bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases4 Wiki Activity

Clean up trailing whitespace

Browse Source
This commit is contained in:
Scott Lahteine 2019-02-03 23:00:57 -06:00
parent 4d1093b386
commit 38c2ca9281
70 changed files with 208 additions and 208 deletions
Marlin
Configuration_adv.h
src
config
default
Configuration_adv.h
examples
3DFabXYZ/Migbot
Configuration_adv.h
AlephObjects/TAZ4
Configuration_adv.h
Anet
A2
Configuration_adv.h
A2plus
Configuration_adv.h
A6
Configuration_adv.h
A8
Configuration_adv.h
AnyCubic/i3
Configuration_adv.h
ArmEd
Configuration_adv.h
BIBO/TouchX
cyclops
Configuration_adv.h
default
Configuration_adv.h
BQ
Hephestos
Configuration_adv.h
Hephestos_2
Configuration_adv.h
WITBOX
Configuration_adv.h
Cartesio
Configuration_adv.h
Creality
CR-10
Configuration_adv.h
CR-10S
Configuration_adv.h
CR-10mini
Configuration_adv.h
CR-8
Configuration_adv.h
Ender-2
Configuration_adv.h
Ender-3
Configuration_adv.h
Ender-4
Configuration_adv.h
Einstart-S
Configuration_adv.h
Felix
Configuration_adv.h
FlashForge/CreatorPro
Configuration_adv.h
FolgerTech/i3-2020
Configuration_adv.h
Formbot
Raptor
Configuration_adv.h
T_Rex_2+
Configuration_adv.h
T_Rex_3
Configuration_adv.h
Geeetech
MeCreator2
Configuration_adv.h
Prusa i3 Pro C
Configuration_adv.h
Prusa i3 Pro W
Configuration_adv.h
Infitary/i3-M508
Configuration_adv.h
JGAurora/A5
Configuration_adv.h
MakerParts
Configuration_adv.h
Malyan
M150
Configuration_adv.h
M200
Configuration_adv.h
Micromake/C1/enhanced
Configuration_adv.h
Mks
Robin
Configuration_adv.h
Sbase
Configuration_adv.h
RapideLite/RL200
Configuration_adv.h
RigidBot
Configuration_adv.h
SCARA
Configuration_adv.h
Sanguinololu
Configuration_adv.h
TheBorg
Configuration_adv.h
TinyBoy2
Configuration_adv.h
Tronxy/X3A
Configuration_adv.h
UltiMachine
Archim1
Configuration_adv.h
Archim2
Configuration_adv.h
VORONDesign
Configuration_adv.h
Velleman
K8200
Configuration_adv.h
K8400
Configuration_adv.h
WASP/PowerWASP
Configuration_adv.h
Wanhao/Duplicator 6
Configuration_adv.h
delta
Anycubic/Kossel
Configuration_adv.h
FLSUN
auto_calibrate
Configuration_adv.h
kossel
Configuration_adv.h
kossel_mini
Configuration_adv.h
Geeetech/Rostock 301
Configuration_adv.h
MKS/SBASE
Configuration_adv.h
Tevo Little Monster
Configuration_adv.h
generic
Configuration_adv.h
kossel_mini
Configuration_adv.h
kossel_xl
Configuration_adv.h
gCreate/gMax1.5+
Configuration_adv.h
makibox
Configuration_adv.h
tvrrug/Round2
Configuration_adv.h
wt150
Configuration_adv.h
feature/prusa_MMU2
mmu2.cpp

6
Marlin/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/default/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@ -1951,14 +1951,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@ -1947,14 +1947,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/ArmEd/Configuration_adv.h

@ -1953,14 +1953,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@ -1947,14 +1947,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@ -1956,14 +1956,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Cartesio/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@ -1951,14 +1951,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Felix/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h

@ -1947,14 +1947,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@ -1952,14 +1952,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@ -1953,14 +1953,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@ -1934,14 +1934,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/MakerParts/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Mks/Robin/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@ -1956,14 +1956,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/RigidBot/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/SCARA/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/TheBorg/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/VORONDesign/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@ -1961,14 +1961,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@ -1951,14 +1951,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@ -1938,14 +1938,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/generic/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@ -1950,14 +1950,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/makibox/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@ -1948,14 +1948,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

6
Marlin/src/config/examples/wt150/Configuration_adv.h

@ -1949,14 +1949,14 @@
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/

2
Marlin/src/feature/prusa_MMU2/mmu2.cpp

@ -228,7 +228,7 @@ void MMU2::mmuLoop() {
}
break;
case -4:
case -4:
if (rx_ok()) {
sscanf(rx_buffer, "%hhuok\n", &finda);