bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)

Browse Source
This commit is contained in:
yangwenxiong 2020-01-25 16:13:39 +08:00 committed by Scott Lahteine
parent 0d166f9c7d
commit 248b7dfa59
66 changed files with 2086 additions and 217 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
Marlin/src/HAL/HAL_AVR/fastio.h
View File

@ -279,14 +279,25 @@ enum ClockSource2 : char {
*/
// Determine which harware PWMs are already in use
#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
#if PIN_EXISTS(CONTROLLER_FAN)
#define PWM_CHK_FAN_B(P) (P == CONTROLLER_FAN_PIN || P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
#define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
#else
#define PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
#define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P)
#endif
#if ANY_PIN(FAN, FAN1, FAN2)
#if PIN_EXISTS(FAN2)
#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7)
#if PIN_EXISTS(FAN7)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN)
#elif PIN_EXISTS(FAN6)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN)
#elif PIN_EXISTS(FAN5)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN)
#elif PIN_EXISTS(FAN4)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN)
#elif PIN_EXISTS(FAN3)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN)
#elif PIN_EXISTS(FAN2)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN)
#elif PIN_EXISTS(FAN1)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN)

4
Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h
View File

@ -46,6 +46,10 @@
#error "TEMP_4_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
#elif _OLD_TEMP_PIN(TEMP_5)
#error "TEMP_5_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
#elif _OLD_TEMP_PIN(TEMP_6)
#error "TEMP_6_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
#elif _OLD_TEMP_PIN(TEMP_7)
#error "TEMP_7_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
#endif
#undef _OLD_TEMP_PIN

50
Marlin/src/HAL/HAL_SAMD51/HAL.cpp
View File

@ -59,6 +59,16 @@
#else
#define GET_TEMP_5_ADC() -1
#endif
#if HAS_TEMP_ADC_6
#define GET_TEMP_6_ADC() PIN_TO_ADC(TEMP_6_PIN)
#else
#define GET_TEMP_6_ADC() -1
#endif
#if HAS_TEMP_ADC_7
#define GET_TEMP_7_ADC() PIN_TO_ADC(TEMP_7_PIN)
#else
#define GET_TEMP_7_ADC() -1
#endif
#if HAS_TEMP_PROBE
#define GET_PROBE_ADC() PIN_TO_ADC(TEMP_PROBE_PIN)
#else
@ -85,13 +95,15 @@
#define GET_BUTTONS_ADC() -1
#endif
#define IS_ADC_REQUIRED(n) (GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n \
|| GET_TEMP_3_ADC() == n || GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n \
|| GET_PROBE_ADC() == n \
|| GET_BED_ADC() == n \
|| GET_CHAMBER_ADC() == n \
|| GET_FILAMENT_WIDTH_ADC() == n \
|| GET_BUTTONS_ADC() == n)
#define IS_ADC_REQUIRED(n) ( \
GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \
|| GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n || GET_TEMP_6_ADC() == n || GET_TEMP_7_ADC() == n \
|| GET_PROBE_ADC() == n \
|| GET_BED_ADC() == n \
|| GET_CHAMBER_ADC() == n \
|| GET_FILAMENT_WIDTH_ADC() == n \
|| GET_BUTTONS_ADC() == n \
)
#define ADC0_IS_REQUIRED IS_ADC_REQUIRED(0)
#define ADC1_IS_REQUIRED IS_ADC_REQUIRED(1)
@ -151,6 +163,12 @@ uint16_t HAL_adc_result;
#if GET_TEMP_5_ADC() == 0
TEMP_5_PIN,
#endif
#if GET_TEMP_6_ADC() == 0
TEMP_6_PIN,
#endif
#if GET_TEMP_7_ADC() == 0
TEMP_7_PIN,
#endif
#if GET_PROBE_ADC() == 0
TEMP_PROBE_PIN,
#endif
@ -185,6 +203,12 @@ uint16_t HAL_adc_result;
#if GET_TEMP_5_ADC() == 1
TEMP_5_PIN,
#endif
#if GET_TEMP_6_ADC() == 1
TEMP_6_PIN,
#endif
#if GET_TEMP_7_ADC() == 1
TEMP_7_PIN,
#endif
#if GET_PROBE_ADC() == 1
TEMP_PROBE_PIN,
#endif
@ -227,6 +251,12 @@ uint16_t HAL_adc_result;
#if GET_TEMP_5_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_5_PIN) },
#endif
#if GET_TEMP_6_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_6_PIN) },
#endif
#if GET_TEMP_7_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_7_PIN) },
#endif
#if GET_PROBE_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) },
#endif
@ -270,6 +300,12 @@ uint16_t HAL_adc_result;
#if GET_TEMP_5_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_5_PIN) },
#endif
#if GET_TEMP_6_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_6_PIN) },
#endif
#if GET_TEMP_7_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_7_PIN) },
#endif
#if GET_PROBE_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_PROBE_PIN) },
#endif

18
Marlin/src/HAL/HAL_STM32F1/HAL.cpp
View File

@ -118,6 +118,12 @@ const uint8_t adc_pins[] = {
#if HAS_TEMP_ADC_5
TEMP_5_PIN,
#endif
#if HAS_TEMP_ADC_6
TEMP_6_PIN,
#endif
#if HAS_TEMP_ADC_7
TEMP_7_PIN,
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH_PIN,
#endif
@ -160,6 +166,12 @@ enum TEMP_PINS : char {
#if HAS_TEMP_ADC_5
TEMP_5,
#endif
#if HAS_TEMP_ADC_6
TEMP_6,
#endif
#if HAS_TEMP_ADC_7
TEMP_7,
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
FILWIDTH,
#endif
@ -346,6 +358,12 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
#if HAS_TEMP_ADC_5
case TEMP_5_PIN: pin_index = TEMP_5; break;
#endif
#if HAS_TEMP_ADC_6
case TEMP_6_PIN: pin_index = TEMP_6; break;
#endif
#if HAS_TEMP_ADC_7
case TEMP_7_PIN: pin_index = TEMP_7; break;
#endif
#if HAS_JOY_ADC_X
case JOY_X_PIN: pin_index = JOY_X; break;
#endif

6
Marlin/src/core/drivers.h
View File

@ -79,7 +79,8 @@
#define HAS_E_DRIVER(T) ( AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \
|| AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \
|| AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) )
|| AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) \
|| AXIS_DRIVER_TYPE_E6(T) || AXIS_DRIVER_TYPE_E7(T) )
#define HAS_DRIVER(T) ( AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) \
|| AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) \
@ -152,7 +153,8 @@
|| AXIS_HAS_##T(Z3) \
|| AXIS_HAS_##T(E0) || AXIS_HAS_##T(E1) \
|| AXIS_HAS_##T(E2) || AXIS_HAS_##T(E3) \
|| AXIS_HAS_##T(E4) || AXIS_HAS_##T(E5) )
|| AXIS_HAS_##T(E4) || AXIS_HAS_##T(E5) \
|| AXIS_HAS_##T(E6) || AXIS_HAS_##T(E7) )
#define HAS_STEALTHCHOP ANY_AXIS_HAS(STEALTHCHOP)
#define HAS_STALLGUARD ANY_AXIS_HAS(STALLGUARD)

6
Marlin/src/core/language.h
View File

@ -359,6 +359,8 @@
#define LCD_STR_N3 "3"
#define LCD_STR_N4 "4"
#define LCD_STR_N5 "5"
#define LCD_STR_N6 "6"
#define LCD_STR_N7 "7"
#else
#define LCD_FIRST_TOOL '1'
#define LCD_STR_N0 "1"
@ -367,6 +369,8 @@
#define LCD_STR_N3 "4"
#define LCD_STR_N4 "5"
#define LCD_STR_N5 "6"
#define LCD_STR_N6 "7"
#define LCD_STR_N7 "8"
#endif
#define LCD_STR_E0 "E" LCD_STR_N0
@ -375,6 +379,8 @@
#define LCD_STR_E3 "E" LCD_STR_N3
#define LCD_STR_E4 "E" LCD_STR_N4
#define LCD_STR_E5 "E" LCD_STR_N5
#define LCD_STR_E6 "E" LCD_STR_N6
#define LCD_STR_E7 "E" LCD_STR_N7
#include "multi_language.h" // Allow multiple languages

6
Marlin/src/core/types.h
View File

@ -43,11 +43,7 @@ enum AxisEnum : uint8_t {
E_AXIS = 3,
X_HEAD = 4, Y_HEAD = 5, Z_HEAD = 6,
E0_AXIS = 3,
E1_AXIS = 4,
E2_AXIS = 5,
E3_AXIS = 6,
E4_AXIS = 7,
E5_AXIS = 8,
E1_AXIS, E2_AXIS, E3_AXIS, E4_AXIS, E5_AXIS, E6_AXIS, E7_AXIS,
ALL_AXES = 0xFE, NO_AXIS = 0xFF
};

43
Marlin/src/gcode/control/M42.cpp
View File

@ -47,23 +47,38 @@ void GcodeSuite::M42() {
const pin_t pin = GET_PIN_MAP_PIN(pin_index);
#if FAN_COUNT > 0
switch (pin) {
#if HAS_FAN0
case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; return;
#endif
#if HAS_FAN1
case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; return;
#endif
#if HAS_FAN2
case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; return;
#endif
#if HAS_FAN3
case FAN3_PIN: thermalManager.fan_speed[3] = pin_status; return;
#endif
#if HAS_FAN4
case FAN4_PIN: thermalManager.fan_speed[4] = pin_status; return;
#endif
#if HAS_FAN5
case FAN5_PIN: thermalManager.fan_speed[5] = pin_status; return;
#endif
#if HAS_FAN6
case FAN6_PIN: thermalManager.fan_speed[6] = pin_status; return;
#endif
#if HAS_FAN7
case FAN7_PIN: thermalManager.fan_speed[7] = pin_status; return;
#endif
}
#endif
if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err();
pinMode(pin, OUTPUT);
extDigitalWrite(pin, pin_status);
analogWrite(pin, pin_status);
#if FAN_COUNT > 0
switch (pin) {
#if HAS_FAN0
case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; break;
#endif
#if HAS_FAN1
case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; break;
#endif
#if HAS_FAN2
case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; break;
#endif
}
#endif
}

26
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View File

@ -38,7 +38,7 @@
#define M91x_SOME_X (M91x_USE(X) || M91x_USE(X2))
#define M91x_SOME_Y (M91x_USE(Y) || M91x_USE(Y2))
#define M91x_SOME_Z (M91x_USE(Z) || M91x_USE(Z2) || M91x_USE(Z3) || M91x_USE(Z4))
#define M91x_SOME_E (M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) || M91x_USE_E(5))
#define M91x_SOME_E (M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) || M91x_USE_E(5) || M91x_USE_E(6) || M91x_USE_E(7))
#if !M91x_SOME_X && !M91x_SOME_Y && !M91x_SOME_Z && !M91x_SOME_E
#error "MONITOR_DRIVER_STATUS requires at least one TMC2130, 2160, 2208, 2209, 2660, 5130, or 5160."
@ -91,6 +91,12 @@
#if M91x_USE_E(5)
tmc_report_otpw(stepperE5);
#endif
#if M91x_USE_E(6)
tmc_report_otpw(stepperE6);
#endif
#if M91x_USE_E(7)
tmc_report_otpw(stepperE7);
#endif
}
/**
@ -188,6 +194,12 @@
#if M91x_USE_E(5)
if (hasNone || eval == 5 || (hasE && eval < 0)) tmc_clear_otpw(stepperE5);
#endif
#if M91x_USE_E(6)
if (hasNone || eval == 6 || (hasE && eval < 0)) tmc_clear_otpw(stepperE6);
#endif
#if M91x_USE_E(7)
if (hasNone || eval == 7 || (hasE && eval < 0)) tmc_clear_otpw(stepperE7);
#endif
#endif
}
@ -263,6 +275,12 @@
#if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5)
case 5: TMC_SET_PWMTHRS_E(5); break;
#endif
#if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6)
case 6: TMC_SET_PWMTHRS_E(6); break;
#endif
#if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7)
case 7: TMC_SET_PWMTHRS_E(7); break;
#endif
}
#endif // E_STEPPERS
} break;
@ -312,6 +330,12 @@
#if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5)
TMC_SAY_PWMTHRS_E(5);
#endif
#if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6)
TMC_SAY_PWMTHRS_E(6);
#endif
#if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7)
TMC_SAY_PWMTHRS_E(7);
#endif
}
}
#endif // HYBRID_THRESHOLD

2
Marlin/src/inc/Conditionals_adv.h
View File

@ -34,6 +34,8 @@
#undef TEMP_SENSOR_3
#undef TEMP_SENSOR_4
#undef TEMP_SENSOR_5
#undef TEMP_SENSOR_6
#undef TEMP_SENSOR_7
#undef FWRETRACT
#undef PIDTEMP
#undef AUTOTEMP

