babystep_dist)) == 5)
babystep_dist = 0.1;
else
babystep_dist = 0.01;

4
Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp
View File

@ -519,7 +519,7 @@ void filament_dialog_handle() {
if (uiCfg.filament_load_heat_flg) {
const celsius_t diff = thermalManager.wholeDegHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
if (abs(diff) < 2 || diff > 0) {
if (ABS(diff) < 2 || diff > 0) {
uiCfg.filament_load_heat_flg = false;
lv_clear_dialog();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED);
@ -535,7 +535,7 @@ void filament_dialog_handle() {
if (uiCfg.filament_unload_heat_flg) {
const celsius_t diff = thermalManager.wholeDegHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
if (abs(diff) < 2 || diff > 0) {
if (ABS(diff) < 2 || diff > 0) {
uiCfg.filament_unload_heat_flg = false;
lv_clear_dialog();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_UNLOAD_COMPLETED);

2
Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp
View File

@ -89,7 +89,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
disp_extru_amount();
break;
case ID_E_STEP:
switch (abs(uiCfg.extruStep)) {
switch (ABS(uiCfg.extruStep)) {
case 1: uiCfg.extruStep = 5; break;
case 5: uiCfg.extruStep = 10; break;
case 10: uiCfg.extruStep = 1; break;

4
Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp
View File

@ -50,7 +50,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
switch (obj->mks_obj_id) {
case ID_FILAMNT_IN:
uiCfg.filament_load_heat_flg = true;
if (abs(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
if (ABS(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
|| gCfgItems.filament_limit_temp <= thermalManager.wholeDegHotend(uiCfg.extruderIndex)) {
lv_clear_filament_change();
lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED);
@ -67,7 +67,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
case ID_FILAMNT_OUT:
uiCfg.filament_unload_heat_flg = true;
if (thermalManager.degTargetHotend(uiCfg.extruderIndex)
&& (abs(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
&& (ABS(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
|| thermalManager.wholeDegHotend(uiCfg.extruderIndex) >= gCfgItems.filament_limit_temp)
) {
lv_clear_filament_change();

2
Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp
View File

@ -75,7 +75,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
switch (obj->mks_obj_id) {
case ID_M_STEP:
if (abs(10 * (int)uiCfg.move_dist) == 100)
if (ABS(10 * (int)uiCfg.move_dist) == 100)
uiCfg.move_dist = 0.1;
else
uiCfg.move_dist *= 10.0f;

2
Marlin/src/lcd/menu/menu_bed_corners.cpp
View File

@ -87,7 +87,7 @@ constexpr int lco[] = LEVEL_CORNERS_LEVELING_ORDER;
constexpr bool level_corners_3_points = COUNT(lco) == 2;
static_assert(level_corners_3_points || COUNT(lco) == 4, "LEVEL_CORNERS_LEVELING_ORDER must have exactly 2 or 4 corners.");
constexpr int lcodiff = abs(lco[0] - lco[1]);
constexpr int lcodiff = ABS(lco[0] - lco[1]);
static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two LEVEL_CORNERS_LEVELING_ORDER corners must be on the same edge.");
constexpr int nr_edge_points = level_corners_3_points ? 3 : 4;