Fix duplicate board IDs (#14310)

This commit is contained in:
Bob Kuhn 2019-06-18 02:26:13 -05:00 committed by Scott Lahteine
parent 5307f42917
commit 089d12df16
3 changed files with 7 additions and 7 deletions

View File

@ -273,7 +273,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),304)
# Einsy Retro
else ifeq ($(HARDWARE_MOTHERBOARD),305)
# Elefu Ra Board (v3)
else ifeq ($(HARDWARE_MOTHERBOARD),21)
else ifeq ($(HARDWARE_MOTHERBOARD),23)
# Leapfrog
else ifeq ($(HARDWARE_MOTHERBOARD),999)
# Mega controller

View File

@ -112,7 +112,7 @@
#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a
#define BOARD_EINSY_RAMBO 304 // Einsy Rambo
#define BOARD_EINSY_RETRO 305 // Einsy Retro
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
#define BOARD_ELEFU_3 23 // Elefu Ra Board (v3)
#define BOARD_LEAPFROG 999 // Leapfrog
#define BOARD_MEGACONTROLLER 310 // Mega controller
#define BOARD_SCOOVO_X9H 321 // abee Scoovo X9H
@ -247,7 +247,7 @@
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // STM32F103RC
#define BOARD_JGAURORA_A5S_A1 1810 // JGAurora A5S A1 / STM32F103ZET6
#define BOARD_JGAURORA_A5S_A1 1820 // JGAurora A5S A1 / STM32F103ZET6
//
// STM32 ARM Cortex-M4F

View File

@ -1,7 +1,7 @@
Import("env")
# Relocate firmware from 0x08000000 to 0x0800A000
env['CPPDEFINES'].remove(("VECT_TAB_ADDR", "0x8000000"))
env['CPPDEFINES'].remove(("VECT_TAB_ADDR", "0x8000000"))
#alternatively, for STSTM <=5.1.0 use line below
#env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728))
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x0800A000"))
@ -9,7 +9,7 @@ env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/jgaurora_a5s_a1.
#append ${PROGNAME}.bin firmware after bootloader and save it as 'jgaurora_firmware.bin'
def addboot(source,target,env):
import os
import os
firmware = open(target[0].path, "rb")
lengthfirmware = os.path.getsize(target[0].path)
@ -29,7 +29,7 @@ def addboot(source,target,env):
while position < lengthfirmware:
byte = firmware.read(1)
firmwareimage.write(byte)
position += 1
position += 1
bootloader.close()
firmware.close()
firmwareimage.close()
@ -37,7 +37,7 @@ def addboot(source,target,env):
if os.path.exists(firmware_without_bootloader_dir):
os.remove(firmware_without_bootloader_dir)
os.rename(target[0].path, firmware_without_bootloader_dir)
#os.rename(target[0].dir.path+'/firmware_with_bootloader.bin', target[0].dir.path+'/firmware.bin')
#os.rename(target[0].dir.path+'/firmware_with_bootloader.bin', target[0].dir.path+'/firmware.bin')
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", addboot);