108
Marlin/src/inc/Conditionals_post.h
View File

@ -341,7 +341,7 @@
* Temp Sensor defines
*/
#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n))
#define ANY_TEMP_SENSOR_IS(n) (TEMP_SENSOR_0 == (n) || TEMP_SENSOR_1 == (n) || TEMP_SENSOR_2 == (n) || TEMP_SENSOR_3 == (n) || TEMP_SENSOR_4 == (n) || TEMP_SENSOR_5 == (n) || TEMP_SENSOR_6 == (n) || TEMP_SENSOR_7 == (n) || TEMP_SENSOR_BED == (n) || TEMP_SENSOR_PROBE == (n) || TEMP_SENSOR_CHAMBER == (n))
#define HAS_USER_THERMISTORS ANY_TEMP_SENSOR_IS(1000)
@ -483,6 +483,44 @@
#undef HEATER_5_MAXTEMP
#endif
#if TEMP_SENSOR_6 == -4
#define HEATER_6_USES_AD8495
#elif TEMP_SENSOR_6 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6."
#elif TEMP_SENSOR_6 == -2
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6."
#elif TEMP_SENSOR_6 == -1
#define HEATER_6_USES_AD595
#elif TEMP_SENSOR_6 > 0
#define THERMISTOR_HEATER_6 TEMP_SENSOR_6
#define HEATER_6_USES_THERMISTOR
#if TEMP_SENSOR_6 == 1000
#define HEATER_6_USER_THERMISTOR
#endif
#else
#undef HEATER_6_MINTEMP
#undef HEATER_6_MAXTEMP
#endif
#if TEMP_SENSOR_7 == -4
#define HEATER_7_USES_AD8495
#elif TEMP_SENSOR_7 == -3
#error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7."
#elif TEMP_SENSOR_7 == -2
#error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7."
#elif TEMP_SENSOR_7 == -1
#define HEATER_7_USES_AD595
#elif TEMP_SENSOR_7 > 0
#define THERMISTOR_HEATER_7 TEMP_SENSOR_7
#define HEATER_7_USES_THERMISTOR
#if TEMP_SENSOR_7 == 1000
#define HEATER_7_USER_THERMISTOR
#endif
#else
#undef HEATER_7_MINTEMP
#undef HEATER_7_MAXTEMP
#endif
#if TEMP_SENSOR_BED == -4
#define HEATER_BED_USES_AD8495
#elif TEMP_SENSOR_BED == -3
@ -538,8 +576,8 @@
#endif
#define HOTEND_USES_THERMISTOR ANY( \
HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, \
HEATER_3_USES_THERMISTOR, HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR)
HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, \
HEATER_4_USES_THERMISTOR, HEATER_5_USES_THERMISTOR, HEATER_6_USES_THERMISTOR, HEATER_7_USES_THERMISTOR )
/**
* Default hotend offsets, if not defined
@ -1025,6 +1063,18 @@
#define HAS_E5_MICROSTEPS (PIN_EXISTS(E5_MS1))
#define HAS_SOLENOID_5 (PIN_EXISTS(SOL5))
#define HAS_E6_ENABLE (PIN_EXISTS(E6_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6)))
#define HAS_E6_DIR (PIN_EXISTS(E6_DIR))
#define HAS_E6_STEP (PIN_EXISTS(E6_STEP))
#define HAS_E6_MICROSTEPS (PIN_EXISTS(E6_MS1))
#define HAS_SOLENOID_6 (PIN_EXISTS(SOL6))
#define HAS_E7_ENABLE (PIN_EXISTS(E7_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7)))
#define HAS_E7_DIR (PIN_EXISTS(E7_DIR))
#define HAS_E7_STEP (PIN_EXISTS(E7_STEP))
#define HAS_E7_MICROSTEPS (PIN_EXISTS(E7_MS1))
#define HAS_SOLENOID_7 (PIN_EXISTS(SOL7))
// Trinamic Stepper Drivers
#if HAS_TRINAMIC
#define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
@ -1095,6 +1145,8 @@
#define HAS_TEMP_ADC_3 HAS_ADC_TEST(3)
#define HAS_TEMP_ADC_4 HAS_ADC_TEST(4)
#define HAS_TEMP_ADC_5 HAS_ADC_TEST(5)
#define HAS_TEMP_ADC_6 HAS_ADC_TEST(6)
#define HAS_TEMP_ADC_7 HAS_ADC_TEST(7)
#define HAS_TEMP_ADC_BED HAS_ADC_TEST(BED)
#define HAS_TEMP_ADC_PROBE HAS_ADC_TEST(PROBE)
#define HAS_TEMP_ADC_CHAMBER HAS_ADC_TEST(CHAMBER)
@ -1118,6 +1170,8 @@
#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
#define HAS_HEATER_4 (PIN_EXISTS(HEATER_4))
#define HAS_HEATER_5 (PIN_EXISTS(HEATER_5))
#define HAS_HEATER_6 (PIN_EXISTS(HEATER_6))
#define HAS_HEATER_7 (PIN_EXISTS(HEATER_7))
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
// Shorthand for common combinations
@ -1146,12 +1200,14 @@
#define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
#define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN))
#define HAS_AUTO_FAN_5 (HOTENDS > 5 && PIN_EXISTS(E5_AUTO_FAN))
#define HAS_AUTO_FAN_6 (HOTENDS > 6 && PIN_EXISTS(E6_AUTO_FAN))
#define HAS_AUTO_FAN_7 (HOTENDS > 7 && PIN_EXISTS(E7_AUTO_FAN))
#define HAS_AUTO_CHAMBER_FAN (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN))
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_CHAMBER_FAN)
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_FAN_6 || HAS_AUTO_FAN_7 || HAS_AUTO_CHAMBER_FAN)
#define _FANOVERLAP(A,B) (A##_AUTO_FAN_PIN == E##B##_AUTO_FAN_PIN)
#if HAS_AUTO_FAN
#define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5))
#define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5) || _FANOVERLAP(CHAMBER,6) || _FANOVERLAP(CHAMBER,7))
#endif
#if !HAS_TEMP_SENSOR
@ -1164,8 +1220,14 @@
// Other fans
#define HAS_FAN0 (PIN_EXISTS(FAN))
#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN && E4_AUTO_FAN_PIN != FAN1_PIN && E5_AUTO_FAN_PIN != FAN1_PIN)
#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN && E4_AUTO_FAN_PIN != FAN2_PIN && E5_AUTO_FAN_PIN != FAN2_PIN)
#define _HAS_FAN(P) (PIN_EXISTS(FAN_##P) && CONTROLLER_FAN_PIN != FAN_##P##_PIN && E0_AUTO_FAN_PIN != FAN_##P##_PIN && E1_AUTO_FAN_PIN != FAN_##P##_PIN && E2_AUTO_FAN_PIN != FAN_##P##_PIN && E3_AUTO_FAN_PIN != FAN_##P##_PIN && E4_AUTO_FAN_PIN != FAN_##P##_PIN && E5_AUTO_FAN_PIN != FAN_##P##_PIN && E6_AUTO_FAN_PIN != FAN_##P##_PIN && E7_AUTO_FAN_PIN != FAN_##P##_PIN)
#define HAS_FAN1 _HAS_FAN(1)
#define HAS_FAN2 _HAS_FAN(2)
#define HAS_FAN3 _HAS_FAN(3)
#define HAS_FAN4 _HAS_FAN(4)
#define HAS_FAN5 _HAS_FAN(5)
#define HAS_FAN6 _HAS_FAN(6)
#define HAS_FAN7 _HAS_FAN(7)
#define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN))
// Servos
@ -1203,7 +1265,7 @@
#define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
#define HAS_SOME_Z_MICROSTEPS (HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_Z4_MICROSTEPS)
#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS)
#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS || HAS_E6_MICROSTEPS || HAS_E7_MICROSTEPS)
#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_SOME_Z_MICROSTEPS || HAS_SOME_E_MICROSTEPS)
#if HAS_MICROSTEPS
@ -1278,26 +1340,27 @@
#if HAS_HEATER_0 && !defined(HEATER_0_INVERTING)
#define HEATER_0_INVERTING false
#endif
#if HAS_HEATER_1 && !defined(HEATER_1_INVERTING)
#define HEATER_1_INVERTING false
#endif
#if HAS_HEATER_2 && !defined(HEATER_2_INVERTING)
#define HEATER_2_INVERTING false
#endif
#if HAS_HEATER_3 && !defined(HEATER_3_INVERTING)
#define HEATER_3_INVERTING false
#endif
#if HAS_HEATER_4 && !defined(HEATER_4_INVERTING)
#define HEATER_4_INVERTING false
#endif
#if HAS_HEATER_5 && !defined(HEATER_5_INVERTING)
#define HEATER_5_INVERTING false
#endif
#if HAS_HEATER_6 && !defined(HEATER_6_INVERTING)
#define HEATER_6_INVERTING false
#endif
#if HAS_HEATER_7 && !defined(HEATER_7_INVERTING)
#define HEATER_7_INVERTING false
#endif
/**
* Helper Macros for heaters and extruder fan
@ -1314,6 +1377,12 @@
#define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, (v) ^ HEATER_4_INVERTING)
#if HOTENDS > 5
#define WRITE_HEATER_5(v) WRITE(HEATER_5_PIN, (v) ^ HEATER_5_INVERTING)
#if HOTENDS > 6
#define WRITE_HEATER_6(v) WRITE(HEATER_6_PIN, (v) ^ HEATER_6_INVERTING)
#if HOTENDS > 7
#define WRITE_HEATER_7(v) WRITE(HEATER_7_PIN, (v) ^ HEATER_7_INVERTING)
#endif // HOTENDS > 7
#endif // HOTENDS > 6
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
@ -1365,7 +1434,17 @@
#define FAN_INVERTING false
#endif
#if HAS_FAN2
#if HAS_FAN7
#define FAN_COUNT 8
#elif HAS_FAN6
#define FAN_COUNT 7
#elif HAS_FAN5
#define FAN_COUNT 6
#elif HAS_FAN4
#define FAN_COUNT 5
#elif HAS_FAN3
#define FAN_COUNT 4
#elif HAS_FAN2
#define FAN_COUNT 3
#elif HAS_FAN1
#define FAN_COUNT 2
@ -1640,7 +1719,6 @@
#define HAS_FIXED_3POINT
#endif
/**
* Buzzer/Speaker
*/

104
Marlin/src/inc/SanityCheck.h
View File

@ -294,19 +294,19 @@
#elif defined(HAVE_L6470DRIVER)
#error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC)
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) || defined(E6_IS_TMC) || defined(E7_IS_TMC)
#error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X)
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X) || defined(E6_IS_TMC26X) || defined(E7_IS_TMC26X)
#error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130)
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130) || defined(E6_IS_TMC2130) || defined(E7_IS_TMC2130)
#error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208)
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) || defined(E6_IS_TMC2208) || defined(E7_IS_TMC2208)
#error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470)
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) || defined(E6_IS_L6470) || defined(E7_IS_L6470)
#error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
#elif defined(AUTOMATIC_CURRENT_CONTROL)
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
@ -752,8 +752,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
*/
#if EXTRUDERS > 1
#if EXTRUDERS > 6
#error "Marlin supports a maximum of 6 EXTRUDERS."
#if EXTRUDERS > 8
#error "Marlin supports a maximum of 8 EXTRUDERS."
#endif
#if ENABLED(HEATERS_PARALLEL)
@ -1494,6 +1494,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_5_USER_THERMISTOR) && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA))
#error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_6_USER_THERMISTOR) && !(defined(HOTEND6_PULLUP_RESISTOR_OHMS) && defined(HOTEND6_RESISTANCE_25C_OHMS) && defined(HOTEND6_BETA))
#error "TEMP_SENSOR_6 1000 requires HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS and HOTEND6_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_7_USER_THERMISTOR) && !(defined(HOTEND7_PULLUP_RESISTOR_OHMS) && defined(HOTEND7_RESISTANCE_25C_OHMS) && defined(HOTEND7_BETA))
#error "TEMP_SENSOR_7 1000 requires HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS and HOTEND7_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_BED_USER_THERMISTOR) && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA))
#error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h."
#elif ENABLED(HEATER_CHAMBER_USER_THERMISTOR) && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA))
@ -1564,13 +1568,45 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#elif !PIN_EXISTS(TEMP_5)
#error "TEMP_5_PIN not defined for this board."
#endif
#if HOTENDS > 6
#if TEMP_SENSOR_6 == 0
#error "TEMP_SENSOR_6 is required with 6 HOTENDS."
#elif !HAS_HEATER_6
#error "HEATER_6_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_6)
#error "TEMP_6_PIN not defined for this board."
#endif
#if HOTENDS > 7
#if TEMP_SENSOR_7 == 0
#error "TEMP_SENSOR_7 is required with 7 HOTENDS."
#elif !HAS_HEATER_7
#error "HEATER_7_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_7)
#error "TEMP_7_PIN not defined for this board."
#endif
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 7 HOTENDS."
#endif
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 6 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 6 HOTENDS."
#endif
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS."
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 5 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 5 HOTENDS."
#endif
#elif TEMP_SENSOR_4 != 0
#error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS."
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 4 HOTENDS."
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 4 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 4 HOTENDS."
#endif
#elif TEMP_SENSOR_3 != 0
#error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS."
@ -1578,6 +1614,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS."
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 3 HOTENDS."
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 3 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 3 HOTENDS."
#endif
#elif TEMP_SENSOR_2 != 0
#error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS."
@ -1587,6 +1627,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS."
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 2 HOTENDS."
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 2 HOTENDS."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 2 HOTENDS."
#endif
#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
#error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND."
@ -1598,6 +1642,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND."
#elif TEMP_SENSOR_5 != 0
#error "TEMP_SENSOR_5 shouldn't be set with only 1 HOTEND."
#elif TEMP_SENSOR_6 != 0
#error "TEMP_SENSOR_6 shouldn't be set with only 1 HOTEND."
#elif TEMP_SENSOR_7 != 0
#error "TEMP_SENSOR_7 shouldn't be set with only 1 HOTEND."
#endif
#if TEMP_SENSOR_PROBE
@ -1680,6 +1728,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
#error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 6
#if !(PIN_EXISTS(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
#error "E6_STEP_PIN, E6_DIR_PIN, or E6_ENABLE_PIN not defined for this board."
#endif
#if E_STEPPERS > 7
#if !(PIN_EXISTS(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
#error "E7_STEP_PIN, E7_DIR_PIN, or E7_ENABLE_PIN not defined for this board."
#endif
#endif // E_STEPPERS > 7
#endif // E_STEPPERS > 6
#endif // E_STEPPERS > 5
#endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3
@ -2008,6 +2066,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "An SPI driven TMC driver on E4 requires E4_CS_PIN."
#elif INVALID_TMC_SPI(E5)
#error "An SPI driven TMC driver on E5 requires E5_CS_PIN."
#elif INVALID_TMC_SPI(E6)
#error "An SPI driven TMC driver on E6 requires E6_CS_PIN."
#elif INVALID_TMC_SPI(E7)
#error "An SPI driven TMC driver on E7 requires E7_CS_PIN."
#endif
#undef INVALID_TMC_SPI
@ -2041,6 +2103,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TMC2208 or TMC2209 on E4 requires E4_HARDWARE_SERIAL or E4_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E5)
#error "TMC2208 or TMC2209 on E5 requires E5_HARDWARE_SERIAL or E5_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E6)
#error "TMC2208 or TMC2209 on E6 requires E6_HARDWARE_SERIAL or E6_SERIAL_(RX|TX)_PIN."
#elif INVALID_TMC_UART(E7)
#error "TMC2208 or TMC2209 on E7 requires E7_HARDWARE_SERIAL or E7_SERIAL_(RX|TX)_PIN."
#endif
#undef INVALID_TMC_UART
@ -2192,7 +2258,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|| (IN_CHAIN(Z3) && !PIN_EXISTS(Z3_CS)) || (IN_CHAIN(E0) && !PIN_EXISTS(E0_CS)) \
|| (IN_CHAIN(E1) && !PIN_EXISTS(E1_CS)) || (IN_CHAIN(E2) && !PIN_EXISTS(E2_CS)) \
|| (IN_CHAIN(E3) && !PIN_EXISTS(E3_CS)) || (IN_CHAIN(E4) && !PIN_EXISTS(E4_CS)) \
|| (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS))
|| (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS)) || (IN_CHAIN(E6) && !PIN_EXISTS(E6_CS)) \
|| (IN_CHAIN(E7) && !PIN_EXISTS(E7_CS))
#error "All chained TMC drivers need a CS pin."
#else
#if IN_CHAIN(X)
@ -2221,6 +2288,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#define CS_COMPARE E4_CS_PIN
#elif IN_CHAIN(E5)
#define CS_COMPARE E5_CS_PIN
#elif IN_CHAIN(E6)
#define CS_COMPARE E6_CS_PIN
#elif IN_CHAIN(E7)
#define CS_COMPARE E7_CS_PIN
#endif
#if (IN_CHAIN(X) && X_CS_PIN != CS_COMPARE) || (IN_CHAIN(Y) && Y_CS_PIN != CS_COMPARE) \
|| (IN_CHAIN(Z) && Z_CS_PIN != CS_COMPARE) || (IN_CHAIN(X2) && X2_CS_PIN != CS_COMPARE) \
@ -2228,7 +2299,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|| (IN_CHAIN(Z3) && Z3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E0) && E0_CS_PIN != CS_COMPARE) \
|| (IN_CHAIN(E1) && E1_CS_PIN != CS_COMPARE) || (IN_CHAIN(E2) && E2_CS_PIN != CS_COMPARE) \
|| (IN_CHAIN(E3) && E3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E4) && E4_CS_PIN != CS_COMPARE) \
|| (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE)
|| (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE) || (IN_CHAIN(E6) && E6_CS_PIN != CS_COMPARE) \
|| (IN_CHAIN(E7) && E7_CS_PIN != CS_COMPARE)
#error "All chained TMC drivers must use the same CS pin."
#endif
#endif
@ -2521,12 +2593,26 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "SPINDLE_LASER_PWM_PIN conflicts with E4_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E5_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E5_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E6_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E6_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(E7_AUTO_FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with E7_AUTO_FAN_PIN."
#elif _PIN_CONFLICT(FAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN."
#elif _PIN_CONFLICT(FAN1)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN."
#elif _PIN_CONFLICT(FAN2)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN2_PIN."
#elif _PIN_CONFLICT(FAN3)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN3_PIN."
#elif _PIN_CONFLICT(FAN4)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN4_PIN."
#elif _PIN_CONFLICT(FAN5)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN5_PIN."
#elif _PIN_CONFLICT(FAN6)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN6_PIN."
#elif _PIN_CONFLICT(FAN7)
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN7_PIN."
#elif _PIN_CONFLICT(CONTROLLERFAN)
#error "SPINDLE_LASER_PWM_PIN conflicts with CONTROLLERFAN_PIN."
#elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_XY)

15
Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
View File

@ -1092,6 +1092,21 @@ void MarlinUI::draw_status_screen() {
#if HAS_FAN2
|| thermalManager.fan_speed[2]
#endif
#if HAS_FAN3
|| thermalManager.fan_speed[3]
#endif
#if HAS_FAN4
|| thermalManager.fan_speed[4]
#endif
#if HAS_FAN5
|| thermalManager.fan_speed[5]
#endif
#if HAS_FAN6
|| thermalManager.fan_speed[6]
#endif
#if HAS_FAN7
|| thermalManager.fan_speed[7]
#endif
) leds |= LED_C;
#endif // FAN_COUNT > 0

4
Marlin/src/lcd/extensible_ui/ui_api.cpp
View File

@ -912,7 +912,7 @@ namespace ExtUI {
#endif
{
#if HOTENDS
static constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP);
static constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
const int16_t e = heater - H0;
thermalManager.setTargetHotend(LROUND(constrain(value, 0, heater_maxtemp[e] - 15)), e);
#endif
@ -924,7 +924,7 @@ namespace ExtUI {
value *= TOUCH_UI_LCD_TEMP_SCALING;
#endif
#if HOTENDS
constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP);
constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
const int16_t e = extruder - E0;
enableHeater(extruder);
thermalManager.setTargetHotend(LROUND(constrain(value, 0, heater_maxtemp[e] - 15)), e);

2
Marlin/src/lcd/extensible_ui/ui_api.h
View File

@ -55,7 +55,7 @@ namespace ExtUI {
enum axis_t : uint8_t { X, Y, Z };
enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5 };
enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED, CHAMBER };
enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5 };
enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7 };
enum result_t : uint8_t { PID_BAD_EXTRUDER_NUM, PID_TEMP_TOO_HIGH, PID_TUNING_TIMEOUT, PID_DONE };
constexpr uint8_t extruderCount = EXTRUDERS;

