🧑‍💻 Fix up some AUX / EXP pins (#23577)

This commit is contained in:
Scott Lahteine 2022-01-22 10:19:26 -06:00 committed by Scott Lahteine
parent 2142456a25
commit 2d032b734c
14 changed files with 196 additions and 125 deletions

View File

@ -120,7 +120,7 @@
#define SD_MISO_PIN 19
#define SD_SCK_PIN 18
#define SDSS 5
#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal(Jump to SDDET)
#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal (Jump to SDDET)
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
/**
@ -177,9 +177,9 @@
#elif ENABLED(MKS_MINI_12864_V3)
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define DOGLCD_A0 LCD_PINS_DC
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN

View File

@ -62,6 +62,13 @@
#define TEMP_0_PIN 39 // Analog Input
#define TEMP_BED_PIN 36 // Analog Input
#if ENABLED(MAX31856_PANDAPI)
#define MAX31856_CLK_PIN 29
#define MAX31856_MISO_PIN 24
#define MAX31856_MOSI_PIN 28
#define MAX31856_CS_PIN 27
#endif
//
// Heaters / Fans
//
@ -74,25 +81,48 @@
#define E0_AUTO_FAN_PIN 120 // FAN2
#endif
/** ------ ------
* (MISO 19?) |10 9 | (18 SCK?) (BEEPER) 129 |10 9 | 12 (^ENC)
* (EN1) 33 | 8 7 | (5 SDSS?) (EN) 26 | 8 7 | 27 (RS)
* (EN2) 32 6 5 | (23 MOSI?) (D4) 14 | 6 5 --
* (SDDET 2?) | 4 3 | (RESET) -- | 4 3 | --
* -- | 2 1 | -- (GND) | 2 1 | (5V)
* ------ ------
* EXP2 EXP1
*/
#define EXP1_06_PIN 14
#define EXP1_07_PIN 27
#define EXP1_08_PIN 26
#define EXP1_09_PIN 12
#define EXP1_10_PIN 129
#define EXP2_04_PIN 2 // ?
#define EXP2_05_PIN 23 // ?
#define EXP2_06_PIN 32
#define EXP2_07_PIN 5 // ?
#define EXP2_08_PIN 33
#define EXP2_09_PIN 18 // ?
#define EXP2_10_PIN 19 // ?
//
// SD card
// SD Card
//
#if ENABLED(SDSUPPORT)
#define SD_MOSI_PIN 23
#define SD_MISO_PIN 19
#define SD_SCK_PIN 18
#define SDSS 5
#define SD_DETECT_PIN 2
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SDSS EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#if HAS_WIRED_LCD
#define BEEPER_PIN 129
#define BTN_ENC 12
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 33
#define BTN_EN2 32
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 26
#define LCD_PINS_D4 14
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#endif

View File

@ -84,7 +84,7 @@
#define E1_ENABLE_PIN 33
//
// Filament runout
// Filament Runout Sensor
//
#define FIL_RUNOUT_PIN 42 // ROT2 Connector
#define FIL_RUNOUT2_PIN 44 // ROT1 Connector

View File

@ -69,7 +69,7 @@
#endif
//
// Filament Runout Pins
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 49

