2016-03-25 01:19:46 -05:00
/**
2016-03-24 13:01:20 -05:00
* Marlin 3 D Printer Firmware
* Copyright ( C ) 2016 MarlinFirmware [ https : //github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl .
* Copyright ( C ) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software : you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation , either version 3 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program . If not , see < http : //www.gnu.org/licenses/>.
*
*/
2015-03-20 00:22:23 -05:00
/**
* SanityCheck . h
*
* Test configuration values for errors at compile - time .
*/
# ifndef SANITYCHECK_H
2015-10-03 01:08:58 -05:00
# define SANITYCHECK_H
2015-03-20 00:22:23 -05:00
2016-03-26 21:26:57 -05:00
/**
* Due to the high number of issues related with old versions of Arduino IDE
* we are now warning our users to update their toolkits . In a future Marlin
* release we will stop supporting old IDE versions and will require user
* action to proceed with compilation in such environments .
*/
2016-04-11 13:03:06 -05:00
# if !defined(ARDUINO) || ARDUINO < 10600
2016-05-13 07:10:23 -05:00
# error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit."
2016-03-26 21:26:57 -05:00
# endif
2016-04-22 11:33:00 -05:00
/**
* We try our best to include sanity checks for all the changes configuration
* directives because people have a tendency to use outdated config files with
* the bleding edge source code , but sometimes this is not enough . This check
* will force a minimum config file revision , otherwise Marlin will not build .
