Fix tests for EXTRUDERS 0

This commit is contained in:
Scott Lahteine 2021-05-18 22:52:41 -05:00 committed by Scott Lahteine
parent 765720e98b
commit 046bac6769
2 changed files with 17 additions and 3 deletions

View File

@ -171,7 +171,10 @@ exec_test $1 $2 "Azteeg X3 | Mixing Extruder (x5) | Gradient Mix | Greek" "$3"
# Test Laser features with 12864 LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 EXTRUDERS 0 TEMP_SENSOR_1 0 SERIAL_PORT_2 2
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 EXTRUDERS 0 TEMP_SENSOR_1 0 SERIAL_PORT_2 2 \
DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }'
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \
LASER_FEATURE AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_COOLANT_FLOW_METER MEATPACK_ON_SERIAL_PORT_1
@ -181,7 +184,10 @@ exec_test $1 $2 "REPRAP MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air As
# Test Laser features with 44780 LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 EXTRUDERS 0 TEMP_SENSOR_1 0
opt_set MOTHERBOARD BOARD_RAMPS_14_EFB LCD_LANGUAGE en TEMP_SENSOR_COOLER 1 EXTRUDERS 0 TEMP_SENSOR_1 0 \
DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 400 }' \
DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }'
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \
LASER_FEATURE AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_COOLANT_FLOW_METER

View File

@ -45,6 +45,10 @@ restore_configs
opt_set MOTHERBOARD BOARD_RAMBO \
EXTRUDERS 0 TEMP_SENSOR_0 999 DUMMY_THERMISTOR_999_VALUE 170 Z_HOME_DIR 1 \
DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }' \
DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 4000 }' \
DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
AXIS_RELATIVE_MODES '{ false, false, false }' \
LEVEL_CORNERS_LEVELING_ORDER '{ LF, RF }'
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
@ -58,7 +62,11 @@ exec_test $1 $2 "Rambo CNC Configuration" "$3"
# Rambo heated bed only
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMBO EXTRUDERS 0 TEMP_SENSOR_BED 1
opt_set MOTHERBOARD BOARD_RAMBO EXTRUDERS 0 TEMP_SENSOR_BED 1 \
DEFAULT_AXIS_STEPS_PER_UNIT '{ 80, 80, 4000 }' \
DEFAULT_MAX_FEEDRATE '{ 300, 300, 5 }' \
DEFAULT_MAX_ACCELERATION '{ 3000, 3000, 100 }' \
AXIS_RELATIVE_MODES '{ false, false, false }'
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
exec_test $1 $2 "Rambo heated bed only" "$3"