MKS Eagle (STM32F407VET6) board (#22897)

This commit is contained in:
mks-viva 2021-10-12 20:01:18 -05:00 committed by Scott Lahteine
parent 031f17b4f3
commit 0f519ebf85
6 changed files with 458 additions and 342 deletions

View File

@ -402,6 +402,7 @@
#define BOARD_TH3D_EZBOARD_LITE_V2 4232 // TH3D EZBoard Lite v2.0
#define BOARD_INDEX_REV03 4233 // Index PnP Controller REV03 (STM32F407VET6/VGT6)
#define BOARD_MKS_ROBIN_NANO_V1_3_F4 4234 // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VET6)
#define BOARD_MKS_EAGLE 4235 // MKS Eagle (STM32F407VET6)
//
// ARM Cortex M7

View File

@ -651,6 +651,8 @@
#include "stm32f4/pins_INDEX_REV03.h" // STM32F4 env:Index_Mobo_Rev03
#elif MB(MKS_ROBIN_NANO_V1_3_F4)
#include "stm32f4/pins_MKS_ROBIN_NANO_V1_3_F4.h" // STM32F4 env:mks_robin_nano_v1_3_f4
#elif MB(MKS_EAGLE)
#include "stm32f4/pins_MKS_EAGLE.h" // STM32F4 env:mks_eagle
//
// ARM Cortex M7

View File

@ -0,0 +1,35 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define ALLOW_STM32DUINO
#include "env_validate.h"
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Eagle supports up to 2 hotends / E-steppers."
#elif HAS_FSMC_TFT
#error "MKS Eagle doesn't support FSMC-based TFT displays."
#endif
#define BOARD_INFO_NAME "MKS Eagle"
#include "pins_MKS_ROBIN_NANO_V3_common.h"

View File

@ -32,80 +32,22 @@
#define BOARD_INFO_NAME "MKS Robin Nano V3"
// USB Flash Drive support
#define HAS_OTG_USB_HOST_SUPPORT
// Avoid conflict with TIMER_TONE
#define STEP_TIMER 10
// Use one of these or SDCard-based Emulation will be used
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#define I2C_SCL_PIN PB6
#define I2C_SDA_PIN PB7
#endif
//
// Release PB4 (Z_DIR_PIN) from JTAG NRST role
//
//#define DISABLE_DEBUG
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
#define X_DIAG_PIN PA15
#define Y_DIAG_PIN PD2
#define Z_DIAG_PIN PC8
#define E0_DIAG_PIN PC4
#define E1_DIAG_PIN PE7
#define X_STOP_PIN X_DIAG_PIN
#define Y_STOP_PIN Y_DIAG_PIN
#define Z_MIN_PIN Z_DIAG_PIN
#define Z_MAX_PIN E0_DIAG_PIN
//
// Steppers
//
#define X_ENABLE_PIN PE4
#define X_STEP_PIN PE3
#define X_DIR_PIN PE2
#ifndef X_CS_PIN
#define X_CS_PIN PD5
#endif
#define Y_ENABLE_PIN PE1
#define Y_STEP_PIN PE0
#define Y_DIR_PIN PB9
#ifndef Y_CS_PIN
#define Y_CS_PIN PD7
#endif
#define Z_ENABLE_PIN PB8
#define Z_STEP_PIN PB5
#define Z_DIR_PIN PB4
#ifndef Z_CS_PIN
#define Z_CS_PIN PD4
#endif
#define E0_ENABLE_PIN PB3
#define E0_STEP_PIN PD6
#define E0_DIR_PIN PD3
#ifndef E0_CS_PIN
#define E0_CS_PIN PD9
#endif
#define E1_ENABLE_PIN PA3
#define E1_STEP_PIN PD15
#define E1_DIR_PIN PA1
#ifndef E1_CS_PIN
#define E1_CS_PIN PD8
#endif
@ -129,287 +71,4 @@
#endif
#endif
#if HAS_TMC_UART
//
// Software serial
// No Hardware serial for steppers
//
#define X_SERIAL_TX_PIN PD5
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PD7
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PD4
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PD9
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN PD8
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PC1 // TH1
#define TEMP_1_PIN PA2 // TH2
#define TEMP_BED_PIN PC0 // TB1
//
// Heaters / Fans
//
#define HEATER_0_PIN PE5 // HEATER1
#define HEATER_1_PIN PB0 // HEATER2
#define HEATER_BED_PIN PA0 // HOT BED
#define FAN_PIN PC14 // FAN
#define FAN1_PIN PB1 // FAN1
//
// Thermocouples
//
//#define TEMP_0_CS_PIN HEATER_0_PIN // TC1 - CS1
//#define TEMP_0_CS_PIN HEATER_1_PIN // TC2 - CS2
//
// Misc. Functions
//
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4 // MT_DET
#define MT_DET_2_PIN PE6
#define MT_DET_PIN_STATE LOW
#endif
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1_PIN
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN MT_DET_2_PIN
#endif
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PA13 // PW_DET
#endif
//#define SUICIDE_PIN PB2
//#define LED_PIN PB2
//#define KILL_PIN PA2
//#define KILL_PIN_STATE LOW
//
// Power Supply Control
//
#if ENABLED(MKS_PWC)
#if ENABLED(TFT_LVGL_UI)
#undef PSU_CONTROL
#undef MKS_PWC
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_STATE LOW
#else
#define PS_ON_PIN PB2 // PW_OFF
#endif
#define KILL_PIN PA13 // PW_DET
#define KILL_PIN_STATE HIGH
#endif
// Random Info
#define USB_SERIAL -1 // USB Serial
#define WIFI_SERIAL 3 // USART3
#define MKS_WIFI_MODULE_SERIAL 1 // USART1
#define MKS_WIFI_MODULE_SPI 2 // SPI2
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
// MKS WIFI MODULE
#if ENABLED(MKS_WIFI_MODULE)
#define WIFI_IO0_PIN PC13
#define WIFI_IO1_PIN PC7
#define WIFI_RESET_PIN PE9
#endif
// MKS TEST
#if ENABLED(MKS_TEST)
#define MKS_TEST_POWER_LOSS_PIN PA13 // PW_DET
#define MKS_TEST_PS_ON_PIN PB2 // PW_OFF
#endif
//
// Onboard SD card
//
// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
#if SD_CONNECTION_IS(ONBOARD)
#define ENABLE_SPI3
#define SD_SS_PIN -1
#define SDSS PC9
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12
#define SD_DETECT_PIN PD12
#endif
#define SPI_FLASH
#if ENABLED(SPI_FLASH)
#define HAS_SPI_FLASH 1
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PC3
#define SPI_FLASH_MISO_PIN PC2
#define SPI_FLASH_SCK_PIN PB13
#endif
/**
* ------ ------
* (BEEPER) PC5 |10 9 | PE13 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK)
* (LCD_EN) PD13 | 8 7 | PC6 (LCD_RS) (BTN_EN1) PE8 | 8 7 | PE10 (SPI1 CS)
* (LCD_D4) PE14 6 5 | PE15 (LCD_D5) (BTN_EN2) PE11 6 5 | PA7 (SPI1 MOSI)
* (LCD_D6) PD11 | 4 3 | PD10 (LCD_D7) (SPI1_RS) PE12 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PD10
#define EXP1_04_PIN PD11
#define EXP1_05_PIN PE15
#define EXP1_06_PIN PE14
#define EXP1_07_PIN PC6
#define EXP1_08_PIN PD13
#define EXP1_09_PIN PE13
#define EXP1_10_PIN PC5
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN PE12
#define EXP2_05_PIN PA7
#define EXP2_06_PIN PE11
#define EXP2_07_PIN PE10
#define EXP2_08_PIN PE8
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
//
// SPI SD Card
//
#if SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
//
// LCD / Controller
//
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS
#define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK
#define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO
#define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#ifndef TOUCH_CALIBRATION_X
#define TOUCH_CALIBRATION_X -17253
#endif
#ifndef TOUCH_CALIBRATION_Y
#define TOUCH_CALIBRATION_Y 11579
#endif
#ifndef TOUCH_OFFSET_X
#define TOUCH_OFFSET_X 514
#endif
#ifndef TOUCH_OFFSET_Y
#define TOUCH_OFFSET_Y -24
#endif
#ifndef TOUCH_ORIENTATION
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#endif
#elif HAS_WIRED_LCD
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_BACKLIGHT_PIN -1
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
#if ENABLED(MKS_MINI_12864)
//#define LCD_BACKLIGHT_PIN -1
//#define LCD_RESET_PIN -1
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_CS EXP1_05_PIN
//#define DOGLCD_SCK EXP2_09_PIN
//#define DOGLCD_MOSI EXP2_05_PIN
// Required for MKS_MINI_12864 with this board
//#define MKS_LCD12864B
//#undef SHOW_BOOTSCREEN
#elif ENABLED(MKS_MINI_12864_V3)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI
#endif
//#define LCD_SCREEN_ROT_180
#else // !MKS_MINI_12864
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#endif
#define BOARD_ST7920_DELAY_1 96
#define BOARD_ST7920_DELAY_2 48
#define BOARD_ST7920_DELAY_3 600
#endif // !MKS_MINI_12864
#endif // HAS_WIRED_LCD
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif
#include "pins_MKS_ROBIN_NANO_V3_common.h"

View File

@ -0,0 +1,375 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
//
// MKS Robin Nano V3, MKS Eagle pinmap
//
// USB Flash Drive support
#define HAS_OTG_USB_HOST_SUPPORT
// Avoid conflict with TIMER_TONE
#define STEP_TIMER 10
// Use one of these or SDCard-based Emulation will be used
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
#define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#define I2C_SCL_PIN PB6
#define I2C_SDA_PIN PB7
#endif
//
// Release PB4 (Z_DIR_PIN) from JTAG NRST role
//
//#define DISABLE_DEBUG
//
// Servos
//
#define SERVO0_PIN PA8 // Enable BLTOUCH
//
// Limit Switches
//
#define X_DIAG_PIN PA15
#define Y_DIAG_PIN PD2
#define Z_DIAG_PIN PC8
#define E0_DIAG_PIN PC4
#define E1_DIAG_PIN PE7
#define X_STOP_PIN X_DIAG_PIN
#define Y_STOP_PIN Y_DIAG_PIN
#define Z_MIN_PIN Z_DIAG_PIN
#define Z_MAX_PIN E0_DIAG_PIN
//
// Steppers
//
#define X_ENABLE_PIN PE4
#define X_STEP_PIN PE3
#define X_DIR_PIN PE2
#define Y_ENABLE_PIN PE1
#define Y_STEP_PIN PE0
#define Y_DIR_PIN PB9
#define Z_ENABLE_PIN PB8
#define Z_STEP_PIN PB5
#define Z_DIR_PIN PB4
#define E0_ENABLE_PIN PB3
#define E0_STEP_PIN PD6
#define E0_DIR_PIN PD3
#define E1_ENABLE_PIN PA3
#define E1_STEP_PIN PD15
#define E1_DIR_PIN PA1
#if HAS_TMC_UART
//
// Software serial
// No Hardware serial for steppers
//
#define X_SERIAL_TX_PIN PD5
#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PD7
#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PD4
#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PD9
#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN PD8
#define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN PC1 // TH1
#define TEMP_1_PIN PA2 // TH2
#define TEMP_BED_PIN PC0 // TB1
//
// Heaters / Fans
//
#define HEATER_0_PIN PE5 // HEATER1
#define HEATER_1_PIN PB0 // HEATER2
#define HEATER_BED_PIN PA0 // HOT BED
#define FAN_PIN PC14 // FAN
#define FAN1_PIN PB1 // FAN1
//
// Thermocouples
//
//#define TEMP_0_CS_PIN HEATER_0_PIN // TC1 - CS1
//#define TEMP_0_CS_PIN HEATER_1_PIN // TC2 - CS2
//
// Misc. Functions
//
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4 // MT_DET
#define MT_DET_2_PIN PE6
#define MT_DET_PIN_STATE LOW
#endif
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1_PIN
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN MT_DET_2_PIN
#endif
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PA13 // PW_DET
#endif
//#define SUICIDE_PIN PB2
//#define LED_PIN PB2
//#define KILL_PIN PA2
//#define KILL_PIN_STATE LOW
//
// Power Supply Control
//
#if ENABLED(MKS_PWC)
#if ENABLED(TFT_LVGL_UI)
#undef PSU_CONTROL
#undef MKS_PWC
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_STATE LOW
#else
#define PS_ON_PIN PB2 // PW_OFF
#endif
#define KILL_PIN PA13 // PW_DET
#define KILL_PIN_STATE HIGH
#endif
// Random Info
#define USB_SERIAL -1 // USB Serial
#define WIFI_SERIAL 3 // USART3
#define MKS_WIFI_MODULE_SERIAL 1 // USART1
#define MKS_WIFI_MODULE_SPI 2 // SPI2
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
// MKS WIFI MODULE
#if ENABLED(MKS_WIFI_MODULE)
#define WIFI_IO0_PIN PC13
#define WIFI_IO1_PIN PC7
#define WIFI_RESET_PIN PE9
#endif
// MKS TEST
#if ENABLED(MKS_TEST)
#define MKS_TEST_POWER_LOSS_PIN PA13 // PW_DET
#define MKS_TEST_PS_ON_PIN PB2 // PW_OFF
#endif
//
// Onboard SD card
//
// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
#if SD_CONNECTION_IS(ONBOARD)
#define ENABLE_SPI3
#define SD_SS_PIN -1
#define SDSS PC9
#define SD_SCK_PIN PC10
#define SD_MISO_PIN PC11
#define SD_MOSI_PIN PC12
#define SD_DETECT_PIN PD12
#endif
#define SPI_FLASH
#if ENABLED(SPI_FLASH)
#define HAS_SPI_FLASH 1
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PC3
#define SPI_FLASH_MISO_PIN PC2
#define SPI_FLASH_SCK_PIN PB13
#endif
/**
* ------ ------
* (BEEPER) PC5 |10 9 | PE13 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK)
* (LCD_EN) PD13 | 8 7 | PC6 (LCD_RS) (BTN_EN1) PE8 | 8 7 | PE10 (SPI1 CS)
* (LCD_D4) PE14 6 5 | PE15 (LCD_D5) (BTN_EN2) PE11 6 5 | PA7 (SPI1 MOSI)
* (LCD_D6) PD11 | 4 3 | PD10 (LCD_D7) (SPI1_RS) PE12 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PD10
#define EXP1_04_PIN PD11
#define EXP1_05_PIN PE15
#define EXP1_06_PIN PE14
#define EXP1_07_PIN PC6
#define EXP1_08_PIN PD13
#define EXP1_09_PIN PE13
#define EXP1_10_PIN PC5
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN PE12
#define EXP2_05_PIN PA7
#define EXP2_06_PIN PE11
#define EXP2_07_PIN PE10
#define EXP2_08_PIN PE8
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
//
// SPI SD Card
//
#if SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
//
// LCD / Controller
//
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS
#define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK
#define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO
#define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TFT_BUFFER_SIZE 14400
#ifndef TOUCH_CALIBRATION_X
#define TOUCH_CALIBRATION_X -17253
#endif
#ifndef TOUCH_CALIBRATION_Y
#define TOUCH_CALIBRATION_Y 11579
#endif
#ifndef TOUCH_OFFSET_X
#define TOUCH_OFFSET_X 514
#endif
#ifndef TOUCH_OFFSET_Y
#define TOUCH_OFFSET_Y -24
#endif
#ifndef TOUCH_ORIENTATION
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#endif
#elif HAS_WIRED_LCD
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_BACKLIGHT_PIN -1
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
#if ENABLED(MKS_MINI_12864)
//#define LCD_BACKLIGHT_PIN -1
//#define LCD_RESET_PIN -1
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_CS EXP1_05_PIN
//#define DOGLCD_SCK EXP2_09_PIN
//#define DOGLCD_MOSI EXP2_05_PIN
// Required for MKS_MINI_12864 with this board
//#define MKS_LCD12864B
//#undef SHOW_BOOTSCREEN
#elif ENABLED(MKS_MINI_12864_V3)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI
#endif
//#define LCD_SCREEN_ROT_180
#else // !MKS_MINI_12864
#define LCD_PINS_D4 EXP1_06_PIN
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#endif
#define BOARD_ST7920_DELAY_1 96
#define BOARD_ST7920_DELAY_2 48
#define BOARD_ST7920_DELAY_3 600
#endif // !MKS_MINI_12864
#endif // HAS_WIRED_LCD
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif

View File

@ -404,6 +404,49 @@ build_flags = ${env:mks_robin_nano_v3_usb_flash_drive.build_flags}
-DUSBD_USE_CDC_MSC
build_unflags = -DUSBD_USE_CDC
#
# MKS Eagle
# 5 TMC2209 uart mode on board
#
[env:mks_eagle]
platform = ${common_stm32.platform}
extends = stm32_variant
board = marlin_STM32F407VGT6_CCM
board_build.variant = MARLIN_F4x7Vx
board_build.offset = 0xC000
board_upload.offset_address = 0x0800C000
board_build.rename = mks_eagle.bin
build_flags = ${stm32_variant.build_flags} ${stm32f4_I2C1.build_flags}
-DHAL_PCD_MODULE_ENABLED
-DSTM32_FLASH_SIZE=512
debug_tool = jlink
upload_protocol = jlink
#
# MKS Eagle with USB Flash Drive Support
# Currently, using a STM32duino fork, until USB Host get merged
#
[env:mks_eagle_usb_flash_drive]
platform = ${common_stm32.platform}
extends = env:mks_eagle
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
-DUSE_USBHOST_HS
-DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6
-DUSE_USB_HS_IN_FS
#
# MKS Eagle with USB Flash Drive Support and Shared Media
# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged
#
[env:mks_eagle_usb_flash_drive_msc]
platform = ${common_stm32.platform}
extends = env:mks_eagle_usb_flash_drive
build_flags = ${env:mks_eagle_usb_flash_drive.build_flags}
-DUSBD_USE_CDC_MSC
build_unflags = -DUSBD_USE_CDC
#
# This I2C1(PB8:I2C1_SCL PB9:I2C1_SDA) is used by MKS Monster8
#
@ -423,6 +466,7 @@ board_upload.offset_address = 0x0800C000
board_build.rename = mks_monster8.bin
build_flags = ${stm32_variant.build_flags} ${stm32f4_I2C1_CAN.build_flags}
-DHAL_PCD_MODULE_ENABLED -DTIMER_SERIAL=TIM4
-DSTM32_FLASH_SIZE=512
debug_tool = jlink
upload_protocol = jlink