View File

@ -120,14 +120,14 @@
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#ifndef X_CS_PIN
#define X_CS_PIN AUX3_03_PIN
#define X_CS_PIN 53
#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#ifndef Y_CS_PIN
#define Y_CS_PIN AUX3_07_PIN
#define Y_CS_PIN 49
#endif
#ifndef Z_STEP_PIN
@ -241,7 +241,7 @@
// Misc. Functions
//
#ifndef SDSS
#define SDSS AUX3_03_PIN
#define SDSS AUX3_06_PIN
#endif
#define LED_PIN 13
@ -423,18 +423,22 @@
#endif
//
// AUX1 : 5V GND D2 D1
// 5V GND A3 A4
// AUX1 5V GND D2 D1
// 2 4 6 8
// 1 3 5 7
// 5V GND A3 A4
//
#define AUX1_05_PIN 57 // (A3)
#define AUX1_06_PIN 2
#define AUX1_07_PIN 58 // (A4)
#define AUX1_08_PIN 1
//
// AUX2 : GND A9 D40 D42 A11
// VCC A5 A10 D44 A12
// AUX2 GND A9 D40 D42 A11
// 2 4 6 8 10
// 1 3 5 7 9
// VCC A5 A10 D44 A12
//
#define AUX2_03_PIN 59 // (A5)
#define AUX2_04_PIN 63 // (A9)
#define AUX2_05_PIN 64 // (A10)
@ -445,19 +449,20 @@
#define AUX2_10_PIN 65 // (A11)
//
// AUX3 : GND D52 D50 5V
// NC D53 D51 D49
#define AUX3_03_PIN 53
#define AUX3_04_PIN 52
#define AUX3_05_PIN 51
#define AUX3_06_PIN 50
#define AUX3_07_PIN 49
// AUX3 GND D52 D50 5V
// 7 5 3 1
// 8 6 4 2
// NC D53 D51 D49
//
#define AUX3_02_PIN 49
#define AUX3_03_PIN 50
#define AUX3_04_PIN 51
#define AUX3_05_PIN 52
#define AUX3_06_PIN 53
//
// AUX4 : D16 D17 D23 D25 D27 D29 D31 D33 D35 D37 D39 D41 D43 D45 D47 D32 GND 5V
// AUX4 5V GND D32 D47 D45 D43 D41 D39 D37 D35 D33 D31 D29 D27 D25 D23 D17 D16
//
#define AUX4_03_PIN 32
#define AUX4_04_PIN 47
#define AUX4_05_PIN 45
@ -476,35 +481,69 @@
#define AUX4_18_PIN 16
/**
* LCD adapter. NOTE: These come in two variants. The socket keys can be
* LCD adapters come in different variants. The socket keys can be
* on either side, and may be backwards on some boards / displays.
* ------ ------
* D37 |10 9 | D35 (MISO) D50 |10 9 | D52 (SCK)
* D17 | 8 7 | D16 D31 | 8 7 | D53
* D23 6 5 D25 D33 6 5 D51 (MOSI)
* D27 | 4 3 | D29 D49 | 4 3 | D41
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#ifndef EXP1_03_PIN
#define EXP1_03_PIN AUX4_13_PIN
#define EXP1_04_PIN AUX4_14_PIN
#define EXP1_05_PIN AUX4_15_PIN
#define EXP1_06_PIN AUX4_16_PIN
#define EXP1_07_PIN AUX4_18_PIN
#define EXP1_08_PIN AUX4_17_PIN
#define EXP1_09_PIN AUX4_10_PIN
#define EXP1_10_PIN AUX4_09_PIN
#define EXP2_03_PIN AUX4_07_PIN
#define EXP2_04_PIN AUX3_07_PIN
#define EXP2_05_PIN AUX3_05_PIN
#define EXP2_06_PIN AUX4_11_PIN
#define EXP2_07_PIN AUX3_03_PIN
#define EXP2_08_PIN AUX4_12_PIN
#define EXP2_09_PIN AUX3_04_PIN
#define EXP2_10_PIN AUX3_06_PIN
#define EXP2_04_PIN AUX3_02_PIN
#define EXP2_05_PIN AUX3_04_PIN
#define EXP2_07_PIN AUX3_06_PIN
#define EXP2_09_PIN AUX3_05_PIN
#define EXP2_10_PIN AUX3_03_PIN
#if ENABLED(G3D_PANEL)
/** Gadgets3D Smart Adapter
* ------ ------
* 4-11 |10 9 | 4-12 (MISO) 3-03 |10 9 | 3-05 (SCK)
