bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🧑‍💻 Fix up some AUX / EXP pins (#23577)

Browse Source
This commit is contained in:
Scott Lahteine
2022-01-22 10:19:26 -06:00
committed by Scott Lahteine
parent 2142456a25
commit 2d032b734c
14 changed files with 196 additions and 125 deletions
Download Patch File Download Diff File Expand all files Collapse all files

78
Marlin/src/pins/sanguino/pins_ZMIB_V2.h
View File

@@ -146,7 +146,7 @@
#define FAN1_PIN -1
//
//filament run out sensor
// Filament Runout Sensor
//
#if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
#define FIL_RUNOUT_PIN 13
@@ -162,32 +162,38 @@
#endif
#define SD_DETECT_PIN -1
/*===================================================
* ZMIB Version 1 - EXP1 Connector
* MOSI(D5) TX1(D11) ENA(D12) ENC(D29/A2) 5V
* SCK(D7) RX1(D10) SCS(D4) ENB(D2) GND
*===================================================
* ZMIB Version 2 - EXP1 Connector
* MOSI(D5) TX1(D11) ENA(D12) ENC(D29/A2) 5V
* SCK(D7) RX1(D10) SCS(D3) ENB(D2) GND
*===================================================
* LCD 128x64
*==================================================*/
/** EXP1
* ------
* (MOSI) D5 |10 9 | D7 (SCK)
* (CS) D11 | 8 7 | D10 (DC/D4)
* (EN2) D12 6 5 | D4 or D3 (EN/RS)
* (ENC) D29 | 4 3 | D2 (EN1)
* (GND) | 2 1 | (5V)
* ------
*/
#define EXP1_03_PIN 2
#define EXP1_04_PIN 29
#ifndef IS_ZMIB_V2
#define EXP1_05_PIN 4 // ZMIB V1
#else
#define EXP1_05_PIN 3 // ZMIB V2
#endif
#define EXP1_06_PIN 12
#define EXP1_07_PIN 10
#define EXP1_08_PIN 11
#define EXP1_09_PIN 7
#define EXP1_10_PIN 5
#if ENABLED(ZONESTAR_12864LCD)
//
// LCD 128x64
//
#define LCDSCREEN_NAME "ZONESTAR_12864LCD"
#define LCDSCREEN_NAME "ZONESTAR_12864LCD"
#define FORCE_SOFT_SPI
//#define LCD_SDSS 11
#define LCD_PINS_RS 11 // ST7920_CS_PIN LCD_PIN_RS (PIN4 of LCD module)
#ifdef IS_ZMIB_V2
#define LCD_PINS_ENABLE 3 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module)
#else
#define LCD_PINS_ENABLE 4 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module)
#endif
#define LCD_PINS_D4 10 // ST7920_CLK_PIN LCD_PIN_ENABLE (PIN6 of LCD module)
//#define LCD_SDSS EXP1_08_PIN
#define LCD_PINS_RS EXP1_08_PIN // ST7920_CS_PIN (LCD module pin 4)
#define LCD_PINS_ENABLE EXP1_05_PIN // ST7920_DAT_PIN (LCD module pin 5)
#define LCD_PINS_D4 EXP1_07_PIN // ST7920_CLK_PIN (LCD module pin 6)
#define BOARD_ST7920_DELAY_1 DELAY_2_NOP
#define BOARD_ST7920_DELAY_2 DELAY_2_NOP
@@ -199,34 +205,28 @@
//
#define LCDSCREEN_NAME "ZONESTAR 12864OLED"
#define FORCE_SOFT_SPI
#ifdef IS_ZMIB_V2
#define LCD_PINS_RS 3 // RESET
#else
#define LCD_PINS_RS 4 // RESET
#endif
#define LCD_PINS_DC 10 // DC
#define DOGLCD_CS 11 // CS
#define LCD_PINS_RS EXP1_05_PIN
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#if ENABLED(OLED_HW_IIC)
#error "Oops! can't choose HW IIC for ZMIB board!!"
#elif ENABLED(OLED_HW_SPI)
// HW SPI
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
#else
// SW SPI
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
#define DOGLCD_MOSI AVR_MOSI_PIN // SDA
#define DOGLCD_SCK AVR_SCK_PIN // SCK
#define DOGLCD_A0 LCD_PINS_DC
#if DISABLED(OLED_HW_SPI)
#define DOGLCD_MOSI AVR_MOSI_PIN // Software SPI
#define DOGLCD_SCK AVR_SCK_PIN
#endif
#endif
#endif
//
// All the above are also RRDSC with rotary encoder
//
#if IS_RRD_SC
#define BTN_EN1 2
#define BTN_EN2 12
#define BTN_ENC 29
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_04_PIN
#define BEEPER_PIN -1
#define KILL_PIN -1
#endif