2
Marlin/src/lcd/language/language_an.h
View File

@ -93,7 +93,7 @@ namespace Language_an {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Boquilla ~");
PROGMEM Language_Str MSG_BED = _UxGT("Base");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ixoriador");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ixoriador =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ixoriador ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Fluxo");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Fluxo ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");

2
Marlin/src/lcd/language/language_bg.h
View File

@ -83,7 +83,7 @@ namespace Language_bg {
PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" Дюза ~");
PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" Легло");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Вентилатор");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Вентилатор =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Вентилатор ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Поток");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Поток ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Управление");

2
Marlin/src/lcd/language/language_ca.h
View File

@ -94,7 +94,7 @@ namespace Language_ca {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~");
PROGMEM Language_Str MSG_BED = _UxGT("Llit");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. Ventilador");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventilador =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventilador ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flux");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flux ~");
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VViatge min");

6
Marlin/src/lcd/language/language_cz.h
View File

@ -251,10 +251,10 @@ namespace Language_cz {
PROGMEM Language_Str MSG_BED = _UxGT("Podložka");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Komora");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Rychlost vent.");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rychlost vent. =");
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ulož. vent. =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rychlost vent. ~");
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ulož. vent. ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Rychlost ex. vent.");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rychlost ex. vent. =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rychlost ex. vent. ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Průtok");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Průtok ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Ovládaní");

2
Marlin/src/lcd/language/language_da.h
View File

@ -84,7 +84,7 @@ namespace Language_da {
PROGMEM Language_Str MSG_BED = _UxGT("Plade");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Blæser hastighed");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Blæser hastighed =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrol");
PROGMEM Language_Str MSG_MIN = _UxGT(" \002 Min");
PROGMEM Language_Str MSG_MAX = _UxGT(" \002 Max");

2
Marlin/src/lcd/language/language_el.h
View File

@ -91,7 +91,7 @@ namespace Language_el {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Ακροφύσιο ~");
PROGMEM Language_Str MSG_BED = _UxGT("Κλίνη");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ταχύτητα ανεμιστήρα");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Ροή");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Ροή ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Έλεγχος");

2
Marlin/src/lcd/language/language_el_gr.h
View File

@ -92,7 +92,7 @@ namespace Language_el_gr {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Ακροφύσιο ~");
PROGMEM Language_Str MSG_BED = _UxGT("Κλίνη");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ταχύτητα ανεμιστήρα");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ταχύτητα ανεμιστήρα ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Ροή");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Ροή ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Έλεγχος");

6
Marlin/src/lcd/language/language_en.h
View File

@ -242,10 +242,10 @@ namespace Language_en {
PROGMEM Language_Str MSG_BED = _UxGT("Bed");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Enclosure");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Speed");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Speed =");
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Speed ~");
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra Fan Speed");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra Fan Speed =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra Fan Speed ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flow");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");

4
Marlin/src/lcd/language/language_es.h
View File

@ -240,9 +240,9 @@ namespace Language_es {
PROGMEM Language_Str MSG_BED = _UxGT("Cama");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Recinto");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Ventilador");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ventilador =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Ventilador ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Vel. Ext. ventilador");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Vel. Ext. ventilador =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Vel. Ext. ventilador ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flujo");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flujo ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");

4
Marlin/src/lcd/language/language_eu.h
View File

@ -147,9 +147,9 @@ namespace Language_eu {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Pita ~");
PROGMEM Language_Str MSG_BED = _UxGT("Ohea");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Haizagailu abiadura");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Haizagailu abiadura =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Haizagailu abiadura ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Haiz.gehig. abiadura");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Haiz.gehig. abiadura =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Haiz.gehig. abiadura ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Fluxua");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Fluxua ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrola");

2
Marlin/src/lcd/language/language_fi.h
View File

@ -79,7 +79,7 @@ namespace Language_fi {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Suutin ~");
PROGMEM Language_Str MSG_BED = _UxGT("Alusta");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Tuul. nopeus");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tuul. nopeus =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tuul. nopeus ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Virtaus");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Virtaus ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrolli");

6
Marlin/src/lcd/language/language_fr.h
View File

@ -235,10 +235,10 @@ namespace Language_fr {
PROGMEM Language_Str MSG_BED = _UxGT("Lit");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Caisson");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vit. ventil. "); // 15 car. max
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vit. ventil. =");
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Vit. enreg. =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vit. ventil. ~");
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Vit. enreg. ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra ventil. ");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra ventil. =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra ventil. ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flux");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flux ~");

6
Marlin/src/lcd/language/language_it.h
View File

@ -240,10 +240,10 @@ namespace Language_it {
PROGMEM Language_Str MSG_BED = _UxGT("Piatto");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Camera");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. ventola"); // Max 15 characters
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventola ="); // Max 15 characters
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ventola mem. ="); // Max 15 characters
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventola ~"); // Max 15 characters
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Ventola mem. ~"); // Max 15 characters
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra vel.vent."); // Max 15 characters
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra v.vent. ="); // Max 15 characters
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra v.vent. ~"); // Max 15 characters
PROGMEM Language_Str MSG_FLOW = _UxGT("Flusso");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flusso ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Controllo");

4
Marlin/src/lcd/language/language_ko_KR.h
View File

@ -77,9 +77,9 @@ namespace Language_ko_KR {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("노즐 ~");
PROGMEM Language_Str MSG_BED = _UxGT("베드");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("펜 속도");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("펜 속도 =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("펜 속도 ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("엑스트라 펜 속도");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("엑스트라 펜 속도 =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("엑스트라 펜 속도 ~");
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("온도");
PROGMEM Language_Str MSG_MOTION = _UxGT("동작");
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("설정 저장하기");

2
Marlin/src/lcd/language/language_nl.h
View File

@ -99,7 +99,7 @@ namespace Language_nl {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~");
PROGMEM Language_Str MSG_BED = _UxGT("Bed");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan snelheid");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan snelheid =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan snelheid ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flow");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");

4
Marlin/src/lcd/language/language_pl.h
View File

@ -240,9 +240,9 @@ namespace Language_pl {
PROGMEM Language_Str MSG_BED = _UxGT("Stół");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Obudowa");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Obroty wiatraka");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Obroty wiatraka =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Obroty wiatraka ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Obroty dodatkowego wiatraka");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wiatraka =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wiatraka ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Przepływ");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Przepływ ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Ustawienia");

2
Marlin/src/lcd/language/language_pt.h
View File

@ -89,7 +89,7 @@ namespace Language_pt {
PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" Bico ~");
PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" Base");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. ventoinha");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventoinha =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. ventoinha ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Fluxo");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Fluxo ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Controlo");

4
Marlin/src/lcd/language/language_pt_br.h
View File

@ -207,9 +207,9 @@ namespace Language_pt_br {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Bocal ~");
PROGMEM Language_Str MSG_BED = _UxGT("Mesa");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Vel. Ventoinha");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventoinha =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Vel. Ventoinha ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("+Vel. Ventoinha");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("+Vel. Ventoinha =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("+Vel. Ventoinha ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Vazão");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Vazão ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Controle");

4
Marlin/src/lcd/language/language_sk.h
View File

@ -243,9 +243,9 @@ namespace Language_sk {
PROGMEM Language_Str MSG_BED = _UxGT("Podložka");
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Komora");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Rýchlosť vent.");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rýchlosť vent. =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Rýchlosť vent. ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Rýchlosť ex. vent.");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rýchlosť ex. vent. =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Rýchlosť ex. vent. ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Prietok");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Prietok ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Ovládanie");

4
Marlin/src/lcd/language/language_tr.h
View File

@ -210,9 +210,9 @@ namespace Language_tr {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozul ~");
PROGMEM Language_Str MSG_BED = _UxGT("Tabla");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Hızı");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Hızı =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Hızı ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Ekstra Fan Hızı");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Ekstra Fan Hızı =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Ekstra Fan Hızı ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Akış");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Akış ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrol");

2
Marlin/src/lcd/language/language_uk.h
View File

@ -92,7 +92,7 @@ namespace Language_uk {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Сопло ~");
PROGMEM Language_Str MSG_BED = _UxGT("Стіл");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Охолодж.");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Охолодж. =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Охолодж. ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("Потік");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Потік ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Налаштування");

4
Marlin/src/lcd/language/language_vi.h
View File

@ -210,9 +210,9 @@ namespace Language_vi {
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Đầu phun ~"); // Nozzle
PROGMEM Language_Str MSG_BED = _UxGT("Bàn"); // bed
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Tốc độ quạt"); // fan speed
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ="); // fan speed
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Tốc độ quạt ~"); // fan speed
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Tốc độ quạt phụ"); // Extra fan speed
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ="); // Extra fan speed
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Tốc độ quạt phụ ~"); // Extra fan speed
PROGMEM Language_Str MSG_FLOW = _UxGT("Lưu Lượng");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Lưu Lượng ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Điều khiển"); // Control

4
Marlin/src/lcd/language/language_zh_CN.h
View File

@ -187,9 +187,9 @@ namespace Language_zh_CN {
PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 喷嘴 ~"); //"Nozzle" 噴嘴
PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 热床"); //"Bed"
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); //"Fan speed"
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ="); //"Fan speed"
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); //"Fan speed"
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed"
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ="); // "Extra fan speed"
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed"
PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); //"Flow"
PROGMEM Language_Str MSG_FLOW_N = _UxGT("挤出速率 ~"); //"Flow"
PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control"

4
Marlin/src/lcd/language/language_zh_TW.h
View File

@ -187,9 +187,9 @@ namespace Language_zh_TW {
PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴 ~");
PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); //"Bed"
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("風扇速率"); //"Fan speed"
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("風扇速率 =");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("風扇速率 ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("額外風扇速率"); // "Extra fan speed"
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 =");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 ~");
PROGMEM Language_Str MSG_FLOW = _UxGT("擠出速率");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("擠出速率 ~"); //"Flow"
PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control"

2
Marlin/src/lcd/menu/menu.h
View File

@ -30,7 +30,7 @@
extern int8_t encoderLine, encoderTopLine, screen_items;
#if HOTENDS
constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP);
constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
#endif
void scroll_screen(const uint8_t limit, const bool is_menu);

12
Marlin/src/lcd/menu/menu_advanced.cpp
View File

@ -245,6 +245,12 @@ void menu_cancelobject();
DEFINE_PIDTEMP_FUNCS(4);
#if HOTENDS > 5
DEFINE_PIDTEMP_FUNCS(5);
#if HOTENDS > 6
DEFINE_PIDTEMP_FUNCS(6);
#if HOTENDS > 7
DEFINE_PIDTEMP_FUNCS(7);
#endif // HOTENDS > 7
#endif // HOTENDS > 6
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
@ -330,6 +336,12 @@ void menu_cancelobject();
PID_EDIT_MENU_ITEMS(4);
#if HOTENDS > 5
PID_EDIT_MENU_ITEMS(5);
#if HOTENDS > 6
PID_EDIT_MENU_ITEMS(6);
#if HOTENDS > 7
PID_EDIT_MENU_ITEMS(7);
#endif // HOTENDS > 7
#endif // HOTENDS > 6
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3

18
Marlin/src/lcd/menu/menu_info.cpp
View File

@ -152,6 +152,24 @@ void menu_info_thermistors() {
VALUE_ITEM_P(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_5_MAXTEMP), SS_LEFT);
#endif
#if TEMP_SENSOR_6 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_6
#include "../thermistornames.h"
STATIC_ITEM_P(PSTR(LCD_STR_E6 ": " THERMISTOR_NAME), SS_INVERT);
VALUE_ITEM_P(MSG_INFO_MIN_TEMP, STRINGIFY(HEATER_6_MINTEMP), SS_LEFT);
VALUE_ITEM_P(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_6_MAXTEMP), SS_LEFT);
#endif
#if TEMP_SENSOR_7 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_7
#include "../thermistornames.h"
STATIC_ITEM_P(PSTR(LCD_STR_E7 ": " THERMISTOR_NAME), SS_INVERT);
VALUE_ITEM_P(MSG_INFO_MIN_TEMP, STRINGIFY(HEATER_7_MINTEMP), SS_LEFT);
VALUE_ITEM_P(MSG_INFO_MAX_TEMP, STRINGIFY(HEATER_7_MAXTEMP), SS_LEFT);
#endif
#if EXTRUDERS
{
STATIC_ITEM(

77
Marlin/src/lcd/menu/menu_temperature.cpp
View File

@ -198,33 +198,72 @@ void menu_temperature() {
// Fan Speed:
//
#if FAN_COUNT > 0
auto on_fan_update = []{
thermalManager.set_fan_speed(MenuItemBase::itemIndex, editable.uint8);
};
#if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7
auto fan_edit_items = [&](const uint8_t f) {
editable.uint8 = thermalManager.fan_speed[f];
EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255);
#endif
};
#endif
#define SNFAN(N) (ENABLED(SINGLENOZZLE) && !HAS_FAN##N && EXTRUDERS > N)
#if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7)
auto singlenozzle_item = [&](const uint8_t f) {
editable.uint8 = thermalManager.fan_speed[f];
EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
};
#endif
#if HAS_FAN0
editable.uint8 = thermalManager.fan_speed[0];
EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(0, editable.uint8); });
EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
#endif
#endif
#if HAS_FAN1
editable.uint8 = thermalManager.fan_speed[1];
EDIT_ITEM_FAST_N(percent, 2, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, 2, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[1], 3, 255);
#endif
#elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 1
editable.uint8 = thermalManager.fan_speed[1];
EDIT_ITEM_FAST_N(percent, 2, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); });
fan_edit_items(1);
#elif SNFAN(1)
singlenozzle_item(1);
#endif
#if HAS_FAN2
editable.uint8 = thermalManager.fan_speed[2];
EDIT_ITEM_FAST_N(percent, 3, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, 3, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[2], 3, 255);
#endif
#elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 2
editable.uint8 = thermalManager.fan_speed[2];
EDIT_ITEM_FAST_N(percent, 3, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); });
fan_edit_items(2);
#elif SNFAN(2)
singlenozzle_item(1);
#endif
#if HAS_FAN3
fan_edit_items(3);
#elif SNFAN(3)
singlenozzle_item(1);
#endif
#if HAS_FAN4
fan_edit_items(4);
#elif SNFAN(4)
singlenozzle_item(1);
#endif
#if HAS_FAN5
fan_edit_items(5);
#elif SNFAN(5)
singlenozzle_item(1);
#endif
#if HAS_FAN6
fan_edit_items(6);
#elif SNFAN(6)
singlenozzle_item(1);
#endif
#if HAS_FAN7
fan_edit_items(7);
#elif SNFAN(7)
singlenozzle_item(1);
#endif
#endif // FAN_COUNT > 0
#if HAS_TEMP_HOTEND
@ -232,7 +271,7 @@ void menu_temperature() {
//
// Preheat for Material 1 and 2
//
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || HAS_HEATED_BED
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || TEMP_SENSOR_5 != 0 || TEMP_SENSOR_6 != 0 || TEMP_SENSOR_7 != 0 || HAS_HEATED_BED
SUBMENU(MSG_PREHEAT_1, menu_preheat_m1);
SUBMENU(MSG_PREHEAT_2, menu_preheat_m2);
#else

18
Marlin/src/lcd/menu/menu_tmc.cpp
View File

@ -79,6 +79,12 @@ void menu_tmc_current() {
#if AXIS_IS_TMC(E5)
TMC_EDIT_STORED_I_RMS(E5, LCD_STR_E5);
#endif
#if AXIS_IS_TMC(E6)
TMC_EDIT_STORED_I_RMS(E6, LCD_STR_E6);
#endif
#if AXIS_IS_TMC(E7)
TMC_EDIT_STORED_I_RMS(E7, LCD_STR_E7);
#endif
END_MENU();
}
@ -131,6 +137,12 @@ void menu_tmc_current() {
#if AXIS_HAS_STEALTHCHOP(E5)
TMC_EDIT_STORED_HYBRID_THRS(E5, LCD_STR_E5);
#endif
#if AXIS_HAS_STEALTHCHOP(E6)
TMC_EDIT_STORED_HYBRID_THRS(E6, LCD_STR_E6);
#endif
#if AXIS_HAS_STEALTHCHOP(E7)
TMC_EDIT_STORED_HYBRID_THRS(E7, LCD_STR_E7);
#endif
END_MENU();
}
@ -210,6 +222,12 @@ void menu_tmc_current() {
#if AXIS_HAS_STEALTHCHOP(E5)
TMC_EDIT_STEP_MODE(E5, LCD_STR_E5);
#endif
#if AXIS_HAS_STEALTHCHOP(E6)
TMC_EDIT_STEP_MODE(E6, LCD_STR_E6);
#endif
#if AXIS_HAS_STEALTHCHOP(E7)
TMC_EDIT_STEP_MODE(E7, LCD_STR_E7);
#endif
END_MENU();
}