* 4-17 | 8 7 | 4-18 4-10 | 8 7 | 3-06
* 4-16 6 5 | 4-15 4-09 6 5 | 3-04 (MOSI)
* 4-14 | 4 3 | 4-13 3-02 | 4 3 | 4-07
* (GND) 4-02 | 2 1 | 4-01 (5V) -- | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_09_PIN AUX4_12_PIN
#define EXP1_10_PIN AUX4_11_PIN
#define EXP2_03_PIN AUX4_07_PIN
#define EXP2_06_PIN AUX4_09_PIN
#define EXP2_08_PIN AUX4_10_PIN
#else
/** Smart Adapter (c) RRD
* ------ ------
* 4-09 |10 9 | 4-10 (MISO) 3-03 |10 9 | 3-05 (SCK)
* 4-17 | 8 7 | 4-18 4-12 | 8 7 | 3-06
* 4-16 6 5 | 4-15 4-11 6 5 | 3-04 (MOSI)
* 4-14 | 4 3 | 4-13 3-02 | 4 3 | 4-07
* (GND) 3-07 | 2 1 | 3-01 (5V) (GND) 3-07 | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_09_PIN AUX4_10_PIN
#define EXP1_10_PIN AUX4_09_PIN
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#define EXP2_03_PIN -1 // RESET
#define EXP2_06_PIN AUX4_12_PIN
#define EXP2_08_PIN AUX4_11_PIN
#else
#define EXP2_03_PIN AUX4_07_PIN
#define EXP2_06_PIN AUX4_11_PIN
#define EXP2_08_PIN AUX4_12_PIN
#endif
#endif
#endif
//////////////////////////
@ -752,7 +791,7 @@
#define BTN_EN2 AUX2_04_PIN
#define BTN_ENC AUX2_03_PIN
#define SD_DETECT_PIN AUX3_07_PIN
#define SD_DETECT_PIN AUX3_02_PIN
#define KILL_PIN AUX2_05_PIN
#elif ENABLED(ZONESTAR_LCD)
@ -765,14 +804,14 @@
#elif ENABLED(G3D_PANEL)
#define BEEPER_PIN EXP2_06_PIN
#define BEEPER_PIN EXP1_10_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#define KILL_PIN EXP2_03_PIN
#define BTN_EN1 EXP1_10_PIN
#define BTN_EN2 EXP1_09_PIN
#define BTN_ENC EXP2_08_PIN
#define BTN_EN1 EXP2_06_PIN
#define BTN_EN2 EXP2_08_PIN
#define BTN_ENC EXP1_09_PIN
#elif IS_TFTGLCD_PANEL
@ -785,7 +824,7 @@
#if ENABLED(PANEL_ONE) // Buttons connect directly to AUX-2
#define BTN_EN1 AUX2_03_PIN
#define BTN_EN2 AUX2_04_PIN
#define BTN_ENC AUX3_07_PIN
#define BTN_ENC AUX3_02_PIN
#else
#define BTN_EN1 EXP1_10_PIN
#define BTN_EN2 EXP1_09_PIN
@ -819,15 +858,15 @@
/**
* FYSETC TFT-81050 display pinout
*
* Board Display
* ------ ------
* GND |10 9 | -- 5V |10 9 | GND
* (SD_DET) 49 | 8 7 | RESET RESET | 8 7 | (SD_DET)
* (BTN_EN1) 31 6 5 | 51 (MOSI) (MOSI) 6 5 | (LCD_CS)
* (BTN_EN2) 33 | 4 3 | 53 (SD_CS) (SD_CS) | 4 3 | (MOD_RESET)
* (MISO) 50 | 2 1 | 52 (SCK) (SCK) | 2 1 | (MISO)
* ------ ------
* EXP2 EXP1
* Board Display
* ------ ------
* (MISO) 50 |10 9 | 52 (SCK) 5V |10 9 | GND
* (BTN_EN2) 33 | 8 7 | 53 (SD_CS) RESET | 8 7 | (SD_DET)
* (BTN_EN1) 31 6 5 | 51 (MOSI) (MOSI) 6 5 | (LCD_CS)
* (SD_DET) 49 | 4 3 | RESET (SD_CS) | 4 3 | (MOD_RESET)
* GND | 2 1 | -- (SCK) | 2 1 | (MISO)
* ------ ------
* EXP2
*
* Needs custom cable:
*
@ -852,6 +891,7 @@
#define SD_DETECT_PIN EXP2_04_PIN
#define CLCD_MOD_RESET EXP2_08_PIN
#define CLCD_SPI_CS EXP2_06_PIN
#define CLCD_MOD_RESET EXP2_06_PIN
#define CLCD_SPI_CS EXP2_08_PIN
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050