*/
# if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION
2016-05-15 13:33:07 -05:00
# error "You are using an old Configuration.h file, update it before building Marlin."
2016-04-22 11:33:00 -05:00
# endif
# if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION
2016-05-15 13:33:07 -05:00
# error "You are using an old Configuration_adv.h file, update it before building Marlin."
2016-04-22 11:33:00 -05:00
# endif
2016-04-22 10:07:26 -05:00
/**
* Marlin release , version and default string
*/
# ifndef SHORT_BUILD_VERSION
2016-07-02 16:01:24 -05:00
# error "SHORT_BUILD_VERSION must be specified."
# elif !defined(DETAILED_BUILD_VERSION)
# error "BUILD_VERSION must be specified."
# elif !defined(STRING_DISTRIBUTION_DATE)
# error "STRING_DISTRIBUTION_DATE must be specified."
# elif !defined(PROTOCOL_VERSION)
# error "PROTOCOL_VERSION must be specified."
# elif !defined(MACHINE_NAME)
# error "MACHINE_NAME must be specified."
# elif !defined(SOURCE_CODE_URL)
# error "SOURCE_CODE_URL must be specified."
# elif !defined(DEFAULT_MACHINE_UUID)
# error "DEFAULT_MACHINE_UUID must be specified."
# elif !defined(WEBSITE_URL)
# error "WEBSITE_URL must be specified."
2016-04-22 10:07:26 -05:00
# endif
2015-10-03 01:08:58 -05:00
/**
* Dual Stepper Drivers
*/
2016-07-11 12:19:01 -05:00
# if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
# error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
# elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR)
# error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
# elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR)
# error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)."
# elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR)
# error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
2015-10-03 01:08:58 -05:00
# endif
/**
* Progress Bar
*/
# if ENABLED(LCD_PROGRESS_BAR)
# if DISABLED(SDSUPPORT)
2016-05-13 07:10:23 -05:00
# error "LCD_PROGRESS_BAR requires SDSUPPORT."
2015-10-03 01:08:58 -05:00
# endif
# if ENABLED(DOGLCD)
2016-05-13 07:10:23 -05:00
# error "LCD_PROGRESS_BAR does not apply to graphical displays."
2015-03-20 00:22:23 -05:00
# endif
2015-10-03 01:08:58 -05:00
# if ENABLED(FILAMENT_LCD_DISPLAY)
2016-05-13 07:10:23 -05:00
# error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
2015-10-03 01:08:58 -05:00
# endif
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
/**
* Babystepping
*/
# if ENABLED(BABYSTEPPING)
2016-03-11 02:49:06 -06:00
# if DISABLED(ULTRA_LCD)
2016-05-13 07:10:23 -05:00
# error "BABYSTEPPING requires an LCD controller."
2016-03-11 02:49:06 -06:00
# endif
2015-10-03 01:08:58 -05:00
# if ENABLED(SCARA)
2016-05-13 07:10:23 -05:00
# error "BABYSTEPPING is not implemented for SCARA yet."
2015-10-03 01:08:58 -05:00
# endif
# if ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
2016-05-13 07:10:23 -05:00
# error "BABYSTEPPING only implemented for Z axis on deltabots."
2015-10-03 01:08:58 -05:00
# endif
# endif
2015-03-20 00:22:23 -05:00
2016-06-19 20:05:57 -05:00
/**
2016-07-08 08:00:39 -05:00
* Filament Runout needs a pin and either SD Support or Auto print start detection
2016-06-19 20:05:57 -05:00
*/
# if ENABLED(FILAMENT_RUNOUT_SENSOR)
2016-06-19 21:25:09 -05:00
# if !HAS_FIL_RUNOUT
# error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
2016-07-08 08:00:39 -05:00
# elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
2016-07-09 04:34:42 -05:00
# error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
2016-06-19 20:05:57 -05:00
# endif
# endif
2015-10-03 01:08:58 -05:00
/**
* Filament Change with Extruder Runout Prevention
*/
2016-04-28 11:57:21 -05:00
# if ENABLED(FILAMENT_CHANGE_FEATURE) && ENABLED(EXTRUDER_RUNOUT_PREVENT)
# error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE."
2015-10-03 01:08:58 -05:00
# endif
2016-05-13 19:35:05 -05:00
/**
* Individual axis homing is useless for DELTAS
*/
# if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
2016-05-15 13:33:07 -05:00
# error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
2016-05-13 19:35:05 -05:00
# endif
2015-10-03 01:08:58 -05:00
/**
* Options only for EXTRUDERS > 1
*/
# if EXTRUDERS > 1
# if EXTRUDERS > 4
2016-05-13 07:10:23 -05:00
# error "The maximum number of EXTRUDERS in Marlin is 4."
2015-03-20 00:22:23 -05:00
# endif
2015-10-03 01:08:58 -05:00
# if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
2016-05-13 07:10:23 -05:00
# error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
2015-03-20 00:22:23 -05:00
# endif
2015-10-03 01:08:58 -05:00
# if ENABLED(HEATERS_PARALLEL)
2016-05-13 07:10:23 -05:00
# error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
2015-10-03 01:08:58 -05:00
# endif
2015-03-20 00:22:23 -05:00
2016-05-20 17:48:27 -05:00
# elif ENABLED(SINGLENOZZLE)
# error "SINGLENOZZLE requires 2 or more EXTRUDERS."
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
/**
* Limited number of servos
*/
# if defined(NUM_SERVOS) && NUM_SERVOS > 0
2016-06-13 22:18:24 -05:00
# if NUM_SERVOS > 4
# error "The maximum number of SERVOS in Marlin is 4."
2016-06-16 20:15:48 -05:00
# elif HAS_Z_SERVO_ENDSTOP && Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
2016-06-13 22:18:24 -05:00
# error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
2015-10-03 01:08:58 -05:00
# endif
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
/**
* Servo deactivation depends on servo endstops
*/
2016-06-16 20:15:48 -05:00
# if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP
2016-06-13 22:18:24 -05:00
# error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE."
2015-10-03 01:08:58 -05:00
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
/**
* Required LCD language
*/
2016-04-27 00:25:50 -05:00
# if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
2016-05-13 07:10:23 -05:00
# error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
2015-10-03 01:08:58 -05:00
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
/**
2016-03-25 21:05:31 -05:00
* Bed Heating Options - PID vs Limit Switching
2015-10-03 01:08:58 -05:00
*/
2016-03-25 21:05:31 -05:00
# if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
2016-05-13 07:10:23 -05:00
# error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
2016-03-25 21:05:31 -05:00
# endif
2016-02-19 23:02:01 -06:00
2016-03-25 21:05:31 -05:00
/**
* Mesh Bed Leveling
*/
2015-10-03 01:08:58 -05:00
# if ENABLED(MESH_BED_LEVELING)
# if ENABLED(DELTA)
2016-05-13 07:10:23 -05:00
# error "MESH_BED_LEVELING does not yet support DELTA printers."
2016-07-12 17:57:04 -05:00
# elif ENABLED(AUTO_BED_LEVELING_FEATURE)
2016-05-13 07:10:23 -05:00
# error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both."
2016-07-12 17:57:04 -05:00
# elif MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7
2016-05-13 07:10:23 -05:00
# error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8."
2015-07-15 18:08:26 -05:00
# endif
2016-02-20 22:21:34 -06:00
# elif ENABLED(MANUAL_BED_LEVELING)
2016-05-13 07:10:23 -05:00
# error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING."
2015-10-03 01:08:58 -05:00
# endif
2015-12-03 07:19:29 -06:00
/**
* Probes
*/
2016-05-03 22:15:18 -05:00
# if PROBE_SELECTED
2015-12-03 07:19:29 -06:00
2016-07-12 17:57:04 -05:00
# if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
# error "You cannot use Z_PROBE_SLED with DELTA."
# endif
2016-06-22 16:01:19 -05:00
/**
* NUM_SERVOS is required for a Z servo probe
*/
# if HAS_Z_SERVO_ENDSTOP
# ifndef NUM_SERVOS
# error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)."
# elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
# error "Z_ENDSTOP_SERVO_NR must be less than NUM_SERVOS."
# endif
# endif
2016-05-03 22:15:18 -05:00
/**
* A probe needs a pin
*/
# if !PROBE_PIN_CONFIGURED
2016-05-13 07:10:23 -05:00
# error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN."
2016-05-03 22:15:18 -05:00
# endif
2015-12-03 07:19:29 -06:00
2016-05-03 22:15:18 -05:00
/**
* Z_MIN_PIN and Z_MIN_PROBE_PIN can ' t co - exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
*/
# if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
2016-05-13 07:10:23 -05:00
# error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN."
2016-05-03 22:15:18 -05:00
# endif
2015-12-03 07:19:29 -06:00
2016-05-03 22:15:18 -05:00
/**
* Make sure the plug is enabled if it ' s used
*/
# if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG)
2016-05-13 07:10:23 -05:00
# error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug."
2016-05-03 22:15:18 -05:00
# endif
2015-12-03 07:19:29 -06:00
2016-05-03 22:15:18 -05:00
/**
* Only allow one probe option to be defined
*/
2016-06-22 19:11:49 -05:00
# if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))) \
2016-06-16 20:15:48 -05:00
| | ( ENABLED ( Z_PROBE_ALLEN_KEY ) & & ( HAS_Z_SERVO_ENDSTOP | | ENABLED ( Z_PROBE_SLED ) ) ) \
| | ( HAS_Z_SERVO_ENDSTOP & & ENABLED ( Z_PROBE_SLED ) )
2016-06-22 19:11:49 -05:00
# error "Please define only one type of probe: Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
2016-05-03 22:15:18 -05:00
# endif
2015-07-15 18:08:26 -05:00
2015-03-20 00:22:23 -05:00
/**
2016-05-03 22:15:18 -05:00
* Don ' t allow nonsense probe - pin settings
2015-03-20 00:22:23 -05:00
*/
2016-05-03 22:15:18 -05:00
# if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(Z_MIN_PROBE_ENDSTOP)
2016-05-08 20:08:39 -05:00
# error "You can't enable both Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN and Z_MIN_PROBE_ENDSTOP."
2016-05-03 22:15:18 -05:00
# elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)
2016-05-08 20:08:39 -05:00
# error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
2016-05-03 22:15:18 -05:00
# elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP)
2016-05-13 07:10:23 -05:00
# error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set."
2015-03-20 00:22:23 -05:00
# endif
2015-04-07 15:58:08 -05:00
/**
2015-10-03 01:08:58 -05:00
* Require a Z probe pin if Z_MIN_PROBE_ENDSTOP is enabled .
2015-04-07 15:58:08 -05:00
*/
2015-10-03 01:08:58 -05:00
# if ENABLED(Z_MIN_PROBE_ENDSTOP)
2016-05-03 22:15:18 -05:00
# if !HAS_Z_MIN_PROBE_PIN
2016-05-08 20:08:39 -05:00
# error "Z_MIN_PROBE_ENDSTOP requires a Z_MIN_PROBE_PIN in your board's pins_XXXX.h file."
2015-04-08 13:52:48 -05:00
# endif
2015-10-03 01:08:58 -05:00
// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
//#ifndef NUM_SERVOS
2016-05-13 07:10:23 -05:00
// #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP."
2015-10-03 01:08:58 -05:00
//#endif
//#if defined(NUM_SERVOS) && NUM_SERVOS < 1
2016-05-13 07:10:23 -05:00
// #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP."
2015-10-03 01:08:58 -05:00
//#endif
//#if Z_ENDSTOP_SERVO_NR < 0
2016-05-13 07:10:23 -05:00
// #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP."
2015-10-03 01:08:58 -05:00
//#endif
2016-06-13 22:18:24 -05:00
//#ifndef Z_SERVO_ANGLES
// #error "You must have Z_SERVO_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP."
2015-10-03 01:08:58 -05:00
//#endif
2015-04-07 15:58:08 -05:00
# endif
2016-05-03 22:15:18 -05:00
2016-07-05 22:09:30 -05:00
/**
* Make sure Z raise values are set
*/
# if defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
# error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_RAISE_PROBE_DEPLOY_STOW instead."
# elif !defined(Z_RAISE_PROBE_DEPLOY_STOW)
# error "You must set Z_RAISE_PROBE_DEPLOY_STOW in your configuration."
# elif !defined(Z_RAISE_BETWEEN_PROBINGS)
# error "You must set Z_RAISE_BETWEEN_PROBINGS in your configuration."
# elif Z_RAISE_PROBE_DEPLOY_STOW < 1
# error "Probes need Z_RAISE_PROBE_DEPLOY_STOW >= 1."
# elif Z_RAISE_BETWEEN_PROBINGS < 1
# error "Probes need Z_RAISE_BETWEEN_PROBINGS >= 1."
# endif
2016-05-03 22:15:18 -05:00
# else
/**
2016-06-21 03:28:36 -05:00
* Require some kind of probe for bed leveling and probe testing
2016-05-03 22:15:18 -05:00
*/
# if ENABLED(AUTO_BED_LEVELING_FEATURE)
2016-06-22 19:11:49 -05:00
# error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
2016-06-21 03:28:36 -05:00
# elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
2016-06-22 19:11:49 -05:00
# error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
2016-05-03 22:15:18 -05:00
# endif
# endif
/**
* Auto Bed Leveling
*/
# if ENABLED(AUTO_BED_LEVELING_FEATURE)
2016-07-12 17:57:04 -05:00
/**
* Delta has limited bed leveling options
*/
# if ENABLED(DELTA) && DISABLED(AUTO_BED_LEVELING_GRID)
# error "You must use AUTO_BED_LEVELING_GRID for DELTA bed leveling."
# endif
2016-05-03 22:15:18 -05:00
/**
* Require a Z min pin
*/
# if !PIN_EXISTS(Z_MIN)
# if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it.
2016-06-21 03:28:36 -05:00
# error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin."
2016-05-03 22:15:18 -05:00
# endif
# endif
2015-03-20 00:22:23 -05:00
/**
2015-10-03 01:08:58 -05:00
* Check if Probe_Offset * Grid Points is greater than Probing Range
2015-03-20 00:22:23 -05:00
*/
2015-10-03 01:08:58 -05:00
# if ENABLED(AUTO_BED_LEVELING_GRID)
2016-03-24 12:13:37 -05:00
# ifndef DELTA_PROBEABLE_RADIUS
2015-10-03 01:08:58 -05:00
// Be sure points are in the right order
# if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
2016-05-13 07:10:23 -05:00
# error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."
2015-10-03 01:08:58 -05:00
# elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
2016-05-13 07:10:23 -05:00
# error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."
2015-03-20 00:22:23 -05:00
# endif
2015-10-03 01:08:58 -05:00
// Make sure probing points are reachable
# if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
# error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe."
# elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
# error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe."
# elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
# error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe."
# elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
# error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe."
2015-03-28 06:08:04 -05:00
# endif
# endif
2015-10-03 01:08:58 -05:00
# else // !AUTO_BED_LEVELING_GRID
// Check the triangulation points
# if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X
# error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe."
# elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X
# error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe."
# elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X
# error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe."
# elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y
# error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe."
# elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y
# error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe."
# elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y
# error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe."
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
# endif // !AUTO_BED_LEVELING_GRID
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
# endif // AUTO_BED_LEVELING_FEATURE
2015-03-20 00:22:23 -05:00
2016-05-04 14:10:42 -05:00
/**
* Advance Extrusion
*/
# if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE)
2016-05-15 13:33:07 -05:00
# error "You can enable ADVANCE or LIN_ADVANCE, but not both."
2016-05-04 14:10:42 -05:00
# endif
2016-03-29 22:28:23 -05:00
/**
* Filament Width Sensor
*/
# if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
2016-05-13 07:10:23 -05:00
# error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
2016-03-29 22:28:23 -05:00
# endif
2015-10-03 01:08:58 -05:00
/**
* ULTIPANEL encoder
*/
# if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
2016-05-13 07:10:23 -05:00
# error "ULTIPANEL requires some kind of encoder."
2015-10-03 01:08:58 -05:00
# endif
2015-03-20 00:22:23 -05:00
2016-04-14 10:20:17 -05:00
# if ENCODER_PULSES_PER_STEP < 0
2016-06-02 16:35:14 -05:00
# error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
# endif
/**
* SAV_3DGLCD display options
*/
# if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
# error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
2016-04-14 10:20:17 -05:00
# endif
2016-05-20 15:28:00 -05:00
/**
* Don ' t set more than one kinematic type
*/
# if (ENABLED(DELTA) && (ENABLED(SCARA) || ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \
| | ( ENABLED ( SCARA ) & & ( ENABLED ( COREXY ) | | ENABLED ( COREXZ ) | | ENABLED ( COREYZ ) ) ) \
| | ( ENABLED ( COREXY ) & & ( ENABLED ( COREXZ ) | | ENABLED ( COREYZ ) ) ) \
| | ( ENABLED ( COREXZ ) & & ENABLED ( COREYZ ) )
# error "Please enable only one of DELTA, SCARA, COREXY, COREXZ, or COREYZ."
# endif
2015-10-03 01:08:58 -05:00
/**
2016-07-05 20:40:21 -05:00
* Allen Key
* Deploying the Allen Key probe uses big moves in z direction . Too dangerous for an unhomed z - axis .
2015-10-03 01:08:58 -05:00
*/
2016-07-05 20:40:21 -05:00
# if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
# error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY"
2015-10-03 01:08:58 -05:00
# endif
2015-03-20 00:22:23 -05:00
2015-10-03 01:08:58 -05:00
/**
* Dual X Carriage requirements
*/
# if ENABLED(DUAL_X_CARRIAGE)
2016-05-18 17:59:28 -05:00
# if EXTRUDERS == 1
# error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
# elif ENABLED(COREXY) || ENABLED(COREXZ)
# error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ."
# elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR
# error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
# elif !HAS_X_MAX
# error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
# elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
# error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
# elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
# error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
2015-04-03 17:31:35 -05:00
# endif
2015-10-03 01:08:58 -05:00
# endif // DUAL_X_CARRIAGE
2015-04-03 17:31:35 -05:00
2015-10-03 01:08:58 -05:00
/**
* Make sure auto fan pins don ' t conflict with the fan pin
*/
2016-03-05 20:27:45 -06:00
# if HAS_AUTO_FAN
# if HAS_FAN0
# if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN."
2016-03-05 20:27:45 -06:00
# elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN."
2016-03-05 20:27:45 -06:00
# elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN."
2016-03-05 20:27:45 -06:00
# elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN."
2016-03-05 20:27:45 -06:00
# endif
2015-07-27 03:16:59 -05:00
# endif
2015-10-03 01:08:58 -05:00
# endif
2015-07-27 03:16:59 -05:00
2016-03-05 20:27:45 -06:00
# if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN."
2015-10-03 01:08:58 -05:00
# endif
2015-07-27 03:16:59 -05:00
2016-03-05 20:27:45 -06:00
# if HAS_CONTROLLERFAN
# if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
2016-03-05 20:27:45 -06:00
# elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
2016-03-05 20:27:45 -06:00
# elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
2016-03-05 20:27:45 -06:00
# elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
2016-05-13 07:10:23 -05:00
# error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
2016-03-05 20:27:45 -06:00
# endif
# endif
2015-10-03 01:08:58 -05:00
/**
* Test Heater , Temp Sensor , and Extruder Pins ; Sensor Type must also be set .
*/
2016-05-26 19:43:20 -05:00
# if !HAS_HEATER_0
# error "HEATER_0_PIN not defined for this board."
# elif !PIN_EXISTS(TEMP_0)
# error "TEMP_0_PIN not defined for this board."
# elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
# error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
# elif TEMP_SENSOR_0 == 0
# error "TEMP_SENSOR_0 is required."
# endif
# if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
# if !HAS_HEATER_1
# error "HEATER_1_PIN not defined for this board."
2015-10-03 01:08:58 -05:00
# endif
2016-05-26 19:43:20 -05:00
# endif
# if HOTENDS > 1
2016-04-05 18:17:28 -05:00
# if TEMP_SENSOR_1 == 0
2016-05-26 19:43:20 -05:00
# error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
2016-04-05 18:17:28 -05:00
# elif !PIN_EXISTS(TEMP_1)
2016-05-13 07:10:23 -05:00
# error "TEMP_1_PIN not defined for this board."
2015-10-03 01:08:58 -05:00
# endif
2016-05-26 19:43:20 -05:00
# if HOTENDS > 2
# if TEMP_SENSOR_2 == 0
# error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
# elif !HAS_HEATER_2
# error "HEATER_2_PIN not defined for this board."
# elif !PIN_EXISTS(TEMP_2)
# error "TEMP_2_PIN not defined for this board."
# endif
# if HOTENDS > 3
# if TEMP_SENSOR_3 == 0
# error "TEMP_SENSOR_3 is required with 4 HOTENDS."
# elif !HAS_HEATER_3
# error "HEATER_3_PIN not defined for this board."
# elif !PIN_EXISTS(TEMP_3)
# error "TEMP_3_PIN not defined for this board."
# endif
# endif
2015-07-24 17:53:14 -05:00
# endif
2015-10-03 01:08:58 -05:00
# endif
2015-03-20 00:22:23 -05:00
2016-04-05 18:17:28 -05:00
# if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
2016-05-13 07:10:23 -05:00
# error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
2015-10-03 01:08:58 -05:00
# endif
2016-05-26 19:43:20 -05:00
/**
* Test Extruder Pins
*/
# if EXTRUDERS > 3
# if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
2016-05-15 13:33:07 -05:00
# error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
2016-05-26 19:43:20 -05:00
# endif
# elif EXTRUDERS > 2
# if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
2016-05-15 13:33:07 -05:00
# error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
2016-05-26 19:43:20 -05:00
# endif
# elif EXTRUDERS > 1
# if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
2016-05-15 13:33:07 -05:00
# error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
2016-05-26 19:43:20 -05:00
# endif
2015-10-03 01:08:58 -05:00
# endif
2016-03-02 04:00:34 -06:00
/**
* Endstops
*/
2016-03-02 23:06:15 -06:00
# if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_)
2016-05-13 07:10:23 -05:00
# error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG"
2016-03-02 23:06:15 -06:00
# elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_)
2016-05-13 07:10:23 -05:00
# error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG"
2016-03-02 23:06:15 -06:00
# elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_)
2016-05-13 07:10:23 -05:00
# error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG"
2016-03-02 23:06:15 -06:00
# elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP
2016-05-13 07:10:23 -05:00
# error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS"
2016-03-02 04:00:34 -06:00
# endif
2015-10-03 01:08:58 -05:00
/**
Add an emergency-command parser to MarlinSerial (supporting M108)
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
2016-07-04 16:23:22 -05:00
* emergency - command parser
*/
# if ENABLED(EMERGENCY_PARSER) && ENABLED(USBCON)
# error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
# endif
/**
2015-10-03 01:08:58 -05:00
* Warnings for old configurations
*/
# if WATCH_TEMP_PERIOD > 500
2016-05-13 07:10:23 -05:00
# error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
2015-10-03 01:08:58 -05:00
# elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
2016-05-13 07:10:23 -05:00
# error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
2015-10-03 01:08:58 -05:00
# elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
2016-05-13 07:10:23 -05:00
# error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
2015-10-03 01:08:58 -05:00
# elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE)
# error "Z_LATE_ENABLE can't be used with COREXZ."
# elif defined(X_HOME_RETRACT_MM)
2016-05-13 07:10:23 -05:00
# error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
2015-10-03 01:08:58 -05:00
# elif defined(BEEPER)
2016-05-13 07:10:23 -05:00
# error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
2015-10-03 01:08:58 -05:00
# elif defined(SDCARDDETECT)
2016-05-13 07:10:23 -05:00
# error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
2015-10-03 01:08:58 -05:00
# elif defined(SDCARDDETECTINVERTED)
2016-05-13 07:10:23 -05:00
# error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
2015-10-03 01:08:58 -05:00
# elif defined(BTENABLED)
2016-05-13 07:10:23 -05:00
# error "BTENABLED is now BLUETOOTH. Please update your configuration."
2015-10-03 01:08:58 -05:00
# elif defined(CUSTOM_MENDEL_NAME)
2016-05-13 07:10:23 -05:00
# error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
2015-10-03 01:08:58 -05:00
# elif defined(HAS_AUTOMATIC_VERSIONING)
2016-05-13 07:10:23 -05:00
# error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
2015-10-03 01:08:58 -05:00
# elif defined(ENABLE_AUTO_BED_LEVELING)
2016-05-13 07:10:23 -05:00
# error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration."
2016-02-06 23:18:02 -06:00
# elif defined(SDSLOW)
2016-05-13 07:10:23 -05:00
# error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
2016-02-06 23:18:02 -06:00
# elif defined(SDEXTRASLOW)
2016-05-13 07:10:23 -05:00
# error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
2016-03-08 10:50:23 -06:00
# elif defined(Z_RAISE_BEFORE_HOMING)
2016-05-13 07:10:23 -05:00
# error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead."
2016-03-29 22:28:23 -05:00
# elif defined(FILAMENT_SENSOR)
2016-05-13 07:10:23 -05:00
# error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
2016-03-02 04:00:34 -06:00
# elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
2016-05-13 07:10:23 -05:00
# error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
2016-03-02 04:05:21 -06:00
# elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
2016-05-13 07:10:23 -05:00
# error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
2016-04-27 01:32:15 -05:00
# elif defined(LANGUAGE_INCLUDE)
2016-05-13 07:10:23 -05:00
# error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
2016-05-26 19:43:20 -05:00
# elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
# error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
# elif defined(PID_PARAMS_PER_EXTRUDER)
# error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
# elif defined(EXTRUDER_WATTS)
# error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead."
2016-06-13 22:18:24 -05:00
# elif defined(SERVO_ENDSTOP_ANGLES)
# error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
# elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
# error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
2016-06-22 04:38:50 -05:00
# elif defined(XY_TRAVEL_SPEED)
# error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
2016-06-23 16:33:29 -05:00
# elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
# error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
# elif defined(SERVO_DEACTIVATION_DELAY)
# error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
2016-04-28 11:57:21 -05:00
# elif ENABLED(FILAMENTCHANGEENABLE)
# error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
2016-07-09 17:20:12 -05:00
# elif defined(PLA_PREHEAT_HOTEND_TEMP)
# error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
# elif defined(PLA_PREHEAT_HPB_TEMP)
# error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
# elif defined(PLA_PREHEAT_FAN_SPEED)
# error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
# elif defined(ABS_PREHEAT_HOTEND_TEMP)
# error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
# elif defined(ABS_PREHEAT_HPB_TEMP)
# error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
# elif defined(ABS_PREHEAT_FAN_SPEED)
# error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
2015-10-03 01:08:58 -05:00
# endif
2015-08-01 09:57:59 -05:00
2016-06-15 23:18:44 -05:00
/**
* Nozzle cleaning
*/
2016-07-13 18:07:36 -05:00
# if ENABLED(NOZZLE_CLEAN_FEATURE) && !HAS_BED_PROBE
# error Due to internal dependencies you must have a bed probe for NOZZLE_CLEAN_FEATURE to work
2016-06-15 23:18:44 -05:00
# endif
2015-03-20 00:22:23 -05:00
# endif //SANITYCHECK_H