75
Marlin/src/lcd/menu/menu_tune.cpp
View File

@ -147,33 +147,72 @@ void menu_tune() {
// Fan Speed:
//
#if FAN_COUNT > 0
auto on_fan_update = []{
thermalManager.set_fan_speed(MenuItemBase::itemIndex, editable.uint8);
};
#if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7
auto fan_edit_items = [&](const uint8_t f) {
editable.uint8 = thermalManager.fan_speed[f];
EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255);
#endif
};
#endif
#define SNFAN(N) (ENABLED(SINGLENOZZLE) && !HAS_FAN##N && EXTRUDERS > N)
#if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7)
auto singlenozzle_item = [&](const uint8_t f) {
editable.uint8 = thermalManager.fan_speed[f];
EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
};
#endif
#if HAS_FAN0
editable.uint8 = thermalManager.fan_speed[0];
EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(0, editable.uint8); });
EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, 1, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
#endif
#endif
#if HAS_FAN1
editable.uint8 = thermalManager.fan_speed[1];
EDIT_ITEM_FAST_N(percent, 2, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, 2, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[1], 3, 255);
#endif
#elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 1
editable.uint8 = thermalManager.fan_speed[1];
EDIT_ITEM_FAST_N(percent, 2, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); });
fan_edit_items(1);
#elif SNFAN(1)
singlenozzle_item(1);
#endif
#if HAS_FAN2
editable.uint8 = thermalManager.fan_speed[2];
EDIT_ITEM_FAST_N(percent, 3, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST_N(percent, 3, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[2], 3, 255);
#endif
#elif ENABLED(SINGLENOZZLE) && EXTRUDERS > 2
editable.uint8 = thermalManager.fan_speed[2];
EDIT_ITEM_FAST_N(percent, 3, MSG_STORED_FAN_N, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); });
fan_edit_items(2);
#elif SNFAN(2)
singlenozzle_item(1);
#endif
#if HAS_FAN3
fan_edit_items(3);
#elif SNFAN(3)
singlenozzle_item(1);
#endif
#if HAS_FAN4
fan_edit_items(4);
#elif SNFAN(4)
singlenozzle_item(1);
#endif
#if HAS_FAN5
fan_edit_items(5);
#elif SNFAN(5)
singlenozzle_item(1);
#endif
#if HAS_FAN6
fan_edit_items(6);
#elif SNFAN(6)
singlenozzle_item(1);
#endif
#if HAS_FAN7
fan_edit_items(7);
#elif SNFAN(7)
singlenozzle_item(1);
#endif
#endif // FAN_COUNT > 0
//

4
Marlin/src/libs/L64XX/L64XX_Marlin.cpp
View File

@ -39,7 +39,7 @@ L64XX_Marlin L64xxManager;
void echo_yes_no(const bool yes) { serialprintPGM(yes ? PSTR(" YES") : PSTR(" NO ")); }
char L64XX_Marlin::index_to_axis[MAX_L64XX][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "Z4", "E0", "E1", "E2", "E3", "E4", "E5" };
char L64XX_Marlin::index_to_axis[MAX_L64XX][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "Z4", "E0", "E1", "E2", "E3", "E4", "E5", "E6", "E7" };
#define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../core/debug_out.h"
@ -69,6 +69,8 @@ uint8_t L64XX_Marlin::index_to_dir[MAX_L64XX] = { (INVERT_X_DIR),
(INVERT_E3_DIR), // 11 E3
(INVERT_E4_DIR), // 12 E4
(INVERT_E5_DIR), // 13 E5
(INVERT_E6_DIR), // 14 E6
(INVERT_E7_DIR) // 15 E7
};
volatile uint8_t L64XX_Marlin::spi_abort = false;

2
Marlin/src/libs/L64XX/L64XX_Marlin.h
View File

@ -35,7 +35,7 @@
#define dSPIN_STEP_CLOCK_REV dSPIN_STEP_CLOCK+1
#define HAS_L64XX_EXTRUDER (AXIS_IS_L64XX(E0) || AXIS_IS_L64XX(E1) || AXIS_IS_L64XX(E2) || AXIS_IS_L64XX(E3) || AXIS_IS_L64XX(E4) || AXIS_IS_L64XX(E5))
enum L64XX_axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, MAX_L64XX };
enum L64XX_axis_t : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5, E6, E7, MAX_L64XX };
class L64XX_Marlin : public L64XXHelper {
public:

7
Marlin/src/libs/softspi.h
View File

@ -66,7 +66,7 @@
* @return value read
*/
FORCE_INLINE static bool fastDigitalRead(uint8_t pin) {
return g_APinDescription[pin].pPort->PIO_PDSR & g_APinDescription[pin].ulPin;
return digitalRead(pin);
}
/**
@ -75,10 +75,7 @@
* @param[in] level value to write
*/
FORCE_INLINE static void fastDigitalWrite(uint8_t pin, bool value) {
if (value)
g_APinDescription[pin].pPort->PIO_SODR = g_APinDescription[pin].ulPin;
else
g_APinDescription[pin].pPort->PIO_CODR = g_APinDescription[pin].ulPin;
digitalWrite(pin, value);
}
#endif // !CORE_TEENSY

44
Marlin/src/module/configuration_store.cpp
View File

@ -1008,6 +1008,16 @@ void MarlinSettings::postprocess() {
#if AXIS_IS_TMC(E5)
tmc_stepper_current.E5 = stepperE5.getMilliamps();
#endif
#if MAX_EXTRUDERS > 6
#if AXIS_IS_TMC(E6)
tmc_stepper_current.E6 = stepperE6.getMilliamps();
#endif
#if MAX_EXTRUDERS > 7
#if AXIS_IS_TMC(E7)
tmc_stepper_current.E7 = stepperE7.getMilliamps();
#endif
#endif // MAX_EXTRUDERS > 7
#endif // MAX_EXTRUDERS > 6
#endif // MAX_EXTRUDERS > 5
#endif // MAX_EXTRUDERS > 4
#endif // MAX_EXTRUDERS > 3
@ -1074,6 +1084,16 @@ void MarlinSettings::postprocess() {
#if AXIS_HAS_STEALTHCHOP(E5)
tmc_hybrid_threshold.E5 = stepperE5.get_pwm_thrs();
#endif
#if MAX_EXTRUDERS > 6
#if AXIS_HAS_STEALTHCHOP(E6)
tmc_hybrid_threshold.E6 = stepperE6.get_pwm_thrs();
#endif
#if MAX_EXTRUDERS > 7
#if AXIS_HAS_STEALTHCHOP(E7)
tmc_hybrid_threshold.E7 = stepperE7.get_pwm_thrs();
#endif
#endif // MAX_EXTRUDERS > 7
#endif // MAX_EXTRUDERS > 6
#endif // MAX_EXTRUDERS > 5
#endif // MAX_EXTRUDERS > 4
#endif // MAX_EXTRUDERS > 3
@ -1170,6 +1190,16 @@ void MarlinSettings::postprocess() {
#if AXIS_HAS_STEALTHCHOP(E5)
tmc_stealth_enabled.E5 = stepperE5.get_stealthChop_status();
#endif
#if MAX_EXTRUDERS > 6
#if AXIS_HAS_STEALTHCHOP(E6)
tmc_stealth_enabled.E6 = stepperE6.get_stealthChop_status();
#endif
#if MAX_EXTRUDERS > 7
#if AXIS_HAS_STEALTHCHOP(E7)
tmc_stealth_enabled.E7 = stepperE7.get_stealthChop_status();
#endif
#endif // MAX_EXTRUDERS > 7
#endif // MAX_EXTRUDERS > 6
#endif // MAX_EXTRUDERS > 5
#endif // MAX_EXTRUDERS > 4
#endif // MAX_EXTRUDERS > 3
@ -2788,6 +2818,14 @@ void MarlinSettings::reset() {
#if EXTRUDERS > 5
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
#if EXTRUDERS > 6
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M200 T6 D", LINEAR_UNIT(planner.filament_size[6]));
#if EXTRUDERS > 7
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M200 T7 D", LINEAR_UNIT(planner.filament_size[7]));
#endif // EXTRUDERS > 7
#endif // EXTRUDERS > 6
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
@ -3528,6 +3566,12 @@ void MarlinSettings::reset() {
_ECHO_603(4);
#if EXTRUDERS > 5
_ECHO_603(5);
#if EXTRUDERS > 6
_ECHO_603(6);
#if EXTRUDERS > 7
_ECHO_603(7);
#endif // EXTRUDERS > 7
#endif // EXTRUDERS > 6
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3

14
Marlin/src/module/endstops.cpp
View File

@ -486,14 +486,20 @@ void _O2 Endstops::report_states() {
default: continue;
case 1: pin = FIL_RUNOUT_PIN; break;
case 2: pin = FIL_RUNOUT2_PIN; break;
#if NUM_RUNOUT_SENSORS > 2
#if NUM_RUNOUT_SENSORS >= 3
case 3: pin = FIL_RUNOUT3_PIN; break;
#if NUM_RUNOUT_SENSORS > 3
#if NUM_RUNOUT_SENSORS >= 4
case 4: pin = FIL_RUNOUT4_PIN; break;
#if NUM_RUNOUT_SENSORS > 4
#if NUM_RUNOUT_SENSORS >= 5
case 5: pin = FIL_RUNOUT5_PIN; break;
#if NUM_RUNOUT_SENSORS > 5
#if NUM_RUNOUT_SENSORS >= 6
case 6: pin = FIL_RUNOUT6_PIN; break;
#if NUM_RUNOUT_SENSORS >= 7
case 7: pin = FIL_RUNOUT7_PIN; break;
#if NUM_RUNOUT_SENSORS >= 8
case 8: pin = FIL_RUNOUT8_PIN; break;
#endif
#endif
#endif
#endif
#endif

16
Marlin/src/module/planner.cpp
View File

@ -1308,7 +1308,21 @@ void Planner::check_axes_activity() {
#if HAS_FAN2
FAN_SET(2);
#endif
#if HAS_FAN3
FAN_SET(3);
#endif
#if HAS_FAN4
FAN_SET(4);
#endif
#if HAS_FAN5
FAN_SET(5);
#endif
#if HAS_FAN6
FAN_SET(6);
#endif
#if HAS_FAN7
FAN_SET(7);
#endif
#endif // FAN_COUNT > 0
#if ENABLED(AUTOTEMP)

104
Marlin/src/module/stepper.cpp
View File

@ -2140,6 +2140,12 @@ void Stepper::init() {
#if HAS_E5_DIR
E5_DIR_INIT();
#endif
#if HAS_E6_DIR
E6_DIR_INIT();
#endif
#if HAS_E7_DIR
E7_DIR_INIT();
#endif
// Init Enable Pins - steppers default to disabled.
#if HAS_X_ENABLE
@ -2198,6 +2204,14 @@ void Stepper::init() {
E5_ENABLE_INIT();
if (!E_ENABLE_ON) E5_ENABLE_WRITE(HIGH);
#endif
#if HAS_E6_ENABLE
E6_ENABLE_INIT();
if (!E_ENABLE_ON) E6_ENABLE_WRITE(HIGH);
#endif
#if HAS_E7_ENABLE
E7_ENABLE_INIT();
if (!E_ENABLE_ON) E7_ENABLE_WRITE(HIGH);
#endif
#define _STEP_INIT(AXIS) AXIS ##_STEP_INIT()
#define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW)
@ -2261,6 +2275,12 @@ void Stepper::init() {
#if E_STEPPERS > 5 && HAS_E5_STEP
E_AXIS_INIT(5);
#endif
#if E_STEPPERS > 6 && HAS_E6_STEP
E_AXIS_INIT(6);
#endif
#if E_STEPPERS > 7 && HAS_E7_STEP
E_AXIS_INIT(7);
#endif
#if DISABLED(I2S_STEPPER_STREAM)
HAL_timer_start(STEP_TIMER_NUM, 122); // Init Stepper ISR to 122 Hz for quick starting
@ -2802,6 +2822,20 @@ void Stepper::report_positions() {
SET_OUTPUT(E5_MS3_PIN);
#endif
#endif
#if HAS_E6_MICROSTEPS
SET_OUTPUT(E6_MS1_PIN);
SET_OUTPUT(E6_MS2_PIN);
#if PIN_EXISTS(E6_MS3)
SET_OUTPUT(E6_MS3_PIN);
#endif
#endif
#if HAS_E7_MICROSTEPS
SET_OUTPUT(E7_MS1_PIN);
SET_OUTPUT(E7_MS2_PIN);
#if PIN_EXISTS(E7_MS3)
SET_OUTPUT(E7_MS3_PIN);
#endif
#endif
static const uint8_t microstep_modes[] = MICROSTEP_MODES;
for (uint16_t i = 0; i < COUNT(microstep_modes); i++)
@ -2847,22 +2881,28 @@ void Stepper::report_positions() {
break;
#endif
#if HAS_E0_MICROSTEPS
case 3: WRITE(E0_MS1_PIN, ms1); break;
case 3: WRITE(E0_MS1_PIN, ms1); break;
#endif
#if HAS_E1_MICROSTEPS
case 4: WRITE(E1_MS1_PIN, ms1); break;
case 4: WRITE(E1_MS1_PIN, ms1); break;
#endif
#if HAS_E2_MICROSTEPS
case 5: WRITE(E2_MS1_PIN, ms1); break;
case 5: WRITE(E2_MS1_PIN, ms1); break;
#endif
#if HAS_E3_MICROSTEPS
case 6: WRITE(E3_MS1_PIN, ms1); break;
case 6: WRITE(E3_MS1_PIN, ms1); break;
#endif
#if HAS_E4_MICROSTEPS
case 7: WRITE(E4_MS1_PIN, ms1); break;
case 7: WRITE(E4_MS1_PIN, ms1); break;
#endif
#if HAS_E5_MICROSTEPS
case 8: WRITE(E5_MS1_PIN, ms1); break;
case 8: WRITE(E5_MS1_PIN, ms1); break;
#endif
#if HAS_E6_MICROSTEPS
case 9: WRITE(E6_MS1_PIN, ms1); break;
#endif
#if HAS_E7_MICROSTEPS
case 10: WRITE(E7_MS1_PIN, ms1); break;
#endif
}
if (ms2 >= 0) switch (driver) {
@ -2903,22 +2943,28 @@ void Stepper::report_positions() {
break;
#endif
#if HAS_E0_MICROSTEPS
case 3: WRITE(E0_MS2_PIN, ms2); break;
case 3: WRITE(E0_MS2_PIN, ms2); break;
#endif
#if HAS_E1_MICROSTEPS
case 4: WRITE(E1_MS2_PIN, ms2); break;
case 4: WRITE(E1_MS2_PIN, ms2); break;
#endif
#if HAS_E2_MICROSTEPS
case 5: WRITE(E2_MS2_PIN, ms2); break;
case 5: WRITE(E2_MS2_PIN, ms2); break;
#endif
#if HAS_E3_MICROSTEPS
case 6: WRITE(E3_MS2_PIN, ms2); break;
case 6: WRITE(E3_MS2_PIN, ms2); break;
#endif
#if HAS_E4_MICROSTEPS
case 7: WRITE(E4_MS2_PIN, ms2); break;
case 7: WRITE(E4_MS2_PIN, ms2); break;
#endif
#if HAS_E5_MICROSTEPS
case 8: WRITE(E5_MS2_PIN, ms2); break;
case 8: WRITE(E5_MS2_PIN, ms2); break;
#endif
#if HAS_E6_MICROSTEPS
case 9: WRITE(E6_MS2_PIN, ms2); break;
#endif
#if HAS_E7_MICROSTEPS
case 10: WRITE(E7_MS2_PIN, ms2); break;
#endif
}
if (ms3 >= 0) switch (driver) {
@ -2959,22 +3005,28 @@ void Stepper::report_positions() {
break;
#endif
#if HAS_E0_MICROSTEPS && PIN_EXISTS(E0_MS3)
case 3: WRITE(E0_MS3_PIN, ms3); break;
case 3: WRITE(E0_MS3_PIN, ms3); break;
#endif
#if HAS_E1_MICROSTEPS && PIN_EXISTS(E1_MS3)
case 4: WRITE(E1_MS3_PIN, ms3); break;
case 4: WRITE(E1_MS3_PIN, ms3); break;
#endif
#if HAS_E2_MICROSTEPS && PIN_EXISTS(E2_MS3)
case 5: WRITE(E2_MS3_PIN, ms3); break;
case 5: WRITE(E2_MS3_PIN, ms3); break;
#endif
#if HAS_E3_MICROSTEPS && PIN_EXISTS(E3_MS3)
case 6: WRITE(E3_MS3_PIN, ms3); break;
case 6: WRITE(E3_MS3_PIN, ms3); break;
#endif
#if HAS_E4_MICROSTEPS && PIN_EXISTS(E4_MS3)
case 7: WRITE(E4_MS3_PIN, ms3); break;
case 7: WRITE(E4_MS3_PIN, ms3); break;
#endif
#if HAS_E5_MICROSTEPS && PIN_EXISTS(E5_MS3)
case 8: WRITE(E5_MS3_PIN, ms3); break;
case 8: WRITE(E5_MS3_PIN, ms3); break;
#endif
#if HAS_E6_MICROSTEPS && PIN_EXISTS(E6_MS3)
case 9: WRITE(E6_MS3_PIN, ms3); break;
#endif
#if HAS_E7_MICROSTEPS && PIN_EXISTS(E7_MS3)
case 10: WRITE(E7_MS3_PIN, ms3); break;
#endif
}
}
@ -3084,6 +3136,22 @@ void Stepper::report_positions() {
#endif
);
#endif
#if HAS_E6_MICROSTEPS
SERIAL_ECHOPGM("E6: ");
SERIAL_CHAR('0' + READ(E6_MS1_PIN), '0' + READ(E6_MS2_PIN)
#if PIN_EXISTS(E6_MS3)
, '0' + READ(E6_MS3_PIN)
#endif
);
#endif
#if HAS_E7_MICROSTEPS
SERIAL_ECHOPGM("E7: ");
SERIAL_CHAR('0' + READ(E7_MS1_PIN), '0' + READ(E7_MS2_PIN)
#if PIN_EXISTS(E7_MS3)
, '0' + READ(E7_MS3_PIN)
#endif
);
#endif
}
#endif // HAS_MICROSTEPS

34
Marlin/src/module/stepper/L64xx.h
View File

@ -278,3 +278,37 @@
#define E5_DIR_READ() (stepper##E5.getStatus() & STATUS_DIR);
#endif
#endif
// E6 Stepper
#if AXIS_IS_L64XX(E6)
extern L64XX_CLASS(E6) stepperE6;
#define E6_ENABLE_INIT() NOOP
#define E6_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE6.free())
#define E6_ENABLE_READ() (stepperE6.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E6(L6474)
#define E6_DIR_INIT() SET_OUTPUT(E6_DIR_PIN)
#define E6_DIR_WRITE(STATE) L6474_DIR_WRITE(E6, STATE)
#define E6_DIR_READ() READ(E6_DIR_PIN)
#else
#define E6_DIR_INIT() NOOP
#define E6_DIR_WRITE(STATE) L64XX_DIR_WRITE(E6, STATE)
#define E6_DIR_READ() (stepper##E6.getStatus() & STATUS_DIR);
#endif
#endif
// E7 Stepper
#if AXIS_IS_L64XX(E7)
extern L64XX_CLASS(E7) stepperE7;
#define E7_ENABLE_INIT() NOOP
#define E7_ENABLE_WRITE(STATE) (STATE ? NOOP : stepperE7.free())
#define E7_ENABLE_READ() (stepperE7.getStatus() & STATUS_HIZ)
#if AXIS_DRIVER_TYPE_E7(L6474)
#define E7_DIR_INIT() SET_OUTPUT(E7_DIR_PIN)
#define E7_DIR_WRITE(STATE) L6474_DIR_WRITE(E7, STATE)
#define E7_DIR_READ() READ(E7_DIR_PIN)
#else
#define E7_DIR_INIT() NOOP
#define E7_DIR_WRITE(STATE) L64XX_DIR_WRITE(E7, STATE)
#define E7_DIR_READ() (stepper##E7.getStatus() & STATUS_DIR);
#endif
#endif

16
Marlin/src/module/stepper/TMC26X.h
View File

@ -150,3 +150,19 @@ void tmc26x_init_to_defaults();
#define E5_ENABLE_WRITE(STATE) stepperE5.setEnabled(STATE)
#define E5_ENABLE_READ() stepperE5.isEnabled()
#endif
// E6 Stepper
#if AXIS_DRIVER_TYPE_E6(TMC26X)
extern TMC26XStepper stepperE6;
#define E6_ENABLE_INIT() NOOP
#define E6_ENABLE_WRITE(STATE) stepperE6.setEnabled(STATE)
#define E6_ENABLE_READ() stepperE6.isEnabled()
#endif
// E7 Stepper
#if AXIS_DRIVER_TYPE_E7(TMC26X)
extern TMC26XStepper stepperE7;
#define E7_ENABLE_INIT() NOOP
#define E7_ENABLE_WRITE(STATE) stepperE7.setEnabled(STATE)
#define E7_ENABLE_READ() stepperE7.isEnabled()
#endif

266
Marlin/src/module/stepper/indirection.h
View File

@ -303,26 +303,115 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E5_STEP_READ() bool(READ(E5_STEP_PIN))
// E6 Stepper
#ifndef E6_ENABLE_INIT
#define E6_ENABLE_INIT() SET_OUTPUT(E6_ENABLE_PIN)
#define E6_ENABLE_WRITE(STATE) WRITE(E6_ENABLE_PIN,STATE)
#define E6_ENABLE_READ() bool(READ(E6_ENABLE_PIN))
#endif
#ifndef E6_DIR_INIT
#define E6_DIR_INIT() SET_OUTPUT(E6_DIR_PIN)
#define E6_DIR_WRITE(STATE) WRITE(E6_DIR_PIN,STATE)
#define E6_DIR_READ() bool(READ(E6_DIR_PIN))
#endif
#define E6_STEP_INIT() SET_OUTPUT(E6_STEP_PIN)
#ifndef E6_STEP_WRITE
#define E6_STEP_WRITE(STATE) WRITE(E6_STEP_PIN,STATE)
#endif
#define E6_STEP_READ() bool(READ(E6_STEP_PIN))
// E7 Stepper
#ifndef E7_ENABLE_INIT
#define E7_ENABLE_INIT() SET_OUTPUT(E7_ENABLE_PIN)
#define E7_ENABLE_WRITE(STATE) WRITE(E7_ENABLE_PIN,STATE)
#define E7_ENABLE_READ() bool(READ(E7_ENABLE_PIN))
#endif
#ifndef E7_DIR_INIT
#define E7_DIR_INIT() SET_OUTPUT(E7_DIR_PIN)
#define E7_DIR_WRITE(STATE) WRITE(E7_DIR_PIN,STATE)
#define E7_DIR_READ() bool(READ(E7_DIR_PIN))
#endif
#define E7_STEP_INIT() SET_OUTPUT(E7_STEP_PIN)
#ifndef E7_STEP_WRITE
#define E7_STEP_WRITE(STATE) WRITE(E7_STEP_PIN,STATE)
#endif
#define E7_STEP_READ() bool(READ(E7_STEP_PIN))
/**
* Extruder indirection for the single E axis
*/
#if ENABLED(SWITCHING_EXTRUDER) // One stepper driver per two extruders, reversed on odd index
#if EXTRUDERS > 5
#if EXTRUDERS > 7
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else if (E < 6) { E2_STEP_WRITE(V); } else { E3_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 5: E2_DIR_WRITE( INVERT_E2_DIR); break; \
case 6: E3_DIR_WRITE( INVERT_E3_DIR); break; case 7: E3_DIR_WRITE( INVERT_E3_DIR); break; \
} }while(0)
#define REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; case 5: E2_DIR_WRITE(!INVERT_E2_DIR); break; \
case 6: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 7: E3_DIR_WRITE(!INVERT_E3_DIR); break; \
} }while(0)
#elif EXTRUDERS > 6
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else if (E < 6) { E2_STEP_WRITE(V); } else { E3_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 5: E2_DIR_WRITE( INVERT_E2_DIR); break; \
case 6: E3_DIR_WRITE( INVERT_E3_DIR); break; \
} }while(0)
#define REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; case 5: E2_DIR_WRITE(!INVERT_E2_DIR); break; \
case 6: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
#elif EXTRUDERS > 5
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); case 5: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); case 5: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 5: E2_DIR_WRITE( INVERT_E2_DIR); break; \
} }while(0)
#define REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; case 5: E2_DIR_WRITE(!INVERT_E2_DIR); break; \
} }while(0)
#elif EXTRUDERS > 4
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE(!INVERT_E2_DIR); break; \
} }while(0)
#define REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 4: E2_DIR_WRITE( INVERT_E2_DIR); break; \
} }while(0)
#elif EXTRUDERS > 3
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; \
} }while(0)
#define REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
} }while(0)
#elif EXTRUDERS > 2
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
} }while(0)
#define REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; \
case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; \
} }while(0)
#else
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(E ? INVERT_E0_DIR : !INVERT_E0_DIR); }while(0)
@ -340,23 +429,100 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#elif E_STEPPERS > 1
#if E_STEPPERS > 5
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); case 5: E5_STEP_WRITE(V); } }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); case 5: E5_DIR_WRITE(!INVERT_E5_DIR); } }while(0)
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); case 5: E5_DIR_WRITE( INVERT_E5_DIR); } }while(0)
#if E_STEPPERS > 7
#define _E_STEP_WRITE(E,V) do{ switch (E) { \
case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \
case 4: E4_STEP_WRITE(V); break; case 5: E5_STEP_WRITE(V); break; case 6: E6_STEP_WRITE(V); break; case 7: E7_STEP_WRITE(V); break; \
} }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; case 5: E5_DIR_WRITE(!INVERT_E5_DIR); break; \
case 6: E6_DIR_WRITE(!INVERT_E6_DIR); break; case 7: E7_DIR_WRITE(!INVERT_E7_DIR); break; \
} }while(0)
#define _REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; case 5: E5_DIR_WRITE( INVERT_E5_DIR); break; \
case 6: E6_DIR_WRITE( INVERT_E6_DIR); break; case 7: E7_DIR_WRITE( INVERT_E7_DIR); break; \
} }while(0)
#elif E_STEPPERS > 6
#define _E_STEP_WRITE(E,V) do{ switch (E) { \
case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \
case 4: E4_STEP_WRITE(V); break; case 5: E5_STEP_WRITE(V); break; case 6: E6_STEP_WRITE(V); break; \
} }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; case 5: E5_DIR_WRITE(!INVERT_E5_DIR); break; \
case 6: E6_DIR_WRITE(!INVERT_E6_DIR); break; \
} }while(0)
#define _REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; case 5: E5_DIR_WRITE( INVERT_E5_DIR); break; \
case 6: E6_DIR_WRITE( INVERT_E6_DIR); break; \
} }while(0)
#elif E_STEPPERS > 5
#define _E_STEP_WRITE(E,V) do{ switch (E) { \
case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \
case 4: E4_STEP_WRITE(V); break; case 5: E5_STEP_WRITE(V); break; \
} }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; case 5: E5_DIR_WRITE(!INVERT_E5_DIR); break; \
} }while(0)
#define _REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; case 5: E5_DIR_WRITE( INVERT_E5_DIR); break; \
} }while(0)
#elif E_STEPPERS > 4
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
#define _E_STEP_WRITE(E,V) do{ switch (E) { \
case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \
case 4: E4_STEP_WRITE(V); break; \
} }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE(!INVERT_E4_DIR); break; \
} }while(0)
#define _REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \
case 4: E4_DIR_WRITE( INVERT_E4_DIR); break; \
} }while(0)
#elif E_STEPPERS > 3
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
#define _E_STEP_WRITE(E,V) do{ switch (E) { \
case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; \
} }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; \
} }while(0)
#define _REV_E_DIR(E) do{ switch (E) { \
case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; \
case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; \
} }while(0)
#elif E_STEPPERS > 2
#define _E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
#define _NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define _REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#else
#define _E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define _NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define _REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
@ -376,7 +542,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { DUPE(STEP,V); } else _E_STEP_WRITE(E,V); }while(0)
#if E_STEPPERS > 2
#if E_STEPPERS > 5
#if E_STEPPERS > 7
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); _DUPE(6,T,V); _DUPE(7,T,V); }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); NDIR(6); NDIR(7); } else _NORM_E_DIR(E); }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); RDIR(6); RDIR(7); } else _REV_E_DIR(E); }while(0)
#elif E_STEPPERS > 6
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); _DUPE(6,T,V); }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); NDIR(6); } else _NORM_E_DIR(E); }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); RDIR(6); } else _REV_E_DIR(E); }while(0)
#elif E_STEPPERS > 5
#define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); _DUPE(2,T,V); _DUPE(3,T,V); _DUPE(4,T,V); _DUPE(5,T,V); }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); NDIR(2); NDIR(3); NDIR(4); NDIR(5); } else _NORM_E_DIR(E); }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); RDIR(3); RDIR(4); RDIR(5); } else _REV_E_DIR(E); }while(0)
@ -604,12 +778,42 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E5_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E6(L6470)
extern L6470 stepperE6;
#define E6_enable() NOOP
#define E6_disable() do{ stepperE6.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 6 && HAS_E6_ENABLE
#define E6_enable() E6_ENABLE_WRITE( E_ENABLE_ON)
#define E6_disable() E6_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E6_enable() NOOP
#define E6_disable() NOOP
#endif
#if AXIS_DRIVER_TYPE_E7(L6470)
extern L6470 stepperE7;
#define E7_enable() NOOP
#define E7_disable() do{ stepperE7.free(); CBI(axis_known_position, E_AXIS); }while(0)
#elif E_STEPPERS > 7 && HAS_E7_ENABLE
#define E7_enable() E7_ENABLE_WRITE( E_ENABLE_ON)
#define E7_disable() E7_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define E7_enable() NOOP
#define E7_disable() NOOP
#endif
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
*/
#if MIXING_STEPPERS > 5
#if MIXING_STEPPERS > 7
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); E6_enable(); E7_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); E6_disable(); E7_disable(); }
#elif MIXING_STEPPERS > 6
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); E6_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); E6_disable(); }
#elif MIXING_STEPPERS > 5
#define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); }
#define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); }
#elif MIXING_STEPPERS > 4
@ -635,6 +839,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define disable_E4() NOOP
#define enable_E5() NOOP
#define disable_E5() NOOP
#define enable_E6() NOOP
#define disable_E6() NOOP
#define enable_E7() NOOP
#define disable_E7() NOOP
#else // !MIXING_EXTRUDER
@ -686,4 +894,20 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define disable_E5() NOOP
#endif
#if E_STEPPERS > 6 && HAS_E6_ENABLE
#define enable_E6() E6_enable()
#define disable_E6() E6_disable()
#else
#define enable_E6() NOOP
#define disable_E6() NOOP
#endif
#if E_STEPPERS > 7 && HAS_E7_ENABLE
#define enable_E7() E7_enable()
#define disable_E7() E7_disable()
#else
#define enable_E7() NOOP
#define disable_E7() NOOP
#endif
#endif // !MIXING_EXTRUDER

40
Marlin/src/module/stepper/trinamic.cpp
View File

@ -301,6 +301,20 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E };
TMC_UART_DEFINE_E(SW, 5);
#endif
#endif
#if AXIS_HAS_UART(E6)
#ifdef E6_HARDWARE_SERIAL
TMC_UART_DEFINE_E(HW, 6);
#else
TMC_UART_DEFINE_E(SW, 6);
#endif
#endif
#if AXIS_HAS_UART(E7)
#ifdef E7_HARDWARE_SERIAL
TMC_UART_DEFINE_E(HW, 7);
#else
TMC_UART_DEFINE_E(SW, 7);
#endif
#endif
void tmc_serial_begin() {
#if AXIS_HAS_UART(X)
@ -401,6 +415,20 @@ enum StealthIndex : uint8_t { STEALTH_AXIS_XY, STEALTH_AXIS_Z, STEALTH_AXIS_E };
stepperE5.beginSerial(TMC_BAUD_RATE);
#endif
#endif
#if AXIS_HAS_UART(E6)
#ifdef E6_HARDWARE_SERIAL
E6_HARDWARE_SERIAL.begin(TMC_BAUD_RATE);
#else
stepperE6.beginSerial(TMC_BAUD_RATE);
#endif
#endif
#if AXIS_HAS_UART(E7)
#ifdef E7_HARDWARE_SERIAL
E7_HARDWARE_SERIAL.begin(TMC_BAUD_RATE);
#else
stepperE7.beginSerial(TMC_BAUD_RATE);
#endif
#endif
}
#endif
@ -654,6 +682,12 @@ void restore_trinamic_drivers() {
#if AXIS_IS_TMC(E5)
stepperE5.push();
#endif
#if AXIS_IS_TMC(E6)
stepperE6.push();
#endif
#if AXIS_IS_TMC(E7)
stepperE7.push();
#endif
}
void reset_trinamic_drivers() {
@ -719,6 +753,12 @@ void reset_trinamic_drivers() {
#if AXIS_IS_TMC(E5)
_TMC_INIT(E5, STEALTH_AXIS_E);
#endif
#if AXIS_IS_TMC(E6)
_TMC_INIT(E6, STEALTH_AXIS_E);
#endif
#if AXIS_IS_TMC(E7)
_TMC_INIT(E7, STEALTH_AXIS_E);
#endif
#if USE_SENSORLESS
#if X_SENSORLESS

28
Marlin/src/module/stepper/trinamic.h
View File

@ -58,6 +58,8 @@
#define TMC_E3_LABEL 'E', '3'
#define TMC_E4_LABEL 'E', '4'
#define TMC_E5_LABEL 'E', '5'
#define TMC_E6_LABEL 'E', '6'
#define TMC_E7_LABEL 'E', '7'
#define __TMC_CLASS(TYPE, L, I, A) TMCMarlin<CLASS_##TYPE, L, I, A>
#define _TMC_CLASS(TYPE, LandI, A) __TMC_CLASS(TYPE, LandI, A)
@ -266,3 +268,29 @@ void reset_trinamic_drivers();
#define E5_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E5_STEP_PIN); }while(0)
#endif
#endif
// E6 Stepper
#if AXIS_IS_TMC(E6)
extern TMC_CLASS_E(6) stepperE6;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6)
#define E6_ENABLE_INIT() NOOP
#define E6_ENABLE_WRITE(STATE) stepperE6.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E6_ENABLE_READ() stepperE6.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E6)
#define E6_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E6_STEP_PIN); }while(0)
#endif
#endif
// E7 Stepper
#if AXIS_IS_TMC(E7)
extern TMC_CLASS_E(7) stepperE7;
#if ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7)
#define E7_ENABLE_INIT() NOOP
#define E7_ENABLE_WRITE(STATE) stepperE7.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0)
#define E7_ENABLE_READ() stepperE7.isEnabled()
#endif
#if AXIS_HAS_SQUARE_WAVE(E7)
#define E7_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E7_STEP_PIN); }while(0)
#endif
#endif

182
Marlin/src/module/temperature.cpp
View File

@ -303,9 +303,11 @@ volatile bool Temperature::temp_meas_ready = false;
sensor_heater_2 { HEATER_2_RAW_LO_TEMP, HEATER_2_RAW_HI_TEMP, 0, 16383 },
sensor_heater_3 { HEATER_3_RAW_LO_TEMP, HEATER_3_RAW_HI_TEMP, 0, 16383 },
sensor_heater_4 { HEATER_4_RAW_LO_TEMP, HEATER_4_RAW_HI_TEMP, 0, 16383 },
sensor_heater_5 { HEATER_5_RAW_LO_TEMP, HEATER_5_RAW_HI_TEMP, 0, 16383 };
sensor_heater_5 { HEATER_5_RAW_LO_TEMP, HEATER_5_RAW_HI_TEMP, 0, 16383 },
sensor_heater_6 { HEATER_6_RAW_LO_TEMP, HEATER_6_RAW_HI_TEMP, 0, 16383 },
sensor_heater_7 { HEATER_7_RAW_LO_TEMP, HEATER_7_RAW_HI_TEMP, 0, 16383 };
temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0, sensor_heater_1, sensor_heater_2, sensor_heater_3, sensor_heater_4, sensor_heater_5);
temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0, sensor_heater_1, sensor_heater_2, sensor_heater_3, sensor_heater_4, sensor_heater_5, sensor_heater_6, sensor_heater_7);
#endif
#ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED
@ -686,6 +688,12 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) {
, REPEAT2(4,_EFAN,4) 4
#if HOTENDS > 5
, REPEAT2(5,_EFAN,5) 5
#if HOTENDS > 6
, REPEAT2(6,_EFAN,6) 6
#if HOTENDS > 7
, REPEAT2(7,_EFAN,7) 7
#endif
#endif
#endif
#endif
#endif
@ -751,6 +759,12 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) {
#if HAS_AUTO_FAN_5
case 5: _UPDATE_AUTO_FAN(E5, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
#endif
#if HAS_AUTO_FAN_6
case 6: _UPDATE_AUTO_FAN(E6, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
#endif
#if HAS_AUTO_FAN_7
case 7: _UPDATE_AUTO_FAN(E7, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
#endif
#if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E
case CHAMBER_FAN_INDEX: _UPDATE_AUTO_FAN(CHAMBER, fan_on, CHAMBER_AUTO_FAN_SPEED); break;
#endif
@ -893,7 +907,6 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
pid_output += work_pid[ee].Kc;
}
#endif // PID_EXTRUSION_SCALING
#if ENABLED(PID_FAN_SCALING)
if (thermalManager.fan_speed[active_extruder] > PID_FAN_SCALING_MIN_SPEED) {
work_pid[ee].Kf = PID_PARAM(Kf, ee) + (PID_FAN_SCALING_LIN_FACTOR) * thermalManager.fan_speed[active_extruder];
@ -902,7 +915,6 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
//pid_output -= work_pid[ee].Ki;
//pid_output += work_pid[ee].Ki * work_pid[ee].Kf
#endif // PID_FAN_SCALING
LIMIT(pid_output, 0, PID_MAX);
}
temp_dState[ee] = temp_hotend[ee].celsius;
@ -1286,6 +1298,12 @@ void Temperature::manage_heater() {
#if ENABLED(HEATER_5_USER_THERMISTOR)
{ true, 0, 0, HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS, 0, 0, HOTEND5_BETA, 0 },
#endif
#if ENABLED(HEATER_6_USER_THERMISTOR)
{ true, 0, 0, HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS, 0, 0, HOTEND6_BETA, 0 },
#endif
#if ENABLED(HEATER_7_USER_THERMISTOR)
{ true, 0, 0, HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS, 0, 0, HOTEND7_BETA, 0 },
#endif
#if ENABLED(HEATER_BED_USER_THERMISTOR)
{ true, 0, 0, BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS, 0, 0, BED_BETA, 0 },
#endif
@ -1331,6 +1349,12 @@ void Temperature::manage_heater() {
#if ENABLED(HEATER_5_USER_THERMISTOR)
t_index == CTI_HOTEND_5 ? PSTR("HOTEND 5") :
#endif
#if ENABLED(HEATER_6_USER_THERMISTOR)
t_index == CTI_HOTEND_6 ? PSTR("HOTEND 6") :
#endif
#if ENABLED(HEATER_7_USER_THERMISTOR)
t_index == CTI_HOTEND_7 ? PSTR("HOTEND 7") :
#endif
#if ENABLED(HEATER_BED_USER_THERMISTOR)
t_index == CTI_BED ? PSTR("BED") :
#endif
@ -1476,6 +1500,26 @@ void Temperature::manage_heater() {
#else
break;
#endif
case 6:
#if ENABLED(HEATER_6_USER_THERMISTOR)
return user_thermistor_to_deg_c(CTI_HOTEND_6, raw);
#elif ENABLED(HEATER_6_USES_AD595)
return TEMP_AD595(raw);
#elif ENABLED(HEATER_6_USES_AD8495)
return TEMP_AD8495(raw);
#else
break;
#endif
case 7:
#if ENABLED(HEATER_7_USER_THERMISTOR)
return user_thermistor_to_deg_c(CTI_HOTEND_7, raw);
#elif ENABLED(HEATER_7_USES_AD595)
return TEMP_AD595(raw);
#elif ENABLED(HEATER_7_USES_AD8495)
return TEMP_AD8495(raw);
#else
break;
#endif
default: break;
}
@ -1633,8 +1677,9 @@ void Temperature::init() {
#endif
#if MB(RUMBA)
#define _AD(N) (ANY(HEATER_##N##_USES_AD595, HEATER_##N##_USES_AD8495))
#if _AD(0) || _AD(1) || _AD(2) || _AD(3) || _AD(4) || _AD(5) || _AD(BED) || _AD(CHAMBER)
#define _AD(N) ANY(HEATER_##N##_USES_AD595, HEATER_##N##_USES_AD8495)
#if _AD(0) || _AD(1) || _AD(2) /* RUMBA has 3 E plugs // || _AD(3) || _AD(4) || _AD(5) || _AD(6) || _AD(7) */ \
|| _AD(BED) || _AD(CHAMBER)
// Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
MCUCR = _BV(JTD);
MCUCR = _BV(JTD);
@ -1668,6 +1713,12 @@ void Temperature::init() {
#if HAS_HEATER_5
OUT_WRITE(HEATER_5_PIN, HEATER_5_INVERTING);
#endif
#if HAS_HEATER_6
OUT_WRITE(HEATER_6_PIN, HEATER_6_INVERTING);
#endif
#if HAS_HEATER_7
OUT_WRITE(HEATER_7_PIN, HEATER_7_INVERTING);
#endif
#if HAS_HEATED_BED
#ifdef ALFAWISE_UX0
@ -1690,6 +1741,21 @@ void Temperature::init() {
#if HAS_FAN2
INIT_FAN_PIN(FAN2_PIN);
#endif
#if HAS_FAN3
INIT_FAN_PIN(FAN3_PIN);
#endif
#if HAS_FAN4
INIT_FAN_PIN(FAN4_PIN);
#endif
#if HAS_FAN5
INIT_FAN_PIN(FAN5_PIN);
#endif
#if HAS_FAN6
INIT_FAN_PIN(FAN6_PIN);
#endif
#if HAS_FAN7
INIT_FAN_PIN(FAN7_PIN);
#endif
#if ENABLED(USE_CONTROLLER_FAN)
INIT_FAN_PIN(CONTROLLER_FAN_PIN);
#endif
@ -1731,6 +1797,12 @@ void Temperature::init() {
#if HAS_TEMP_ADC_5
HAL_ANALOG_SELECT(TEMP_5_PIN);
#endif
#if HAS_TEMP_ADC_6
HAL_ANALOG_SELECT(TEMP_6_PIN);
#endif
#if HAS_TEMP_ADC_7
HAL_ANALOG_SELECT(TEMP_7_PIN);
#endif
#if HAS_JOY_ADC_X
HAL_ANALOG_SELECT(JOY_X_PIN);
#endif
@ -1780,6 +1852,12 @@ void Temperature::init() {
#if HAS_AUTO_FAN_5 && !(_EFANOVERLAP(5,0) || _EFANOVERLAP(5,1) || _EFANOVERLAP(5,2) || _EFANOVERLAP(5,3) || _EFANOVERLAP(5,4))
INIT_E_AUTO_FAN_PIN(E5_AUTO_FAN_PIN);
#endif
#if HAS_AUTO_FAN_6 && !(_EFANOVERLAP(6,0) || _EFANOVERLAP(6,1) || _EFANOVERLAP(6,2) || _EFANOVERLAP(6,3) || _EFANOVERLAP(6,4) || _EFANOVERLAP(6,5))
INIT_E_AUTO_FAN_PIN(E6_AUTO_FAN_PIN);
#endif
#if HAS_AUTO_FAN_7 && !(_EFANOVERLAP(7,0) || _EFANOVERLAP(7,1) || _EFANOVERLAP(7,2) || _EFANOVERLAP(7,3) || _EFANOVERLAP(7,4) || _EFANOVERLAP(7,5) || _EFANOVERLAP(7,6))
INIT_E_AUTO_FAN_PIN(E7_AUTO_FAN_PIN);
#endif
#if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E
INIT_CHAMBER_AUTO_FAN_PIN(CHAMBER_AUTO_FAN_PIN);
#endif
@ -1841,6 +1919,22 @@ void Temperature::init() {
#ifdef HEATER_5_MAXTEMP
_TEMP_MAX_E(5);
#endif
#if HOTENDS > 6
#ifdef HEATER_6_MINTEMP
_TEMP_MIN_E(6);
#endif
#ifdef HEATER_6_MAXTEMP
_TEMP_MAX_E(6);
#endif
#if HOTENDS > 7
#ifdef HEATER_7_MINTEMP
_TEMP_MIN_E(7);
#endif
#ifdef HEATER_7_MAXTEMP
_TEMP_MAX_E(7);
#endif
#endif // HOTENDS > 7
#endif // HOTENDS > 6
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
@ -2232,6 +2326,12 @@ void Temperature::set_current_temp_raw() {
temp_hotend[4].update();
#if HAS_TEMP_ADC_5
temp_hotend[5].update();
#if HAS_TEMP_ADC_6
temp_hotend[6].update();
#if HAS_TEMP_ADC_7
temp_hotend[7].update();
#endif // HAS_TEMP_ADC_7
#endif // HAS_TEMP_ADC_6
#endif // HAS_TEMP_ADC_5
#endif // HAS_TEMP_ADC_4
#endif // HAS_TEMP_ADC_3
@ -2508,6 +2608,21 @@ void Temperature::tick() {
#if HAS_FAN2
_FAN_PWM(2);
#endif
#if HAS_FAN3
_FAN_PWM(3);
#endif
#if HAS_FAN4
_FAN_PWM(4);
#endif
#if HAS_FAN5
_FAN_PWM(5);
#endif
#if HAS_FAN6
_FAN_PWM(6);
#endif
#if HAS_FAN7
_FAN_PWM(7);
#endif
#endif
}
else {
@ -2535,6 +2650,21 @@ void Temperature::tick() {
#if HAS_FAN2
if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN(2, LOW);
#endif
#if HAS_FAN3
if (soft_pwm_count_fan[3] <= pwm_count_tmp) WRITE_FAN(3, LOW);
#endif
#if HAS_FAN4
if (soft_pwm_count_fan[4] <= pwm_count_tmp) WRITE_FAN(4, LOW);
#endif
#if HAS_FAN5
if (soft_pwm_count_fan[5] <= pwm_count_tmp) WRITE_FAN(5, LOW);
#endif
#if HAS_FAN6
if (soft_pwm_count_fan[6] <= pwm_count_tmp) WRITE_FAN(6, LOW);
#endif
#if HAS_FAN7
if (soft_pwm_count_fan[7] <= pwm_count_tmp) WRITE_FAN(7, LOW);
#endif
#endif
}
@ -2599,6 +2729,21 @@ void Temperature::tick() {
#if HAS_FAN2
_PWM_FAN(2);
#endif
#if HAS_FAN3
_FAN_PWM(3);
#endif
#if HAS_FAN4
_FAN_PWM(4);
#endif
#if HAS_FAN5
_FAN_PWM(5);
#endif
#if HAS_FAN6
_FAN_PWM(6);
#endif
#if HAS_FAN7
_FAN_PWM(7);
#endif
}
#if HAS_FAN0
if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0, LOW);
@ -2609,6 +2754,21 @@ void Temperature::tick() {
#if HAS_FAN2
if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN(2, LOW);
#endif
#if HAS_FAN3
if (soft_pwm_count_fan[3] <= pwm_count_tmp) WRITE_FAN(3, LOW);
#endif
#if HAS_FAN4
if (soft_pwm_count_fan[4] <= pwm_count_tmp) WRITE_FAN(4, LOW);
#endif
#if HAS_FAN5
if (soft_pwm_count_fan[5] <= pwm_count_tmp) WRITE_FAN(5, LOW);
#endif
#if HAS_FAN6
if (soft_pwm_count_fan[6] <= pwm_count_tmp) WRITE_FAN(6, LOW);
#endif
#if HAS_FAN7
if (soft_pwm_count_fan[7] <= pwm_count_tmp) WRITE_FAN(7, LOW);
#endif
#endif // FAN_SOFT_PWM
// SOFT_PWM_SCALE to frequency:
@ -2730,6 +2890,16 @@ void Temperature::tick() {
case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break;
#endif
#if HAS_TEMP_ADC_6
case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break;
case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break;
#endif
#if HAS_TEMP_ADC_7
case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break;
case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break;
case Measure_FILWIDTH:

6
Marlin/src/module/temperature.h
View File

@ -132,6 +132,12 @@ enum ADCSensorState : char {
#if HAS_TEMP_ADC_5
PrepareTemp_5, MeasureTemp_5,
#endif
#if HAS_TEMP_ADC_6
PrepareTemp_6, MeasureTemp_6,
#endif
#if HAS_TEMP_ADC_7
PrepareTemp_7, MeasureTemp_7,
#endif
#if HAS_JOY_ADC_X
PrepareJoy_X, MeasureJoy_X,
#endif

41
Marlin/src/module/thermistor/thermistors.h
View File

@ -39,7 +39,7 @@
#define OV(N) int16_t((N) * (OVERSAMPLENR) * (THERMISTOR_TABLE_SCALE))
#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n)
#define ANY_THERMISTOR_IS(n) (THERMISTOR_HEATER_0 == n || THERMISTOR_HEATER_1 == n || THERMISTOR_HEATER_2 == n || THERMISTOR_HEATER_3 == n || THERMISTOR_HEATER_4 == n || THERMISTOR_HEATER_5 == n || THERMISTOR_HEATER_6 == n || THERMISTOR_HEATER_7 == n || THERMISTORBED == n || THERMISTORCHAMBER == n || THERMISTORPROBE == n)
// Pt1000 and Pt100 handling
//
@ -235,6 +235,26 @@
#define HEATER_5_TEMPTABLE_LEN 0
#endif
#if THERMISTOR_HEATER_6
#define HEATER_6_TEMPTABLE TT_NAME(THERMISTOR_HEATER_6)
#define HEATER_6_TEMPTABLE_LEN COUNT(HEATER_6_TEMPTABLE)
#elif defined(HEATER_6_USES_THERMISTOR)
#error "No heater 6 thermistor table specified"
#else
#define HEATER_6_TEMPTABLE nullptr
#define HEATER_6_TEMPTABLE_LEN 0
#endif
#if THERMISTOR_HEATER_7
#define HEATER_7_TEMPTABLE TT_NAME(THERMISTOR_HEATER_7)
#define HEATER_7_TEMPTABLE_LEN COUNT(HEATER_7_TEMPTABLE)
#elif defined(HEATER_7_USES_THERMISTOR)
#error "No heater 7 thermistor table specified"
#else
#define HEATER_7_TEMPTABLE nullptr
#define HEATER_7_TEMPTABLE_LEN 0
#endif
#ifdef THERMISTORBED
#define BED_TEMPTABLE TT_NAME(THERMISTORBED)
#define BED_TEMPTABLE_LEN COUNT(BED_TEMPTABLE)
@ -264,6 +284,7 @@ static_assert(
HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256
&& HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256
&& HEATER_4_TEMPTABLE_LEN < 256 && HEATER_5_TEMPTABLE_LEN < 256
&& HEATER_6_TEMPTABLE_LEN < 258 && HEATER_7_TEMPTABLE_LEN < 258
&& BED_TEMPTABLE_LEN < 256 && CHAMBER_TEMPTABLE_LEN < 256
&& PROBE_TEMPTABLE_LEN < 256,
"Temperature conversion tables over 255 entries need special consideration."
@ -326,6 +347,24 @@ static_assert(
#define HEATER_5_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
#endif
#endif
#ifndef HEATER_6_RAW_HI_TEMP
#if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_6_USES_THERMISTOR)
#define HEATER_6_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
#define HEATER_6_RAW_LO_TEMP 0
#else
#define HEATER_6_RAW_HI_TEMP 0
#define HEATER_6_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
#endif
#endif
#ifndef HEATER_7_RAW_HI_TEMP
#if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_7_USES_THERMISTOR)
#define HEATER_7_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE
#define HEATER_7_RAW_LO_TEMP 0
#else
#define HEATER_7_RAW_HI_TEMP 0
#define HEATER_7_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE
#endif
#endif
#ifndef HEATER_BED_RAW_HI_TEMP
#if defined(REVERSE_TEMP_SENSOR_RANGE) || !defined(HEATER_BED_USES_THERMISTOR)
#define HEATER_BED_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE

70
Marlin/src/pins/pins.h
View File

@ -534,6 +534,8 @@
#include "stm32/pins_STEVAL_3DP001V1.h" // STM32F4 env:STM32F401VE_STEVAL
#elif MB(BIGTREE_SKR_PRO_V1_1)
#include "stm32/pins_BTT_SKR_PRO_V1_1.h" // STM32F4 env:BIGTREE_SKR_PRO
#elif MB(BIGTREE_GTR_V1_0)
#include "stm32/pins_BTT_GTR_V1_0.h" // STM32F4 env:BIGTREE_GTR
#elif MB(BIGTREE_BTT002_V1_0)
#include "stm32/pins_BTT_BTT002_V1_0.h" // STM32F4 env:BIGTREE_BTT002
#elif MB(LERDGE_K)
@ -713,6 +715,24 @@
#ifndef E5_MS3_PIN
#define E5_MS3_PIN -1
#endif
#ifndef E6_MS1_PIN
#define E6_MS1_PIN -1
#endif
#ifndef E6_MS2_PIN
#define E6_MS2_PIN -1
#endif
#ifndef E6_MS3_PIN
#define E6_MS3_PIN -1
#endif
#ifndef E7_MS1_PIN
#define E7_MS1_PIN -1
#endif
#ifndef E7_MS2_PIN
#define E7_MS2_PIN -1
#endif
#ifndef E7_MS3_PIN
#define E7_MS3_PIN -1
#endif
#ifndef E0_STEP_PIN
#define E0_STEP_PIN -1
@ -768,6 +788,24 @@
#ifndef E5_ENABLE_PIN
#define E5_ENABLE_PIN -1
#endif
#ifndef E6_STEP_PIN
#define E6_STEP_PIN -1
#endif
#ifndef E6_DIR_PIN
#define E6_DIR_PIN -1
#endif
#ifndef E6_ENABLE_PIN
#define E6_ENABLE_PIN -1
#endif
#ifndef E7_STEP_PIN
#define E7_STEP_PIN -1
#endif
#ifndef E7_DIR_PIN
#define E7_DIR_PIN -1
#endif
#ifndef E7_ENABLE_PIN
#define E7_ENABLE_PIN -1
#endif
#ifndef X_CS_PIN
#define X_CS_PIN -1
@ -796,6 +834,12 @@
#ifndef E5_CS_PIN
#define E5_CS_PIN -1
#endif
#ifndef E6_CS_PIN
#define E6_CS_PIN -1
#endif
#ifndef E7_CS_PIN
#define E7_CS_PIN -1
#endif
#ifndef FAN_PIN
#define FAN_PIN -1
@ -839,6 +883,12 @@
#ifndef HEATER_5_PIN
#define HEATER_5_PIN -1
#endif
#ifndef HEATER_6_PIN
#define HEATER_6_PIN -1
#endif
#ifndef HEATER_7_PIN
#define HEATER_7_PIN -1
#endif
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN -1
#endif
@ -861,6 +911,12 @@
#ifndef TEMP_5_PIN
#define TEMP_5_PIN -1
#endif
#ifndef TEMP_6_PIN
#define TEMP_6_PIN -1
#endif
#ifndef TEMP_7_PIN
#define TEMP_7_PIN -1
#endif
#ifndef TEMP_BED_PIN
#define TEMP_BED_PIN -1
#endif
@ -940,6 +996,20 @@
#define E5_AUTO_FAN_PIN -1
#endif
#endif
#ifndef E6_AUTO_FAN_PIN
#ifdef ORIG_E6_AUTO_FAN_PIN
#define E6_AUTO_FAN_PIN ORIG_E6_AUTO_FAN_PIN
#else
#define E6_AUTO_FAN_PIN -1
#endif
#endif
#ifndef E7_AUTO_FAN_PIN
#ifdef ORIG_E7_AUTO_FAN_PIN
#define E7_AUTO_FAN_PIN ORIG_E7_AUTO_FAN_PIN
#else
#define E7_AUTO_FAN_PIN -1
#endif
#endif
#ifndef CHAMBER_AUTO_FAN_PIN
#ifdef ORIG_CHAMBER_AUTO_FAN_PIN
#define CHAMBER_AUTO_FAN_PIN ORIG_CHAMBER_AUTO_FAN_PIN

153
Marlin/src/pins/pinsDebug_list.h
View File

@ -153,6 +153,24 @@
#if !PIN_EXISTS(E5_MS3)
#undef E5_MS3_PIN
#endif
#if !PIN_EXISTS(E6_MS1)
#undef E6_MS1_PIN
#endif
#if !PIN_EXISTS(E6_MS2)
#undef E6_MS2_PIN
#endif
#if !PIN_EXISTS(E6_MS3)
#undef E6_MS3_PIN
#endif
#if !PIN_EXISTS(E7_MS1)
#undef E7_MS1_PIN
#endif
#if !PIN_EXISTS(E7_MS2)
#undef E7_MS2_PIN
#endif
#if !PIN_EXISTS(E7_MS3)
#undef E7_MS3_PIN
#endif
#if !PIN_EXISTS(E0_STEP)
#undef E0_STEP_PIN
@ -208,6 +226,24 @@
#if !PIN_EXISTS(E5_ENABLE)
#undef E5_ENABLE_PIN
#endif
#if !PIN_EXISTS(E6_STEP)
#undef E6_STEP_PIN
#endif
#if !PIN_EXISTS(E6_DIR)
#undef E6_DIR_PIN
#endif
#if !PIN_EXISTS(E6_ENABLE)
#undef E6_ENABLE_PIN
#endif
#if !PIN_EXISTS(E7_STEP)
#undef E7_STEP_PIN
#endif
#if !PIN_EXISTS(E7_DIR)
#undef E7_DIR_PIN
#endif
#if !PIN_EXISTS(E7_ENABLE)
#undef E7_ENABLE_PIN
#endif
#if !PIN_EXISTS(X_CS)
#undef X_CS_PIN
@ -236,6 +272,12 @@
#if !PIN_EXISTS(E5_CS)
#undef E5_CS_PIN
#endif
#if !PIN_EXISTS(E6_CS)
#undef E6_CS_PIN
#endif
#if !PIN_EXISTS(E7_CS)
#undef E7_CS_PIN
#endif
#if !PIN_EXISTS(FAN)
#undef FAN_PIN
@ -247,6 +289,21 @@
#if !PIN_EXISTS(FAN2)
#undef FAN2_PIN
#endif
#if !PIN_EXISTS(FAN3)
#undef FAN3_PIN
#endif
#if !PIN_EXISTS(FAN4)
#undef FAN4_PIN
#endif
#if !PIN_EXISTS(FAN5)
#undef FAN5_PIN
#endif
#if !PIN_EXISTS(FAN6)
#undef FAN6_PIN
#endif
#if !PIN_EXISTS(FAN7)
#undef FAN7_PIN
#endif
#if !PIN_EXISTS(CONTROLLER_FAN)
#undef CONTROLLER_FAN_PIN
#endif
@ -279,6 +336,12 @@
#if !PIN_EXISTS(HEATER_5)
#undef HEATER_5_PIN
#endif
#if !PIN_EXISTS(HEATER_6)
#undef HEATER_6_PIN
#endif
#if !PIN_EXISTS(HEATER_7)
#undef HEATER_7_PIN
#endif
#if !PIN_EXISTS(HEATER_BED)
#undef HEATER_BED_PIN
#endif
@ -301,6 +364,12 @@
#if !PIN_EXISTS(TEMP_5)
#undef TEMP_5_PIN
#endif
#if !PIN_EXISTS(TEMP_6)
#undef TEMP_6_PIN
#endif
#if !PIN_EXISTS(TEMP_7)
#undef TEMP_7_PIN
#endif
#if !PIN_EXISTS(TEMP_BED)
#undef TEMP_BED_PIN
#endif
@ -363,6 +432,12 @@
#if PIN_EXISTS(TEMP_5) && TEMP_5_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(__LINE__, TEMP_5_PIN)
#endif
#if PIN_EXISTS(TEMP_6) && TEMP_6_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(__LINE__, TEMP_6_PIN)
#endif
#if PIN_EXISTS(TEMP_7) && TEMP_7_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(__LINE__, TEMP_7_PIN)
#endif
#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN)
#endif
@ -686,6 +761,54 @@
#if PIN_EXISTS(E5_STEP)
REPORT_NAME_DIGITAL(__LINE__, E5_STEP_PIN)
#endif
#if PIN_EXISTS(E6_AUTO_FAN)
REPORT_NAME_DIGITAL(__LINE__, E6_AUTO_FAN_PIN)
#endif
#if PIN_EXISTS(E6_CS)
REPORT_NAME_DIGITAL(__LINE__, E6_CS_PIN)
#endif
#if PIN_EXISTS(E6_DIR)
REPORT_NAME_DIGITAL(__LINE__, E6_DIR_PIN)
#endif
#if PIN_EXISTS(E6_ENABLE)
REPORT_NAME_DIGITAL(__LINE__, E6_ENABLE_PIN)
#endif
#if PIN_EXISTS(E6_MS1)
REPORT_NAME_DIGITAL(__LINE__, E6_MS1_PIN)
#endif
#if PIN_EXISTS(E6_MS2)
REPORT_NAME_DIGITAL(__LINE__, E6_MS2_PIN)
#endif
#if PIN_EXISTS(E6_MS3)
REPORT_NAME_DIGITAL(__LINE__, E6_MS3_PIN)
#endif
#if PIN_EXISTS(E6_STEP)
REPORT_NAME_DIGITAL(__LINE__, E6_STEP_PIN)
#endif
#if PIN_EXISTS(E7_AUTO_FAN)
REPORT_NAME_DIGITAL(__LINE__, E7_AUTO_FAN_PIN)
#endif
#if PIN_EXISTS(E7_CS)
REPORT_NAME_DIGITAL(__LINE__, E7_CS_PIN)
#endif
#if PIN_EXISTS(E7_DIR)
REPORT_NAME_DIGITAL(__LINE__, E7_DIR_PIN)
#endif
#if PIN_EXISTS(E7_ENABLE)
REPORT_NAME_DIGITAL(__LINE__, E7_ENABLE_PIN)
#endif
#if PIN_EXISTS(E7_MS1)
REPORT_NAME_DIGITAL(__LINE__, E7_MS1_PIN)
#endif
#if PIN_EXISTS(E7_MS2)
REPORT_NAME_DIGITAL(__LINE__, E7_MS2_PIN)
#endif
#if PIN_EXISTS(E7_MS3)
REPORT_NAME_DIGITAL(__LINE__, E7_MS3_PIN)
#endif
#if PIN_EXISTS(E7_STEP)
REPORT_NAME_DIGITAL(__LINE__, E7_STEP_PIN)
#endif
#if defined(ENET_CRS) && ENET_CRS >= 0
REPORT_NAME_DIGITAL(__LINE__, ENET_CRS)
#endif
@ -765,6 +888,18 @@
#if PIN_EXISTS(FAN3)
REPORT_NAME_DIGITAL(__LINE__, FAN3_PIN)
#endif
#if PIN_EXISTS(FAN4)
REPORT_NAME_DIGITAL(__LINE__, FAN4_PIN)
#endif
#if PIN_EXISTS(FAN5)
REPORT_NAME_DIGITAL(__LINE__, FAN5_PIN)
#endif
#if PIN_EXISTS(FAN6)
REPORT_NAME_DIGITAL(__LINE__, FAN6_PIN)
#endif
#if PIN_EXISTS(FAN7)
REPORT_NAME_DIGITAL(__LINE__, FAN7_PIN)
#endif
#if PIN_EXISTS(FIL_RUNOUT)
REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT_PIN)
#endif
@ -936,6 +1071,12 @@
#if PIN_EXISTS(ORIG_E5_AUTO_FAN)
REPORT_NAME_DIGITAL(__LINE__, ORIG_E5_AUTO_FAN_PIN)
#endif
#if PIN_EXISTS(ORIG_E6_AUTO_FAN)
REPORT_NAME_DIGITAL(__LINE__, ORIG_E6_AUTO_FAN_PIN)
#endif
#if PIN_EXISTS(ORIG_E7_AUTO_FAN)
REPORT_NAME_DIGITAL(__LINE__, ORIG_E7_AUTO_FAN_PIN)
#endif
#if PIN_EXISTS(PHOTOGRAPH)
REPORT_NAME_DIGITAL(__LINE__, PHOTOGRAPH_PIN)
#endif
@ -1455,6 +1596,18 @@
#if PIN_EXISTS(E5_SERIAL_RX)
REPORT_NAME_DIGITAL(__LINE__, E5_SERIAL_RX_PIN)
#endif
#if PIN_EXISTS(E6_SERIAL_TX)
REPORT_NAME_DIGITAL(__LINE__, E6_SERIAL_TX_PIN)
#endif
#if PIN_EXISTS(E6_SERIAL_RX)
REPORT_NAME_DIGITAL(__LINE__, E6_SERIAL_RX_PIN)
#endif
#if PIN_EXISTS(E7_SERIAL_TX)
REPORT_NAME_DIGITAL(__LINE__, E7_SERIAL_TX_PIN)
#endif
#if PIN_EXISTS(E7_SERIAL_RX)
REPORT_NAME_DIGITAL(__LINE__, E7_SERIAL_RX_PIN)
#endif
#if PIN_EXISTS(L6470_CHAIN_SCK)
REPORT_NAME_DIGITAL(__LINE__, L6470_CHAIN_SCK_PIN)
#endif

104
Marlin/src/pins/sensitive_pins.h
View File

@ -277,6 +277,54 @@
#endif
#endif
#define _E6_CS
#define _E6_MS2
#define _E6_MS3
#define _E6_MS4
#if E_NEEDED(6)
#if PIN_EXISTS(E6_CS) && AXIS_HAS_SPI(E6)
#undef _E6_CS
#define _E6_CS E6_CS_PIN,
#endif
#if PIN_EXISTS(E6_MS2)
#undef _E6_MS2
#define _E6_MS2 E6_MS2_PIN,
#endif
#if PIN_EXISTS(E6_MS3)
#undef _E6_MS3
#define _E6_MS3 E6_MS3_PIN,
#endif
#if PIN_EXISTS(E6_MS4)
#undef _E6_MS4
#define _E6_MS4 E6_MS4_PIN,
#endif
#endif
#define _E7_CS
#define _E7_MS3
#define _E7_MS4
#define _E7_MS5
#if E_NEEDED(7)
#if PIN_EXISTS(E7_CS) && AXIS_HAS_SPI(E7)
#undef _E7_CS
#define _E7_CS E7_CS_PIN,
#endif
#if PIN_EXISTS(E7_MS3)
#undef _E7_MS3
#define _E7_MS3 E7_MS3_PIN,
#endif
#if PIN_EXISTS(E7_MS4)
#undef _E7_MS4
#define _E7_MS4 E7_MS4_PIN,
#endif
#if PIN_EXISTS(E7_MS5)
#undef _E7_MS5
#define _E7_MS5 E7_MS5_PIN,
#endif
#endif
//
// E Steppers
//
@ -287,6 +335,8 @@
#define _E3_PINS
#define _E4_PINS
#define _E5_PINS
#define _E6_PINS
#define _E7_PINS
#if EXTRUDERS
#undef _E0_PINS
@ -303,7 +353,9 @@
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, _E2_CS _E2_MS1 _E2_MS2 _E2_MS3
#endif
#endif
#elif EXTRUDERS > 1 || ENABLED(MIXING_EXTRUDER)
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, _E1_CS _E1_MS1 _E1_MS2 _E1_MS3
#if EXTRUDERS > 2 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 2)
@ -318,10 +370,19 @@
#if EXTRUDERS > 5 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 5)
#undef _E5_PINS
#define _E5_PINS E5_STEP_PIN, E5_DIR_PIN, E5_ENABLE_PIN, _E5_CS _E5_MS1 _E5_MS2 _E5_MS3
#if EXTRUDERS > 6 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 6)
#undef _E6_PINS
#define _E6_PINS E6_STEP_PIN, E6_DIR_PIN, E6_ENABLE_PIN, _E6_CS _E6_MS1 _E6_MS2 _E6_MS3
#if EXTRUDERS > 7 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 7)
#undef _E7_PINS
#define _E7_PINS E7_STEP_PIN, E7_DIR_PIN, E7_ENABLE_PIN, _E7_CS _E7_MS1 _E7_MS2 _E7_MS3
#endif // EXTRUDERS > 7 || MIXING_EXTRUDER > 7
#endif // EXTRUDERS > 6 || MIXING_EXTRUDER > 6
#endif // EXTRUDERS > 5 || MIXING_EXTRUDER > 5
#endif // EXTRUDERS > 4 || MIXING_EXTRUDER > 4
#endif // EXTRUDERS > 3 || MIXING_EXTRUDER > 3
#endif // EXTRUDERS > 2 || MIXING_EXTRUDER > 2
#endif // EXTRUDERS > 1 || MIXING_EXTRUDER
//
@ -334,6 +395,8 @@
#define _H3_PINS
#define _H4_PINS
#define _H5_PINS
#define _H6_PINS
#define _H7_PINS
#if HOTENDS
#undef _H0_PINS
@ -353,6 +416,14 @@
#if HOTENDS > 5
#undef _H5_PINS
#define _H5_PINS HEATER_5_PIN, E5_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_5_PIN),
#if HOTENDS > 6
#undef _H6_PINS
#define _H6_PINS HEATER_6_PIN, E6_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_6_PIN),
#if HOTENDS > 7
#undef _H7_PINS
#define _H7_PINS HEATER_7_PIN, E7_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_7_PIN),
#endif // HOTENDS > 7
#endif // HOTENDS > 6
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
@ -539,6 +610,31 @@
#else
#define _FAN2
#endif
#if PIN_EXISTS(FAN3)
#define _FAN3 FAN3_PIN,
#else
#define _FAN3
#endif
#if PIN_EXISTS(FAN4)
#define _FAN4 FAN4_PIN,
#else
#define _FAN4
#endif
#if PIN_EXISTS(FAN5)
#define _FAN5 FAN5_PIN,
#else
#define _FAN5
#endif
#if PIN_EXISTS(FAN6)
#define _FAN6 FAN6_PIN,
#else
#define _FAN6
#endif
#if PIN_EXISTS(FAN7)
#define _FAN7 FAN7_PIN,
#else
#define _FAN7
#endif
#if PIN_EXISTS(CONTROLLER_FAN)
#define _FANC CONTROLLER_FAN_PIN,
#else
@ -550,9 +646,9 @@
#endif
#define SENSITIVE_PINS { \
_X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS \
_Z_PROBE _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS \
_BED_PINS _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS \
_PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FANC \
_X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS _Z_PROBE \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _E6_PINS _E7_PINS _BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS _H6_PINS _H7_PINS \
_PS_ON _HEATER_BED _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \
HAL_SENSITIVE_PINS \
}

391
Marlin/src/pins/stm32/pins_BTT_GTR_V1_0.h Normal file
View File

@ -0,0 +1,391 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifndef TARGET_STM32F4
#error "Oops! Select an STM32F4 board in 'Tools > Board.'"
#elif HOTENDS > 8 || E_STEPPERS > 8
#error "BIGTREE GTR V1.0 supports up to 8 hotends / E-steppers."
#elif HOTENDS > MAX_EXTRUDERS || E_STEPPERS > MAX_EXTRUDERS
#error "Marlin extruder/hotends limit! Increase MAX_EXTRUDERS to continue."
#endif
#define BOARD_INFO_NAME "BIGTREE GTR 1.0"
// Use one of these or SDCard-based Emulation will be used
//#define I2C_EEPROM
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
#define TP // Enable to define servo and probe pins
//
// Servos
//
#if ENABLED(TP)
#define SERVO0_PIN PB11
#endif
#define PS_ON_PIN PH6
//
// Limit Switches
//
#define X_MIN_PIN PF2
#define X_MAX_PIN PG14
#define Y_MIN_PIN PC13
#define Y_MAX_PIN PG9
#define Z_MIN_PIN PE0
#define Z_MAX_PIN PD3
//
// Pins on the extender
//
//#define X_MIN_PIN PI4
//#define X2_MIN_PIN PF12
//#define Y_MIN_PIN PF4
//#define Y2_MIN_PIN PI7
//#define Z_MIN_PIN PF6
#if ENABLED(TP) && !defined(Z_MIN_PROBE_PIN)
#define Z_MIN_PROBE_PIN PH11 // Z Probe must be PH11
#endif
//
// Steppers
//
#define X_STEP_PIN PC15
#define X_DIR_PIN PF0
#define X_ENABLE_PIN PF1
#ifndef X_CS_PIN
#define X_CS_PIN PC14
#endif
#define Y_STEP_PIN PE3
#define Y_DIR_PIN PE2
#define Y_ENABLE_PIN PE4
#ifndef Y_CS_PIN
#define Y_CS_PIN PE1
#endif
#define Z_STEP_PIN PB8
#define Z_DIR_PIN PB7 // PB7
#define Z_ENABLE_PIN PB9
#ifndef Z_CS_PIN
#define Z_CS_PIN PB5
#endif
#define E0_STEP_PIN PG12
#define E0_DIR_PIN PG11
#define E0_ENABLE_PIN PG13
#ifndef E0_CS_PIN
#define E0_CS_PIN PG10
#endif
#define E1_STEP_PIN PD6
#define E1_DIR_PIN PD5
#define E1_ENABLE_PIN PD7
#ifndef E1_CS_PIN
#define E1_CS_PIN PD4
#endif
#define E2_STEP_PIN PD1
#define E2_DIR_PIN PD0
#define E2_ENABLE_PIN PD2
#ifndef E2_CS_PIN
#define E2_CS_PIN PC12
#endif
#define E3_STEP_PIN PF3
#define E3_DIR_PIN PG3
#define E3_ENABLE_PIN PF8
#ifndef E3_CS_PIN
#define E3_CS_PIN PG4
#endif
#define E4_STEP_PIN PD14
#define E4_DIR_PIN PD11
#define E4_ENABLE_PIN PG2
#ifndef E4_CS_PIN
#define E4_CS_PIN PE15
#endif
#define E5_STEP_PIN PE12
#define E5_DIR_PIN PE10
#define E5_ENABLE_PIN PF14
#ifndef E5_CS_PIN
#define E5_CS_PIN PE7
#endif
#define E6_STEP_PIN PG0
#define E6_DIR_PIN PG1
#define E6_ENABLE_PIN PE8
#ifndef E6_CS_PIN
#define E6_CS_PIN PF15
#endif
#define E7_STEP_PIN PH12
#define E7_DIR_PIN PH15
#define E7_ENABLE_PIN PI0
#ifndef E7_CS_PIN
#define E7_CS_PIN PH14
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PG15
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PB6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PB3
#endif
#endif
#if HAS_TMC220x
/**
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
//#define E5_HARDWARE_SERIAL Serial1
//#define E6_HARDWARE_SERIAL Serial1
//#define E7_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN PC14
#define X_SERIAL_RX_PIN PC14
#define Y_SERIAL_TX_PIN PE1
#define Y_SERIAL_RX_PIN PE1
#define Z_SERIAL_TX_PIN PB5
#define Z_SERIAL_RX_PIN PB5
#define E0_SERIAL_TX_PIN PG10
#define E0_SERIAL_RX_PIN PG10
#define E1_SERIAL_TX_PIN PD4
#define E1_SERIAL_RX_PIN PD4
#define E2_SERIAL_TX_PIN PC12
#define E2_SERIAL_RX_PIN PC12
#define E3_SERIAL_TX_PIN PG4
#define E3_SERIAL_RX_PIN PG4
#define E4_SERIAL_TX_PIN PE15
#define E4_SERIAL_RX_PIN PE15
#define E5_SERIAL_TX_PIN PE7
#define E5_SERIAL_RX_PIN PE7
#define E6_SERIAL_TX_PIN PF15
#define E6_SERIAL_RX_PIN PF15
#define E7_SERIAL_TX_PIN PH14
#define E7_SERIAL_RX_PIN PH14
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PC1 // T1 <-> E0
#define TEMP_1_PIN PC2 // T2 <-> E1
#define TEMP_2_PIN PC3 // T3 <-> E2
#define TEMP_3_PIN PA3 // T4 <-> E3
#define TEMP_4_PIN PF9 // T5 <-> E4
#define TEMP_5_PIN PF10 // T6 <-> E5
//#define TEMP_6_PIN PF7 // T7 <-> E6
//#define TEMP_7_PIN PF5 // T8 <-> E7
#define TEMP_BED_PIN PC0 // T0 <-> Bed
// SPI for Max6675 or Max31855 Thermocouple
// Uses a separate SPI bus
// If you have a two-way thermocouple, you can customize two THERMO_CSx_PIN pins (x:1~2)
#define THERMO_SCK_PIN PI1 // SCK
#define THERMO_DO_PIN PI2 // MISO
#define THERMO_CS1_PIN PH9 // CS1
#define THERMO_CS2_PIN PH2 // CS2
#define MAX6675_SS_PIN THERMO_CS1_PIN
#define MAX6675_SS2_PIN THERMO_CS2_PIN
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN
//
// Heaters / Fans
//
#define HEATER_0_PIN PB1 // Heater0
#define HEATER_1_PIN PA1 // Heater1
#define HEATER_2_PIN PB0 // Heater2
#define HEATER_3_PIN PD15 // Heater3
#define HEATER_4_PIN PD13 // Heater4
#define HEATER_5_PIN PD12 // Heater5
//#define HEATER_6_PIN PE13 // Heater6
//#define HEATER_7_PIN PI6 // Heater7
#define HEATER_BED_PIN PA2 // Hotbed
#define FAN_PIN PE5 // Fan0
#define FAN1_PIN PE6 // Fan1
#define FAN2_PIN PC8 // Fan2
#define FAN3_PIN PI5 // Fan3
#define FAN4_PIN PE9 // Fan4
#define FAN5_PIN PE11 // Fan5
//#define FAN6_PIN PC9 // Fan6
//#define FAN7_PIN PE14 // Fan7
//
// By default the onboard SD (SPI1) is enabled
//
#define CUSTOM_SPI_PINS
#if DISABLED(CUSTOM_SPI_PINS)
#define SDSS PB12
#endif
// HAL SPI1 pins group
#if ENABLED(CUSTOM_SPI_PINS)
#define SDSS PA4
#define SD_DETECT_PIN PC4
#define LCD_SDSS PA4
#define SCK_PIN PA5
#define MISO_PIN PA6
#define MOSI_PIN PA7
#define SS_PIN PA4 // Chip select for SD card used by Marlin
#endif
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | PB10(SD_DETECT) (LCD_D7) PG5 | · · | PG6 (LCD_D6)
* (MOSI)PB15 | · · | PH10(BTN_EN2) (LCD_D5) PG7 | · · | PG8 (LCD_D4)
* (SD_SS)PB12 | · · | PD10(BTN_EN1) (LCD_RS) PA8 | · · | PC10 (LCD_EN)
* (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA15 | · · | PC11 (BEEPER)
* ￣￣ ￣￣
* EXP2 EXP1
*/
//
// LCDs and Controllers
//
#if HAS_SPI_LCD
#define BEEPER_PIN PC11
#define BTN_ENC PA15
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS PA8
#define BTN_EN1 PD10
#define BTN_EN2 PH10
#define LCD_PINS_ENABLE PG7
#define LCD_PINS_D4 PG8
//#undef ST7920_DELAY_1
//#undef ST7920_DELAY_2
//#undef ST7920_DELAY_3
#else
#define LCD_PINS_RS PA8
#define BTN_EN1 PD10
#define BTN_EN2 PH10
#if DISABLED(CUSTOM_SPI_PINS)
#define SD_DETECT_PIN PB10
#define LCD_SDSS PB12
#endif
#define LCD_PINS_ENABLE PC10
#define LCD_PINS_D4 PG8
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS PC10
#define DOGLCD_A0 PA8
//#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PG8 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PG7
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN PG6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN PG5
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN PF13
#endif
#endif // !FYSETC_MINI_12864
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PG7
#define LCD_PINS_D6 PG6
#define LCD_PINS_D7 PG5
#endif
#endif
// Alter timing for graphical display
#if HAS_GRAPHICAL_LCD
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
#define BOARD_ST7920_DELAY_3 DELAY_NS(600)
#endif
//#define DOGLCD_CS PB12
//#define DOGLCD_A0 PA8
//#define LCD_PINS_DC PB14
//#define DOGLCD_MOSI PB15
#endif // HAS_SPI_LCD

49
buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c
View File

@ -90,8 +90,13 @@ const PinMap PinMap_I2C_SDA[] = {
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
{PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
#if STM32F4X_PIN_NUM >= 144 // 144 pins mcu, 114 gpio
#if STM32F4X_PIN_NUM >= 176
{PH_5, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PH_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
#else
{PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
#endif
#endif
{NC, NP, 0}
};
@ -103,8 +108,14 @@ const PinMap PinMap_I2C_SCL[] = {
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
#if STM32F4X_PIN_NUM >= 144 // 144 pins mcu, 114 gpio
#if STM32F4X_PIN_NUM >= 176
//{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PH_4, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
{PH_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
#else
{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
#endif
#endif
{NC, NP, 0}
};
@ -141,8 +152,10 @@ const PinMap PinMap_PWM[] = {
*/
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
//{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
@ -173,7 +186,7 @@ const PinMap PinMap_PWM[] = {
//{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
//{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
//{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
//{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
//{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
//{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
@ -186,21 +199,28 @@ const PinMap PinMap_PWM[] = {
//{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
//{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
//{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
//{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
//{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
//{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
//{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
//{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
//{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
//{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
//{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
//{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
//{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
//{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
//{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
//{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
#endif
#if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio
{PH_10, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
{PH_6, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
//{PH_11, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
{PI_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
{PI_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
#endif
{NC, NP, 0}
};
#endif
@ -275,7 +295,8 @@ const PinMap PinMap_UART_CTS[] = {
#ifdef HAL_SPI_MODULE_ENABLED
const PinMap PinMap_SPI_MOSI[] = {
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
//{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
{NC, NP, 0}

33
platformio.ini
View File

@ -586,7 +586,7 @@ lib_ignore = Adafruit NeoPixel
#
# STM32F401VE
# 'STEVAL-3DP001)' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
#
[env:STM32F401VE_STEVAL]
platform = ststm32
@ -677,6 +677,37 @@ src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
debug_tool = stlink
debug_init_break =
#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
#
[env:BIGTREE_GTR_V1_0]
platform = ststm32@>=5.7.0
framework = arduino
platform_packages = framework-arduinoststm32@>=3.10700.191028
board = BigTree_SKR_Pro
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common.build_flags}
-DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407IG\"
-DTARGET_STM32F4 -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
-DHAVE_HWSERIAL3
-DHAVE_HWSERIAL6
-DPIN_SERIAL3_RX=PD_9
-DPIN_SERIAL3_TX=PD_8
-DPIN_SERIAL6_RX=PC_7
-DPIN_SERIAL6_TX=PC_6
-IMarlin/src/HAL/HAL_STM32
lib_deps =
U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
LiquidCrystal
TMCStepper@>=0.5.2,<1.0.0
Adafruit NeoPixel
LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
lib_ignore = SoftwareSerial, SoftwareSerialM
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000
#
# BigTreeTech BTT002 (STM32F407VET6 ARM Cortex-M4)
#