View File

@ -146,7 +146,7 @@
#define FAN1_PIN -1
//
//filament run out sensor
// Filament Runout Sensor
//
#if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
#define FIL_RUNOUT_PIN 13
@ -162,32 +162,38 @@
#endif
#define SD_DETECT_PIN -1
/*===================================================
* ZMIB Version 1 - EXP1 Connector
* MOSI(D5) TX1(D11) ENA(D12) ENC(D29/A2) 5V
* SCK(D7) RX1(D10) SCS(D4) ENB(D2) GND
*===================================================
* ZMIB Version 2 - EXP1 Connector
* MOSI(D5) TX1(D11) ENA(D12) ENC(D29/A2) 5V
* SCK(D7) RX1(D10) SCS(D3) ENB(D2) GND
*===================================================
* LCD 128x64
*==================================================*/
/** EXP1
* ------
* (MOSI) D5 |10 9 | D7 (SCK)
* (CS) D11 | 8 7 | D10 (DC/D4)
* (EN2) D12 6 5 | D4 or D3 (EN/RS)
* (ENC) D29 | 4 3 | D2 (EN1)
* (GND) | 2 1 | (5V)
* ------
*/
#define EXP1_03_PIN 2
#define EXP1_04_PIN 29
#ifndef IS_ZMIB_V2
#define EXP1_05_PIN 4 // ZMIB V1
#else
#define EXP1_05_PIN 3 // ZMIB V2
#endif
#define EXP1_06_PIN 12
#define EXP1_07_PIN 10
#define EXP1_08_PIN 11
#define EXP1_09_PIN 7
#define EXP1_10_PIN 5
#if ENABLED(ZONESTAR_12864LCD)
//
// LCD 128x64
//
#define LCDSCREEN_NAME "ZONESTAR_12864LCD"
#define LCDSCREEN_NAME "ZONESTAR_12864LCD"
#define FORCE_SOFT_SPI
//#define LCD_SDSS 11
#define LCD_PINS_RS 11 // ST7920_CS_PIN LCD_PIN_RS (PIN4 of LCD module)
#ifdef IS_ZMIB_V2
#define LCD_PINS_ENABLE 3 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module)
#else
#define LCD_PINS_ENABLE 4 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module)
#endif
#define LCD_PINS_D4 10 // ST7920_CLK_PIN LCD_PIN_ENABLE (PIN6 of LCD module)
//#define LCD_SDSS EXP1_08_PIN
#define LCD_PINS_RS EXP1_08_PIN // ST7920_CS_PIN (LCD module pin 4)
#define LCD_PINS_ENABLE EXP1_05_PIN // ST7920_DAT_PIN (LCD module pin 5)
#define LCD_PINS_D4 EXP1_07_PIN // ST7920_CLK_PIN (LCD module pin 6)
#define BOARD_ST7920_DELAY_1 DELAY_2_NOP
#define BOARD_ST7920_DELAY_2 DELAY_2_NOP
@ -199,34 +205,28 @@
//
#define LCDSCREEN_NAME "ZONESTAR 12864OLED"
#define FORCE_SOFT_SPI
#ifdef IS_ZMIB_V2
#define LCD_PINS_RS 3 // RESET
#else
#define LCD_PINS_RS 4 // RESET
#endif
#define LCD_PINS_DC 10 // DC
#define DOGLCD_CS 11 // CS
#define LCD_PINS_RS EXP1_05_PIN
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#if ENABLED(OLED_HW_IIC)
#error "Oops! can't choose HW IIC for ZMIB board!!"
#elif ENABLED(OLED_HW_SPI)
// HW SPI
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
#else
// SW SPI
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
#define DOGLCD_MOSI AVR_MOSI_PIN // SDA
#define DOGLCD_SCK AVR_SCK_PIN // SCK
#define DOGLCD_A0 LCD_PINS_DC
#if DISABLED(OLED_HW_SPI)
#define DOGLCD_MOSI AVR_MOSI_PIN // Software SPI
#define DOGLCD_SCK AVR_SCK_PIN
#endif
#endif
#endif
//
// All the above are also RRDSC with rotary encoder
//
#if IS_RRD_SC
#define BTN_EN1 2
#define BTN_EN2 12
#define BTN_ENC 29
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_04_PIN
#define BEEPER_PIN -1
#define KILL_PIN -1
#endif

View File

@ -186,7 +186,7 @@
#ifdef GTM32_PRO_VB_USE_LCD_BEEPER
// This is pin 32 on J2 FFC40 and pin, goes to the beeper
// on Geeetech's version of RepRapDiscount Smart Controller
// (e.g. on Rostock 301)
// (e.g., on Rostock 301)
#define BEEPER_PIN PE12
#else
// This is the beeper on the board itself

View File

@ -125,7 +125,7 @@
//#define TEMP_0_CS_PIN PE6 // TC2 - CS2
//
// Filament runout sensor
// Filament Runout Sensor
//
#define FIL_RUNOUT_PIN PF11 // MT_DET

View File

@ -315,9 +315,9 @@
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LCD_PINS_DC PC6
#define DOGLCD_CS PD13
#define DOGLCD_A0 PC6
#define LCD_PINS_DC DOGLCD_A0
#define DOGLCD_A0 DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PE14
#define NEOPIXEL_PIN PE15

View File

@ -197,9 +197,10 @@
#define DOGLCD_MOSI EXP2_05_PIN
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define DOGLCD_A0 LCD_PINS_DC
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN

View File

@ -341,9 +341,9 @@
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LCD_PINS_DC PC6
#define DOGLCD_CS PD13
#define DOGLCD_A0 PC6
#define LCD_PINS_DC DOGLCD_A0
#define DOGLCD_A0 DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PE14
#define NEOPIXEL_PIN PE15

View File

@ -224,7 +224,7 @@
#define LCD_PINS_RS EXP1_05_PIN // = LCD_RESET_PIN
#define LCD_PINS_DC EXP1_07_PIN // DC
#define DOGLCD_CS EXP1_08_PIN // CS
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_MOSI EXP1_10_PIN // SDA
#define DOGLCD_SCK EXP1_09_PIN // SCK
// Encoder

View File

@ -352,9 +352,9 @@
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define DOGLCD_A0 LCD_PINS_DC
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN

View File

@ -338,9 +338,9 @@
//#undef SHOW_BOOTSCREEN
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define DOGLCD_A0 LCD_PINS_DC
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN